HP Pavilion notebook p073TX-15: we can configure RAID 0 in HP Pavilion notebook 15-p073TX

Similar Questions

• Where the smart wizard dowload can configure for OSX (El Capitan)

  Can you tell me where to download smart Assistant can configure for Macintosh OSX?

  Hello DaDirk,

  Welcome to the community!

  I'm sorry, but currently there is no Smart Wizard, Smart Control Center and Prosafe Plus utilities available that are compatible with Mac systems.

  Alternatively, you can configure the switch via user interface using its default LAN IP address on a web browser.

  Kind regards

• How can I configure raid 1?

  I have a HP m9340f, and the 750 GB seagate drive that accompanies it is eventually died. Of course, I don't have any image or to clone, so now I have to re - install all my nonsense.

  In diagnosing the drive, I discovered that the bios has raid capability. In fact, that's what the reader has been set on (although there was still only 1 disc). I've never used raid, so my question is, if I want to configure raid 1, so that the next time a drive dies, I have a built-in backup, what exactly do I do? I know that I need to install 2 hard drives, but as soon as I did this, raid configure automatically? I don't see any special properties in the screens of the bios for raid, except for access to the drive (ide/raid/AHCI). Would this be a good idea to use seagate disks, or cares not the bios?

  Any help would be appreciated.

  Hello bassman952, maybe I can offer a glimpse of the Raid arrays. Many Members here know this already, but for those who do not, it seems that your system is capable of Raid. It has the Intel G33 chipset, where specifications for this chipset can be found here. This chipset includes the Raid feature for most Raid array configurations. However, HP changed the BIOS to only supported Bay Raid0 and Raid1. A Raid0 array consist usually of 2 hard drives and recommend that be of the same manufacturer, model, capacity, speed and cache. It is possible to use different brands and other specifications of the hard drive, but it is strongly discouraged. A Raid1 array also usually consist of 2 hard drives with the same configuration as described above. All Raid arrays must be installed before all the data is stored on the table.  To configure a matrix Raid on the chipset Intel, immediately after the HP Logo screen disappears, press ctrl and the I touch both and the Intel Matrix Raid Array utility will appear. You can then configure matrix Raid type and disk to be included in this table, save the configuration and exit. The table written Raid0 and bed for two drives at the same time, but with different data. This is referred to as a matrix of blocks. The Raid1 array is referred to as a network of mirrors. If one of the disks in Raid0 array were to fail, all data on both drives would be lost. The Raid1 array reads and writes the same data on two drives in the Raid array at the same time. If one of the disks were to fail, a new hard drive can be installed to replace the failed drive and the system booted and the Raid1 array will be rebuilt, which means that the data from the hard drive of existing work will be copied to the new hard disk. Depending on the capacity of the hard disk and the speed of the system, it can take a good amount of time to accomplish. After that the Raid1 array is rebuilt, the system should boot normally. Table of Raid0 is mainly used for performance while the Raid1 array is used mainly as a redundant to the first hard drive backup. If a Raid array is broken, which means that the configuration of the table is changed, all data on the hard disks will be lost, even in the Raid1 array. Can I have left some items, since I'm trying to remember this memory, but this is essentially how HP uses Raid arrays in their use of home systems. Others use Raid arrays that are different, such as Raid5 and Raid10, Raid0 + 1 and some other Raid configurations, but since we are talking about the Raid arrays on HP systems, other table Raid differences would be not useful for the discussion here.

• Error events arrives 45 minutes late, where I can configure this setting?

  Hello community, we use BBPE 4.3 to monitor our environment. Unfortunately, only error events are sent by my DOWNLOAD 45 minutes late, and then every 15 minutes, not so good.

  Looking at the documentation I have seen the bbpagedelay, but with this setting I can only say to the DOWNLOAD how much time waiting for a notification of an error of one individual to another, but where I can configure the pager to send welcome me the first notification instantly?

  Hope to be fairly clear in the description of my problem.

  Best regards

  Gerardo

  make the recipient in the file bbwarnrules.cfg like this look?

  *;; *;; *;*;*; [email protected]: ~ 45-15

  or

  *;; *;; *;*;*; [email protected]: ~ 45

  If so, change of

  *;; *;; *;*;*; [email protected]: 15

  or

  *;; *;; *;*;*; [email protected]

  the ~ XX tells BB to start notifying * only * if the event has been produced for more than XX minutes.

  It's the only reason I see for now.

• You can configure LACP in a stack with SG500

  Hi guys,.

  I'm looking to buy 2 x SG500-48 switches with the stacking cables and connect them in a stack ring topology.

  My reason for wanting this is so we can configure connections LACP of our servers in hyper-v to 2 stacked switches so the we have a redundant network connection if one of the switches is to fail. You can configure LACP links on stacked SG - 500 switches to be in the same group/link?

  Can of course

  -Tom
  Please mark replied messages useful
  http://blogs.Cisco.com/smallbusiness/

• When I download the Microsoft digital media pro keyboard for Windows 7, I can configure the Dell are no longer wired mouse.

  Original title: Digital Media Pro Software for Windows 7 & mouse

  I have recently upgraded to Windows 7, 64 bit.  I got a Microsoft digital media pro keyboard and a Dell wired mouse.  When I download the driver of keyboard for 7, I can configure is no longer my mouse.  The system seems to think I have a Microsoft mouse and sends me to the page of the keyboard layout.  Unfortunately, there is no option of configuration of the mouse on this page, and I can't change the functions of the buttons.  Since I use
  left mouse, it's a pain.  I had to uninstall the keyboard software.  Any suggestions?

  Go to the download site and download IntelliType 8.2 64-bit for Windows 7

  It's only for the keyboard.

  Do not use the mouse and keyboard Center 2.1 64-bit

  http://www.Microsoft.com/hardware/en-us/d/digital-media-Pro-keyboard

• Can anyone tell how I can configure the desktop as the default screen that appears when I connect to Win 8?

  Original title: Desktop

  Can anyone tell how I can configure the desktop as the default screen that appears when I connect to Win 8 rather than having to go from the first layer redundant 'start-up '.

  In fact, if anyone can tell if there's a free windback to an earlier version of Windows (7) who has not all layers unnecessary and icons, I would be really grateful

  Your best bet is to switch to 8.1, that allows you to boot directly to the desktop, and then use a menu like debut8 to replace the old Start Menu and hide the side of the metro.

  If your computer comes with Win Pro 8, you may be able to demotion, otherwise, you will need to buy 7. Before you buy 7, I would recommend go to the computer manufacturer's website and see if there are any Windows 7 drivers for your computer. You may lose certain functions - sound, network, video full resolution - if there is no driver.

  The first option is easy and allows you to keep the improvements in performance and safety 8.

• I can configure Adobe Reader so that every time I open a pdf file I Don t have to click every time hide tool Meny?

  I can configure Adobe Reader so that every time I open a pdf file I Don t have to click every time hide tool Meny?

  Hi ralfr78469201,

  To close the tool manually pane first, then navigate to the Edit-> Preferences-> Documents menu-> uncheck "pane open tools for each document.

  Click OK to confirm the changes and restart the application.

  Let me know if it solves your problem.

  Kind regards
  Nicos

• Configuring RAID 0 without on a MCP61PM-HM restore disks

  I have a HP Pavilion Media Center m8300f desktop PC.

  I don't have restore disks... I don't see ANY option in the bios to RAID 0 configuration...

  How can I configure RAID 0 before installing Windows?

  I was able to get the job by finding a bios PIRATE/MODDED Raid0/scratches.

  For some reason any HP disabled raid in the bios that they provide.  Is not acceptable.

• Error "the dynamic disks are not supported by this operating system." what configuration Raid 0 (striped) readers.

  I have my operating system installed on a single disc, and I bought two additional discs I want to implement in a Raid 0 configuration. I'm going to administrative tools > computer management > disk management > right-click on a single disc and select the new striped volume > add the second drive and fill the dialog box until I get to the part where the formatting is supposed to start. Then I am stopped by an error that says "the dynamic disks are not supported on this operating system."

  Who says that hard drives, I bought are not compatible with vista interlacing or it says that vista can not the striped disks. What is the problem?

  You need to configure raid 0 before installation of win, you cannot "convert" s simple drive to the part of a matrix of blocks.

  In general this is not a good idea to use software raid, too a overload the CPU. If you want to raid, invest in a dedicated hardware raid card, which for a decent cost probably more than your motherboard

• Configurations RAID P70 delayed?

  I configured a P70 RAID1 with two 512 GB SSD of PCIeNVMe on 12/23. The date of planned construction was delayed several times, the latest of 29/01/16. Has anyone received a P70 with still configured RAID?

  The initial order was placed on 12/23. The system was supposed to ship 1/9, but back push twice. 1/27 is now the new date. I'll check tomorrow because we are 1 day behind manufacturing in China.

• HELP for re - configure RAID

  I have a windows 8/4th GEN Envy 17 jo29nr. What they do not mention in the description of the form, it's that it comes with a 25 GB SSD for caching. In addition, the standard drive is a disk of 1 TB 5400 RPM / min. I removed the RAID to install an SSD, but now, I want to just put a 750 GB drive at 7200 RPM and reconfigure the RAID for the use of the Intel memory smart caching. But when I go to set up a RAID 0 volume, it will only allow me to (approximately) 44GB, twice the size of the available mSATA SSD. There is literally no option that will change that. Any help would be appreciated big time.

  Heretikos,

  When configuring RAID 0 with 2 hard disks of different size it always diminishes the largest room of the same size as the smallest for interlacing.

  The smallest mSATA SSD in the system is to set up the Cache and no RAID 0 in the Intel rapid storage technology. It's original installation on your laptop.

  Let me know if your still following this thread I'd like to talk with you more about this.

• Cannot configure RAID 10

  UCS C220 M3S with 2008 M - 8i SAS raid PCI mezzanine card

  We just got a new server wiith this controller when trying to configure it with four (04) disks to a Raid 10 SAS... OOHH no RAID 10 could choose.

  I found a paper that says that controllers RAID 10 support:

  Link:

  http://www.google.com.pe/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&ved=0CDkQFjAA&url=http%3A%2F%2Fwww.cisco.com%2Fen%2FUS%2Fdocs%2Funified_computing%2Fucs%2Fc%2Fhw%2FC220%2Finstall%2Fraid.pdf&ei=_JmDUt7QEZPesASeqYLwBg&usg=AFQjCNEDExxiAHNdoxdwcD6VcVYk-ZL_LA&bvm=bv.56343320,d.cWc

  Please know what happends.

  Thank you.

  William Z.

  Hi William,.

  How do you set up the raid volume? You use the WebBios utility?

  If you use the WebBios utility you must make sure that you create two spans of two disks of each to be able to see raid 10 in option.  See the document below, it will show you how to configure raid 10 beginning on page 76.

  http://www.LSI.com/downloads/public/MegaRAID%20Common%20Files/51530-00_RevF.PDF

• Is there a way I can configure MSTSC.exe to connect to an RDP but then require a password to return or to terminate the connection?

  I have implemented a set of instances of the virtual machine on the certification exams.  They have limited internet and program access.  To achieve these machines, we use MSTSC.exe or RDP another access type.  The problem is that people can only minimize MSTSC and go to their House Office to access the internet or anything else really.  It is a major security breach for cheating.  I need a way to connect to my secured through RDP still test environment restrict access to their own desktop!  The challenge that I know, but everyone has been able to configure MSTSC or any other RDP program to require a password or minimize the output?  Other solutions are of course welcome, thank you.

  Hello

  You try to view your feed in these links for assitance:

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  It will be useful.

• FIPS. You can configure an ASA in accordance with FIPS to reject all connections non - FIPS Anyconnect

  Hi dude, is he not automagically to refuse any connection Anyconnect an ASA compliant FIPS if the Anyconnect client is non-FIPS compatible?

  Any help, ideas or thoughts are appreciated because I can't seem to find something to think about as you can.

  Kind regards

  Paul.

  Hi Paul,.

  By default, the ASA specifies the non-compliant FIPS RC4-SHA1 for the connection. To comply with FIPS, you must make sure that a compatible encryption FIPS is the first specified in the list of SSL encryption. Otherwise, the DTLS connection fails. In addition, we recommend that you remove all non-FIPS list ciphers in order to ensure that the connection failed does not occur.

  In ASDM, go to Setup > remote access VPN > advanced > settings SSL to specify the types of SSL encryption. In the encryption area, move a FIPS compatible encryption at the first position in the list.

  If you use CLI, use the encryption ssl from the global configuration mode command to order the list.

  Kind regards

  NGO