help config VLANs and inter routing VLANs on SF - 300
Hi all.
I divided the routing problem "SF-300 (Layer 3) can be connected to the bridge." I did not put in the entry door. Too bad, I have encountered with Packet Tracer 5. I can attach a file. Leave everything to me.
Thank you.
# config - code
IP routing
VLAN 10
VLAN 20
VLAN 30
interface FastEthernet0/1
switchport access vlan 10
switchport mode access
interface FastEthernet0/6
switchport access vlan 20
switchport mode access
interface FastEthernet0/11
switchport access vlan 30
switchport mode access
interface Vlan10
IP 192.168.10.1 255.255.255.0
interface Vlan20
address 192.168.20.1 255.255.255.0
Vlan30 interface
192.168.30.1 IP address 255.255.255.0
The configuration of the switch is fine. My only question is your computers. Example of
Computer on fa1.
Should be something like
192.168.10.100
255.255.255.0
192.168.10.1
Computer on Fa6
192.168.20.100
192.168.20.1
255.255.255.0
Also avoid any simultaneous wireless connection and you may want to disable things like firewalls of the window.
-Tom
Please mark replied messages useful
Tags: Cisco Support
Similar Questions
-
I got a new modem and the router and now I can't print wireless.
I have a Photosmart 8450 printer. My operating system is Windows7. I tried to follow the Scan doctor, but I guess I'm not tech savy enough to understand. It worked fine before the new modem and the router. She is 'offline' and I can't understand how to put line. Thanks for any help and easy enough for me to follow.
Hello raedene715.
Thanks for the transcript, it was useful.
Please, check the network cables and connections (side of the printer and router). If possible, try a different network cable.
See you soon!
-
Presented labtop parents and can connect via ethernet, but still cannot connect to the wireless router. Ive rebooted both the modem and the router and ive also unplugged the power source. Help, please...
original title: unable to connect to the wireless router?Hi Brandon,.
What operating system do you use? (Windows 7, Vista, XP?)You receive any type of error message when you try to connect?What exactly happens when you try to connect?You receive an internet connection when you connect with an Ethernet cable?There are a few good troubleshooting in this thread. I suggest to look to see if it helps at all: -
Network Magic and Cisco router EA4500 UID and password
I use the 5.5.9150.0 version of the free product. I had my last router, with a WRT400N. Since then, I have installed an EA4500 router to replace the WRT400N. I'm glad that Network Magic works with my new router, but I have a problem: I can't connect to my router via Netowrk Magic.
Protection status/Wireless / Wireless Protection settings brings up a window that asks you the router user name and the password. I went to the page "Setting Up: Basics" guide of the user EA4500 (page 13) and tried all the values that I had copied in when I installed the router.
I tried the SSID of the router and the "Linksys Smart Wi - Fi Username ' in the user ID box.
I tried the "Linksys Smart WIFI password", the network, the Guest network password password and the router password (same as the network password).
Nothing has worked. I've only connected to the EA4500 using the Linksys Smart WiFi, username and password, so I'm stuck trying to figure what values to use.
Please help me understand what I am doing wrong. Thank you!
I stumbled in the response:
1. start Network Magic and display the network map.
2. click on the name of the router (just under the router icon).
3. click on Set Up or manage the device.
4. the Linksys WiFi Smart Sign In (to the router) window appears.
5 connect to the router by using the credentials of Smart Wi - Fi that you set up when you have installed the router.
Now, all router commands will work from within Network Magic.
:+)
-
Problem with access to the camera on the net via dsl modem and linksys router
OK, I read all posts here on what to do in this case and think I have tried everything. I have an Actiontec dsl (verizon) and a v2 wrt110 router. I can see the camera locally, but not on the net. I had it hooked to another place but with cable service broadband with no problems.
I think that the problem of my lie with ip addresses.
Camera 192.168.0.115
Router 192.168.0.1
Modem 192.168.1.1
The port forwards on the modem MUST be set to port forward to the IP Address of the Linksys router. It should be only the modem IP can see, so it's the only place you can move forward from the modem. What exactly is in this drop-down list in the config of the modem port forwarding?
The problem is that there are two distinct here networks once you are inside your modem. There is a network between the modem and the router. Allthat is on it is the modem's ethernet interface and the port of the Internet router (or WAN). There is another network on the side the router as your PC's LAN, camera, etc. are on. All know the modem is how to get to the network to which it is directly connected to. While you could add a route staic on the modem to tell him how to get to this network, the modem must still know I have oprt route traffic to your camera to the router.
-
Help for my new E2500 router port forwarding
My hosting web home used to work. But due to new ISP from Verizon to TWC, TWC gave me a modem-router and I bought my own router Linksys E2500. Verizon and services of TWC, that I subscribed are dynamic IP address. I use a third party to redirect web traffic to my house.
TWC gave me a simple modem-router in one box. An entry is coaxial and outputs are 4 ethernet ports. I use one of the 4 outputs of the TWC ethernet box to connect to the internet the E2500 input ethernet port. All my sons and wireless devices are now feeding the E2500. All wireless and wireline devices works and can surf the internet through the E2500.
I have assigned to one computer as the web server and the internal IP Address of this computer as 192.168.1.128 addess. The same goes for the installer with Verizon before.
I loaded him comes from CD with the router E2500 and see the LAN 192.168.1.128.
My problem starts from there, I do not know how to set the port in E2500 192.168.1.128 to web traffic
1. using the CD E2500, I click on 'APPLICATION AND GAMES', then 'SIMPLE PORT FORWARDING'. under the NAME of the APPLICATION, I select one box for HTTP and type in 128 under "IP ADDRESS". I then click on ACTIVE, then 'save settings '. The 192.168.1 is set in this window, I can type only 128.
It does not work. I can browse the internet, but can not access my site of all machines using domain name.
Then I tried:
2 to point 1 above, I continued to Setup > BASIC SETUP > DHCP RESEVERSATION. I can see the name of calculation/sever and the 192.168.1.128. Then, I click on the "select" and save the customer.
I rebooted the computer/server, I disconnect and reconnect power E2500. I check the internal IP address of the server, and it's always the same. But I can't just browse my site. I can browse other places.
No idea what's wrong on my fault? Help, please.
Your modem is a router. All incoming internet requests end up on the modem/router. You must configure the port forwarding on the modem/router first before the E2500 will see nothing incoming from the internet.
Alternatives:
1. turn the modem/router mode 'bridge', which turns into a simple modem. You can connect directly to the internet with your E2500.
2. place the E2500 as simple access point and keep the modem/router as your main and single router. Then any transmission is made on the modem/router.
-
Static and NAT router to router VPN
Hello
I have two site VPN using routers. The VPN is fine, BUT - at the end of the seat, the customer has NAT entries static to allow incoming connections - any service that has a NAT static to allow incoming connections from the Internet is inaccessible in the same way. Ping, for example, doesn't have this problem because there is no static NAT entry. I tried to configure a route map-"No. - nat" according to the http://www.cisco.com/en/US/partner/tech/tk583/tk372/technologies_configuration_example09186a00800949ef.shtml , I thought I was working.
H.O. has the IP 131.203.64.0/24 and 135.0.0.0/24 (I know, I know - I'm trying to change), and the R.O. 192.168.1.0/24.
Bits of configuration:
IP nat inside source overload map route SHEEP interface Ethernet0
IP nat inside source static tcp 135.0.0.248 131.203.100.27 3389 3389 extensible
(other static removed)
Int-E0-In extended IP access list
ip permit 192.168.1.0 0.0.0.255 any
(other entries deleted)
access-list 198 deny ip 131.203.64.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 198 deny ip 135.0.0.0 0.0.0.255 192.168.1.0 0.0.0.255
access-list 198 allow ip 135.0.0.0 0.0.0.255 any
SHEEP allowed 10 route map
corresponds to the IP 198
1 remove the static entry for the specified host the VPN problem, but obviously breaks things :(
2. as mentioned, the VPN itself works fine, I can ping hosts perfectly.
Any help greatly appreciated :)
Thank you
Mike.
You must use the option of the route to the static NAT map. This is a new feature in 12.2 (4) T according to this page:
http://www.Cisco.com/univercd/CC/TD/doc/product/software/ios123/123cgcr/ipras_r/ip1_i2g.htm#1079180
He must do exactly what you want. The old, another way to do is use "The thing", where you create a loopback interface and don't make a nat interface and use routing strategy for routing VPN traffic to one address on the same subnet as the loopback interface, but not the address of the loop. IOS then that réacheminera traffic to the real destination (in this case the remote VPN site), but since now it is not a 'ip nat inside' interface, the static nat translations does not apply and the VPN traffic will not be translated. The problem with this solution is that all loopback traffic is switched to the process, so it is a bit of a hack, but these things are sometimes necessary.
HTH
-
VPN site to Site btw Pix535 and 2811 router, can't get to work
Hi, everyone, I spent a few days doing a VPN site-to site between PIX535 and 2811 router but returned empty-handed, I followed the instructions here:
http://www.Cisco.com/en/us/products/ps9422/products_configuration_example09186a0080b4ae61.shtml
#1: config PIX:
: Saved
: Written by enable_15 to the 18:05:33.678 EDT Saturday, October 20, 2012
!
8.0 (4) version PIX
!
hostname pix535
!
interface GigabitEthernet0
Description to cable-modem
nameif outside
security-level 0
address IP X.X.138.132 255.255.255.0
OSPF cost 10
!
interface GigabitEthernet1
Description inside 10/16
nameif inside
security-level 100
IP 10.1.1.254 255.255.0.0
OSPF cost 10
!
outside_access_in of access allowed any ip an extended list
access extensive list ip 10.1.0.0 inside_nat0_outbound allow 255.255.0.0 10.20.0.0 255.255.0.0
inside_nat0_outbound list of allowed ip extended access all 10.1.1.192 255.255.255.248
outside_cryptomap_dyn_60 list of allowed ip extended access all 10.1.1.192 255.255.255.248
access extensive list ip 10.1.0.0 outside_1_cryptomap allow 255.255.0.0 10.20.0.0 255.255.0.0
pager lines 24
cnf-8-ip 10.1.1.192 mask - 10.1.1.199 IP local pool 255.255.0.0
Global interface 10 (external)
15 1.2.4.5 (outside) global
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 15 10.1.0.0 255.255.0.0
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 X.X.138.1 1
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA MD5-ESP-3DES ESP-DES-MD5
life together - the association of security crypto dynamic-map outside_dyn_map 20 28800 seconds
Crypto-map dynamic outside_dyn_map 20 kilobytes of life together - the association of safety 4608000
Crypto-map dynamic outside_dyn_map 40 value transform-set ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA
life together - the association of security crypto dynamic-map outside_dyn_map 40 28800 seconds
Crypto-map dynamic outside_dyn_map 40 kilobytes of life together - the association of safety 4608000
Dynamic crypto map outside_dyn_map 60 match address outside_cryptomap_dyn_60
Crypto-map dynamic outside_dyn_map 60 value transform-set ESP-3DES-MD5 ESP-3DES-SHA ESP-DES-MD5 ESP-DES-SHA
life together - the association of security crypto dynamic-map outside_dyn_map 60 28800 seconds
Crypto-map dynamic outside_dyn_map 60 kilobytes of life together - the association of safety 4608000
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-SHA-3DES ESP-MD5-3DES ESP-DES-SHA ESP-DES-MD5
Dynamic crypto map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define security association lifetime 28800 seconds
cryptographic kilobytes 4608000 life of the set - the association of security of the 65535 SYSTEM_DEFAULT_CRYPTO_MAP of the dynamic-map
card crypto outside_map 1 match address outside_1_cryptomap
outside_map game 1 card crypto peer X.X.21.29
card crypto outside_map 1 set of transformation-ESP-DES-SHA
outside_map map 1 lifetime of security association set seconds 28800 crypto
card crypto outside_map 1 set security-association life kilobytes 4608000
outside_map card crypto 65534 isakmp ipsec dynamic SYSTEM_DEFAULT_CRYPTO_MAP
map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map
outside_map interface card crypto outside
ISAKMP crypto identity hostname
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
the Encryption
sha hash
Group 1
life 86400
crypto ISAKMP policy 20
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Crypto isakmp nat-traversal 3600
internal GroupPolicy1 group strategy
cnf-vpn-cls group policy internal
attributes of cnf-vpn-cls-group policy
value of 10.1.1.7 WINS server
value of 10.1.1.7 DNS server 10.1.1.205
Protocol-tunnel-VPN IPSec l2tp ipsec
field default value x.com
sean U/h5bFVjXlIDx8BtqPFrQw password user name is nt encrypted
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared-key secret1
RADIUS-sdi-xauth
tunnel-group DefaultRAGroup ppp-attributes
ms-chap-v2 authentication
tunnel-group cnf-vpn-cls type remote access
tunnel-group global cnf-vpn-cls-attributes
cnf-8-ip address pool
Group Policy - by default-cnf-vpn-cls
tunnel-group cnf-CC-vpn-ipsec-attributes
pre-shared-key secret2
ISAKMP ikev1-user authentication no
tunnel-group cnf-vpn-cls ppp-attributes
ms-chap-v2 authentication
tunnel-group X.X.21.29 type ipsec-l2l
IPSec-attributes tunnel-Group X.X.21.29
Pre-shared key SECRET
!
class-map inspection_default
match default-inspection-traffic
!
!
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum:9780edb09bc7debe147db1e7d52ec39c
: end
#2: 2811 router config:
!
! Last configuration change to 09:15:32 PST Friday, October 19, 2012 by cnfla
! NVRAM config update at 13:45:03 PST Tuesday, October 16, 2012
!
version 12.4
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
hostname THE-2800
!
!
Crypto pki trustpoint TP-self-signed-1411740556
enrollment selfsigned
name of the object cn = IOS - Self - signed - certificate - 1411740556
revocation checking no
rsakeypair TP-self-signed-1411740556
!
!
TP-self-signed-1411740556 crypto pki certificate chain
certificate self-signed 01
308201A 8 A0030201 02020101 3082023F 300 D 0609 2A 864886 F70D0101 04050030
2 060355 04031326 494F532D 53656 C 66 2 AND 536967 6E65642D 43657274 31312F30
69666963 31343131 37343035 6174652D 3536301E 170 3132 31303136 32303435
30335A 17 0D 323030 31303130 30303030 305A 3031 06035504 03132649 312F302D
4F532D53 5369676E 656C662D 43 65727469 66696361 74652 31 34313137 65642D
34303535 3630819F 300 D 0609 2A 864886 01050003, 818, 0030, 81890281 F70D0101
8100F75F F1BDAD9B DE9381FD 7EAF9685 CF15A317 165B 5188 1 B 424825 9C66AA28
C990B2D3 D69A2F0F D745DB0E 2BB4995D 73415AC4 F01B2019 C4BCF9E0 84373199
E599B86C 17DBDCE6 47EBE0E3 8DBC90B2 9B4E217A 87F04BF7 A182501E 24381019
A61D2C05 5404DE88 DA2A1ADC A81B7F65 C318B697 7ED69DF1 2769E4C8 F3449B33
010001A 3 67306530 1 130101 FF040530 030101FF 30120603 0F060355 35AF0203
1104 B 0 300982 074C412D 32383030 551D 551 2304 18301680 14B56EEB 301F0603
88054CCA BB8CF8E8 F44BFE2C B77954E1 52301 D 06 04160414 B56EEB88 03551D0E
054CCABB 8CF8E8F4 4BFE2CB7 7954E152 300 D 0609 2A 864886 F70D0101 04050003
81810056 58755 56 331294F8 BEC4FEBC 54879FF5 0FCC73D4 B964BA7A 07D 20452
E7F40F42 8B 355015 77156C9F AAA45F9F 59CDD27F 89FE7560 F08D953B FC19FD2D
310DA96E A5F3E83B 52D515F8 7B4C99CF 4CECC3F7 1A0D4909 BD08C373 50BB53CC
659 4246 2CB7B79F 43D94D96 586F9103 9B4659B6 5C8DDE4F 7CC5FC68 C4AD197A 4EC322 C
quit smoking
!
!
!
crypto ISAKMP policy 1
preshared authentication
ISAKMP crypto key address SECRET X.X.138.132 No.-xauth
!
!
Crypto ipsec transform-set the-2800-trans-set esp - esp-sha-hmac
!
map 1 la-2800-ipsec policy ipsec-isakmp crypto
ipsec vpn Description policy
defined by peer X.X.138.132
the transform-set the-2800-trans-set value
match address 101
!
!
!
!
!
!
interface FastEthernet0/0
Description WAN side
address IP X.X.216.29 255.255.255.248
NAT outside IP
IP virtual-reassembly
automatic duplex
automatic speed
No cdp enable
No mop enabled
card crypto 2800-ipsec-policy
!
interface FastEthernet0/1
Description side LAN
IP 10.20.1.1 255.255.255.0
IP nat inside
IP virtual-reassembly
full duplex
automatic speed
No mop enabled
!
IP nat inside source map route sheep interface FastEthernet0/0 overload
access-list 10 permit X.X.138.132
access-list 99 allow 64.236.96.53
access-list 99 allow 98.82.1.202
access list 101 remark vpn tunnerl acl
Note access-list 101 category SDM_ACL = 4
policy of access list 101 remark tunnel
access-list 101 permit ip 10.20.0.0 0.0.0.255 10.1.0.0 0.0.255.255
access-list 110 deny ip 10.20.0.0 0.0.0.255 10.1.0.0 0.0.255.255
access-list 110 permit ip 10.20.0.0 0.0.0.255 any
public RO SNMP-server community
!
!
!
sheep allowed 10 route map
corresponds to the IP 110
!
!
!
!
WebVPN gateway gateway_1
IP address X.X.216.29 port 443
SSL trustpoint TP-self-signed-1411740556
development
!
WebVPN install svc flash:/webvpn/svc.pkg
!
WebVPN gateway-1 context
title 'b '.
secondary-color white
color of the title #CCCC66
text-color black
SSL authentication check all
!
!
policy_1 political group
functions compatible svc
SVC-pool of addresses "WebVPN-Pool."
SVC Dungeon-client-installed
SVC split include 10.20.0.0 255.255.0.0
Group Policy - by default-policy_1
Gateway gateway_1
development
!
!
end
#3: test Pix to the router:
ITS enabled: 1
Generate a new key SA: 0 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)
Total SA IKE: 1
1 peer IKE: X.X.21.29
Type: user role: initiator
Generate a new key: no State: MM_WAIT_MSG2
> DEBUG:
12:07:14 pix535:Oct 22 Oct 22 12:20:28 EDT: % PIX-vpn-3-713902: IP = X.X.21.29, Removing peer to peer table has not, no match22 Oct 12:07:14 pix535: 22 Oct 12:20:28 EDT: % PIX-vpn-4-713903: IP = X.X.21.29, error: cannot delete PeerTblEntry#4: test the router to pix:LA - 2800 #sh crypto isakmp hisIPv4 Crypto ISAKMP Security Associationstatus of DST CBC State conn-id slotX.X.138.132 X.X.216.29 MM_KEY_EXCH 1017 ASSETS 0> debugLA - 2800 #ping 10.1.1.7 source 10.20.1.1Type to abort escape sequence.Send 5, echoes ICMP 100 bytes to 10.1.1.7, time-out is 2 seconds:Packet sent with a source address of 10.20.1.1Oct 22 16:24:33.945: ISAKMP: (0): profile of THE request is (NULL)22 Oct 16:24:33.945: ISAKMP: created a struct peer X.X.138.132, peer port 50022 Oct 16:24:33.945: ISAKMP: new created position = 0x488B25C8 peer_handle = 0 x 8000001322 Oct 16:24:33.945: ISAKMP: lock struct 0x488B25C8, refcount 1 to peer isakmp_initiator22 Oct 16:24:33.945: ISAKMP: 500 local port, remote port 50022 Oct 16:24:33.945: ISAKMP: set new node 0 to QM_IDLE22 Oct 16:24:33.945: ISAKMP: find a dup her to the tree during the isadb_insert his 487720 A 0 = call BVA22 Oct 16:24:33.945: ISAKMP: (0): cannot start aggressive mode, try the main mode.22 Oct 16:24:33.945: ISAKMP: (0): pair found pre-shared key matching 70.169.138.132Oct 22 16:24:33.945: ISAKMP: (0): built of NAT - T of the seller-rfc3947 IDOct 22 16:24:33.945: ISAKMP: (0): built the seller-07 ID NAT - tOct 22 16:24:33.945: ISAKMP: (0): built of NAT - T of the seller-03 IDOct 22 16:24:33.945: ISAKMP: (0): built the seller-02 ID NAT - t22 Oct 16:24:33.945: ISAKMP: (0): entry = IKE_MESG_FROM_IPSEC, IKE_SA_REQ_MM22 Oct 16:24:33.945: ISAKMP: (0): former State = new State IKE_READY = IKE_I_MM1Oct 22 16:24:33.945: ISAKMP: (0): Beginner Main Mode ExchangeOct 22 16:24:33.945: ISAKMP: (0): package X.X.138.132 my_port 500 peer_port 500 (I) sending MM_NO_STATE22 Oct 16:24:33.945: ISAKMP: (0): sending a packet IPv4 IKE.22 Oct 16:24:34.049: ISAKMP (0:0): packet received dport 500 sport Global 500 (I) MM_NO_STATE X.X.138.13222 Oct 16:24:34.049: ISAKMP: (0): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH22 Oct 16:24:34.049: ISAKMP: (0): former State = new State IKE_I_MM1 = IKE_I_MM2Oct 22 16:24:34.049: ISAKMP: (0): treatment ITS payload. Message ID = 0Oct 22 16:24:34.049: ISAKMP: (0): load useful vendor id of treatmentOct 22 16:24:34.049: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 123Oct 22 16:24:34.049: ISAKMP: (0): provider ID is NAT - T v2Oct 22 16:24:34.049: ISAKMP: (0): load useful vendor id of treatmentOct 22 16:24:34.049: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 19422 Oct 16:24:34.053: ISAKMP: (0): pair found pre-shared key matching 70.169.138.132Oct 22 16:24:34.053: ISAKMP: (0): pre-shared key local found22 Oct 16:24:34.053: ISAKMP: analysis of the profiles for xauth...22 Oct 16:24:34.053: ISAKMP: (0): audit ISAKMP transform 1 against the policy of priority 122 Oct 16:24:34.053: ISAKMP: DES-CBC encryption22 Oct 16:24:34.053: ISAKMP: SHA hash22 Oct 16:24:34.053: ISAKMP: default group 122 Oct 16:24:34.053: ISAKMP: pre-shared key auth22 Oct 16:24:34.053: ISAKMP: type of life in seconds22 Oct 16:24:34.053: ISAKMP: life (IPV) 0 x 0 0 x 1 0 x 51 0x8022 Oct 16:24:34.053: ISAKMP: (0): atts are acceptable22 Oct 16:24:34.053: ISAKMP: (0): Acceptable atts: real life: 022 Oct 16:24:34.053: ISAKMP: (0): Acceptable atts:life: 022 Oct 16:24:34.053: ISAKMP: (0): fill atts in his vpi_length:422 Oct 16:24:34.053: ISAKMP: (0): fill atts in his life_in_seconds:8640022 Oct 16:24:34.053: ISAKMP: (0): return real life: 8640022 Oct 16:24:34.053: ISAKMP: (0): timer life Started: 86400.Oct 22 16:24:34.053: ISAKMP: (0): load useful vendor id of treatmentOct 22 16:24:34.053: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 123Oct 22 16:24:34.053: ISAKMP: (0): provider ID is NAT - T v2Oct 22 16:24:34.053: ISAKMP: (0): load useful vendor id of treatmentOct 22 16:24:34.053: ISAKMP: (0): provider ID seems the unit/DPD but major incompatibility of 19422 Oct 16:24:34.053: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE22 Oct 16:24:34.053: ISAKMP: (0): former State = new State IKE_I_MM2 = IKE_I_MM2Oct 22 16:24:34.057: ISAKMP: (0): package X.X.138.132 my_port 500 peer_port 500 (I) sending MM_SA_SETUP22 Oct 16:24:34.057: ISAKMP: (0): sending a packet IPv4 IKE.22 Oct 16:24:34.057: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE22 Oct 16:24:34.057: ISAKMP: (0): former State = new State IKE_I_MM2 = IKE_I_MM322 Oct 16:24:34.181: ISAKMP (0:0): packet received dport 500 sport Global 500 (I) MM_SA_SETUP X.X.138.13222 Oct 16:24:34.181: ISAKMP: (0): entry = IKE_MESG_FROM_PEER, IKE_MM_EXCH22 Oct 16:24:34.181: ISAKMP: (0): former State = new State IKE_I_MM3 = IKE_I_MM4Oct 22 16:24:34.181: ISAKMP: (0): processing KE payload. Message ID = 0Oct 22 16:24:34.217: ISAKMP: (0): processing NONCE payload. Message ID = 022 Oct 16:24:34.217: ISAKMP: (0): pre-shared key found peer corresponding to X.X.138.132Oct 22 16:24:34.217: ISAKMP: (1018): load useful vendor id of treatmentOct 22 16:24:34.217: ISAKMP: (1018): provider ID is the unitOct 22 16:24:34.217: ISAKMP: (1018): load useful vendor id of treatmentOct 22 16:24:34.217: ISAKMP: (1018): provider ID seems the unit/DPD but major incompatibility of 55Oct 22 16:24:34.217: ISAKMP: (1018): provider ID is XAUTHOct 22 16:24:34.217: ISAKMP: (1018): load useful vendor id of treatmentOct 22 16:24:34.217: ISAKMP: (1018): addressing another box of IOS!Oct 22 16:24:34.221: ISAKMP: (1018): load useful vendor id of treatment22 Oct 16:24:34.221: ISAKMP: (1018): vendor ID seems the unit/DPD but hash mismatch22 Oct 16:24:34.221: ISAKMP: receives the payload type 2022 Oct 16:24:34.221: ISAKMP: receives the payload type 2022 Oct 16:24:34.221: ISAKMP: (1018): entry = IKE_MESG_INTERNAL, IKE_PROCESS_MAIN_MODE22 Oct 16:24:34.221: ISAKMP: (1018): former State = new State IKE_I_MM4 = IKE_I_MM422 Oct 16:24:34.221: ISAKMP: (1018): send initial contact22 Oct 16:24:34.221: ISAKMP: (1018): ITS been pre-shared key, using id ID_IPV4_ADDR type authentication22 Oct 16:24:34.221: ISAKMP (0:1018): payload IDnext payload: 8type: 1address: X.X.216.29Protocol: 17Port: 500Length: 1222 Oct 16:24:34.221: ISAKMP: (1018): the total payload length: 12Oct 22 16:24:34.221: ISAKMP: (1018): package X.X.138.132 my_port 500 peer_port 500 (I) sending MM_KEY_EXCH22 Oct 16:24:34.221: ISAKMP: (1018): sending a packet IPv4 IKE.22 Oct 16:24:34.225: ISAKMP: (1018): entry = IKE_MESG_INTERNAL, IKE_PROCESS_COMPLETE22 Oct 16:24:34.225: ISAKMP: (1018): former State = new State IKE_I_MM4 = IKE_I_MM5...22 Oct 16:24:38.849: ISAKMP: (1017): purge the node 19855474022 Oct 16:24:38.849: ISAKMP: (1017): purge the node 81238000222 Oct 16:24:38.849: ISAKMP: (1017): purge node 773209335...Success rate is 0% (0/5)# THE-2800Oct 22 16:24:44.221: ISAKMP: (1018): transmit phase 1 MM_KEY_EXCH...22 Oct 16:24:44.221: ISAKMP (0:1018): increment the count of errors on his, try 1 5: retransmit the phase 1Oct 22 16:24:44.221: ISAKMP: (1018): transmit phase 1 MM_KEY_EXCHOct 22 16:24:44.221: ISAKMP: (1018): package X.X.138.132 my_port 500 peer_port 500 (I) sending MM_KEY_EXCH22 Oct 16:24:44.221: ISAKMP: (1018): sending a packet IPv4 IKE.22 Oct 16:24:44.317: ISAKMP (0:1018): packet received dport 500 sport Global 500 (I) MM_KEY_EXCH X.X.138.132Oct 22 16:24:44.317: ISAKMP: (1018): package of phase 1 is a duplicate of a previous package.Oct 22 16:24:44.321: ISAKMP: (1018): retransmission jumped to the stage 1 (time elapsed since the last transmission 96)22 Oct 16:24:48.849: ISAKMP: (1017): serving SA., his is 469BAD60, delme is 469BAD6022 Oct 16:24:52.313: ISAKMP (0:1018): packet received dport 500 sport Global 500 (I) MM_KEY_EXCH X.X.138.132Oct 22 16:24:52.313: ISAKMP: (1018): package of phase 1 is a duplicate of a previous package.Oct 22 16:24:52.313: ISAKMP: (1018): retransmission due to phase 1 of retransmissionOct 22 16:24:52.813: ISAKMP: (1018): transmit phase 1 MM_KEY_EXCH...22 Oct 16:24:52.813: ISAKMP (0:1018): increment the count of errors on his, try 2 of 5: retransmit the phase 1Oct 22 16:24:52.813: ISAKMP: (1018): transmit phase 1 MM_KEY_EXCHOct 22 16:24:52.813: ISAKMP: (1018): package X.X138.132 my_port 500 peer_port 500 (I) sending MM_KEY_EXCH22 Oct 16:24:52.813: ISAKMP: (1018): sending a packet IPv4 IKE.Oct 22 16:24:52.913: ISAKMP: (1018): package of phase 1 is a duplicate of a previous package.Oct 22 16:24:52.913: ISAKMP: (1018): retransmission jumped to the stage 1 (time elapsed since the last transmission of 100)22 Oct 16:25:00.905: ISAKMP (0:1018): packet received dport 500 sport Global 500 (I) MM_KEY_EXCH X.X.138.13222 Oct 16:25:00.905: ISAKMP: node set 422447177 to QM_IDLE....22 Oct 16:25:03.941: ISAKMP: (1018): SA is still budding. New application of ipsec in the annex22 Oct 16:25:03.941: ISAKMP: error during the processing of HIS application: failed to initialize SA22 Oct 16:25:03.941: ISAKMP: error while processing message KMI 0, error 2.Oct 22 16:25:12.814: ISAKMP: (1018): transmit phase 1 MM_KEY_EXCH...22 Oct 16:25:12.814: ISAKMP (0:1018): increment the count of errors on his, try 4 out 5: retransmit the phase 1Oct 22 16:25:12.814: ISAKMP: (1018): transmit phase 1 MM_KEY_EXCHOct 22 16:25:12.814: ISAKMP: (1018): package X.X.138.132 my_port 500 peer_port 500 (I) sending MM_KEY_EXCH22 Oct 16:25:12.814: ISAKMP: (1018): sending a packet IPv4 IKE.Oct 22 16:25:22.814: ISAKMP: (1018): transmit phase 1 MM_KEY_EXCH...22 Oct 16:25:22.814: ISAKMP (0:1018): increment the count of errors on his, try 5 of 5: retransmit the phase 1Oct 22 16:25:22.814: ISAKMP: (1018): transmit phase 1 MM_KEY_EXCHOct 22 16:25:22.814: ISAKMP: (1018): package X.X.138.132 my_port 500 peer_port 500 (I) sending MM_KEY_EXCH22 Oct 16:25:22.814: ISAKMP: (1018): sending a packet IPv4 IKE.Oct 22 16:25:32.814: ISAKMP: (1018): transmit phase 1 MM_KEY_EXCH...22 Oct 16:25:32.814: ISAKMP: (1018): peer does not paranoid KeepAlive.......22 Oct 16:25:32.814: ISAKMP: (1018): removal of reason ITS status of 'Death by retransmission P1' (I) MM_KEY_EXCH (post 70.169.138.132)
22 Oct 16:25:32.814: ISAKMP: (1018): removal of reason ITS status of 'Death by retransmission P1' (I) MM_KEY_EXCH (post 70.169.138.132)
22 Oct 16:25:32.814: ISAKMP: Unlocking counterpart struct 0x488B25C8 for isadb_mark_sa_deleted(), count 0
22 Oct 16:25:32.814: ISAKMP: delete peer node by peer_reap for X.X.138.132: 488B25C8
22 Oct 16:25:32.814: ISAKMP: (1018): error suppression node 1112432180 FALSE reason 'IKE deleted.
22 Oct 16:25:32.814: ISAKMP: (1018): error suppression node 422447177 FALSE reason 'IKE deleted.
22 Oct 16:25:32.814: ISAKMP: (1018): node-278980615 error suppression FALSE reason 'IKE deleted.
22 Oct 16:25:32.814: ISAKMP: (1018): entry = IKE_MESG_INTERNAL, IKE_PHASE1_DEL
22 Oct 16:25:32.814: ISAKMP: (1018): former State = new State IKE_I_MM5 = IKE_DEST_SA
22 Oct 16:26:22.816: ISAKMP: (1018): purge the node 1112432180
22 Oct 16:26:22.816: ISAKMP: (1018): purge the node 422447177
22 Oct 16:26:22.816: ISAKMP: (1018): purge the node-278980615
22 Oct 16:26:32.816: ISAKMP: (1018): serving SA., its A 487720, 0 =, delme = A 487720, 0
The PIX is also used VPN client, such as the VPN Cicso 5.0 client access, works very well. Router is used as a server SSL VPN, too much work
I know there are a lot of data here, I hope that these data may be useful for diagnostic purposes.
All suggestions and tips are greatly appreciated.
Sean
Recommended action:
On the PIX:
no card crypto outside_map 1
!
crypto ISAKMP policy 5
preshared authentication
3des encryption
sha hash
Group 2
life 86400
!
card crypto outside_map 10 correspondence address outside_1_cryptomap
crypto outside_map 10 peer X.X.216.29 card game
outside_map crypto 10 card value transform-set ESP-3DES-SHA
life safety association set card crypto outside_map 10 28800 seconds
card crypto outside_map 10 set security-association life kilobytes 4608000
!
tunnel-group X.X.216.29 type ipsec-l2l
IPSec-attributes tunnel-Group X.X.216.29
Pre-shared key SECRET
!
On the router:
crypto ISAKMP policy 10
preshared authentication
Group 2
3des encryption
!
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
output
!
card 10 la-2800-ipsec policy ipsec-isakmp crypto
ipsec vpn Description policy
defined by peer X.X.138.132
game of transformation-ESP-3DES-SHA
match address 101
!
No crypto card-2800-ipsec-policy 1
Let me know how it goes.
Portu.
Please note all useful posts
Post edited by: Javier Portuguez
-
VPN between ASA and cisco router [phase2 question]
Hi all
I have a problem with IPSEC VPN between ASA and cisco router
I think that there is a problem in the phase 2
Can you please guide me where could be the problem.
I suspect questions ACL on the router, but I cannot fix. ACL on the router is specified belowLooking forward for your help
Phase 1 is like that
Cisco_router #sh crypto isakmp his
IPv4 Crypto ISAKMP Security Association
status of DST CBC State conn-id slot
78.x.x.41 87.x.x.4 QM_IDLE 2006 0 ACTIVEand ASA
ASA # sh crypto isakmp his
ITS enabled: 1
Generate a new key SA: 0 (a tunnel report Active 1 and 1 to generate a new key during the generate a new key)
Total SA IKE: 11 peer IKE: 78.x.x.41
Type: L2L role: initiator
Generate a new key: no State: MM_ACTIVEPhase 2 on SAA
ASA # sh crypto ipsec his
Interface: Outside
Tag crypto map: Outside_map, seq num: 20, local addr: 87.x.x.4Outside_cryptomap_20 ip 172.19.209.0 access list allow 255.255.255.0 172.
19.194.0 255.255.255.0
local ident (addr, mask, prot, port): (172.19.209.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (172.19.194.0/255.255.255.0/0/0)
current_peer: 78.x.x.41#pkts program: 8813, #pkts encrypt: 8813, #pkts digest: 8813
#pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 8813, model of #pkts failed: 0, #pkts Dang failed: 0
#send errors: 0, #recv errors: 0local crypto endpt. : 87.x.x.4, remote Start crypto. : 78.x.x.41
Path mtu 1500, fresh ipsec generals 58, media, mtu 1500
current outbound SPI: C96393ABSAS of the esp on arrival:
SPI: 0x3E9D820B (1050509835)
transform: esp-3des esp-md5-hmac no
running parameters = {L2L, Tunnel}
slot: 0, id_conn: 7, crypto-card: Outside_map
calendar of his: service life remaining (KB/s) key: (4275000/3025)
Size IV: 8 bytes
support for replay detection: Y
outgoing esp sas:
SPI: 0xC96393AB (3378746283)
transform: esp-3des esp-md5-hmac no
running parameters = {L2L, Tunnel}
slot: 0, id_conn: 7, crypto-card: Outside_map
calendar of his: service life remaining (KB/s) key: (4274994/3023)
Size IV: 8 bytes
support for replay detection: YPhase 2 on cisco router
protégé of the vrf: (none)
local ident (addr, mask, prot, port): (172.19.209.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (172.19.194.0/255.255.255.0/0/0)
current_peer 87.x.x.4 port 500
LICENCE, flags is {origin_is_acl},
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors #send 0, #recv 0 errorslocal crypto endpt. : 78.x.x.41, remote Start crypto. : 87.x.x.4
Path mtu 1452, ip mtu 1452, ip mtu BID Dialer0
current outbound SPI: 0x0 (0)SAS of the esp on arrival:
the arrival ah sas:
SAS of the CFP on arrival:
outgoing esp sas:
outgoing ah sas:
outgoing CFP sas:
protégé of the vrf: (none)
local ident (addr, mask, prot, port): (172.19.194.0/255.255.255.0/0/0)
Remote ident (addr, mask, prot, port): (172.19.209.0/255.255.255.0/0/0)
current_peer 87.x.x.4 port 500
LICENCE, flags is {origin_is_acl},
#pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
#pkts decaps: 8947, #pkts decrypt: 8947, #pkts check: 8947
compressed #pkts: 0, unzipped #pkts: 0
#pkts uncompressed: 0, #pkts compr. has failed: 0
#pkts not unpacked: 0, #pkts decompress failed: 0
Errors #send 0, #recv 0 errorslocal crypto endpt. : 78.x.x.41, remote Start crypto. : 87.x.x.4
Path mtu 1452, ip mtu 1452, ip mtu BID Dialer0
current outbound SPI: 0x3E9D820B (1050509835)SAS of the esp on arrival:
SPI: 0xC96393AB (3378746283)
transform: esp-3des esp-md5-hmac.
running parameters = {Tunnel}
Conn ID: 29, flow_id: Motorola SEC 1.0:29, card crypto: mycryptomap
calendar of his: service life remaining (k/s) key: (4393981/1196)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVEthe arrival ah sas:
SAS of the CFP on arrival:
outgoing esp sas:
SPI: 0x3E9D820B (1050509835)
transform: esp-3des esp-md5-hmac.
running parameters = {Tunnel}
Conn ID: 30, flow_id: Motorola SEC 1.0:30, card crypto: mycryptomap
calendar of his: service life remaining (k/s) key: (4394007/1196)
Size IV: 8 bytes
support for replay detection: Y
Status: ACTIVEoutgoing ah sas:
outgoing CFP sas:
VPN configuration is less in cisco router
access-list 101 permit ip 172.19.194.0 0.0.0.255 172.19.206.0 0.0.0.255 connect
access-list 101 permit ip 172.19.206.0 0.0.0.255 172.19.194.0 0.0.0.255 connect
access-list 101 permit ip 172.19.194.0 0.0.0.255 172.19.203.0 0.0.0.255 connect
access-list 101 permit ip 172.19.203.0 0.0.0.255 172.19.194.0 0.0.0.255 connect
access-list 101 permit ip 172.19.194.0 0.0.0.255 172.19.209.0 0.0.0.255 connect
access-list 101 permit ip 172.19.209.0 0.0.0.255 172.19.194.0 0.0.0.255 connectaccess-list 105 deny ip 172.19.194.0 0.0.0.255 172.19.206.0 0.0.0.255 connect
access-list 105 deny ip 172.19.206.0 0.0.0.255 172.19.194.0 0.0.0.255 connect
access-list 105 deny ip 172.19.194.0 0.0.0.255 172.19.203.0 0.0.0.255 connect
access-list 105 deny ip 172.19.203.0 0.0.0.255 172.19.194.0 0.0.0.255 connect
access-list 105 deny ip 172.19.194.0 0.0.0.255 172.19.209.0 0.0.0.255 connect
access-list 105 deny ip 172.19.209.0 0.0.0.255 172.19.194.0 0.0.0.255 connectsheep allowed 10 route map
corresponds to the IP 105Crypto ipsec transform-set esp-3des esp-md5-hmac mytransformset
mycryptomap 100 ipsec-isakmp crypto map
the value of 87.x.x.4 peer
Set transform-set mytransformset
match address 101crypto ISAKMP policy 100
BA 3des
md5 hash
preshared authentication
Group 2
ISAKMP crypto key xxx2011 address 87.x.x.4Your permit for 105 ACL statement should be down is changed to match because it is the most general ACL.
You currently have:
Extend the 105 IP access list
5 permit ip 172.19.194.0 0.0.0.255 (18585 matches)
10 deny ip 172.19.194.0 0.0.0.255 172.19.206.0 0.0.0.255 connect
30 deny ip 172.19.194.0 0.0.0.255 172.19.203.0 0.0.0.255 connect
50 deny ip 172.19.194.0 0.0.0.255 172.19.209.0 0.0.0.255 connectIt should be:
Extend the 105 IP access list
10 deny ip 172.19.194.0 0.0.0.255 172.19.206.0 0.0.0.255 connect
30 deny ip 172.19.194.0 0.0.0.255 172.19.203.0 0.0.0.255 connect
50 deny ip 172.19.194.0 0.0.0.255 172.19.209.0 0.0.0.255 connectIP 172.19.194.0 allow 60 0.0.0.255 (18585 matches)
To remove it and add it to the bottom:
105 extended IP access list
not 5
IP 172.19.194.0 allow 60 0.0.0.255 any
Then ' delete ip nat trans. "
and it should work now.
-
Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!
Check your hosts file.
help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-
Where post/send the complaints directly to Apple? Since the "adjustment" on El Capitan, helping in Mail and Photos is terrible!
You can send your comments directly to Apple > http://www.apple.com/feedback/
-
Uh oh, I've changed the url to "subject: config" to establish the new tab in Mozilla always goodnewsnetwork. Who wanted to do as I like to click on a tab and have my most used sites in tiles.
How can I get that back? What is the url for this? And I'll put it back.Thank you very much!
Morgane
You can change the pref browser.newtab.url on the on: config page and reset the default value pref: newtab or set a different page as the subject: blank page.
See also this article on the page tab (topic: newtab):
-
Please help me open and convert img photos received in jpg format. In addition, video came in a text to MOV and was perfectly fine on the phone to shippers. "Would not send" on mine.
How files are received, it is up to what type of file the sender offers you, not to your receiving device. This would apply to both photos and videos. An img file, perhaps only the name of the file itself, which is part of the phone to file naming convention. Image and video converters can be found online. There are many of them.
-
Cannot install itunes for windows - error: Apple Application Support is required to run Itunes Helper. Uninstall and reinstall (as I did twice)
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.
Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.
TT2
-
Need help to download and use MovieMaker
Need help to download and use MovieMaker. I have XP Home Edition Version 2002 SP 3. Could not locate moviemaker. Read somewhere that it was in SP2. How can I go about it? Since it puts I have SP3, I have to add SP2 or how do I go about this? THX
Hi Boolaboola,
MovieMaker is a separate program and is not installed in the service pack. Here is a link to download the latest version (Windows Live Movie Maker), more tutorials, articles, and much additional information on Windows Movie Maker:
Movie Maker:
Windows Live Movie Maker download:
http://download.live.com/MovieMaker?WA=wsignin1.0
Getting started with Windows Movie Maker
http://Windows.Microsoft.com/en-us/Windows-Vista/getting-started-with-Windows-Movie-Maker
Articles and tutorials for Windows Movie Maker
http://www.windowsmoviemakers.NET/tutorials/
How to-tutorials - Movie Maker
http://www.myvideoproblems.com/tutorials/MovieMaker/TutorialsMovieMaker.htm
Hope this helps,
Steve <> Microsoft Partner
Maybe you are looking for
-
I use a Windows 8.1 operating system. Not the RT version or a new version; just the standard version of Windows 8.1. I have a soft for Mozilla Firefox on my splash screen, and a PIN in my taskbar. I deleted the Firefox shortcut from the desktop and d
-
When opening new page, an additional window says "problem loading page".
Opening the causes of Firefox open a second tab down to make it appear that reads "problem loading page"... the pages I want to see on all sites, well, I just get an annoying extra tab with this message... If I click on this tab, a small window appea
-
Is it possible on the backflip to have the screen light up when I get a new text message. I know it sounds stupid, but when I get a new text message I want the screen to light upward, so I can get a preview of the message and that her leave without h
-
How to use the /b switch to force patches to install?
I had the problem that is described in the 980333 hotfix (i.e. the right margin of only the first page gets cut off when printing html email in Outlook 2003 with IE8 installed) but this hotfix will not install on a XP system. I have found a solution
-
my brother has vista and there hava xp__
How can I get remote conection how I see my brother sreen on my desk to do some repairs tanck - you claude