Help get the screensaver to work

Similar Questions

• Win 7 - impossible to get the screensaver to work

  Windows 7 works very well so far, but I can't make the screen saver turns on with or without putting a time intreval.  Even when I select the option for the login screen to display when the screen saver is cut... usually not work either.

  I set and reset the screen saver mode in the section 'Customize' to prevail, any ideas?

  the information provided, you are using a 64-bit machine x,

  have you downloaded the windows7 x64bit version
  also when you burned the iso file to a disc did you have burning program check you the disk

  as I know that its possible to have defective sectors on the disks.

  so its worth it to take a little extra time and do check Fujitsu Siemens MS-6567V2 2.0 Board by your burning program: clock Bus Micro Star MS-6567V2 2.0: 133 megahertz BIOS: American Megatrends Inc. 07.00 T 06/04/02 2.40 gigahertz Intel Pentium 4 8 kilobyte primary memory secondary memory of the 512 KB of cache cache of 512 megabytes installed memory 1024 megabytes installed a Slot memory ' 0' has 512 MB Slot ' 1' has 256 MB Slot ' 2' has 256 MB Slot '3' is empty Standard VGA graphics [graphics card] generic PnP monitor (15.7 "live, June 2004) NVIDIA nForce (TM) MIDI UART Realtek AC 97 Audio unsupported Standard Game Port PCI CX11252 - 11 Modem IC Soft more IP100A 10/100 Fast Ethernet adapter Dhcp Server: none responded Microsoft 6to4 Adapter Microsoft ISATAP Adapter Microsoft ISATAP Adapter #2 Realtek RTL8139/810 x Family Fast Ethernet NIC courtesy of the GeForce4 http://www.belarc.com/free_download.html MX 440 - SE AGP 8 X Fill Rate: triangles per second: memory bandwidth: Maximum memory: reserve 1.1 billion Texels/s 34

• Bought Lightroom CC for 2 devices.  One installed fine but can not get the LIBRARY to work on the 2nd unit.  2nd camera, it is the menu bar, but nothing other than a gray screen, 1 device has all the tools.  If anyone can help.

  Bought Lightroom CC for 2 devices.  One installed fine but can not get the LIBRARY to work on the 2nd unit.  2nd camera, it is the menu bar, but nothing other than a gray screen, 1 device has all the tools.  If anyone can help.

  Thanks Tanuj,

  After reloading the software it seems to work now.

• I can't get my screensaver to work

  original title: screen saver

  I can't get my screensaver to work... .He is running and all the setings are correct... can help you please... This is a new acer computer everything els works great.

  Hello

  This problem also occurs if the mouse sensitivity is high and the optical mouse. Just to check unplug it and see if it works later. Post your result. Take care.

  Vanshaj Daga [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Satellite C660 - 18 c - can't get the microphone to work

  So, I couldn't get the microphone to work so I bought a new one. I also can not get this to work. I tried everyway I can think of and he will simply record is not all sounds and yes the microphone is on and the volume is full.

  Can someone please help me solve this? Its driving me crazy!

  Hi belthazora,

  Just to make sure that we are talking about an external microphone that you have connected to the microphone jack and not internal? I ask this question because the laptop doesn't have the internal mic.

  Anyway, if you use an external microphone ensure that it s listed in sound devices under the recording tab. You see it there?

  I also recommend an update of audio driver if it doesn t work. You can download all the updates on the official page of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Satellite L20-153 may not get the WLAN to work

  Hello world

  I have a problem with my laptop wifes that I've not been able 2 fix.

  Its windows had crashed and wouldn't start in 'BACK' keept marker just flashes and nothing happened, I tried to restore to later work windows, but that did not help, nor the integrated security mode. So I took out the CD/DVD recovery and tried to do a new installation, the configuration of the installation has functioned well until he asked me 2 remove the disc and restart the comp I did.

  When it restarts the same problem appeared (flashing marker and nothing happens).
  So what I did I took a normal windowes XP (SP2) and reinstalled eveverything (I formatted the drive also) and rebooted and it worked.

  2 my next challenge is 2 get all the hardware working I got all all work, but the WIFI network (integrated).
  After I installed everyting I saw my network wireless but next time I started the comp, it disappeared along with all other WLANS that I use to be Alba 2 see. and when I still have refreash sound empty.

  I tried to disable it and then turn it on again but it doenst help.

  I also tried once more to use the Toshiba recevory drive but you have the same problem.
  So now I'm back with my windows Xp is installed, but I can't get the WLAN to work.

  There isn't any conflics material.

  So now I need your help about how to do 2.

  tanks a lot.

  Kind regards

  Quickhat

  Hello

  On WLAN, there is actually no philosophy, and few things are important:
  The wireless network card must be installed properly (properly listed in the Device Manager) and
  It must also be enabled. Initially with switch WLAN (WLAN light is on) and then activate it by using the FN + F8 key combination.

  After making this key WLAN card should see all available wireless networks. To connect to one of them is another theme.
  To be honest I didn't understand exactly what is happening. If I understand you right your laptop can see WLAN but after reboot all available wireless networks is not visible. Am I right about that?

  Have you tried rebooting your WLAN router and restart analysis the WLAN area?

• How to get the webcam to work?

  Hello

  As I don't have a book of instruction for this computer, can someone tell me how to get the webcam to work please?
  It is supposed to be something that appears on the side of the screen, but I left the sit of mouse here for centuries on all sides and nothing. Please help me.

  Kit_e

  Hello

  I agree with the user above. The user manual you can find on your computer because it s preinstalled.

  The webcam, you can use with programs like Skype communication. You can make a video call with friends and they see the webcam image. ;)

• Hello everyone, I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro, Win10/Bootcamp. Is anyone know the procedure to get the display to work with Bootcamp Windows 10?  I have connected screen but no picture. TY

  Hi all

  I just bought a Thunderbolt Apple display to use with my 2012 15 "27" Macbook Pro Win10/Boot Camp running. Is anyone know the procedure to get the display to work with Bootcamp/Windows 10? Is there a setting in the training Camp that must be turned on to make it work? I have connected screen but could not get a desktop display.  Any help would be really appreciated! TY

  The monitor should have a TB and adapter power connector. The monitor works on both OSX. ? If so, shut down of windows, connect monitor and start Windows. Your TB 2012 monitor is not plug-and-play with Windows.

  Please see ports Thunderbolt and views: frequently asked questions (FAQ) - Apple Support .

  1. the "hot pluggable" Thunderbolt devices using Windows with Boot Camp?

  Thunderbolt hot plugging is supported under Windows 8 or 8.1 on all Macs from 2014 and later.

  For all other Mac computers, Windows 7, 8 and 8.1 scans and active them Thunderbolt devices connected to ports Thunderbolt during the Windows startup process. If your device has been plugged in not at startup, Windows detects not without a reboot.

• My new system see the the old system in the network, but I can't get the passwords to work and I tried all the. Now what?

  ESTABLISHING A NETWORK.

  My new system see the the old system in the network, but I can't get the passwords to work and I tried all the. Now what?

  Hello

  1. don't you make changes on the computer before the show?
  2. what version of operating system you are using on the computer?
  3. which network you're talking about (home wireless network or group)?
  4. which steps have tried?

  
  If you use a group home on the computer, see the link for more information.
  Home Sweet homegroup
  http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

  You can also check out the link.
  Microsoft's strategy concerning lost or forgotten passwords
  http://support.Microsoft.com/kb/189126

   
  Provide us more information for you to help.

• How can I get the screensaver to stop after a few minutes, while the screen turns off.

  original title: computer sleeps

  I leave my computer on all night.  When I'm done with it for the day, after 5 minutes, the screen saver turns on.  How can I get the screensaver to stop after a few minutes, while the screen turns off.  What we call that?  Sleep is - this Mode?  Hibernate? Thank you!

  Hi miztex37,

  ·         You want to put the computer in sleep mode?

  See the following article to see if it helps.

  Microsoft Windows XP - automatically put your computer into standby mode

  See also:

  Microsoft Windows XP - manually put your computer in sleep mode

• Cannot get the sound to work on my hp mini computer

  I seems that I can't get the sound to work on my laptop. I ran several updates and also tried troubleshooting. can someone help me!

  Re-post with the following info: laptop, name and model number.

  Or if you, re - install your audio drivers (on the site of manufacturers of laptop or any CD you provided with the unit).

  See you soon,.

  Jerry

• HP ENVY Phoenix 810-160: I can't get the sound to work

  I just got the

  HP ENVY Phoenix 810-160 and I can not for the life of me get the sound to work.  I use it with a HP Envy 23 inch monitor which also has audio Beats and a HDMI cable connection.  I went through all the steps on the support page of the monitor and desktop support page.  Any help out there?  Thanks in advance.

  Hello

  No, it's going to work, you can not connect computer Office AiO 23 and get a sound of the AiO 23.

  Kind regards.

• How can I get my screensaver that worked on windows xp to run on windows 7?

  Original title: How can I get my screensaver that worked on windows xp to run on windows 7 error: the version of this file is not compatible with the Windows version you are using. etc. I know that you saw the message before.

  computer brand new, no change. try to load my programs of hp simple save on my new computer.

  The msg is to tell you what is not compatible

  You can not copy/transfer a program from another PC

• How to install (gdiplus.dll) to get the printer to work?

  HP Presario cq62 notebook, HP deskjet 3845, windows7, error message reads as follows: gdiplus.dll is missing. How to install this to get the printer to work?

  Hi RDT49,

  Gdiplus.dll error messages may appear when using or installing some programs when Windows starts or shuts down, or maybe even during a Windows installation.

  The context of the error in gdiplus.dll is a key piece of information that will be useful while solving the problem.

  Cause of Gdiplus.dll errors

  Gdiplus.dll errors are caused by situations that lead to the removal or corruption of the gdiplus.dll file

  In some cases, gdiplus.dll errors could indicate a problem, a virus or malware Registry problem or even a hardware failure.

  I recommend you contact the manufacture of your computer to help solve the missing DLL file problem.

• Re: How to get the Tempo to work properly?

  Hello

  I have problems with the service of Tempo.

  I don't get updates via this application (all the settings of this application are accurate, i.e. "full control"). I know this because there are updates available online to my laptop via the pilot site of toshiba.

  When I installed first Tempo, updates for about a month, I received, and then all of a sudden, no update came through. My firewall is blocking either of this application.

  I tried to reinstall the application, but no change in the situation.

  Does anyone know if ALL updates are available via the website of driver toshiba out tempo? Because, in the month that this service worked, I got an update of the bios, but I recently saw a bios update online and Tempo has not always reports that it is available.

  Any ideas on how to get the Tempo to work properly?

  Thank you.

  I saw in your other thread you have installed SP1 on your Vista laptop.
  There may be some compatibility problems between SP1 and Tempo

  And Yes, as far as I know Tempo bring all available updates!