HELP for re - configure RAID
I have a windows 8/4th GEN Envy 17 jo29nr. What they do not mention in the description of the form, it's that it comes with a 25 GB SSD for caching. In addition, the standard drive is a disk of 1 TB 5400 RPM / min. I removed the RAID to install an SSD, but now, I want to just put a 750 GB drive at 7200 RPM and reconfigure the RAID for the use of the Intel memory smart caching. But when I go to set up a RAID 0 volume, it will only allow me to (approximately) 44GB, twice the size of the available mSATA SSD. There is literally no option that will change that. Any help would be appreciated big time.
Heretikos,
When configuring RAID 0 with 2 hard disks of different size it always diminishes the largest room of the same size as the smallest for interlacing.
The smallest mSATA SSD in the system is to set up the Cache and no RAID 0 in the Intel rapid storage technology. It's original installation on your laptop.
Let me know if your still following this thread I'd like to talk with you more about this.
Tags: Notebooks
Similar Questions
-
NEED HELP for product configuration C4795 all-in-One printer!
Photosmart all-in-one C4795. Tried unistalling and reinstalling at LEAST 6 times. Guard getting so hung up "product configuration" followed by "Fatal Error During Installation." Running Windows 7 64 bit. Tried the CD supplied with the printer AND a version I downloaded from HP Tower. off prottection virus during the insltall, which will zip along and hangs on «Configure prouduct.» MADDENING!
OK, I'll do a L4 uninstall with the HP software.
1 cleaning disc on your computer - you can skip this step if you want to
-
I need help for configuring security for my wireless again.
Need a help for my Wi - Fi Protected Access set up again... somehow I deleted it while trying to access the networks wireless outside my house.
original title: Wi - Fi Protected AccessHi dmcangus,
See the Microsoft articles below for more information on WPA wireless security.
Configure Security Wireless WPA for home networks
http://Windows.Microsoft.com/en-us/Windows-XP/help/networking/configure-WPA-wireless-security
Overview of upgrading security Wi - Fi Protected Access (WPA) in Windows XP
-
Best Configuration for optimal IO RAID parameters and ESX 3.5 vmfs volumes
Hello
We currently have ESX 3.5 update 3 installed on a HP DL585 and connected to a HP MSA 1500. ESX is installed on the server in a RAID 1 2 x 72 GB configuration. I tried to determine the best possible configuration for the VMFS partition on the MSA 1500 (or more), but it seems to be getting some mixed reviews between RAID 1, RAID 5, and RAID 10. That's why I thought I post the question and I hope that some people have recommendations. Even if the disk size and type may be the best available and we can add to write the memory cache to the MSA then let me know the following... I'm coming looking with better i/o performance overall as well as redundancy (number of readers and size is not limits so if we had better available so how would he). Assuming that VM will perform a high volume of reads/writes:
1 size Max of LUN to optimize i/o performance (I have read 250 GB but perhaps it can be more)?
2 for the LUN RAID configuration (RAID 5 or RAID 10, as well as all others who may still be better)?
3. number of disks to span as appropriate?
4. the amount of memory to install in the table itself or if anything be installed within the guest card and/or fiber ESX?
Thanks in advance
I'd say go with RAID 10
Number of disks and the size depends on the VMs that spins the discs,
Good reading this article that I found interesting and useful
http://www.miracleas.com/BAARF/RAID5_versus_RAID10.txt
If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!
-
Could some expert if you please help me to configure Oracle Gateway for DRDA.
Hi Experts,
Could you please give me the steps or delete the document to install and configure the oracle for DRDA gateway. I need to put up with the db2 database.
Platform: AIX
Database version: 11.2.0.3
I'd really appreciate it if experts will extend their assistance in this regard.
Thank youHello
To answer your questions-1. I already have a listener running on my oracle database, which is under home(/u01/app/asm/product/11.2.0.3/grid/network/admin) GI.
-You must create a new listening port for the gateway in the directory $GATEWAY_ORACLE_HOME/network/admin
-for your configuration, this looks like it should be-
/U01/app/Oracle/product/11.2.0.3/dt02/network/admin
-start the receiver of the gateway by using the executable in /u01/app/oracle/product/11.2.0.3/dt02/bin lsnrctl2. I read the Document Oracle, which has been mentioned by the experts above, however got little confused where to run scripts to create the Tables and the data dictionary support Beta project views...
-you need run the scripts in the database non-Oracle to which you are connecting.
So, if it's DB2 on zOS, then run "zos" scripts DB2 itself, if it is DB2 on Linux, Unix or Windows, then run "luw" scripts in DB2.3. is there anything that either I should suggest for DB2 guys to go he ends to make it effective.
-Make sure that they granted the necessary authorizations for such users as specified in the documentation, in particular the user that links the gateway packages.Kind regards
Mike -
HP Pavilion notebook p073TX-15: we can configure RAID 0 in HP Pavilion notebook 15-p073TX
Hello guys,.
I just wanted to know if we can configure RAID 0 in HP Pavilion notebook 15-p073TX.
Initially the laptop came with Win 8 however I changed it for Win 7 Ultimate and now I want to go back to win 8 and want to configure RAID 0 to speed up performance.
Thank you
Shuaib Ahmed
Hi @Shauibahmed,
Thank you for your response.
As RAID is not an option for you, if the previous suggestions to help improve the performance and commissioning did not help, please contact HP support for help. Please contact HP to Contact HP Supportassistance.
Good luck!
-
How can I configure raid 1?
I have a HP m9340f, and the 750 GB seagate drive that accompanies it is eventually died. Of course, I don't have any image or to clone, so now I have to re - install all my nonsense.
In diagnosing the drive, I discovered that the bios has raid capability. In fact, that's what the reader has been set on (although there was still only 1 disc). I've never used raid, so my question is, if I want to configure raid 1, so that the next time a drive dies, I have a built-in backup, what exactly do I do? I know that I need to install 2 hard drives, but as soon as I did this, raid configure automatically? I don't see any special properties in the screens of the bios for raid, except for access to the drive (ide/raid/AHCI). Would this be a good idea to use seagate disks, or cares not the bios?
Any help would be appreciated.
Hello bassman952, maybe I can offer a glimpse of the Raid arrays. Many Members here know this already, but for those who do not, it seems that your system is capable of Raid. It has the Intel G33 chipset, where specifications for this chipset can be found here. This chipset includes the Raid feature for most Raid array configurations. However, HP changed the BIOS to only supported Bay Raid0 and Raid1. A Raid0 array consist usually of 2 hard drives and recommend that be of the same manufacturer, model, capacity, speed and cache. It is possible to use different brands and other specifications of the hard drive, but it is strongly discouraged. A Raid1 array also usually consist of 2 hard drives with the same configuration as described above. All Raid arrays must be installed before all the data is stored on the table. To configure a matrix Raid on the chipset Intel, immediately after the HP Logo screen disappears, press ctrl and the I touch both and the Intel Matrix Raid Array utility will appear. You can then configure matrix Raid type and disk to be included in this table, save the configuration and exit. The table written Raid0 and bed for two drives at the same time, but with different data. This is referred to as a matrix of blocks. The Raid1 array is referred to as a network of mirrors. If one of the disks in Raid0 array were to fail, all data on both drives would be lost. The Raid1 array reads and writes the same data on two drives in the Raid array at the same time. If one of the disks were to fail, a new hard drive can be installed to replace the failed drive and the system booted and the Raid1 array will be rebuilt, which means that the data from the hard drive of existing work will be copied to the new hard disk. Depending on the capacity of the hard disk and the speed of the system, it can take a good amount of time to accomplish. After that the Raid1 array is rebuilt, the system should boot normally. Table of Raid0 is mainly used for performance while the Raid1 array is used mainly as a redundant to the first hard drive backup. If a Raid array is broken, which means that the configuration of the table is changed, all data on the hard disks will be lost, even in the Raid1 array. Can I have left some items, since I'm trying to remember this memory, but this is essentially how HP uses Raid arrays in their use of home systems. Others use Raid arrays that are different, such as Raid5 and Raid10, Raid0 + 1 and some other Raid configurations, but since we are talking about the Raid arrays on HP systems, other table Raid differences would be not useful for the discussion here.
-
Error installing Windows 7 on Precision T5400 with Configuration RAID 1
Hello I need yout help to understand why I'm not able to install Windows 7 on my Precision t5400 workstation. I get this error at the end of installation "installation of windows could not configure windows to run on a hardware on this computer."
I had set up a RAID 1 array on this workstation and I think that the problem is due to that but I'm not sure. Can someone help how to solve this problem?
GIovanni of tanks
The issue is Basic but depends on whether it is the
Optional PERC 6 / i material integrated PCI - e SATA/SAS RAID or card INTEL RST driver AHCI.
Advanced Format drives NEED F6 drivers.
Also the Raid container must be configured CTRL m and initialized before installing the operating system.
Windows 7 requires INTEL RST 9.6
Intel RST replaces Intel Matrix Storage Manager. HOWEVER you cannot update to your hearts content of 7-8-9-10 11-12 or 13 etc. As newer chipsets and drivers get the older ICH5 6 7 8 9 etc. are removed from support.
Downloadcenter.Intel.com/.../15251
Version 9.6.0.1014 maybe the max for your motherboardPCI\VEN_8086 & DEV_2682 & CC_0104 = "Intel(r) ESB2 SATA RAID"
PCI\VEN_8086 & DEV_27C3 & CC_0104 = "Intel ICH7R/DH SATA RAID.
PCI\VEN_8086 & DEV_27C6 & CC_0104 = 'Intel(r) ICH7MDH SATA RAID Controller'
PCI\VEN_8086 & DEV_2822 & CC_0104 = "Intel(r) ICH8R/ICH9R/ICH10R / / 5/3400 SATA RAID.
PCI\VEN_8086 & DEV_282A & CC_0104 = "Intel(r) ICH8M-E/ICH9M-E/5 Series SATA RAID.NEWER versions (not necessarily supported on OLD chipsets)
* Microsoft .NET Framework 3.0 or newer is required to be installed on the system so that the Intel® Rapid Storage Technology User Interface install. Note that not all Microsoft * operating
Systems have .NET 3.0 or later version installed by defaultThe error means windows can't SEE not all hard disks.
Installation of Windows Vista/7/8/10 and Windows Server 2008 for a new RAID controller
Follow these steps to configure the driver when you add the RAID controller to a system that already has Windows Server 2008 or Windows Vista installed.
- Insert the Windows DVD and reboot the system.
- Select location information, such as your country and language.
- Enter the Windows key.
- Select the drive you want to install Windows on highlighting your choice.
- If necessary, select load the driver .
NOTE: You don't need this for PERC or SAS installation because the driver is native on Windows Vista/7/8/10 The driver can be provided by CD, floppy disk, DVD, or USB flash driver.
- Navigate to the appropriate location, and then select the driver.
- Select Next if selected unallocated space corresponds to the target location.
- Select forward to create a partition for the operating system.
For more information on the minimum partition size, see the documentation for the operating system.
- Select Next.
Installation of the operating system starts on the highlighted choice (partition or unallocated volume) and the system will reboot several times.
Is not Press the to boot from the CD/DVD.
- Enter the user information and password.
- Enter the name of the computer.
- Select the level of automatic protection Windows.
- Set the time, date and time zone.
- Click Start.
Windows checks your system and prompts you to enter the password for the connection after a few minutes.
.
-
Best practices for the configuration of virtual drive on NGC
Hello
I have two C210 M2 Server with 6G of LSI MegaRAID 9261-8i card with 10 each 135 GB HDDs. When I tried the automatic selection of the RAID configuration, the system has created a virtual disk with RAID 6. My concern is that the best practice is to configure the virtual drive? Is - RAID 1 and RAID5 or all in a single drive with RAID6? Any help will be appreciated.
Thank you.
Since you've decided to have the CPU on the server apps, voice applications have specified their recommendations here.
http://docwiki.Cisco.com/wiki/Tested_Reference_Configurations_%28TRC%29
I think that your server C210 specifications might be corresponding TRC #1, where you need to have
RAID 1 - first two drives for VMware
RAID 5 - 8 hard drives within the data store for virtual machines (CUCM and CUC)
HTH
Padma
-
If the title says it all. I'm trying to set up two monitors on my HP EliteDesk 800 G1 SFF. Here is my configuration:
1. first monitor (Acer B223W) lights DisplayPort and displays things normally.
2. second monitor (HP LP2065) is on the VGA port.
The problem is that my second port monitor never gets a signal from the machine and going to sleep mode. Connect the second monitor changes my main screen at a desk empty (no icons, no taskbar, just a plain painted paper), which I believe means it tries to use my VGA monitor as main display.
However, the VGA monitor never seems to show anything. I spent my main screen on the first monitor successfully too, but is not all about him either.
Dear customer,
Welcome to the HP consumer's Support Forum!
Please try and update the video driver following, chipset and BIOS:
Intel Graphics Driver (64-bit) (International):
Intel Chipset drivers:
BIOS:
In case the problem persists, please exchange the monitor and VGA cables cables once and check.
Try and clear CMOS by following the steps below:
1. turn off the computer and unplug the power cord from the power outlet.
2. remove the access panel.
3. on the system board, hold down the CMOS button for 5 seconds.
4. replace the chassis access panel and reconnect the power cord.
5 turn on the computer and let it boot.Hope this helps, for other queries in response to the post and feel free to join us again.
* Click on the star of CONGRATULATIONS on the left to say thank you *.
Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
Thank you
GR1
Although I am an employee of HP, I speak for myself and not for HP -
When you attempt to connect to the VPN Aventail I get th e following in a "Connection error" message box: "you don't have enough privileges for the configuration of the connection properties. Contact your administrator. That this connection has worked before. I suspect a MS patch for breaking it. Any help would be appreciated.
We have solved the problem yesterday, by simply reinstalling the Aventail software.
I spoke to network administrators and nothing had changed, so it's quite strange.
anyway thanks a lot for your help Brian.
See you soon,.
Tobias
-
I need help for the upgrade of my current system.
I need help for the upgrade of my current system.
I have SBS 2008 with (Exch 2007, SQL 2005, Sharepoint, backupexec 2010 for sbs) licenses.
I want to make the larger environment using the following:
(1) apply Virtualization
(2) apply to the failover process (clustering)
"(3) the environment must support adding server terminal server, ERP server, exchange server, domain controller, backup manager.
Storage 4) that supports Raid (1 and 5)
UTM excellent 6) that supports (SSL VPN, VPN Global)
suitable backup solution 7)
(8) good antivirus for clients
my questions:
(1) can you provide me with a good design for this environment
(2) should I choose what operating system:
Microsoft datacenter or company
I know datacenter provide us the unlimited VM but needs per processor license
so if I have two Grouped servers I want to buy 4 licenses
and just 4 VMs per company license... to say that we have two servers and maintain 8 vms so wat happened if 1 goes down... How can I migrate the 4 virtual machines on the server failed to another server group... ? should I buy enterprise license?
(3) if I get the SAN storage for data... How can I save this storage... should I get another SAN?
(4) how can I upgrade SBS stad single server (windows standrad) without losing the licenses as Exch 2007, SQL 2005, sharepoint.is it a must to buy an edition full std server or there is a way to upgrade (license wise, I mean)?
(5) what about win2k8 license for VM:
lets say we have physical that has windows license so that enough to have windows for VM or should I buy windows for VM licenses?
(6) can I use backExec license for SBS with windows 2008 standard
(7) who better to virtualization AMD or INTEL
(8) hyper V or VMware?
(9) what of Microsoft data protection Manager... is this good?
(10) what virtual machine manager? What are the benefites keys
Thanks in advance
Hello AnasAI,
You can find the Server forums on TechNet support, please create a new post at the following link:
http://social.technet.Microsoft.com/forums/en/category/WindowsServer/
-
Configuring RAID 0 without on a MCP61PM-HM restore disks
I have a HP Pavilion Media Center m8300f desktop PC.
I don't have restore disks... I don't see ANY option in the bios to RAID 0 configuration...
How can I configure RAID 0 before installing Windows?
I was able to get the job by finding a bios PIRATE/MODDED Raid0/scratches.
For some reason any HP disabled raid in the bios that they provide. Is not acceptable.
-
I have my operating system installed on a single disc, and I bought two additional discs I want to implement in a Raid 0 configuration. I'm going to administrative tools > computer management > disk management > right-click on a single disc and select the new striped volume > add the second drive and fill the dialog box until I get to the part where the formatting is supposed to start. Then I am stopped by an error that says "the dynamic disks are not supported on this operating system."
Who says that hard drives, I bought are not compatible with vista interlacing or it says that vista can not the striped disks. What is the problem?
You need to configure raid 0 before installation of win, you cannot "convert" s simple drive to the part of a matrix of blocks.
In general this is not a good idea to use software raid, too a overload the CPU. If you want to raid, invest in a dedicated hardware raid card, which for a decent cost probably more than your motherboard
-
Need urgent help in the configuration of the Client VPN IPSec Site with crossed on Cisco ASA5510 - 8.2 (1).
Here is the presentation:
There are two leased lines for Internet access - a route 1.1.1.1 and 2.2.2.2, the latter being the default Standard, old East for backup.
I was able to configure the Client VPN IPSec Site
(1) with access to the outside so that the internal network (172.16.0.0/24) behind the asa
(2) with Split tunnel with simultaneous assess internal LAN and Internet on the outside.
But I was not able to make the tradiotional model Hairpinng to work in this scenario.
I followed every possible suggestions made on this subject in many topics of Discussion but still no luck. Can someone help me here please?
Here is the race-Conf with Normal Client to Site IPSec VPN configured with no access boarding:
LIMITATION: Cannot boot into any other image ios for unavoidable reasons, must use 8.2 (1)
race-conf - Site VPN Customer normal work without internet access/split tunnel
:
ASA Version 8.2 (1)
!
ciscoasa hostname
domain cisco.campus.com
enable the encrypted password xxxxxxxxxxxxxx
XXXXXXXXXXXXXX encrypted passwd
names of
!
interface GigabitEthernet0/0
nameif outside internet1
security-level 0
IP 1.1.1.1 255.255.255.240
!
interface GigabitEthernet0/1
nameif outside internet2
security-level 0
IP address 2.2.2.2 255.255.255.224
!
interface GigabitEthernet0/2
nameif dmz interface
security-level 0
IP 10.0.1.1 255.255.255.0
!
interface GigabitEthernet0/3
nameif campus-lan
security-level 0
IP 172.16.0.1 255.255.0.0
!
interface Management0/0
nameif CSC-MGMT
security-level 100
the IP 10.0.0.4 address 255.255.255.0
!
boot system Disk0: / asa821 - k8.bin
boot system Disk0: / asa843 - k8.bin
passive FTP mode
DNS server-group DefaultDNS
domain cisco.campus.com
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
object-group network cmps-lan
the object-group CSC - ip network
object-group network www-Interior
object-group network www-outside
object-group service tcp-80
object-group service udp-53
object-group service https
object-group service pop3
object-group service smtp
object-group service tcp80
object-group service http-s
object-group service pop3-110
object-group service smtp25
object-group service udp53
object-group service ssh
object-group service tcp-port
port udp-object-group service
object-group service ftp
object-group service ftp - data
object-group network csc1-ip
object-group service all-tcp-udp
access list INTERNET1-IN extended permit ip host 1.2.2.2 2.2.2.3
access-list extended SCC-OUT permit ip host 10.0.0.5 everything
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq www
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any https eq
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq ssh
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 no matter what eq ftp
list of access CAMPUS-LAN extended permitted udp 172.16.0.0 255.255.0.0 no matter what eq field
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq smtp
list of access CAMPUS-LAN extended permitted tcp 172.16.0.0 255.255.0.0 any eq pop3
access CAMPUS-wide LAN ip allowed list a whole
access-list CSC - acl note scan web and mail traffic
access-list CSC - acl extended permit tcp any any eq smtp
access-list CSC - acl extended permit tcp any any eq pop3
access-list CSC - acl note scan web and mail traffic
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq 993
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq imap4
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq 465
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq www
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq https
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq smtp
access-list extended INTERNET2-IN permit tcp any host 1.1.1.2 eq pop3
access-list extended INTERNET2-IN permit ip any host 1.1.1.2
access-list sheep extended ip 172.16.0.0 allow 255.255.0.0 172.16.0.0 255.255.0.0
access list DNS-inspect extended permit tcp any any eq field
access list DNS-inspect extended permit udp any any eq field
access-list extended capin permit ip host 172.16.1.234 all
access-list extended capin permit ip host 172.16.1.52 all
access-list extended capin permit ip any host 172.16.1.52
Capin list extended access permit ip host 172.16.0.82 172.16.0.61
Capin list extended access permit ip host 172.16.0.61 172.16.0.82
access-list extended capout permit ip host 2.2.2.2 everything
access-list extended capout permit ip any host 2.2.2.2
Access campus-lan_nat0_outbound extended ip 172.16.0.0 list allow 255.255.0.0 192.168.150.0 255.255.255.0
pager lines 24
Enable logging
debug logging in buffered memory
asdm of logging of information
Internet1-outside of MTU 1500
Internet2-outside of MTU 1500
interface-dmz MTU 1500
Campus-lan of MTU 1500
MTU 1500 CSC-MGMT
IP local pool 192.168.150.2 - 192.168.150.250 mask 255.255.255.0 vpnpool1
IP check path reverse interface internet2-outside
IP check path reverse interface interface-dmz
IP check path opposite campus-lan interface
IP check path reverse interface CSC-MGMT
no failover
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 621.bin
don't allow no asdm history
ARP timeout 14400
interface of global (internet1-outside) 1
interface of global (internet2-outside) 1
NAT (campus-lan) 0-campus-lan_nat0_outbound access list
NAT (campus-lan) 1 0.0.0.0 0.0.0.0
NAT (CSC-MGMT) 1 10.0.0.5 255.255.255.255
static (CSC-MGMT, internet2-outside) 2.2.2.3 10.0.0.5 netmask 255.255.255.255
Access-group INTERNET2-IN interface internet1-outside
group-access INTERNET1-IN interface internet2-outside
group-access CAMPUS-LAN in campus-lan interface
CSC-OUT access-group in SCC-MGMT interface
Internet2-outside route 0.0.0.0 0.0.0.0 2.2.2.5 1
Route internet1-outside 0.0.0.0 0.0.0.0 1.1.1.5 2
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
AAA authentication enable LOCAL console
Enable http server
http 10.0.0.2 255.255.255.255 CSC-MGMT
http 10.0.0.8 255.255.255.255 CSC-MGMT
HTTP 1.2.2.2 255.255.255.255 internet2-outside
HTTP 1.2.2.2 255.255.255.255 internet1-outside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs set group5
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
Crypto map internet2-outside_map 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
crypto internet2-outside_map outside internet2 network interface card
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
Crypto ca certificate chain _SmartCallHome_ServerCA
certificate ca xyzxyzxyzyxzxyzxyzxyzxxyzyxzyxzy
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as a67a897as
a67a897as a67a897as a67a897as a67a897as a67a897as
quit smoking
ISAKMP crypto enable internet2-outside
crypto ISAKMP policy 10
preshared authentication
aes encryption
md5 hash
Group 2
life 86400
Telnet 10.0.0.2 255.255.255.255 CSC-MGMT
Telnet 10.0.0.8 255.255.255.255 CSC-MGMT
Telnet timeout 5
SSH 1.2.3.3 255.255.255.240 internet1-outside
SSH 1.2.2.2 255.255.255.255 internet1-outside
SSH 1.2.2.2 255.255.255.255 internet2-outside
SSH timeout 5
Console timeout 0
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal VPN_TG_1 group policy
VPN_TG_1 group policy attributes
Protocol-tunnel-VPN IPSec
username ssochelpdesk encrypted password privilege 15 xxxxxxxxxxxxxx
privilege of encrypted password username administrator 15 xxxxxxxxxxxxxx
username vpnuser1 encrypted password privilege 0 xxxxxxxxxxxxxx
username vpnuser1 attributes
VPN-group-policy VPN_TG_1
type tunnel-group VPN_TG_1 remote access
attributes global-tunnel-group VPN_TG_1
address vpnpool1 pool
Group Policy - by default-VPN_TG_1
IPSec-attributes tunnel-group VPN_TG_1
pre-shared-key *.
!
class-map cmap-DNS
matches the access list DNS-inspect
CCS-class class-map
corresponds to the CSC - acl access list
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
CCS category
CSC help
cmap-DNS class
inspect the preset_dns_map dns
!
global service-policy global_policy
context of prompt hostname
Cryptochecksum: y0y0y0y0y0y0y0y0y0y0y0y0y0y
: end
Adding dynamic NAT for 192.168.150.0/24 on the external interface works, or works the sysopt connection permit VPN
Please tell what to do here, to pin all of the traffic Internet from VPN Clients.
That is, that I need clients connected via VPN tunnel, when connected to the internet, should have their addresses IP NAT'ted against the address of outside internet2 network 2.2.2.2 interface, as it happens for the customers of Campus (172.16.0.0/16)
I am well aware of all involved in here, so please be elaborative in your answers. Please let me know if you need more information about this configuration to respond to my request.
Thank you & best regards
MAXS
Hello
If possible, I'd like to see that a TCP connection attempt (e.g. http://www.google.com) in the ASDM logging of the VPN Client when you set up the dynamic NAT for the VPN Pool also.
I'll try also the command "packet - trace" on the SAA, while the VPN Client is connected to the ASA.
The command format is
packet-tracer intput tcp
That should tell what the SAA for this kind of package entering its "input" interface
Still can not see something wrong with the configuration (other than the statement of "nat" missing Dynamics PAT)
-Jouni
Maybe you are looking for
-
Portege 3010 ct: Question about drivers USB under W2k
Can someone point me in the direction of the Windows 2000 drivers for the CT 3010 Portege USB port? I can only find Win 95 and 98, and they do not seem to work. Thank you very much Adam
-
HP ENVY h8 - 1520t: set the bios for the site with riders
I need jumper to clear the BIOS settings in the CMOS. Does not start to any menu or menu setup after getting out of battery and replacement. Thank you Chet wood Product number: C9D47AV #ABA HP ENVY h8 - 1520t CTO desktop PCWin 8 64-bitMicroprocessor
-
Problems with dual monitor: VGA is out only work
I have a dual monitor card galaxy geforce gf430 who worked on Sunday night before putting the computer to sleep. When I came back Wednesday on the side of the hdmi/vga/dvi vga worked the only possible output. After having checked all the settings and
-
images for wallpaper panoramic beaches
Does anyone know where Microsoft got the images for the Windows 7 scenic beaches wallpaper?
-
Phone smart BlackBerry Z10's secure network. (hard locked)
I bought a blackberry through eBay z10. And it's an any phone. My brother has entered unfortunately bad MEP code 10 times. And now it is hard locked. No Sim card doesn't work. What do I showed this phone for each and every service centers to Indore (