Discoloration on the edge of an image to 100% transparency

Similar Questions

• S2440L, discoloration along the edge of the screen

  I noticed a problem on my dell s2440l. It seems to be a change in color even along the edge of the screen. It is difficult to explain or to capture on camera. It is more noticeable on the shades of gray. Just check along the border of the screen in the picture. Any idea on what this could be?

  The question is called "Frame shadow" and occurs over time. If still under warranty to the original purchase of Dell, Dell will Exchange it.

• How can I replace or modify the colors in this image, to preserve transparency (resulting in different colors, where the colors meet)?

  

  It is a series of using channels to make choices and requires that each color you want to select a slightly different way to select colors. for example, to select, I illustrate how to get red of this image:

  I just realized that you don't have turn off the layers.

  

  Cmd/Ctrl-clicking on the icon of the Green chain to get this catalog it will be reversed of what you want, but don't worry about this now.

  

  CTRL/cmd-shift click on the blue channel:

  

  At this point, press ctrl/cmd-shift-i to invert the selection. Ctrl/cmd-alt/opt-SHIFT-click the icon of the red chanel will:

  You now have a selection of just the Red areas. Make new layer and who fill it with the color you want. Do this for all the other colors you want to isolate. you have to play to see what combinations of selections will work with each.

  

• Part of the erasure. JPG image and achieve transparency?

  Hi-

  What's the trick more simple to do transparent white mirror, so I can place it on the background image?

  Thank you

  

  If you really must do it entirely in Illustrator, you can either 1) hide the image using the Panel transparency; or (2) you can do it with a clipping mask.

  To achieve this by using all the techniques, you will have to trace the contour of the mirror first and then black paint. Then:

  (1) position way to contour of the mirror above the image, make a rectangle that is larger than your image, select both and combine them (Ctrl/Cmd + 8). Then place the traces on the image, and in the Transparrency Panel, choose "Make mask". Don't forget to check the Panel "Clip" and "invert the mask.

  or

  (2) take the contours of the mirror and the rectangle, select them and choose Create a compound path (the mirror area should be gently from the image). From there, select path and image and group them. Then you can select the Group and, in the layers panel fly-out, click Create/cancel clipping mask.

  There you have it. The two techiniques have ups and downs, give it a try.

  Kind regards

  Eduardo Moura

• Follow the wire at the edge of images

  Hi all

  I have tried this, but couldn't find an answer.

  I need to do a removal of CC Simple wire on a piece of film and I would like to be able to follow the two points of the wire. The point where the wire is attached to the object is in the frame and easy to follow, but I need to know how to follow the point of intersection of the wire on the edge of the screen. The tracker doesn't seem to be able to understand that I want only it lock onto the edge of the image.

  Any help appreciated.

  Thank you.

  The tracker doesn't seem to be able to understand that I want only it lock onto the edge of the image.

  Should not, because it is strictly operates on images and does not care about the edges of the computer or whatever. However, it takes cheating forward to compose your work to a larger model in which a contrasting solid is under your other videos so there is a visible edge. Then the demo can be used as a layer and followed. When done right, you should be able to use the copy & paste keyframes to get your positions and use it on a simplified version of the layer. Otherwise you can of course always 'crop' in advance dial again to a model of appropriate size.

  Mylenium

• Adobe Muse hyperlink only actviates on the edge of the image

  When the cursor is in the center of the image, the hyperlink will not be activated. It is only on the edge of razors of the image. Any help is appreciated great.

  You probably have an invisible element or something on top of your image. Do a select all to highlight all the elements on the page and check that you have all of the empty elements during the installation. Like maybe a text box which is bigger it must be.

  Can you provide a link?

• Lock the images to the edge of the browser?  Is this possible with the Muse

  Can someone tell me how to lock and image to the edge right and left of the browser window?  I have pictures that I want to appear as if they come out on the side of the browser on both sides.

  In Muse I placed these images at the edge of the browser window and the 'line' goes red, I thought meant lock to the size of the browser.  However, this is not what is happening.  It seems in Muse, but when I download on my server the images float in the middle of the screen.

  Is there a solution to make it work?

  Thank you.

  Fixed!

  Im not a web guru, but I figuered how to solve this isue on cc updated muse 2015

  Go to the properties of the page

  Uncheck the Center horizontally

  and the padding value 100 left

  I did and once I started to draw inside the box everything has started to align with the left right etc..

  hope this helped...

• Cropping tool magnetic snaps at the edge of the image

  The truncation tool magnetically clings to the edge of the image. Quite often, I need to remove a few lines of pixels from the edge of the image. Because of this feature to hang, this task can be frustrating: we can't GET the tool you want, he will jump on the edge.

  This function has bugged me since I use photoshop. Is it possible to turn this off, or work around this problem?

  Disable snap. View > snap. You can also disable individual items to slam in view > snap to > guides / layers / limits of document / etc.

• problems of magnetic lasso on the edge of the photo

  When I use the magnetic lasso lens around a large band of my picture which goes up to the edge of the frame, it will not always stay along the edge, but instead the lasso will creep into the picture here and there, often to ruin all the effect I'm trying to achieve.  Is there a way to be part of the lasso magnetic lens just a straight line. at least along the edge of the image?  Thank you.

  Hello!

  If you hold down the SHIFT key while drawing with the magnetic Lasso took, he will give a straight line you draw and got to jump all over the place.

  In addition, you can use the SHIFT key to add to your selection with the magnetic (all selection tools and lasso). Just hold theShift and draw around the area that you have missed making the selection.

  Blessings,

  Michelle

• Key challenges of chroma with areas of the screen no green images

  Hi all

  I have a small studio space, so when I have green screen, I always try to do shots I can't answer very well. The most recent example are these shots of my subject by behind. I move the camera more near the end of shooting.

  As you can see in these images, I captured content beyond the borders of the green screen.

  

  And I'm zooming, so before the end of shooting, it is looking like this:

  

  No matter what I try (rotation of the pen, mask, Matt track tool) I can not understand how to deal with this photo. Roto pen doesn't let me keep green all about my topic. What I'm trying to expand the selection (roto border isn't clean - it is the cut in the edges all around):

  

  .. .unhelpfully expands my selection completely to the edge of the screen. If I just disregard his right shoulder by millimeters, I get this:

  

  This sequence is of course far from ideal, but I can't understand this. I spent hours trying different things without success.

  All I'm trying to do is capture my subject with a bit of the green screen still around it, so I can remove that in a later step and have the images of the intact object with a transparent background.

  If I'm following Matt up, the selected area becomes my background, instead of being always about me. It is a task in the form of subject from my background, lol.

  Can anyone here feel sorry for this newb and guide me through what an expert can perform to process these images and crop the area of non-green screen images?

  Thank you

  Bill

  Approach quite wrong. Before composing the images and inside the demo clip away anything outside the green screen using a mask base. Then try to extract a specific string based on the green (effects of use layers or the old base, Keylight not masking effects!) and refine the result using other effects, then apply it as a cache.

  Mylenium

• Blur masking before editting to improve the edge contour

  Hello

  Recently, when I try to hide it in Photoshop CC edge does not know / not sharp like this:

  

  

  I use HD images and the quick selection tool to select the mask. I do not edit anything if I click on the mask to refine it, it just that way rather than a strong shows

  the edge that I could handle. Is there something in my settings, I missed?

  Hi aryamaiy,

  Try to use the Polygonal Lasso tool in hand instead of the Quick Selection tool.

  See the example: selecting hair with refine edge in Photoshop CS5

  Kind regards

  ~ Mohit

• How can I draw a line around the edge of a piece of property that I shot a video clip of 13 elements?

  How can I draw a line around the edge of a piece of real estate in a video clip with 13 elements?

  KING OF THE SKY

  First 13 items on what operating system? Have you updated 13 to 13.1 still using Help Menu/updates to date of an open project?

  Your question immediately... you could try something like this

  In this scenario, you start with your video on video 1 track with the Timeline indicator placed in the appropriate location of content timeline.

  The Titler line file created will be automatically placed at the position of the indicator in the timeline.

  Text Menu/New/default of titration / and select the Section forms.

  The Titler file goes to Video Track 2 above the video on the video 1 track.

  Select the line tool in the section shapes and draw your line on screen correspond to the where you want it to appear in the video below.

  Your image of the line is the line on transparent background where the content below shows through the transparent areas in this image of the line.

  Please consider. If any questions or need any clarification on the above, do not hesitate to ask.

  Thank you.

  RTA

• Smooth the edge of a selection, updated the

  Hi all

  I want to work light and color on a selection of my photos, so I cut the selection and pasted into a new layer and then with adjustments (with the Camera Raw filter). But it really shows on the edge of the room, I chose, as if the image was 'overlaid' on the bottom rather than "disappeared" in IT... How can I fix it?

  Thanks in advance!

  Guillaume

  Blur the mask layer or use the tool to refine the edges. And you can read on how to do it 'the right way' using complete layers, of modes and layer masks rather than using the selections.

  Mylenium

• removal tool to the spot on the edge of the merged panorama

  Using LR6 to create a merged file DNG several jpgs that were shot in my Pocket I took the resulting DNG cropped and enlarge the area to harvest a bit there are white areas at the top and bottom of the photo (exact original photos match, and I want to include all original parts). Trying to fill the empty spaces by using the Spot removal tool. It works as expected inside the photo, but if the target box contains one of the pristine area, do not 'copy' of the source pixels. It stops exactly at the edge of the original photos and refuses to pay in the empty area of the photo have merged. Workaround was to export/import a JPG file and edit this file. Anyone else see this behavior? Seems like a bug to me.

  Without getting into the semantics of "bug", LR behaves as expected by its developers.  But a number of people have requested the opportunity to fill the edges with the tool clone, and Eric Chan (senior developer of Adobe) says:

  We will investigate how to improve this in the future, but for now the best solution is to 'fill' the edges using Photoshop, or "round-trip" the image in Lightroom.

  "Round trip", it means export TIFF or JPEG image and then re-import.

  Please add your vote and opinion on this in the Adobe official feedback forum: Lightroom 6: Clone Brush ineffective on the white edges of the Panorama.

• Gray border/purge lining at the edge of the document (InDesign > Acrobat)

  See the image below, I saw trouble with InDesign, it continues to create a grey border on the edge of any document, but only on the left side? There is no background settings lost and the line is not physically there. But easily identifiable when opened in Acrobat.

  Grey on each side of the document is the bottom panel by default acrobat, you can see the right side of the document is seamless with the rear panel, the left clearly shows that this line of mystery. Is it maybe something to do with overprint/pixel-perfection? Thanks in advance community.

  
  

  Machine: Win8.1 InDesign/Acrobat PRO DC CC 2015.

  

  Sorry, they are terrible,

  Attached 2 screenshots of the files that were exported with the same exact settings but with Acrobat PRO DC running in the background and the other without. It seemed Acrobat PRO DC in the background while that export from InDesign caused the top/left border gray running. Perhaps the questions is the option ' show them after have exported them? Do not hesitate to try to reproduce the problem, let me know your results

  Mar