Help derivatives (probably my ignorance)

Similar Questions

• Help derived formula

  Hi team,

  I need assistance with forms (2).

  My first ask is the following:

  I have two hierarchies with some of the same members each according to level (I inserted the).

  I need the formula run all Member in 1 prefix with CCV hierarchy, then go to 2 of hierarchy and return his grandparents pillar value (Core.Abbrev).

  I already called formula Custom.GrandParent Just need help to navigate.

  My second ask is the following:

  Concate (propvalue (Core.ABBREV) with the propvalue (Custom.AccountName) of the CHILD if the child begins by AAA, if this is not the case, down 1 level more and use this value (Custom.AccountName).

  Don't know how to go down a level (or 2).

  Thank you!

  Hello

  For your first case create a property derived with this formula:

  If)

  And)

  Equals (String, SUBSTRING (ABBREV (), 1, 3), CCV),

  Equals (String, PropValue (Core.HierName),Hierarchy1)

  ),

  HierNodePropValue (Hierarchy2, Abbrev(),Custom.GrandParent),

  )

  Assuming that your grandparent property is a property derived local containing the formula-

  ParentPropValue (Core.Parent)

  
  

  
  

  Second case-

  
  

  NodePropValue (ListRelatedNodesWith (Descendants, Equals (String, SubString (PropValue (Core.Abbrev), 1, 3), AAA), yesterday, 1), Custom.AccountName)

  Let know if thid worked for you

  THANKS & Cheers

  Denzz

• SQL Help: Derive from 'News' columns based on condition

  Hi all
  
  Can someone help me with this please? I am trying to achieve in a SQL (no), if this can be done in two different stages, even that is fine too...
  
  Thanks in advance,
  Chavigny
  

  SELECT * FROM
  (
  SELECT 2765 BTCH_ID,'payroll' BTCH_NM,'payroll~EUR~EUR~DE'NEW_BTCH_NM,'1234'TMPLT_ID FROM DUAL
  UNION
  SELECT 2765,'payroll','payroll~USD~USD~US','1235' FROM DUAL
  UNION
  SELECT 2765,'payroll','payroll~USD~USD~US','1236' FROM DUAL
  UNION
  SELECT 2765,'payroll','payroll~GBP~GBP~GB','1237' FROM DUAL
  UNION
  SELECT 2766,'SALARY','SALARY~USD~USD~US','1238' FROM DUAL
  UNION
  SELECT 2766,'SALARY','SALARY~USD~USD~US','1239' FROM DUAL
  ) T_BATCH;

  For a "batch - id", there are several Transactions that are denoted by (cr_crncy_cd, dr_crncy_cd, recvr_cntry_cd), and the "NEW_BTCH_NM" column is basically a concatenation of 'BTCH_NM' + above 3 columns (with a ~)
  
  I'm trying to derive two new columns "SEQ" & "Output_Batch_name".
  
  The SEQ column:
  

  For every batch_id, the first row will be assigned by sequence.nextval.
      For all transactions within BTCH_ID, 
                     all the rows with same NEW_BTCH_NM, share the same sequence number
                      if different, then SEQ.nextval for all distinct rows

  Output_BTCH_NM:
  

     for a given batch_id, 
           if the NEW_BTCH_NM is the same for all transactions ( batch_id 2766 in the below example) ,  
                           then Output_BTCH_NM = BTCH_NM should be marked for All transactions which belong to this Batch_id,
          Else 
              Output_BTCH_NM = New_BTCH_NM
       END if

  EXPECTED RESULTS
  

  *BTCH_ID     BTCH_NM             NEW_BTCH_NM          TMPLT_ID     SEQ         Output_BTCH_NM*
  2765       payroll                payroll~EUR~EUR~DE     1234         1          payroll~EUR~EUR~DE
  2765       payroll                payroll~GBP~GBP~GB     1237         2          payroll~GBP~GBP~GB
  2765       payroll                payroll~USD~USD~US     1235         3          payroll~USD~USD~US
  2765       payroll                payroll~USD~USD~US     1236         3          payroll~USD~USD~US
  
  2766       SALARY                SALARY~USD~USD~US     1238         4          SALARY
  2766       SALARY                SALARY~USD~USD~US     1239         4          SALARY

  Published by: user10711957 on 25 Sep, 2010 16:37

  An extension of the solution of the (slightly modified) jiq

  function my_sequence(whichval in varchar2) return number is
  begin
    if whichval = 'currval' then
      return your_sequence.currval;
    else
      return your_sequence.nextval;
    end if;
  end my_sequence;
  
  WITH t AS
  (
  SELECT 2765 BTCH_ID,'payroll' BTCH_NM,'payroll~EUR~EUR~DE'NEW_BTCH_NM,'1234'TMPLT_ID FROM DUAL
  UNION
  SELECT 2765,'payroll','payroll~USD~USD~US','1235' FROM DUAL
  UNION
  SELECT 2765,'payroll','payroll~USD~USD~US','1236' FROM DUAL
  UNION
  SELECT 2765,'payroll','payroll~GBP~GBP~GB','1237' FROM DUAL
  UNION
  SELECT 2766,'SALARY','SALARY~USD~USD~US','1238' FROM DUAL
  UNION
  SELECT 2766,'SALARY','SALARY~USD~USD~US','1239' FROM DUAL
  )
  select btch_id,btch_nm,new_btch_nm,tmplt_id,
         case when lag(seq,1) over (order by tmplt_id) = seq
              then my_sequence('currval')
              else my_sequence('nextval')
         end seq,
         out_btch_nm
  select btch_id,btch_nm,new_btch_nm,tmplt_id,
         dense_rank() over(partition by btch_id order by new_btch_nm) seq
         case when count(distinct new_btch_nm) over (partition by btch_id) = 1
              then btch_nm
              else new_btch_nm
         end out_btch_nm
    from t
  

  Concerning

  Etbin

  Posted before you see the following

  the sequence # must be continuous, must avoid any shortfall or gaps with the numbering.

  the foregoing must be the only user of its own sequence somehow and maybe...
  Search for "sequence free gap"... http://asktom.oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:4343369880986
  Edited by: Etbin on 26.9.2010 08:21

• Search engine optimization HELP! (probably pretty easy!)

  Hello!

  I'm new to dream and I made this web page for the company of my friends. Now when I type in the name of the company, it comes first, which is good. But in google it does not say the name of the company under the Web site link, it just says: "Index of /" and in the description it says only: "cgi.bin" or something. Ive tried to change this option in the properties of the Page metadata. But this does not seem to do anything. Also, I went to Cpanel and tried to find something from there, without any cause what so ever.

  Web site: www.dlsentertainment.fi

  Any help is greatly appreciated!

  Google has not yet indexed your page updated. Assuming another page on the web links to it, it may take a few days. (If nothing else linked to it, Google may never find.) You can decrease this time and make sure that Google is aware of your site if you submit the sitemap.xml using Google Webmaster Tools. However, it always still usually takes ~ 24 hours for Google to re - index your page.

  If you click on the small triangle on the decline after the URL in the search results, a context menu containing "cache" will appear. If you select that she will show you what the page looked like when Google has indexed it (and tell you when Google last indexed the page).

• Help: Saving as jpg ignores soften the edge / mask

  Hello

  today I updated my CC Photoshop Version: 2015.1.2 20160113. 355 2016/01/13:23:59:59 CL 1059143 x 64 and since then, I have a big problem with the standard "save under"-dialog.

  If I have a layer with a soften the edges, for example, to set a thumbnail of a picture, and save this image with the standard dialog as a jpg the soften edge is lost and there is a hard edge without any sweetness (first image).

  If I record it with the old version 'Save for web' (export) as a jpg file, there is no problem! (second image).

  

  After 5 months, the problem is finally solved in the new version 2015.5...

• Vista will not start. Verifying the integrity of system files and repair has no ErrorCode = 0 x 2 HELP PLEASE!

  ASUS PC, Windows Vist Home premium, all updates.

  Out of the blue, it will not start.  Access the start scrolling (the one just before logon) screen and it just stops.

  Twice I ran Vista check utility.  The first time, I chose to do the system restore to previous state.  Restarted.  Always off.  The second time, it took much longer and from what I can see.  All TESTS PASS, except one:

  Repair action: repair and checking of the filesystem Integrety

  Result: failed. Error code = 0 x 2

  Time required: 6206818ms

  I get no blue screen, I can't even any screen!

  I'm triying to repar because I have several costly software titles that link the authorization key code to a key hardware and software installation.  I don't know that I could reinstall if I get a code (randomly?) different generated software.

  I don't know about i-tunes and other content downloaded my wife has such as MP3 files and audio books.

  Thanks for any help!

  The test fails (SFC) checks for corruption in the files on your system.  If she can't even complete, she suggests the Vista all system needs to be re-installed - but you have already done this and you still have the problem.

  In fact, look like a hardware problem.  Here are some troubleshooting guidelines hardware that can help (but probably not for this question as what you really need, it is a replacement for test):http://elephantboycomputers.com/page2.html#Hardware_Tshoot.  Frankly, I think it's time to take the system to a repair facility of good reputation for the service computer (or to return to the manufacturer for repair - costs, schedule, guarantees and make a decision).  I don't know what hardware component.

  If you can, try to back up your data before you import it it because they will probably wipe the drive clean during the process. You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (perhaps done on another computer).  This should give you enough access to the system (if you do not have any other means) to backup your important data.  Otherwise, try slaving the drive to another system and access the data in this way.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Any plugin filter can use the metadata fields ignored by LR?

  Hello

  Assuming I want to install a filter based on the fields LensID or LensIDNumber, LR cannot help. He simply ignores these fields (and others). Y at - it a plugin which is able to do? I tried AnyFilter but it does not work for these fields.

  Thanks in advance.

  Unfortunately, any filter does not have the ability to filter fields that are not already available (which includes LensID and LensIDNumber).

  However, you can use the Data Explorer plugin for group photos with any visible metadata field to the free utility of Exiftool.

• loud beep sound and warning

  I was on my Macbook Pro, watching some elements to Dillard and Saks Fifth Avenue.   All of a sudden, there was a loud beep and message:

  Dear customer,

  A serious malfunction was detected with OS X 10.11 and

  Firefox 45.0.  Call the toll-free number below to make an Apple MacIntosh technician to help solve the problem.

  877-920-7284.

  For your safety, close the Firefox browser has been disabled without the support of the Apple Macintosh technician to avoid corruption in the registry of your operating system OSX 10.11.

  DO NOT STOP OR RESTART THE COMPUTER, THIS CAN LEAD TO THE LOSS OF DATA AND FAILURE POTENTIAL OF THE SITUATION NOT BOOTABLE, OPERATING SYSTEM, AND POTENTIAL, RESULTING IN A COMPLETE DATA LOSS.  CONTACT MICROSOFT CERTIFIED TECHNICIANS TO SOLVE THE 877-920-7284 TOLL-FREE CALL.

  Is there the validity of this statement.  When I call the number, I just get a message that there is no available agents, call back in a minute, but I've never been able to get to talk to someone...

  Someone is trying to scare you into buying something that won't help and probably really affect your computer if you leave 'help '. Ignore the warning.

  What would Microsoft technicians have anything to do with a Mac?  It is phishing.

  I'm not familiar with the Mac with any record which is a term I hear only with regard to PCs.  There's someone talking gibberish of computer that makes no sense.

• Cannot install Microsoft Office suite service pack 3.

  Original title: upgrades will not be installed

  Hello-

  When even the computer tells me that "upgrades are available" for "suite 2007 microsoft office service pack 3"(j'ai XP/SP3), the machine told me a few seconds later that this upgrade has not been installed. "."  I'm skipping a step?  How can I fix it?  I tried to reinstall several times, but got no results.

  Thanks for all help; I apologize for what is probably obvious ignorance!

  -susie margaret

  Hello, cameron-

  first of all, please ignore everything in my previous post, because a very mysterious thing happened!

  as you know, I fought for seven months with the installation of the 2007 office suite service pack 3 (which had first appeared in the list of the updates that will be available in February, 2012, no problem with downloading, it's with installation only) and tried all the solutions I could find, including ask Qs in several forums and following the suggestions in the responses (except to change things in the registry which I am always too scared to make), and try several times to install the service pack, perform Mr. fixit several times, by installing things, uninstalling, reinstalling things - so many things that I can't even remember that they were all things!  (I always had the "automatic updates" turned on).

  This morning, I started on the suggested solutions enumerated in a link cited in the answer to my question in another forum - http://answers.microsoft.com/en-us/Search/Search?SearchTerm=code+80070663&CurrentScope.ForumName=Windows&CurrentScope.Filter=&askingquestion=false.  I was grimly plowing through them, even redo things, I had tried before, when I was overwhelmed by the whole situation and decided to take a NAP instead.

  When I got up, I decided to re - run, for the zillionth time, looking for updates which may be listed as needing to be installed.  Unlike this every time previous search results - who had grown up only the 2007 office suite service pack 3 - this research brought a new package of security and other updates. I think it was the release of September of corrections, which was not before on account of it being August until yesterday!  and, of course, the 2007 office suite service pack 3 was also among them.

  so I re-directed the operation 'install updates' and - and this is! -2007 office suite service pack 3 installed this time!  I have no idea if this sudden cooperation-

  -because of something I did leave the items in the link that was sent to me, or

  -because I presented the service pack 3 with a bunch of other updates (or updates including), or

  -because (at the suggestion of an answer to my question in another forum), I've changed the 'automatic updates' affecting 'Download, notify me, wait for me to install them,' or

  -What.

  all I know - and care - is that service pack 3 has been installed and I'm so, theoretically at least, current with my updates.

  Thank you again for your willingness to answer my request!

  -susie margaret

• Microsoft Money 2006 delete old live id

  Ive received a warning that I have to remove the old 'Live ID' in my money file or I can lose data.  I never added "Live ID" when it came out a few months back.  I do not have online banking, and not sure if that's what it's referring to.  Don't know what to do and that's all. Any help?

  Whence this "warning"?

  I think that it is a generic warning about the fact that Microsoft has abandoned online services for money from last January.  If you do not have (not) to use the features of online banking, it can probably be ignored.

  This article may (or may not) be a little enlightening: http://support.microsoft.com/kb/2118008
  Note: the 'Money Sunset' applications referenced in the linked article are free: http://www.microsoft.com/download/en/search.aspx?q=money%20sunset

• How can I reinstall the fax on my Dell A10 922 printer function.

  My pc crashed some time ago.  I set myself, but subsequently, the fax feature has disappeared and I can't seem to find a way to reinstall.  Can anyone help?  I am able to scan and to print, but not send fax.

  My pc crashed some time ago.  I set myself, but subsequently, the fax feature has disappeared and I can't seem to find a way to reinstall.  Can anyone help?  I am able to scan and to print, but not send fax.

  Reinstall the Windows Fax Services.  See How to send faxes from a Console of MS Fax using Dell 922

  If you have installed an XP Service Pack (if all goes well, you're up to sp3) since the origin of Windows Installer, stages 6, 7 and 8 will probably be ignored because the installation routine goes and gets the necessary files from C:\Windows\ServicePackFiles.  If you get the files 'necessary' screen mentioned in step 6, use the Browse button to point the installer in C:\Windows\ServicePack files instead of CD player as suggested (the fax have been updated).  If this does not work and the installer complains that specific files cannot be found (for example, fxsapi.dll), files can be compressed in C:\Windows\ServicePackFiles form (search, for example, fxsapi.dl_) and you will have to develop them.

  Also see pages 33 and following in 922 user's Guide .

  Note that the Dell 922 does not seem to have built-in fax ability.  Instead, he sends faxes through a fax modem installed on your computer using Windows Fax Services.  Presumably, you have such modem, because you used to be able to send faxes.

• Windows vista (Home premium) is not shut down or restart

  The computer (with windows vista edition Home premium); NVIDIA Geforce 8400 M GT GPU) is not shut down or restart. I suspect it's due to updates of windows do not. The error code that is more common that I've seen is A 80071, 91, and then other codes of error like 80071A2C. Here are updates of security for vista and internet explorer. Please help on this issue so that the pc starts shutting down as usual.

  Thank you

  "md123456" wrote in message News: 0d2c53df-b4e6-41b0-8773-211803475406...

  Thank you very much. Would be a new instal OS solve these problems?

  If you mean a new facility on a reformatted drive or a system recovery using recovery of the manufacture process, Yes, certainly, unless it's a hardware problem - but then you learn nothing about what caused the problem in the first place and so how do I prevent it from happening again.
  WRT your mistakes: -.
  1. nothing to worry about, as most of the machines do not have parallel ports today (unless yours does?)
  (2) it is difficult to talk about this, without more details-, but because they say "dependants", rather that "unload", it can probably be ignored.
  (3) it seems normal - I've seen a lot of PC with this error, and apparently nothing wrong. -It is important only if you are connected to a domain server
  (4) the service (I think) is a result of system crash, rather than a cause of the grip.
   
  It seems that the cause of this will remain a mystery.
  My earlier concern about SR doesn't work not just because of problems still standing stop - but back your data first, so that if the worst happens and you cannot start the system later, you can go to plan B.
  As Lorien says, try a back system restore to before the problem started - although at 2 months, I would worry about the stability of the system later. Since you already said that you are willing to do a reinstall if necessary, give it a whirl :)
   
  HTH
   
   
   
   
  
  --
   

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC

• With a many to many relationship data in a table - recursive sql?

  Hello
  I'm trying to group data associated with a many to many relationships in a number of unique group using SQL only. The table looks like this.
  
  AMOUNT OF THE CHECK PLAN
  
  1 10
  A 15 2
  2 11 B
  3 12 B
  4 13 B
  4 16 C
  5 17 D
  
  The result should look like this. Since A is linked to 2, 1 and 2 correspond to the B and B are related to 3 and 4, 4 is related to C, these lines should be considered as a group. Any direction on where I should start looking for or if there is no function of Oracle that will be much appreciated. The version of oracle's 10g.
  
  CHECK THE PLAN AMOUNT GROUPID
  
  1-10-1
  2-15-1
  2 11 1 B
  3 12 1 B
  1 13 4 B
  4-16-1 C
  5 17 2 D
  
  
  
  CREATE THE TABLE PAS_DBA. GRPDEL
  (
  CHECKID VARCHAR2 (5 BYTE),
  PLAN OF INTEGER,
  AMOUNT NUMBER (6.2)
  );
  
  TOGETHER TO DEFINE
  Insert into PAS_DBA. GRPDEL
  (CHECKID, PLAN, SUM)
  Values
  ('A', 1, 10);
  Insert into PAS_DBA. GRPDEL
  (CHECKID, PLAN, SUM)
  Values
  ('A', 2, 15);
  Insert into PAS_DBA. GRPDEL
  (CHECKID, PLAN, SUM)
  Values
  ("B", 2, 11);
  Insert into PAS_DBA. GRPDEL
  (CHECKID, PLAN, SUM)
  Values
  ("B", 3, 12);
  Insert into PAS_DBA. GRPDEL
  (CHECKID, PLAN, SUM)
  Values
  ("B", 4, 13);
  Insert into PAS_DBA. GRPDEL
  (CHECKID, PLAN, SUM)
  Values
  ("C", 4, 16);
  Insert into PAS_DBA. GRPDEL
  (CHECKID, PLAN, SUM)
  Values
  (A ', 5, 17);
  COMMIT;

  Hello

  Good thing you're uisng Oracle 10. I don't think you could do this in pure SQL using any earlier version, but the CONNECT BY NOCYCLE feature, introduced in Oracle 10, makes this possible.

  WITH     got_groupname     AS
  (
       SELECT     checkid, plan, amount
       ,     MIN (CONNECT_BY_ROOT checkid)     AS groupname
       FROM     grpdel
       CONNECT BY NOCYCLE     (     checkid     =  PRIOR checkid
                         AND     plan     != PRIOR plan
                      )
                 OR     (     checkid != PRIOR checkid
                      AND     plan     =  PRIOR plan
                      )
       GROUP BY  checkid, plan, amount
  )
  SELECT       g.*
  ,       DENSE_RANK () OVER (ORDER BY groupname)     groupid
  FROM       got_groupname      g
  ORDER BY  checkid
  ,            plan
  ;
  

  Output:

  CHECK PLAN AMOUNT GROUPNAME GROUPID
  ----- ---- ------ --------- -------
  A        1     10 A               1
  A        2     15 A               1
  B        2     11 A               1
  B        3     12 A               1
  B        4     13 A               1
  C        4     16 A               1
  D        5     17 D               2
  

  You did not ask the groupname column, but I realized just to help show how it works. The subquery got_groupname associates each checkid with each other the checkid, regardless how many not deleted the two lines are. MIN finds the lowest checkid that each is bound, which generates a unique group identifier. Personally, I sould like usage of groupname as identifier. It tells you in the blink of an eye that B is a member of the same group has. However, it is not the same as that of a certain number, so if you need a number, you can derive from groupname with the analytical DENSE_RANK function.
  In many versions of Oracle, CONNECT BY queries do not work properly if they contain functions analyric. I don't know if this is the case in your version, but I don't think it's worth taking a chance. By CONNECT BY in a subquery no analytical function and then by the analytical function in a super-requete, we eliminate any chance of such a conflict.

  Thanks for posting the CREATE TABLE and INSERT statements; It is very useful.
  You want to be more useful? Do not publish the name of schema, PAS_DBA. Not many people who want to help you have a schema called PAS_DBA, and they probably won't create a. He probably doesn't. ' t help, either; probably, you connect PAS_DBA to create the table in any case.

• Third issue of page table of contents

  Our table of contents entries look like this:

  Chapter 1 Introduction... 1 1

  HOWEVER, if the table of contents goes beyond the second page, they lose the points of the leader:

  Chapter 99 Florbling 99 Grömitz - 1

  (No, we don't really have 99 chapters!)

  In my ignorance, I don't know how to solve this problem. In their (probably smaller) ignorance, nor do my frame internal 'experts '. I wandered around menus and help without making any progress.

  I'm under 8.0p266, unstructured.

  Thanks in advance for any idea!

  How to debug this?

  Provide more details.

  What is available to columns (number, Gap, margins, is side heads active)?

  What is the specification of tab stop for the xyzzyTOC formats that do not reach right?

  I've seen problems when the tab stop is set to 'exactly' the width of the column. It is a particular problem that you declare directly a CW. It is calculated the size of the page margins to one side and the gap. Rounding and accuracy problems can cause the effective CW to be slightly smaller than you think it is.

  I usually put the stop to 0.01 inch lower in xyzzyTOC formats.

  You can try using a smaller tab stop and see if the points appear as if by magic.

• [How to solve an ORA-00600 [723] [51202] [1] [51200] []]

  What is this error?
  
  I don't understand how this error created? I've heard a lot? can someone tell me please how to recover from this mash?
  
  What is the cause of this error? UX to solve? /
  
  Thanks and greetings
  VD
  
  Published by: vikrant dixit on November 17, 2008 04:44

  It is generally a good idea to contact the Support of Oracle in the case of an ORA-600 (or an ORA-7445, by the way), but it is a tool for research on MetaLink
  the search tool of the ORA-600/7445 (Doc ID 153788.1), which can help you diagnose common problems.

  This error, w / first argument of 723, is leaking on the PGA TOUR. It doesn't cause any of the database and can probably be ignored. If leak errors are persistent, you can set the event 10262 to ignore small leaks below a certain threshold value. In addition, you should check Doc ID 39308.1 for more specific information on this ORA-600.

  -Mark