Help - error invalid reference when closing file
The problem is that the function "Close TDMS" generates the following error message:
-------------------------------------------
Error-2501 occurred at close TDMS in host pc.vi
The possible reasons: Reference to invalid TDMS files.
------------------------------------------
What is so strange about it, as you can see on the screenshot, is that many other functions uses the file reference without any problem whatsoever, but when it gets to the close function, an error is generated. I probed the wire of error at each step, and there is no error that occur before the close of tdms file function.
Just to help understand the function: a file temporary tdms is created and all data from the raw data file is stored on it. A list is generated from all the names of valid channel (channels named something other than "*" "") and then these valid channels only is read from the temporary file PDM and written in the final output file. The files are so big the read and write functions must be placed in loops so that the data is read/written a line/column at the time and the entire 90 MB file is not loaded into RAM.
Can someone help me? I really need to understand what is happening. Code examples would be useful.
Change all the tunnels that you use for the refnum in those loops to Shift Registers.
If the loop For travels '0' time the refnum passes not valid.
Ben
Tags: NI Software
Similar Questions
-
When you try to use the texture of the paper adobe pro with CC2015, I get: error a reference to a file / folder: 104
-
Error code: 0x8007045D when transferring files to the card reader.
Original title: Error code: 0x8007045D
Error code: 0x8007045D when transferring files to the card reader. Lost files. Running Windows 7.
Hi Bernard Major,.
1 did you change the permission for the files you are trying to copy?
2. What place you are trying to copy the files?
3. are you able to copy the same files on another computer?
You can try to copy files to another location on the computer and check.
Step 1:
I recommend you to check if you have enough permission on the card reader to transfer files.
See the link to apply authorization:
What to know before applying permissions to a file or folder
Step 2:
If you're still having problems, then run Check disk to repair the bad sectors.
a. Click Start, in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.
b. Type X: (for the card reader drive letter) and press enter
c. at the command prompt, type chkdsk /f and then press ENTER.
Now, type chkdsk/r
Note: CHKDSK would attempt to recover bad sectors on the hard disk, in the course of this process there are chances of DATA loss from that particular area. You can save the data on the disk before you perform a checkdisk.
For more information, refer to the article below.
Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."
http://support.Microsoft.com/kb/952272
Note: This article remains valid for Windows 7 also.
I also suggest you to check this problem with another USB plug.
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
19502 exception encountered when closing file
19502 exception encountered when closing file
ORA-19502: write error on file ' / u01/app/oracle/product/10.2.0/db_1/dbs/arch1_322_724157394.dbf ', blockno 49153 (blocksize = 512)
ORA-27063: number of bytes read or written is incorrect
UNIX SVR4 Intel error: 28: no space is available on the device
What should I do?
your early reply is appreciated.Do not need any configuration, running just above commands via rman after the removal of the archive logs.
-
Error "Invalid line" when you use the command tableFile - ttImportFromOracle
Execution of the order and got an error, as shown below:
c:\oracle>ttImportFromOracle -oraConn myUser/myPassword@myDB -tableFile C:\oracle\table_list.txt Error: Invalid Line 'mySchema.myTable2' in file 'C:\oracle\table_list.txt' Use '-help' for more information
table_list.txt looks to below, except I have 112 tables total in the list, a table by line, as indicated in the help documentation.
mySchema.myTable
mySchema.myTable1
mySchema.myTable2
I tried to make the file table_list.txt have only the table (without figure) names and the same error occurs.
Invalid line is always the last table in the file. So if I take off the table she complains, she complains always just whatever the table is the last in the file.
Can someone tell me what I am doing wrong?
Thank you
Matt
To work around the error, I just used - tables instead.
-
1074384864 error [invalid reference was passed to a NOR-XET session]
Hi all
I get an error when I try to convey CAN frame using the bus OR MAX monitor. I use the version of NOR-XNET 14.0.
Full error in the attachment below.
I check why I can't write messages on the CAN bus. I receive messages, analyze, process and draw on a device CAN radar targets. But communication has been a bottleneck.
Any help is very appreciated.
Kind regards
It was strange, but I thought about it now. A few restarts did not work, but then he did.
I translated the write function in my code as well.
-
HELP: error code 800b0100 when you run the KB981332 update
I am bang of ideas on it - have been trawling the foums, connected issues with HP and MS and all without success so far. Other updates seem to run OK.
I have fairly new CPQ Presario notebook with factory version Windows 7 Home Premium 64 - bit preset with the trial versions of Norton Internet security and online backup. I deleted the backup utility and modernized purchased NIS 2010 edition.
Latest updates installed successfully are KB971468, KB972270, KB974431 (35 listed) etc.
As I don't have an OEM CD or DVD as a set of HP Recovery DVD. I seem to have only 1 option, or so say MS supports, namely restoring in the construction of the plant and start over. Needless to say, I don't want to do that.
I tried a lot of things probably too many to mention including CFS, deleting the SoftwareDsitribution files. removal of NOrton (removal tool) etc. Am desperate for more help - surely to goodness it is possible to fix this without wiping everything.
Contents of log files ON:
Preparation of control system was updated.
Binary version 6.1.7600.20667
Package, Version 8.0
2010-05-14 15:00Checking Windows Service Packages
Checking of manifests package and catalogs
(f) CBS MUM corrupt 0x800F0900 servicing\Packages\Package_2_for_KB981332~31bf3856ad364e35~amd64~~6.1.1.0.mum line 1:
(f) CBS catalogue Corrupt 0x800B0100 servicing\Packages\Package_2_for_KB981332~31bf3856ad364e35~amd64~~6.1.1.0.cat
(f) CBS MUM corrupt 0x800F0900 servicing\Packages\Package_for_KB981332_RTM~31bf3856ad364e35~amd64~~6.1.1.0.mum line 1:
(f) CBS catalogue Corrupt 0x800B0100 servicing\Packages\Package_for_KB981332_RTM~31bf3856ad364e35~amd64~~6.1.1.0.cat
(f) CBS MUM corrupt 0x800F0900 servicing\Packages\Package_for_KB981332~31bf3856ad364e35~amd64~~6.1.1.0.mum line 1:
(f) CBS catalogue Corrupt 0x800B0100 servicing\Packages\Package_for_KB981332~31bf3856ad364e35~amd64~~6.1.1.0.catChecking package Watchlist
Watchlist checking
Checking packages
Control components store
(f) CSI shows all zeros 0 x 00000000 winsxs\Manifests\amd64_microsoft-windows-scripting-vbscript_31bf3856ad364e35_6.1.7600.20662_none_a4eb348760a82021.manifest amd64_microsoft-windows-writing of scripts - vbscript_31bf3856ad364e35_6.1.7600.20662_none_a4eb348760a82021
(f) CSI shows all zeros 0 x 00000000 winsxs\Manifests\wow64_microsoft-windows-scripting-vbscript_31bf3856ad364e35_6.1.7600.20662_none_af3fded99508e21c.manifest wow64_microsoft-windows-writing of scripts - vbscript_31bf3856ad364e35_6.1.7600.20662_none_af3fded99508e21c
(f) CSI shows all zeros 0 x 00000000 winsxs\Manifests\amd64_microsoft-windows-scripting-vbscript_31bf3856ad364e35_6.1.7600.16546_none_a47b38bc4776add1.manifest amd64_microsoft-windows-writing of scripts - vbscript_31bf3856ad364e35_6.1.7600.16546_none_a47b38bc4776add1
(f) CSI shows all zeros 0 x 00000000 winsxs\Manifests\wow64_microsoft-windows-scripting-vbscript_31bf3856ad364e35_6.1.7600.16546_none_aecfe30e7bd76fcc.manifest wow64_microsoft-windows-writing of scripts - vbscript_31bf3856ad364e35_6.1.7600.16546_none_aecfe30e7bd76fccSummary:
Seconds executed: 456
Find 10 errors
CSI shows all zeros Total count: 4
CBS MUM corrupt count: 3
Total corrupt CBS catalog number: 3Unavailable repair files:
winsxs\manifests\amd64_microsoft-Windows-Scripting-vbscript_31bf3856ad364e35_6.1.7600.20662_none_a4eb348760a82021.manifest
winsxs\manifests\wow64_microsoft-Windows-Scripting-vbscript_31bf3856ad364e35_6.1.7600.20662_none_af3fded99508e21c.manifest
winsxs\manifests\amd64_microsoft-Windows-Scripting-vbscript_31bf3856ad364e35_6.1.7600.16546_none_a47b38bc4776add1.manifest
winsxs\manifests\wow64_microsoft-Windows-Scripting-vbscript_31bf3856ad364e35_6.1.7600.16546_none_aecfe30e7bd76fcc.manifest
servicing\packages\Package_2_for_KB981332~31bf3856ad364e35~AMD64~~6.1.1.0.mum
servicing\packages\Package_2_for_KB981332~31bf3856ad364e35~AMD64~~6.1.1.0.mum
servicing\packages\Package_for_KB981332_RTM~31bf3856ad364e35~AMD64~~6.1.1.0.mum
servicing\packages\Package_for_KB981332_RTM~31bf3856ad364e35~AMD64~~6.1.1.0.mum
servicing\packages\Package_for_KB981332~31bf3856ad364e35~AMD64~~6.1.1.0.mum
servicing\packages\Package_for_KB981332~31bf3856ad364e35~AMD64~~6.1.1.0.mum
servicing\packages\Package_2_for_KB981332~31bf3856ad364e35~AMD64~~6.1.1.0.cat
servicing\packages\Package_2_for_KB981332~31bf3856ad364e35~AMD64~~6.1.1.0.cat
servicing\packages\Package_for_KB981332_RTM~31bf3856ad364e35~AMD64~~6.1.1.0.cat
servicing\packages\Package_for_KB981332_RTM~31bf3856ad364e35~AMD64~~6.1.1.0.cat
servicing\packages\Package_for_KB981332~31bf3856ad364e35~AMD64~~6.1.1.0.cat
servicing\packages\Package_for_KB981332~31bf3856ad364e35~AMD64~~6.1.1.0.cat
Operating system: Windows 7technical skills: intermediate
First name: John
First name: Bury
Phone: 02380780446
E-mail: * e-mail address is removed from the privacy *.Initially I just installed the NIS bought without removing the trial.
During the period 60-day trial free NIS already expired by the time where you have installed the version purchased NIS? [Yes/No]
The foregoing despite...
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135I suspect that one or more protections in real-time of NIS may interfere with installation ofKB981322. Contact the Norton Support for assistance or see if KB981322 will install after a "clean boot" by KB929135.
In turn, and if you have no material yourself did use following specific support security update...
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
Or you can...
Start a free Windows Update support incident email request:
https://support.Microsoft.com/OAS/default.aspx?Gprid=6527Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/
For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx
For enterprise customers, support for security updates is available through your usual support contacts.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Hello
You are not directly correct the VRO login page login, please take new private window and open the URL. https://IP:8283 / vco-config /
-
Need help to remove CS4 when getting the error: the required files are missing
Attempt to delete CS4 turned off my computer.
The uninstall program will not start on any program - I get an error indicating that the required files are missing to launch the programs.
Anyone know a work around? I know I can drag files of applications to the trash, but I want to get everything in all areas of the computer, since I am recovering used HD storage. I'm on a Macbook, OS 10.10.2
Thank you
Scott
Irrelevant. Your installation is never worked first place right after the upgrade to 10.10... Simply trash the files.
Mylenium
-
Error code 1 when writing to text file
I have an error code 1 when I try to write to a text file in my application. Really, I don't understand and don't know how to solve this problem.
If anyone can help me please fix this, it would be greatly appreciated!
Do not close the file in the box 0. It closes only after your while loop ends. Keep your refnum file stored in a shift register.
My guess is that you open the file outside the while loop and you pass in the refnum and use it in the box 0. Then you close the file that kills the refnum. Then, you open the file again (possibly automatically with read) then close that. When you get to the enclosure 1, you use the same refnum you originally opened up to the outside, but that was closed and is now invalid.
-
Yesterday, I was using my laptop at the farm level is critical. When I stopped him, 9 updates began to occur when closing. Unfortunately, the laptop ran out of battery before that update has been completed. When I rebooted the professional windows xp, an error message "one of the files in the registry database had to be recovered by use of one newspaper or another copy. Recovery succeeded. "came and this message constantly comes up whenever I start windows. I have no CD with me as the operating system has been installed by the IT Department of my employer and I do not want to reinstall windows. I do not know how to change, and then make the changes in the registry via regedit. If anyone know to solve this problem, I would appreciate your help. I never wait for windows updates could cause such problems.
Hello
- Your computer is on the field?
If it is connected to a domain, then you can post your query in this link:If it is not then what is the error message in the history of the magazine update on the windows update site?See also fix it for windows updates. -
Invalid number when reading a flat file
Hello Experts,
I have the following flat file format and I want to insert it into a table
I have an error invalid number.
How can I stop reading the file when it reaches the empty line before the grand total
file
code---------------------------------------------------------------------------------------------------------------------------------- TOTAL PAID TOTAL EXPIRED TOTAL FRAC OUTSTANDING WINNERS TODAY PAID TODAY EXPIRED ROUND DRAW/SET AMOUNT AMOUNT AMOUNT AMOUNT AMOUNT AMOUNT AMOUNT ------------ ----------- ----------- ----------- ----------- ----------- ------- ----------- 1/ 1 6857068.00 0.00 5879902.00 0.00 977166.00 0.00 0.00 2/ 1 5907322.00 0.00 5463759.00 0.00 443563.00 0.00 0.00 3/ 1 7277181.00 0.00 6551708.00 0.00 725473.00 0.00 0.00 4/ 1 37503734.00 0.00 36656046.00 0.00 847688.00 0.00 0.00 5/ 1 4879934.00 0.00 4293514.00 0.00 586420.00 0.00 0.00 6/ 1 15604133.00 0.00 15172198.00 0.00 431935.00 0.00 0.00 7/ 1 4943514.00 0.00 4425254.00 0.00 518260.00 0.00 0.00 8/ 1 6493874.00 0.00 5745660.00 0.00 748214.00 0.00 0.00 9/ 1 23195487.00 0.00 22279945.00 0.00 0.00 0.00 915542.00 10/ 1 5480445.00 0.00 4981615.00 0.00 0.00 0.00 498830.00 11/ 1 5421101.00 0.00 4852814.00 0.00 0.00 0.00 568287.00 12/ 1 22644465.00 0.00 21987329.00 0.00 0.00 0.00 657136.00 13/ 1 6310425.00 0.00 5582127.00 0.00 0.00 0.00 728298.00 14/ 1 5986847.00 0.00 5471429.00 0.00 0.00 0.00 515418.00 15/ 1 6699299.00 0.00 6080687.00 0.00 0.00 0.00 618612.00 16/ 1 7549513.00 0.00 6842058.00 0.00 0.00 0.00 707455.00 17/ 1 43951014.00 0.00 42538841.00 0.00 0.00 0.00 1412173.00 18/ 1 6275029.00 0.00 5608261.00 0.00 0.00 0.00 666768.00 19/ 1 34023432.00 100.00 33066516.00 0.00 0.00 0.00 956916.00 20/ 1 5496324.00 0.00 5029237.00 0.00 0.00 0.00 467087.00 21/ 1 5791146.00 0.00 5281256.00 0.00 0.00 0.00 509890.00 22/ 1 7121128.00 0.00 6419500.00 0.00 0.00 0.00 701628.00 23/ 1 36121507.00 0.00 35211831.00 0.00 0.00 0.00 909676.00 24/ 1 10137379.00 0.00 9660197.00 0.00 0.00 0.00 477182.00 25/ 1 4267656.00 200.00 3875040.00 0.00 0.00 0.00 392616.00 26/ 1 8656241.00 561.00 7744762.00 0.00 0.00 0.00 911479.00 27/ 1 10023865.00 400.00 9070015.00 0.00 0.00 0.00 953850.00 28/ 1 15201340.00 1188.00 13795352.00 0.00 0.00 0.00 1405988.00 29/ 1 83052341.00 2773.00 80673373.00 0.00 0.00 0.00 2378968.00 30/ 1 7137232.00 1000.00 6459875.00 0.00 0.00 0.00 677357.00 31/ 1 25472826.00 1700.00 24487312.00 0.00 0.00 0.00 985514.00 32/ 1 5679593.00 4398.00 5094378.00 0.00 0.00 0.00 585215.00 33/ 1 19360140.00 32659.00 18144162.00 0.00 0.00 0.00 1215978.00 34/ 1 5350117.00 1059167.00 1059167.00 0.00 0.00 0.00 4290950.00 GRAND TOTAL ########.## 1104146.00 ########.## 0.00 5278719.00 0.00 25108813.00 End of Report
any help would be greatly appreciated.declare l_start_file_name varchar2(50) := 'liab_report_summary_p008_c'; l_end_file_name varchar2(50) := '_english.rep'; l_file_name varchar2(100); l_sql varchar(32767); refresh_cdc varchar2(10) := '00540'; Begin l_file_name := l_start_file_name||REFRESH_CDC||l_end_file_name; l_sql := 'create or replace directory GTECHFILES as ''/ftpfiles/gtechfiles/acct_'||REFRESH_CDC||''''; execute immediate l_sql; l_sql := ' CREATE TABLE LOTO_LIABILITY_REPORT_temp '|| ' ( '|| ' draw_number varchar2(50), '|| ' total_winners_amt number, '|| ' paid_today_amt number, '|| ' total_paid_amt number, '|| ' expired_today_amt number, '|| ' total_expired_amt number, '|| ' frac_round_amt number, '|| ' outstanding_amt number '|| ' ) '|| ' ORGANIZATION EXTERNAL '|| ' ( TYPE ORACLE_LOADER '|| ' DEFAULT DIRECTORY GTECHFILES '|| ' ACCESS PARAMETERS '|| ' ( records delimited by newline '|| ' LOGFILE TEMPDIR:''loto_liability_report.log'' '|| ' SKIP 8 '|| ' FIELDS LDRTRIM '|| ' MISSING FIELD VALUES ARE NULL '|| ' ( '|| ' draw_number (1:11) char(11), '|| ' total_winners_amt (14:24) char(11), '|| ' paid_today_amt (26:36) char(11), '|| ' total_paid_amt (38:48) char(11), '|| ' expired_today_amt (50:60) char(11), '|| ' total_expired_amt (62:72) char(11), '|| ' frac_round_amt (74:80) char(11), '|| ' outstanding_amt (82:92) char(11) '|| ' ) '|| ' ) '|| ' LOCATION ('''||l_file_name||''') '|| ' ) '|| ' REJECT LIMIT UNLIMITED '|| ' NOPARALLEL '|| ' NOMONITORING '; execute immediate l_sql; l_sql := ' insert into LOTO_LIABILITY_REPORT '|| ' ( draw_number , '|| ' total_winners_amt , '|| ' paid_today_amt , '|| ' total_paid_amt , '|| ' expired_today_amt , '|| ' total_expired_amt , '|| ' frac_round_amt , '|| ' outstanding_amt , '|| ' source , '|| ' inserted_DATE , '|| -- ' UPLOADED ,'|| ' CDC '|| ' ) '|| ' SELECT '|| ' draw_number , '|| ' TO_NUMBER(total_winners_amt,''999,999,999.00'') total_winners_amt, '|| ' TO_NUMBER(paid_today_amt,''999,999,999.00'') paid_today_amt, '|| ' TO_NUMBER(total_paid_amt,''999,999,999.00'') total_paid_amt, '|| ' TO_NUMBER(expired_today_amt,''999,999,999.00'') expired_today_amt, '|| ' TO_NUMBER(total_expired_amt,''999,999,999.00'') total_expired_amt, '|| ' TO_NUMBER(frac_round_amt,''999,999,999.00'') frac_round_amt, '|| ' TO_NUMBER(outstanding_amt,''999,999,999.00'') outstanding_amt, '|| ' '''||l_file_name ||''', '|| ' sysdate , '|| --' ''N'' , '|| refresh_cdc || ' FROM '|| ' LOTO_LIABILITY_REPORT_temp '; dbms_output.put_line(l_sql); execute immediate l_sql; ll_sql :='drop table LOTO_LIABILITY_REPORT_temp'; execute immediate l_sql; exception when others then rollback; l_sql :='drop table LOTO_LIABILITY_REPORT_temp'; execute immediate l_sql; debug_message('LOTO_LIABILITY_REPORT_temp_UPLOAD/'||REFRESH_CDC,'Unexpected Error '||sqlerrm); END LOTO_LIABILITY_REPORT;
Thank you
KevinHello
You can do this:
Add this condition in the table definition
WHEN LOAD (total_winners_amt! = "#.") "#" and total_paid_amt! =" ###. "#" and draw_number! = BLANKS)
and do it for each column that can have this value...CREATE TABLE WEBUSER.LOTO_LIABILITY_REPORT_TEMP ( DRAW_NUMBER VARCHAR2(50 BYTE), TOTAL_WINNERS_AMT NUMBER, PAID_TODAY_AMT NUMBER, TOTAL_PAID_AMT NUMBER, EXPIRED_TODAY_AMT NUMBER, TOTAL_EXPIRED_AMT NUMBER, FRAC_ROUND_AMT NUMBER, OUTSTANDING_AMT NUMBER ) ORGANIZATION EXTERNAL ( TYPE ORACLE_LOADER DEFAULT DIRECTORY GTECHFILES ACCESS PARAMETERS ( records delimited by newline LOGFILE GTECHFILES:'loto_liability_report.log' SKIP 8 LOAD WHEN (total_winners_amt!="########.##" and total_paid_amt!="########.##" and draw_number != BLANKS) FIELDS LDRTRIM MISSING FIELD VALUES ARE NULL ( draw_number (1:11) char(11), total_winners_amt (14:24) char(11), paid_today_amt (26:36) char(11), total_paid_amt (38:48) char(11), expired_today_amt (50:60) char(11), total_expired_amt (62:72) char(11), frac_round_amt (74:80) char(7), outstanding_amt (82:92) char(11) ) ) LOCATION (GTECHFILES:'test.txt') ) REJECT LIMIT UNLIMITED NOPARALLEL NOMONITORING;You'll get in the log file:
LOG file opened at 06/28/10 22:16:51 Field Definitions for table LOTO_LIABILITY_REPORT_TEMP Record format DELIMITED BY NEWLINE Data in file has same endianness as the platform Rows with all null fields are accepted Load when ((TOTAL_WINNERS_AMT != ########.##) AND ((TOTAL_PAID_AMT != ########.##) AND (DRAW_NUMBER != BLANKS))) Fields in Data Source: DRAW_NUMBER CHAR (11) Record position (1, 11) Trim whitespace same as SQL Loader TOTAL_WINNERS_AMT CHAR (11) Record position (14, 24) Trim whitespace same as SQL Loader PAID_TODAY_AMT CHAR (11) Record position (26, 36) Trim whitespace same as SQL Loader TOTAL_PAID_AMT CHAR (11) Record position (38, 48) Trim whitespace same as SQL Loader EXPIRED_TODAY_AMT CHAR (11) Record position (50, 60) Trim whitespace same as SQL Loader TOTAL_EXPIRED_AMT CHAR (11) Record position (62, 72) Trim whitespace same as SQL Loader FRAC_ROUND_AMT CHAR (7) Record position (74, 80) Trim whitespace same as SQL Loader OUTSTANDING_AMT CHAR (11) Record position (82, 92) Trim whitespace same as SQL Loader KUP-04102: record 41 discarded from file c:\temp\test.txt KUP-04102: record 42 discarded from file c:\temp\test.txt KUP-04102: record 43 discarded from file c:\temp\test.txt KUP-04102: record 44 discarded from file c:\temp\test.txtORA-01722 exception has disappeared...
be very vigilant, you also should jump 6 instead of spend 8... -
Error number return when and ORA: 01722 invalid
Hi people, I posted this under another topic as well as eBusiness suite so apologies if some you've seen, but I would really appreciate the help on this one. Any suggestions are welcome.
We strive to create a calculation that returns the number of days of absence a person has had in a given period of time. We need answer these absences which began before the period and are closed during it, lack that begins during the period and ends after she and those that open and close that it contains.
The period is always a rolling 6 months from sysdate.
It's the calc we found so far that works for some people, but we get the error invalid number if the absence includes a half-day - so 0.5, 1.5, etc..
It's probably more complicated, but we are not the techno at all so learn we will!
We use the business district of HRMS - Administration - Oracle Human Resources (Core) 10G and the folders present Absence and nobody.
SUM (TO_NUMBER (NVL ((CASES WHERE the Attendance.Actual Absence Start Date < TO_DATE (ADD_MONTHS (SYSDATE,-6), 'DD-Mon-YYYY') THEN (BOX WHEN presence Absence.)))) "" Actual end date ' > SYSDATE SO (WORKING_DAYS_BETWEEN (TO_DATE (ADD_MONTHS (SYSDATE,-6), 'DD-Mon-YYYY'), SYSDATE)) else (CASE WHEN (BOX WHEN TO_DATE (ADD_MONTHS (SYSDATE,-6), 'DD-Mon-YYYY') > = Absence Start Date of Attendance.Actual THEN (WORKING_DAYS_BETWEEN (TO_DATE (ADD_MONTHS (SYSDATE,-6), 'DD-Mon-YYYY'), presence of Absence.)))) (("" Actual end date ")) ELSE (CASE WHEN (WORKING_DAYS_BETWEEN (Start Date of Attendance.Actual of Absence, presence of Absence." Actual end date")) IS NULL SO (WORKING_DAYS_BETWEEN (Attendance.Actual of Absence Start Date, SYSDATE)) ELSE (BOX WHEN SYSDATE < = presence Absence.) "" Actual end date ' THEN (WORKING_DAYS_BETWEEN (Attendance.Actual of Absence Start Date, SYSDATE)) ELSE (WORKING_DAYS_BETWEEN (Start Date of Attendance.Actual of Absence, presence of Absence." (((Actual end date")) END) END) END) IS NULL SO (WORKING_DAYS_BETWEEN (TO_DATE (ADD_MONTHS (SYSDATE,-6), 'DD-Mon-YYYY'), SYSDATE)) else (BOX WHEN TO_DATE (ADD_MONTHS (SYSDATE,-6), 'DD-Mon-YYYY') > = Absence Start Date of Attendance.Actual THEN (WORKING_DAYS_BETWEEN (TO_DATE (ADD_MONTHS (SYSDATE,-6), 'DD-Mon-YYYY'), presence Absence.))) (("" Actual end date ")) ELSE (CASE WHEN (WORKING_DAYS_BETWEEN (Start Date of Attendance.Actual of Absence, presence of Absence." Actual end date")) IS NULL SO (WORKING_DAYS_BETWEEN (Attendance.Actual of Absence Start Date, SYSDATE)) ELSE (BOX WHEN SYSDATE < = presence Absence.) "" Actual end date ' THEN (WORKING_DAYS_BETWEEN (Attendance.Actual of Absence Start Date, SYSDATE)) ELSE (WORKING_DAYS_BETWEEN (Start Date of Attendance.Actual of Absence, presence of Absence." (((((Actual end date")) END) END) END) END) END) else (WHEN BOX (BOX WHEN TO_DATE (ADD_MONTHS (SYSDATE,-6), 'DD-Mon-YYYY') > = Absence Start Date of Attendance.Actual THEN (WORKING_DAYS_BETWEEN (TO_DATE (ADD_MONTHS (SYSDATE,-6), 'DD-Mon-YYYY'), presence Absence.)))) (("" Actual end date ")) ELSE (CASE WHEN (WORKING_DAYS_BETWEEN (Start Date of Attendance.Actual of Absence, presence of Absence." Actual end date")) IS NULL SO (WORKING_DAYS_BETWEEN (Attendance.Actual of Absence Start Date, SYSDATE)) ELSE (BOX WHEN SYSDATE < = presence Absence.) "" Actual end date ' THEN (WORKING_DAYS_BETWEEN (Attendance.Actual of Absence Start Date, SYSDATE)) ELSE (WORKING_DAYS_BETWEEN (Start Date of Attendance.Actual of Absence, presence of Absence." (((Actual end date")) END) END) END) IS NULL SO (WORKING_DAYS_BETWEEN (TO_DATE (ADD_MONTHS (SYSDATE,-6), 'DD-Mon-YYYY'), SYSDATE)) else (BOX WHEN TO_DATE (ADD_MONTHS (SYSDATE,-6), 'DD-Mon-YYYY') > = Absence Start Date of Attendance.Actual THEN (WORKING_DAYS_BETWEEN (TO_DATE (ADD_MONTHS (SYSDATE,-6), 'DD-Mon-YYYY'), presence Absence.))) (("" Actual end date ")) ELSE (CASE WHEN (WORKING_DAYS_BETWEEN (Start Date of Attendance.Actual of Absence, presence of Absence." Actual end date")) IS NULL SO (WORKING_DAYS_BETWEEN (Attendance.Actual of Absence Start Date, SYSDATE)) ELSE (BOX WHEN SYSDATE < = presence Absence.) (("" END END END END END actual end Date ' THEN (WORKING_DAYS_BETWEEN (Attendance.Actual of Absence Start Date, SYSDATE)) ELSE (lack Attendance.Duration days))), (DAYS_BETWEEN (Start Date of Attendance.Actual of Absence, presence of Absence." ((Actual end date'))), '999999990 D 00'))Hello
It could be that it's because you use SYSDATE that contains both as a fraction and not trunc (sysdate) that contains at present. It could be that your working_dates_between triggers this error.
However, your formula is much more complicated that it should be.
First of all, you want to watch the ADD_MONTHS (TRUNC (SYSDATE),-6) date at trunc (sysdate). So, you want to look the part of the absence which is located in the time stamp. It's the BIGGEST (Absence Attendance.Actual Start Date, ADD_MONTHS (TRUNC (SYSDATE),-6)) to LEAST (NVL (lack of attendance. (("" Actual end Date ", TRUNC (SYSDATE)), TRUNC (SYSDATE)). You may need to add 1 to the end of absence date because it is the last day of their absence, and not the date of their return. It depends on how you calculate the days between the beginning and the end
Date of the absence. You can create calculations for the date of beginning and end of the absences in the time window of 6 months. Create the AbsenceStart calculation asGreatest (attendance absence. Actual Start date, ADD_MONTHS (trunc (sysdate),-6))
and AbsenceEnd as
LESS (NVL (lack of attendance. (("" Actual end Date ", TRUNC (SYSDATE)), TRUNC (SYSDATE))
Next, you need to pick up only lack what part of the absence in your 6 months date window. To do this, you can use a condition in the workbook or a condition in a statement box. You must then calculate the difference between those dates and SUM all values.
SUM (CASE WHEN AbsenceEnd > = AbsenceStart THEN WORKING_DAYS_BETWEEN (AbsenceStart, AbsenceEnd) END)
That's all. Not so complicated after all.
Rod West
-
Cannot use the references in Subvi cluster (error 1055, invalid references)
Hello
I'm going through a lot of that through a cluster to a Subvi.
The idea here is to manipulate objects in the MainVI in the nodes property thorugh Subvi, which gains the reference number of the cluster.
In the Subvi, I use unbunling by name to access the references I need. However, I get an error 1055 (invalid references) every time I try to access the object by using the node property.
What I am doing wrong?
Attached you will find three files:
The mainVI: Main.vi
The Subvi: Single_Cam_RefBased.vi
The def of the type for the cluster: RefClusterTypeDefinition.ctl
Thanks in advance,
Marcel
SteveChandler wrote:
The constant you have wired to the bundle is not the same as the cluster of type defined wired to your Subvi.
I was going to say the same thing. This should be the first thing to try. (I haven't studied the Subvi, but it seems buggy too...)
COMMENT: Again something is screwed in the current VI which makes no sense. Hovering above the terminal should tell us information about the corecion, but in this case it is said that the terminal is something like a cluster of error. This might just be a cosmetic bug...
-
Hello
I could connect network printer and also to view its properties, but when I try to print it shows error.
Example: when I try to print a test page using the network printer, error
"Test page cannot print. You want to discover the convenience of printing support? Cannot create a file when that file already exists ".
I already try to remove the printer and installed again, again, has not worked for me. Someone has an idea for this?
Concerning
Original title: unable to print using network printer
Hi chungb,
Thank you for keeping us posted.
I would have you post your query in the Forums of Windows Server , as it is addressed to an audience of it professionals.
Check out the link-
http://social.technet.Microsoft.com/forums/en-us/winserverprint/threads
We know if you need help.
Maybe you are looking for
-
Cannot reconnect my Smartphone using Bluetooth
Hello world I have connected my Samsung Galaxy android for my Toshiba Satellite (windows 7) via Bluetooth to receive GPS data to use on my graphics path program. Easy to do, BUT if I disconnect the device and then try to connect again, BT Stack will
-
I forgot the need password for installation instructions parallel xp pro
I forgot my password and have the original xp pro cd and it's a version of regestered, I need to know the procedure to do a PARALLEL install help my drive
-
How to uninstall Bing Office v1.1
I installed the v1.1 of Bing Office tonight. It took almost never. When I was closing for the night, I found I can't get rid of the Bing toolbar or window which sound in. I tried to uninstall the program, but get a message that I have to wait unti
-
Help please, LogonUI.exe error
Hi, recently I turned on my desktop (windows vista) and it brought me to a black screen, and both boxes appeared. They say "LogonUI.exe - Bad Image MSIMG32.dll isn't is either not designed to run on windows or it contains an error. «Try to install th
-
Not have blackBerry smartphones to connect to internet
I realized that my phone is unable to connect to the internet, even if I am able to send and receive emails from my phone and my wifi connection is fine. I tried to take the battery, return service directories to my phone and I also went to the regis