C4180 all in questions a printer cartridge

I just tried to mount the photo ink jet cartridge specially bought from HP, so I can begin to print my own photos.

I have normally 1 x black and 1 x colour - that will work perfectly.

The only place where the new Inkjet Photo will fit is in the right section, but it only prints black and white-it is does not fit in the left at all and the printer telling me must be in the left hand, but does not correspond to...

I tried to keep in the ink jet color normal on the left + the new photo on the right, but it was a right mess

any help would be greatly appreciated

Hi dunworking,

Welcome to the HP Forums.

I see by your post that fits the photo cartridge to replace the black cartridge but it will print in black and white. I can help you with that.

What is the number of cartridge, you have for the color photo cartridge?

Make sure that it does not show 100 gray Photo cartridge.

Color and black cartridges should be 92 and 93.

The Photo cartridge should be 99.

The gray Photo cartridge should be 100.

This information is provided by the manual on page 17.

HP Photosmart C4100 all-in-one series.

The slot for the print cartridge print cartridge three colors is on the left side.

The slot of print cartridge for the black print cartridges and photo are on the right side.

If there is anything else I can help you with just let me know.

Good day.
Thank you.

Tags: HP Printers

Similar Questions

  • HP Photosmart C4180 all in question a cartridge

    Hello

    I need assistance with my printer.  Before changing the cartridge, my printer started printing in black and pink only.  So, I bought a combo with a #95 pack & cartridge one #98 in the pack with an end date of warranty to April 2011. I only replaced the cartridge three colors (#95) given that black was still used. When I close the door of ink cartridge, I immediately get an error "ink cartridge problem: remove and check color cartridge '. I put the old cartridge and the error disappears. I tried to clean the printer, cartridge, etc with no luck.  My OS is Windows Vista, service pack 1.  I have had no changes to the operating system at the start of this problem. Short buying new printer cartridges, I thought I would check with you that I wouldn't have to spend the extra money because the cartridge is defective.

    Thank you.

    Tell them clearly that the printer works fine with another cartridge and not with this one. The question therefore with the cartridge and not the printer. So the printer warranty does not come in the picture and the fact of the guarantee of the cartridge. Ask them to replace it and if it doesn't, ask to speak to a supervisor.

  • 6600 HP all-in-one: 6600 printer cartridges need to be replaced as often

    The color on this printer cartridges need to be changed all the time and I do not print in color.  So when I'm ready to print something it will not print in black only.  Can I replace the cartridges in black and use black only?  Black doesn't last for long either but...  Very disappointed with this printer.  Had the impression that I could print in black only when other lack which is not correct.  It cost me more money to replace the cartridges what it would cost to buy another printer, which I am looking in now.  I buy cartridges very long service life also.

    Thank you

    Thanks Gemini02
    I have asked questions about this at Best Buy and I was told the same thing. Unfortunately, it can't be avoided as you say. It is very expensive and as I said, I'm looking to buy a new printer, a laser printer this time.
    Thanks for the confirmation on my question.
    Hope this also answers Betsy2 question.

  • HP psc1350 all-in-one: check printer cartridge error will not clear

    In the middle of printing of the check print cartridge light error came.  The cartridges are faily new and there has been no discoloration.  I tried to remove and reinsert the cartridges, disconnect the printer from the computer, disconnect the printer, press Cancel.  Error will not clear

    Hey @dennisc10,

    Welcome to the Forums of HP Support!

    I understand that you have some problems with an error light on your PSC 1350 all-in-one printer. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done, this document explains How to solve the blinking lights on the printer.

    If after following the above you still can not clear the error, the printer needs to be replaced. You can contact the HP Support by clicking on this link and fill out the form below to discuss the options based on your warranty.

    Please let me know the results after following the above. If you are able to solve the problem or reach some resolution, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • C4180 all in one photo print problem

    Hello

    I have a c4180 all in one, the photo editor, Paintshop pro X 2.

    My photo colors and sharpness are perfect on the screen, but totally different once print (colder and not as strong). Any advice?

    Thank you

    Hi lyll.

    On what kind of paper do you print?

    Also what other printed photos other applications or just the computer, are they the same?

  • J4540 all in 1 print cartridge problem

    Solve the problem of ink cartridge (black) refer to the device display States documentationto - nothing is blocked.

    stop it, has released the plug, replaced the cartridge - any thoughts?-thank you.

    Hi Teresa813,

    Did you do any hardware changes or software on your computer before this problem?

    You can follow the steps in this link & check if it helps:

    j4540 all in one – "incompatible print cartridge".

    Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Reference: Troubleshoot aligning the print cartridge

    Hope the helps of information.

  • 940c print cartridge question

    Hello!  The print cartridge is flashing on my 940 c and so the printer does not print.  I installed new color and black cartridges for only this problem - no solution.  I pulled out, put them back and waved them, open the cover, closed the lid... all I can think.  I watched the previous answers to questions like that and have made sure it is plugged directly into the wall. I looked at the guide to what the lights mean on the HP website, but can't seem to find a solution that works.  I got a call from the ink on with the last cartridges installed (not sure what cartridge was the culprit - they look very good, just black ink everywhere else)-ink got everywhere inside the printer when it was stored for a period of time.  I'm almost certain that this is what is complicate measures here.  I cleaned all surfaces I can reach (on a q - Tip rubbing alcohol), but that did not stop light either. Thoughts before I declare patients dead?  Thank you!

    That the users of the water-based ink printer, clean with water!   Clean the contacts in the transport and on the ink cartridge.   I still have parts for this model amd probably still a whole unit in my basement.

  • HP Deskjet 2540 all-in-one series printer need all the model compatible ink cartridge

    Need of compatible cartridges for HP Deskjet 2540 all-in-one series printer. Need all the compatible ink cartridge model #' s. hard to find here in Tahiti (Moorea).

    Hello @bubbamoorea,

    Welcome to the HP Forums!

    I understand that you need compatible ink cartridges for the Deskjet 2540. I will do my best to help you. I recommend the continuation of this entire HP document on cartridges. You can go to the website of HP SureSupply here, which shows the compatible ink for your printer cartridge (HP 61 black and tri-color 61).

    You can also buy these cartridges on this Web site. If you have any further questions, please let me know. Have a good night!

  • My C4485 All in One Printer displays "incompatible print cartridge".

    My C4485 all in a poster "Incompatible print cartridge" against a half used, 351XL real color cartridge. If I run the 'diagnostic print page', it runs and print in color! and will sometimes print normally for a short period. Have tried cleaning the contacts, etc..  My system is Windows XP SP3, the printer serial number is TH86BD216F. On the point of... Start > control > events overview > System... Watch "HP Cue device not started" can anyone advise if the problem is probably caused by... My computer, the printer, or the cartridge? Would be grateful for any help.

    Brian-E-G

    Hi Rudy.

    The problem is now resolved, but in an unexpected way. Make your answer that there is no "quick fix" decided the glance to the software via... Windows Explorer > My Computer > c drive > programs > HP and everything by browsing files spotted a title 'Chrome', remembering that, among other things, I had recently uninstalled Google Chrome, reinstalled it and WOW! the printer now works thanks for that it was your interaction that led this research. However, it raises another question - how can I remove Chrome and does not affect the printer?

    Thanks a lot Brian-E-G.

  • C4180 all-in-one, bought 2007 - Dungeon error message color cartridge not installedcorrectly

    C4180 all-in-one, bought 2007-Windows XP - color cartridge not installed error message

    correctly. Replacement cartridge, worked well for two weeks, then the message came again many

    times. Removed the color ran only black. Clean the cartridge color (3/4 full) and clean the area inside

    where cartridge inserts, Reinserted. Worked OK for a week, then the message reappeared. While

    week, did not have access cartridges, just be added paper. Using genuine HP cartridges only!

    Looks like the error got stuck in the printer memory.  A hard reset should clear.

    To do a hard reset:

    1. Make sure that the printer is turned on.
    2. Pull out the power cord from the printer.
    3. Pull out the power cord from the wall.
    4. Wait 30 seconds.
    5. Plug everything up and turn on the printer.

    That should clear the error.  Let me know what happens.

  • The problems of alignment of the HP all-in-one print cartridge and color copier product families

    Click here for a detailed description of the following steps to solve the problems of alignment of print HP all-in-one cartridge and color copier product families.

    Step 1: review the alignment page paper was printed on
    Second step: the alignment page prints correctly
    Third step: perform a print cartridge cleaning procedure
    Step 4: try to align the page again
    1 automatic alignment of cartridges
    2 models with the semi-automatic print cartridge alignment
    3 "errors of alignment page not detected."
    4 additional information
    a. examples of alignment pages
    (b) without going through the print cartridge alignment

    Click here for assistance based on the cartridge system is using your printer.

    Click on the laurels on the left side to help and click on accept as Solution to a solution. I work for HP.

    Best regards
    Kenneth

    I hope this helps!

  • Suddenly, my 4215 all in one HP printer error message reads "remove and check right cartridge".

    My all-in-one 4215 printer suddenly flashes an error message on the screen saying "remove and check right cartridge"... For what I'm checking, it is unclear. I deleted and reinstalled the cartridge and it seems OK to me... It is not empty, and the last thing that he printed was fine... Help!

    I am betting that the printer or the ink cartridge contacts are dirty. This happens over time. The document below will guide you through cleaning the contacts. Let me know what happens.

    http://goo.GL/9oXc9

  • OfficeJet 6300 all-in-One, the error message which is print cartridge is open

    I use my all-in-one HP Officejet 6300 as a standalone Copier, because he's too old to install it on my Windows 7. Now, I get the error message that the print cartridge door is open. I can't find any door open but can not use the machine until I get rid of this message.

    I solved my problem by placing a heavy book on top of the printer. Apparaently, something is a little out of place and the book guard door is closed properly. Not a very technical solution, but it worked for me

  • e-All-In-One series C410: HP Photosmart - black print cartridge produces only "ghost image".

    The black print cartridge produces a ghost image.  I installed a new cartridge with the same results.  The photo and 3 color cartridges cartridge are all ok.  I also introduced "clean printhead" and ran a "print quality report", where black could not appear in the report.

    Dragon fur, I rechecked possible solutions in your response, and after a new test of everything that I had already done, I noticed an alignment test.  That was the problem.  I tried to clean the print heads, as a last resort, on my 4 year old printer.  Solution: I bought a new printer.

    Thank you for your wonderfully detailed answer.

  • 4380 all-in-one printer does not detect the print cartridge

    My all-in-one printer (model 4380 vivera, bought in Switzerland) does not detect the print cartridges. I traded the color cartridge with that of another, older than I was and now everything is fine. I don't know when, this problem will arise again. The last time I was so frustrated that I bought another printer (HP 2050) which seems to work without problems. I have unplugged, replugged and clean the cartridges with filtered water. The problem may arise at any time. Help, please. Thank you.

    I'm sorry you have a problem with your ink not detected.

    The problem may be because the printer is of the Switzerland and the ink cartridges are NOT. The printer will only accept cartridges of the same region/country.

    For example, if you are in the United States and buy a printer and the cartridges come from GERMANY, he cannot read. Will suit most, but some of the contacts are different causing not well read the cartridge from the printer.

Maybe you are looking for

  • HP Pavilion p6733w: BIOS version question

    HP experts out there or anyone with better information resources?  I'm looking for what type of BIOS initially provided with my computer, a HP Pavilion p6733w with a motherboard RS880 H-Alvorix.

  • Re: How to reset Satellite P200-12V in factory State?

    Hello I need help to reset my computer (Satellite P200-12V) in factory State. After turning on my computer, I get "blue screens of death" after a few minutes.I tried to download the drivers, where it was due to a bad, but the problem remains.The only

  • D2 Hard Drive Extreme maintenance?

    Recently, I got intermittent connection on my external drive problems.  http://www.LaCie.com/support/desktop-storage/D2-extreme-triple/ Should I do any function of regular maintenance to keep it in good working order?  I tried to run the disk first a

  • I have a Windows 95 system and I lost (?) my wave output device driver.

    I'm playing the chills (great game by the way) and it is played on this computer before, but I changed the screen and it will no longer play. The game will not play on 64 - bit systems, but it will be 32 bit and this system as is the only one in the

  • Windows XP windows not to load not

    I get a black screen with blinking cursor, F1 for Setup works but there is no help.  F10 for recovery of the system does not work.  Could not load the same in safe mode