Help hp deskjet 845c

Similar Questions

• HP Deskjet 845c on windows 7 64 bit

  Hi evry body
  I can't install my printer on Windows 7.
  However, it is succfull installed on Vista.
  Help!

  Please, where can I find these drivers!

  Enzo says:
  Hi and thanks for writing, test what you say and always gives me the same error "windows could not get a list of devices from windows update. "Please try again later" I live in Cuba, and my connection is very slow, if I give a link where download you would be easier

  OK, this is not quite a direct link, but try the following: go to catalog Microsoft update site (you will need to use Internet Explorer, not FIrefox or another browser).  In the search box, select Deskjet 845c, and then press ENTER.  There will be a list of four choices, one you need is that which is 11.6 Mb in size (it is the 64-bit version).

• HP Deskjet 845c not print color

  My 845c deshjet just stopped printing color and black ink is printing gray. Is there a solution?

  Ed

  TeleTech

  Hello

  I understand you are having a problem printing with Deskjet 845c printer. I will definitely do my best to help you with this.

  It could be a couple of things causing this problem for you, then I would like you can start by checking the cartridges and work your way through this document.

  Another good step to try is to connect the printer directly to a wall jack to make sure it gets all the power it needs to function properly.

  Hope this helps, have a nice day!

• HP Deskjet 845c stopped printing in the middle of a job and don't print any more

  My deskjet 845c was printing fine and then suddenly stopped printing in the middle of a page. The power light is on and steady, and the orange light blinks.  I can't print at all at the moment.

  I followed the troubleshooting listed using the HP diagnostic Print and have removed and cleaned the ink cartridges, but the orange light still flashes.

  Any help you could offer would be greatly appreciated.

  Thank you.

  It seems that one of your cartridges has failed.  I don't remember if the printer Deskjet 845c is printed in reserve with a deleted cartrdige mode.  If you then remove the cartrdige color and try to print a test page.  If this works the cartrdige of color was at fault.  Otherwise then reinsert the cartrdige color and remove the black cartrdige and print a test page.  It worked?  If so, the black cartrdige is at fault.

  If the printer will not print with a cartrdige deleted then I would replace the black cartridge with a replacement fee.  My experience suggests that the black cartrdige is usually the culprit...

• HP deskjet 845c does not print

  My printer is "hp deskjet 845c. My operating system is 'Windows Vista - Service Pack 2'. The cartridge does not move when I try to print or open the printer itself. The green power light & the orange alert light both blink. There is no jam or something like that. Everthing is clean, without dust inside & on the cartridge. Refreshment & reset does not work. Any advice will be appreciated. Thank you.

  cBaker

  Hi craigbaker1,

  What are the levels of ink in each cartridge?

  I would recommend reinstallation of ink cartridges and replacement of low ink.  Are you able to move the cart?

  You can also try a hard reset in the following order.  To do this, unplug all cables including the power cord at the back of the printer when the printer is still on.  Unplug the other end of the power cord.  If there is a power supply on the power cord, disconnect one end and reconnect it.  After 60 seconds, plug the cable directly into a wall outlet ( not a surge protector or battery backup ) then plug it into the back of the printer.  Are there changes?

• Problems with the help of Deskjet 3745 on home network 2-PC

  I have an old PC running Windows XP SP3 and a new one running Windows 7, but only one printer. The network that connects the PC is on an ADSL router with its own external Iomega network drive with a USB port.

  To make the printer can be used on two computers,

  1. I initially plugged on the Iomega USB port. But the port was effectively a 1-way connection, so I couldn't preview before printing to see which form/profile of the printer used. So I put discarded and...
  2. revenue to the printer connected to a PC all the time and share it on the network. But two different PCs drivers needed which would not talk among themselves, and the establishment would simply not work.
  3. Finally, I went back to the simple method of the printer on the USB port of any PC, sure I needed it for us. Worked well for a while until the WINDOWS 7
  • Print preview has begun showing empty images (but print correctly).
  • print-queue doesn't have to face the cancelled documents.

  I had help of Deskjet Support to address this issue, which even reinstall the drivers on two PCs - several times! But I'm still left unresolved 3 problems with Win 7 donations.

  Has anyone encountered a similar situation and found a satisfactory solution to work?

  Try the following: connect the printer to the XP computer and set the machine XP to share it on the network.  On the Windows 7 machine go devices and printers folder, add a printer, a local printer, create a Port, Local Port, \\Computername\Printername (use the name of the actual share of the computer and the printer), OK, and then click Windows Update, and then select (not Hewlett-Packard) HP Deskjet 3740 series (Bobo).

• DeskJet F4580: help! DeskJet F4580 no USB cable wireless configuration!

  Hello!

  I recently got an opportunity of HP Deskjet F4580 of my university degree all-in-one wireless printer and I can't understand how to set up for printing. The person who gave it to me had more the USB connector, but they said I should be able to put it up though as it is a wireless printer.

  The problem is that all of the messages that I found on this issue, said either connect manually to Wifi using a USB cord, press the WPS button on the router for a long time until it the printer automatically connects to the router (I tried this and nothing happened), or press the wireless to the printer and then connect to the wireless connection , it emits and then use this method. The question ultimately is that even if I am able to get the flashing blue wireless key none of my devices wireless recognizes the printer as a wireless network (at least not as far as I understand).

  I tried to set up since yesterday and I'm really mixes responses to what I should do. Can someone please help me solve this problem?

  Thanks in advance

  Yes you will need a cable to USB printer like this.

  https://www.Amazon.com/AmazonBasics-USB-2-0-cable--male/DP/B00NH11KIK/ref=sr_1_1?s=PC&ie=UTF8&QID=1471960536&SR=1-1&keywords=printer+USB+cable

  Then, download and read the Guide here...

  http://support.HP.com/us-en/product/HP-DeskJet-F4500-all-in-one-printer-series/3944755/model/3944756/manuals

  and follow the instructions to connect through the connection of Tradional wireless.  Only insert the cable when the software tells you to do.

• Double track scanning with the help of Deskjet 3520

  Hi all

  I just bought an all-in-one Deskjet 3520 Pinter.  Far so good except that I can't figure out how to scan multiple pages into 1 PDF document.  I found a guide who said there was a button to add pages on the left side of the screen preview of the scan, but it doesn't seem to be there!

  I am running Windows XP.  And help greatly appreciated

  Scanning from the printer should actually encourage not to all other pages...

  Scanning multiple pages can be done via the software itself.

  Open the printer software, or scanning HP and then scan a Document or Photo.

  Select PDF, check the resolution is 300 dpi or less and preview it is checked, and then click Scan.

  change pages, and then click the Plus sign button to scan additional pages.

  Once you're done save the analytical work and it must be registered on a single PDF file.

  Shlomi

• Help - hp deskjet 5650 - printer cannot print black after changing cartridge

  original title: help the printer - hp deskjet 5650

  OK, so my black printers ink ran out, so I changed the cartridge.  The cartridge said it is appropriate for my printer.  However, now he usually print anything in black... Help!

  Replaced by Inkrite H-56 who say that it is suitable for Deskjet 5650.  I ran the test page, still no black ink.  Any tips?

  Hello

  If you have a problem after the replacement of a material component, the manufacturer with your HP printer ink cartridge

  link below has Manual HP how etc. for your model

  http://h10025.www1.HP.com/ewfrf/wc/product?product=304445&LC=en&cc=us&DLC=en&submit.y=4&submit.x=8&lang=en&cc=us

  or contact HP

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=us&lang=en&product=304445

  or hp support forums

  http://h30434.www3.HP.com/

• help with Deskjet 1050 j410 installation fails

  Hello, I'm on windows 7 on a HP Mini Note, I tried to install the Deskjet 1050 j410 printer all in one, several times, but I get the same message:

  Setup error

  Call to DriverPackageInstall returned error-536870141 for package ' C:\Program HP HP Deskjet 1050 J410 series\DriverStore\NGScanDriver\HPWia_Dj1050_J410. INF '.

  I downloaded the Installation HP troubleshooter, run a selective startup (disable all non-microsoft startup items), even deleted my program autorun eater, still without success. Any help would be appreciated, thanks!

  Since you have Windows 7 Starter, you will not be able to install the full features software and the printer driver. You will only be able to install the base driver, and you will only be able to install the printer via a USB connection. I'm sorry.

  HP Deskjet Basic drivers

• Help - HP Deskjet Ink Advantage 2010 printer K010a

  I lost my CD to install my printer... can someone help me to install it?

  Name of the printer:

  HP Deskjet Ink Advantage 2010 printer K010a (CQ751A)

   

  New here im (12 years need assistance) 

  Hello

  To choose the right operating system for your computer download from the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=4157335

  Good luck.

• HP Deskjet 845c series

  When I was on WIndows XP, I could print on both sides of the page.  But I'm on windows 7 now and it does not allow me this installation. It allows only HP Deskject 845c to download and print only on one side.  With the help of paper so.  Can someone help me solve this problem.

  Thank you

  In this case, this machine doesn't have the necessary material for the duplex, which is not done by changing your OS. With this printer, your only option is to duplex manually.

  Instructions that are in the product guide I linked you above at pages 43-44.

• Help. DeskJet 1050 does not print in black

  Hello

  Just installed my deskjet j410a 1050.

  You wanted to print a small black text.

  But I got a blank page.

  Testpageprinting gives only the collour prints but the tasks that should be black-impressions are just empty

  Diagnosticsprogram said... all right.

  I can still see the inktlevel cartridges.

  Can someone help me out... of the suggestions?

  Best regrads

  Peter

  Hello peerke63

  Please try the following article. It can help to solve your problem.

  Printing blank Pages

• I need help for Deskjet F4280 AiO

  I bought the machine 5/1 & think I've read everything that is available, but still can't really understand it. I'm not computer smart but have had or used several different AiO over the years that are simple to use, almost just a matter of a few clicks to get the job done.  I'm not working with pictures right now, but really need to be able to scan documents to my email & is there lies the biggest problem.  It seems that just uses something Microsoft Office & PDF & Tiff.  It's waay too big; I didn't even know that was my Office, do not know how to use it; & don't know piddley on PDF.   I installed it maybe wrong?  I'm finished with 9 points in my Add / Remove list.  Also, on a page where I was looking for help, there was something on "alerts for this product: Customer Participation program software, critical update" & a broad yellow streak down my back so I don't click it, I don't know what it is called, is something I really need to do?

  Sorry for my ignorance.

  I have the Deskjet F4280 AiO

  Windows XP SP3 home edition

  AiO is connected by USB cable

  I connect to the Internet by cable broadband

  Thank you.

  Guess I'll go ahead & closes, but doubt will be of no help to anyone else, since it is this mixture of different region.

  My original well on "scan to e-mail" problem (1 post) is still not resolved, so I started a new one yesterday under scan, fax and copy Board.  I realize there are a few answers to my scan problem initially but if I remember correctly I still couldn't it.  Most likely, the problem lies in the ditz that tape now.

  Thank you once again Dexter for all your help,

  crackers

• Transport jam ink DeskJet 845c

  I removed an ink cartridge to bring to the store for a replacement and closed the cover of the printer.  When I got home, I opened the cover of the printer, waiting for transport to move the cartridge door at the Center as usual, and it does not move.  I hear a mechanism making a "tent" sound, but after a second he stop trying.

  I can't figure out how to remove the skin on the printer to try to access the cartridges now hidden.  I hope that by placing the new cartridge in place, transport may decide to move again.

  So far, nada.  I have pulled slightly shaken slightly, etc., but do not have an idea of what mechanisms might look like should I check, as I can't get the skins out of the side of the printer where the transport is seated normally when not in service.

  Help!

  I finally found the problem, but it took some brutality to remove the skins on the cartridge "parking place" (under the cover on the right).  Plastic snap to attach the skin to the metal chassis (at the bottom of the printer) had to be broken, but this isn't a big deal, just hard to do.

  With a screwdriver, I slowly moved the gears under the cartridge door stuck and connected to the power supply.  After this a few times, the cartridge door finally "taken" and moved along the distribution to the center position.  Under the cartridge parking space was a ton of Gummy of ink (ink + dust) which had prevented the smooth retraction of a platform that seems to extend in the cartridge when the printer is not in use.

  I turned off and cleaned the goo better I could and replaced the cover back as much as possible (a few broken pieces do not affect functionality, but not all together 'snaps' as the original), and it works fine again.

  It does not appear that this Panel is designed to be removed to access a holder/cart cartridge stuck in its parking location.  Too bad the shots had to be broken to gain access to this area, but at least it works again!  All's well that ends well, I thank you again for your suggestion.

  So it ended up being a mechanical problem of gum-to the top instead of an electric, because I suspected from the beginning, but just couldn't get off this cover!