Help forced

Similar Questions

• HELP: Force setting RTL layout

  Today I activated the Force RTL layout setting in options of developer and now the systemui crashes constantly. I tried to get into bootloader and using the options to the Factory mode and recovery, but nothing has worked. What is the solution to this? Other people have had a replacement from Verizon, but I'm not in the United States, so this isn't an option for me. I need a solution to this ASAP

  First of all the shit on bootloader not be unlocked and now I came across this problem. Using the factory option did nothing, go to the recovery showed '' no command. ''
  After many attempts, you try to run the command adb and trying to get just a data connection, so I was able to back up my data, I eventually went back to recovery mode. Press all the buttons and it has begun to show recovery options. A fact clear data / factory reset and it clear memory internal too not just the apps. Phone started working again.
  Really angry with this locked bootloader shit and no access to his own phone and data user in case it gets stuck. It is the latest phone from Verizon for me.

• I've just updated to 10.0.2 and now I can't attach a photo to my messages

  I've been enjoying my I Phone 6plus, but when it updated 2 days ago, I can't press the camera next to the message when I want to join or take a picture...

  Hey there, bamaju!

  Thank you for using communities of Apple Support.

  I see that after updating to iOS 10, you are now unable to push the button of the camera next to the message when you want to join or take a picture. I take a lot of photos on my iPhone, so I guess that you are ready to get this camera problem solved. I'm more than happy to help you with this.

  First of all, I would like to check to see if there is no consistent restriction that prevents you from using the camera. Tap Settings > general > Restrictions > enter the password (if any) > Make sure camera is on (green) under allow.

  If there is no restriction, forcing please close the camera and then reopen. You can force close by double-clicking the home button and then drag upward on the camera application to close. This article will help: forcing a nearby app on your iPhone, iPad or iPod touch

  And finally, please give your iPhone a fresh reboot: restart your iPad, iPhone or iPod touch

  Once you have completed these steps, please re-test the camera app and let us know if you still have the same problem.

  Have an amazing day!

• 10 killed my iPhone iOS update

  I just did the update to iOS 10 on my iPhone 6 s. After that installation is finished my screen stayed slightly blue and it has been like that for an hour. Is this the end of my iPhone? Can anyone advice what will I do? This really saddens me.

  Restart your iPhone.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  If this does not help, forcing the reboot.

  Press and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

• Apple Watch stuck

  my watch is stuck on the screen clear all.  Any ideas to make it take off?

  Hello

  Try to restart or if it does not help, force the reboot - your watch:

  -Restart: Press and hold the side button until you see the cursor off the power; slide it to turn off; Hold down the side button until you see the logo.

  -Force the reboot: hold down the side button and the digital Crown for about 10 seconds, until you see the logo.

• External Usb Audio Card Popping and cracking sound with Satellite L500

  Greetings,

  My name is Boyan and I am from Bulgaria, and a year ago, I bought a laptop satellite l500 series (I can't tell which is exactly the model at the moment because my computer is not currently with me and my user manual, the only thing that is said is that it is for L505/L500/L500D / L505D.) But from memory I think it was the Satellite L500D-ST5506 which is currently not at my dispossal, because I gave him for repairs for the same problem that I say down below)

  The problem with my laptop, is that when I plug in a Usb Audio card in my laptop I have a crackling sound during live sound is played hollow map external speakers/headphones. I tried several sound cards and speakers/headpohnes which work perfectly well with other computers, including laptops, but the problem continues even when I use an external sound card to connect to the laptop not appearing in my laptop speakers/headphones.

  The problem is important only when the signal passes through an external audio card and it is very disruptive since I use my laptop to create music and I bought a sound card expenssive and speakers that can not be used with the laptop. I tried 3 types of sound cards:

  M-Audio Fast Track Pro

  BEHRINGER uca 222

  and a simple 3d audio usb audio card external and the problem persists.

  At first, I thought that the problem is software and I should install the new drivers, windows 7 automatically recognizes and installs the drivers for the devices and I have its in (but with the cracks and educated) so I tried using the official drivers sold for me with the sound cards, but without success: the problem was still there. I tried to find the new drivers of the sound cards on long official distributors and I downloaded it but the problem was still there. Then I tried to delete all the audio drivers on my computer and just use the external sound card for sound but this eighter helps force. I updated my drivers for my sound card build - in as well but again - no luck.

  After substantial thing frist I did when (2 weeks after I bought the laptop) was to contact the store where I bought my audio card and they said that the problem may be so eighter latency or high voltage of the laptop they advised me to try to reduce the latency of the parameters or to try and see if the problem persists if only my laptop running on battery power. I tried two things, and they did not help. Audio cards worked without problems on all the other computers I tried them but me. So they told me that the problem could not be audio cards.

  What I then was that I gave my laptop for the Distributor official of toshiba in my country so that they can solve my problem. What they told me, is that a problem with the version of windows which was preinstalled on my laptop and it was not compitable with the sound cards (which was bizzar survey because I tried them on the same windows and they worked, only on other computers). So I'm back from my laptop and passed under my Windows 7 Home Premium 64 bit operating system to Windows 7 Ultimate edition 64-bit and Windows 7 32-bit Ultimate edition on all versions, that's the problem: whenever I activate a low of passes of audio signal and Audio Usb card he heard cracks and educated. I even tried isntalling Windows XP, but the laptop want spesific SATA drivers for the Windows XP installation which although I found - they helped me install XP and I didn't go the BIOS of the computer to try to put a new and so on, because I'm not sure about that and I could lose my warranty so I said in the official repair shop for Toshiba in my city to put XP on my computer to solve the problem but they can't because they are not liscened to work with software that isn't a recipt for its purchase (which I did not because I bought my windows xp a long time ago and I lost the recipt)

  I gave her to get it repaired for the second time by telling them that the change of my operating system has not solved my problem and what they were doing was they changed the motherboard on my computer, indicating that the build in the device realtek audio on my computer is good enough to support a card usb audio or it may be broken and they change the whole motherboard because the generation of card is stuck, so they did it, but my problem has not been resolved. They told me that although I use and map external audio usb signal always going trough my only internal and I have to disable so I tried to disable this trough Control Panel, but this does not solve the problem and I don't have a BIOS option to disable my sound card build-in. Another thing I thought that maybe the problem is that two audio cards do not work on the same bitrate and Hertz so I put both cards to 16 bit 48000 Hz DVD quality (also tried the other options on the 3 cards that I have) but it's the same thing.

  They told me that it's just my luck and the construction of the sound card does not support this external sound cards and I would had been more careful when they choose to my laptop first.

  I couldn't accept this awnser for several reasons:

  (1) this sound card works on a lower version of windows and are supported by many older models of Realtek and a lot of old computers (one of them bought 2000! and my laptop is of 2010!)

  (2) the guys who were the apperantley of fixing problem don't go so deeply into my problem because they didn't know that in fact the problem was that only they knew that there is a problem with the audio card and the computer interact with them, they knew not that it cracks during the direct play the external audio card.

  (3) I can't accept the fact that Toshiba is manufacturing of models with maps audio chipset that cannot support a simple external Usb Audio card. It is totally unacceptable to me, and I sincerely hope that this is not the case!

  (4) they have tried my audiocards on another laptop of the same series, claiming that they have not at their dispossal at the moment so I'll go tomorrow at a local store and try the sound cards by myself on the same computer in the store.

  What I have now, it was that I gave my laptop for repair requesting a statement of the problem in wrtting with details of the problem so I can go to court or ask for a new laptop, but I'll be charged with little money because according to them there is no problem in the laptop and the problem is that my external sound cards are not compitable with the build in house chipset sound card. If I give my laptop for repair, and there is no hardware problem, I'll have to pay the money. I will do this, but I'm now crazy, because that does not solve my problem and I am wasting time and money.

  What I ask here is, if you can not help me solve my problem and advice me what to do to fix it, please give me the details of the chipset built in Driver sound card on my motherboard, so I can check if it is compitable with my external sound cards and contact the dealers of the sound card to ask them their opinion. Or if you can tell me what it is compitable with and what not, that would be great. Personally, I think this laptop should have no problem at all with a simple external usb running sound card, but I ask you, if you know something more about it.

  If a problem with the build in chipset then Toshiba is manufacturing (or at least sell) audiocards which are not in a normal standart but unfortunately I can not do nothing except complain to Toshiba and never treat whith such productgs more. Otherwise, if this is not true, then my laptop has a problem that is different and I have to go to court with the mans for mounting repair is not my laptop or do not give a new one when I guarantee will not fault of Toshiba and it will be in a way solve my problem.

  I hope that you understand how important it is for me and I hope I have fix the problem as soon as possible.

  P.S

  I want to say that I am familiar with grammar mistakes, that I did in the text below, and I would ask your excuses that I'm not a native speaker of English.

  Hi, I would just say that I had a similar failure although I wouldn't be surprised if she causing of yours, but you never have knowledge, my fault was the lid of my laptop [9 months], it contains the mic and when the lid has been in a certain angle cracks could be heard worse when I got my external sound card all the time it happened, luck, PS, it's a defective membrane [lid to the body] easily missed by engineer because he was the same angle you English is very good

  Post edited by: sido1

• display cable

  MY Apple Watch more than four hours shut off and on screen display to show green with the charger cable

  and I can't turn on

  What should you do?

  Hello

  When you reload your watch, check that:

  • All the plastic film was removed from both ends and both sides of the cable support (consult closely on the head of the charger).

  

  • On the back of your watch and the head of the charge cable are clean and dry (clean with a lint cloth and try again).
  • The Chief charge is directly aligned with the back of the watch, with the curved side touch fully (some stands watch may hinder this).
  • You use only the genuine magnetic Apple Charging Cable.
  • If you reload your watch by plugging into a power outlet, try using different maps of the following:
    • The real Apple USB Power Adapter that came with the watch, or;
    • A true 5W Apple (iPhone) or 12W (iPad) USB power adapter, or;
    • Power adapter certified by Apple (MFi) third 5W or module of magnetic charge.
  • If loading via USB, make sure you use a USB 2.0 or 3.0 port, the computer remains turned on and awake, and the cable is plugged directly into the computer (not on, for example, an external keyboard).
  • In normal operation, the load should take up to 2.5 hours.

  More information:

  Check your battery and load your Apple Watch - Apple Support

  After leaving time for your watch load, try removing the charger and restart or if it does not help, force its restart:

  -Restart: press and hold the side button until you see the cursor off the power, then drag to turn off (wait until it does), then hold down the side button until you see the logo.

  -Force the reboot: hold down the side button and the digital Crown for at least 10 seconds, until you see the logo.

  If you still have problems, contact the Apple Support (mail service may be available) or make a Genius Bar reservation in order to have your watch and/or verified under guarantee of power accessories:

  https://www.Apple.com/support/watch/contact/

• Apple Watch does not a Ding noise when you plug in the charger

  Recently my watch Sport Apple stopped making noise "ding" when I connect the charger it. This is happened after I changed the bands and noticed two green lights on the back of the watch as I turn off the watch. I checked the volume on both the watch and the app on my iPhone 6 Plus and they are correct. Has anyone experience this problem?

  Hello

  Try to restart or if it does not help, force the reboot - your watch:

  -Restart: Press and hold the side button until you see the cursor off the power; slide it to turn off; Hold down the side button until you see the logo.

  -Force the reboot: hold down the side button and the digital Crown for about 10 seconds, until you see the logo.

• How can I fix bad drivers?

  The BSOD keeps appearing again and again. Nothng could help me to enter my laptoop, same syestem restore help force... I was able to boot from safe mode as well. I therefore had to back up all my files and opt for the backup of dell and restore my pc. Now, my laptop works but keeps stopping still and always help... I don't know how to find the faulty drivers. I want to say that I never found an exclamatory mark or whatever it is next to a driver. 0 × 0000006b is an error that keeps coming back. Please help me.

  Visit the Dell Web site and look for updates for your drivers.

  You can download BlueScreenView to see that a summary of all the bug checks that you have found.

  http://NirSoft.NET/utils/blue_screen_view.html

  0x6B bug control is more likely to be caused by a bad disk as a pilot. You must run Dell diagnostics that it looks more like a hardware error.

• [html5 canvas] F12 'publish and preview' does not update creation has changed.

  For some reason any my overview of the banner stopped to update. It just loads address http://127.0.0.1 (...) with the created html file, but his standoff with previous animation. Opening manually creating the folder will show the updated version. How to fix this? Im kinda used to F12 previews rapid changes. Looks like the CC Flash is updated from a single file but another opening for preview... Bug?
  

  Possible reasons are that several times I'm using the .fla previous files from previous campaigns to get rid of the superfluous to recreate whats constant across all campaigns.

  P. S.

  I'm using the setting "do not overwrite html file" (not lose changed the html file, but only change the javascript animation), and he made during the last handful of projects without problem. It's new.

  Yes, I tryied to check 'replace the hmlt file' - no difference.

  Yes, I tryied to update the file open from localhost address CC flash opens the preview with - no difference.

  Yes, I tryied to restart Flash and even generate fees html, js, etc.

  Hello

  The updated Flash CC 2015 was on July 2015 and there is no update don't post that. We suspect the recent updates of the browser may have caused this problem. We are investigating it. At the same time if he please clear your browser cache and force to refresh your browser to get an updated overview.

  PS:

  CTRL + F5 - Win / Cmd + Shift + R - Mac can help force them to update some of the browsers

  Thank you!

  Mohan

• Custom in the SOAP header values

  Hi all
  I use OSB to do an HTTP post to a URL. I want to add SOAP headers custom in my message that I send.
  The SOAP header looks like this. Is it possible to insert these items before making the post? I tried to assign the value to the variable of routing header, legends of service but that can help force. I couldn't get a lot of information from the documents either. Is this possible with OSB?
  
  < soapenv:Header >
  < ocp:DeliveryInformation xmlns:ocp = "http://www.example.com/ocp" >
  < ocp:DocumentType > COSTCOLLECTION < / ocp:DocumentType >
  < ocp:TrackingIdentifier indicator 'messageId' = > 4741E9E0E6CB2FFCE10000000ACC033E < / ocp:TrackingIdentifier >
  < ocp:ReceiverIdentifier identifierType = "DUNSNumber" > 200103377 < / ocp:ReceiverIdentifier >
  < ocp:SenderIdentifier = "DUNSNumber" > 999999999 identifierType < / ocp:SenderIdentifier >
  < / ocp:DeliveryInformation >
  < / soapenv:Header >
  
  Thanks in advance.

  It is certainly possible and addition of xml fragment at $header is the right way to do it. I think you're on the right track. Actually, what is your problem? What you get on business? Don't forget that you can always turn to see the data via message tracking services.

• Editing and guidance - symbol symbol moves during editing

  This issue has slowed my work as an illustrator for a while, so I thought I would ask for advice.

  I have a symbol in my document - for example, a set of tabs for a Web site interface.

  When I make changes to a symbol which give rise to new dimensions (changing the height of the tabs of 40px to 50px), this translates all instances of that symbol to move on the Web. In this example, the symbol to move upwards by 5px (half of the difference between the heights of old and new). I then return each instance of that symbol in his planned place, which takes time.

  I was wondering if the orientation "Check Flash" widget that appears in the dialog box creation symbol would force the symbol to align at a given location, but he seems to have no effect on the symbol inside the Illustrator. The symbol remains permanently aligned to its centerpoint origin, regardless of subsequent changes and cannot be done to align on anywhere other than this central point. It would really help force the alignment to top left, for example.

  Any suggestions?

  In the symbol's registration point CS5 works also inside Illustrator. But not in previous versions

• IPhoto on the external hard drive will not launch despite the force quit and relaunch several times. Can someone help me?

  I have a MacBook from 2008. 4 years ago I moved my iPhoto on an external hard drive. I have thousands if photos on it. IPhoto on the external hard drive will not launch despite the force quit and relaunch several times. Can someone help me?

  < re-titled by host >

  I moved my iPhoto on an external hard drive.

  Did you move the iPhoto library for the external hard drive or the iPhoto application, or both?

  How is formatted the external hard drive? Is the file system on the drive Mac OS extended (journaled) or other system files?  Is the drive directly connected by USB or similar, or is it a SIN?

  IPhoto on the external hard drive will not launch despite the force quit and relaunch several times.

  I don't understand - if you force quit smoking, launches the application, or you can not force it quit?

  IPhoto is suspended without doing anything, when you launch?

  What version of iPhoto does? And what version of Mac OS X?

• In Yahoo Mail, when you compose an email I get a Panel "asking to leave this page. It does not matter that I choose to stay or leave, the Panel will appear again... and again... the only way is to force enough Firefox and start all over... help please...

  In Yahoo Mail, when you compose an email I get a Panel "asking to leave this page. It does not matter that I choose to stay or leave, the Panel will appear again... and again... the only way is to force enough Firefox and start all over... help please...

  Some extensions or toolbars can add such a report.
  
  It can also be part of the code on a page to prevent dataloss if you began to type text (composing a new mail) and you try to close this tab.
  
  You should be able to close this report and close the active tab.

  What I posted above is applicable to all platforms, including Mac.

• With the help of Yosemite 10.10.5 and safari will not leave for me to restart. Have you tried all the option force quit I know? Any suggestions?

  I can't open or close safari when I try to quit he said its opening, but when I try to use it - it is not opening or answer. Safari is not rich in the dock as it should be when opened can not restart normally as safari is open. Force quit won't go beyond that. I'm stuck. Help!

  If forced to leave in the Apple menu doesn't do nothing I guess you will have to hard reboot: press and hold the power switch up to the farm of Mac down, gives him a minute or two for the disc to spin down and then starts normally with the power button.

  Do you think day as Backup just in case the problem is a sign of something bigger than just a glitch in Safari?