Help I can not activate the data Panel in dreamweaver cc 2014

Similar Questions

• Can not activate the data protection

  Hello

  My iPhone 4S is running iOs 8.3.

  I went through this tutorial from Apple, trying to turn on data protection:

  https://support.Apple.com/en-us/HT202064

  Unfortunately, the "Access Code" menu does not appear in my menu, "General".

  I am unwilling to update to iOs, because it would slow down everything.

  If anyone knows if the protection of the data is made available to me?

  Thanks in advance,

  William

  What about this link instead:

  Use a password with your iPhone, iPad or iPod touch - Apple Support

• I have the old version of photoshop cs a perpetual license. But I can not activate the license via internet and phone. Can you help me?

  I have the old version of photoshop cs a perpetual license. But I can not activate the license via internet and phone. Can you help me? @

  CS2, Acrobat 7 + Audition 3 (AND PREVIOUS) activation server has disappeared, then read below

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  .

  You MUST use the special version and the serial number on the page, not your original drive or serial number

  .

  NOTE that CS2 will not install on a "modern" with an Intel Mac

  When you install the special version of CS2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select compatibility Windows XP in the popup of option

• Where is the data Panel in Dreamweaver CC?  This feature has been removed?

  Where is the data Panel in Dreamweaver CC?  This feature has been removed?

  Mike

  There has been a lot of discussions about this. Server behaviors are passed to CC.

  You will need to apply the workaround Extension described below.

  http://blogs.Adobe.com/Dreamweaver/2013/06/a-look-at-the-modernized-Dreamweaver-cc.html

  Nancy O.

• I just bought 14 items for my PC.  I'm trying to find the tool history brush in the Toolbox, but can not find the tool Panel.  HELP!, I just bought 14 items for my PC.  I'll try to find the tool history brush in the Toolbox, but cannot

  I'll try to find the Brush tool that is supposed to be in the tool Panel, but I can't find the tools Panel.  I just bought 14 items for my PC.  Also, I want to be able to have several photos to the top at the same time so I can move something from one photo to another, but I didn't understand how to do this.  I had worked with 10 items.  It's quite confusing to me.

  Chantig1 wrote:

  I'll try to find the Brush tool that is supposed to be in the tool Panel, but I can't find the tools Panel.  I just bought 14 items for my PC.  Also, I want to be able to have several photos to the top at the same time so I can move something from one photo to another, but I didn't understand how to do this.  I had worked with 10 items.  It's quite confusing to me.

  I could be wrong, but I think the tool 'tool shape history' exists only in the full Photoshop...

  My advice is to use the help file (in online or download the manual pdf https://helpx.adobe.com/pdf/photoshop-elements_reference.pdf)

  The interface has been changed in version 10, and you'll save time by looking at the different tutorials about it.

  The tool options palette is on the background, you can open it in the horizontal icon bar: second icon of the tool option palette or a first for the photo tray.

  Look at the menu display to choose how view several files at the same time. There is also an option in the menu Edit/Preferences to "allow the floating windows in expert mode.

  To move one photo to another, you can use the photobin to drag a photo to another already open in the display panel. You can also drag layers in the layers panel to another picture displayed.

• want to im going in circles here needed to recharge CS3 but says that I can not activate the license

  Want to im going in cirlces here needed to recharge my creative suite 3, but he says that I can not activate my license.

  When you have a non-functional computer and cannot turn it off, click on the link below

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations

  or

  Invalid License http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

  - and more help in http://helpx.adobe.com/creative-suite/kb/invalid-serial-number-cs4.html

  and

  CS3 IS activation server still works https://forums.adobe.com/thread/2165284

• 1 TB 3.5 "DT01ACA100 Rev: AA10 AAA/607. I can not activate the mode of SATA3.

  My GA 970 a - DS3 motherboard. My Win7 64 bit OS. I can't activate the mode SATA3 hard drive. Please help me.

  The performance of the HARD disk and the interface will be recognized automatically. Sometimes the BIOS contains an additional parameter to toggle between the different SATA interface options. It would be interesting to check it out...

  The city 3.5 "HDD supports the Serial ATA 3. 0 / ATA 8 interface and in the case of the motherboards HARD disk controller support the SATA3, HARD drive should be able to provide the mentioned interface speed

  Here you will find details of the HARD drive:
  http://Toshiba.SEMICON-storage.com/e...t01acaxxx.html

• Windows 7 can not activate the 0x800702c7 error code.

  Original title:

  my pc can not update bacause of an 0x800702c7 error code

  my windows 7 can not activate bacause of an 0x800702c7 error code

  What will I do?

  Hello

   
  How you try to activate Windows?
   
  Reference:
  Activate Windows 7 on this computer:
  http://Windows.Microsoft.com/en-us/Windows7/activate-Windows-7-on-this-computer
  Activate Windows 7: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/activating-Windows-7-frequently-asked-questions
   
   
  I hope this helps!

• Can not activate the sound

  I have a HP Pavilion dv7 1232nr. Everything has been working great until two days when I realized that the mute button at the top of the laptop is RED (silent) and I can't seem to "reactivate" it or change the volume using the key above the keyboard.

  When I go into Control Panel, Manager of devices, it is said that everything works correctly. My headphones will work, but other that that, I can not all sound from the internal speakers. I see green bars move when I music, etc, but I am unable to hear it without a helmet.

  I spoke with a colleague and she said her daughter has had the same problem and they had to download something, but she can not remember what it was.

  Anyone able to help? Thank you in advance.

  The sp41479 is this driver. :-)

• Can not activate the discovery network in Vista

  I just reinstalled Vista on a laptop and went to connect to a wireless network that previously worked before the re installation of Vista.  Network discovery was off so I turned on and then you click on confirm and return to the window and it is still off.  So, I can't turn it on.  Any ideas please?

  Hello

  1. What is the brand and model of the computer?

  2. What is the accurate and complete error you get when you try to activate the service?

  3. What is the security software installed on the computer?

   

  Method 1.

  Step.I

  Make sure that the following services are enabled on the computer.

  (a) click Start and type "services.msc" in the search and click on services and ensure that these services are enabled:

  -TCP/IP NetBIOS Helper service

  -DNS Client

  -Function Discovery Resource Publication

  -SSDP Discovery

  -UPnP device host

  To start the service and set it to automatic, follow these steps:

  (b) right click on each of the services listed above and click Properties.

  (c) click the general tab, and then, next to startup type, select automatic.

  (d) click on apply and then click Start.

  Step.II

  I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

  Step.III

  Try setting your computer unbootable inClean State and check to see if the same problem happens. Setting of the clean boot state system helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Step.IV

  The problem can also be caused by your security such as anti-virus program or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must activate new security that you was disabled programs.
  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2.

  You can update the network drivers and check.

  Update a hardware driver that is not working properly: http://Windows.Microsoft.com/en-US/Windows-Vista/Update-a-Driver-for-Hardware-that-isn ' t-work properly

  Refer.

  Enable or disable network discovery: http://windows.microsoft.com/en-SG/windows-vista/Enable-or-disable-network-discovery

  I hope this helps.

• Can not activate the Win7 x 64 Win XP x 32 update

  I couldn't move from Win XP x 32 to Win7 x 64 using the upgrade process.  So I did a clean instead install.

  How can I enter the old XP information in the validation process?

  You can not, you will need to phone activation:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Can not activate the window 8 pro on new PC

  Brought a copy of download windows student pro under a year ago and put it on the first test bench, I built and use. Just built another platform and it won't let me activate the new rig. Copies of students say that it can be used 5 times. It is the 2nd platform on what I put.

  Try the phone activation:

  1. press the Windows key + X , and then clickrun, and then type: slui.exe 4

  
  

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• Can not get the data entered in the text box item

  Hi, I am new to APEX I hope you can help me.
  I have the following situation.
  
  I created a page with a region (R1) on which are shown details of certain rank on a table (T1) as id, name, type, date... etc all separated in the form of text fields.
  
  Below this region R1, I created order (R2). The R2 I added an article - text area (P2_COMMENT) and update button (send operation). I created the process anonymous PL/SQL block for this button. Process contains insert statement that needs to insert a row in another table (T2) with data on the R1 and the R2 P2_COMMENT. But it does not work. When I enter text in P2_COMMENT and press the button to update, it addresses field P2_COMMENT with a null value. If I put P2_COMMENT as a value in an insert statement, then it works so PL/SQL is ok.
  
  Whay my SQL statement is not to get P2_COMMENT values?
  
  Thanks a lot in advance, best regards.
  
  APEX 4.1

  Hello

  It is difficult to know exactly without seeing your code could so you paste the code PL/SQL process in this thread.

  Another thing you could try running the APEX Counsellor who is clicking on app Builder utilities then advise. You will find some common mistakes.

  Thank you

  Paul

  Published by: Paul Broughton on June 3, 2012 05:58

• Can NOT see the data store after ESXi update host?

  Hi all

  We use the host ESXi 3.5 on DELL PE 2850 with RAID 5 local storage.  Today, I ran utility update for the host VMware and firmware updated BIOS and RAID on the host computer before a restart of the system.  After the reboot, the system correctly loads the operating system and when I check for storage, the data (with critical VM) store is missing.  Can not see that again.

  Please help me to recover my data with the virtual machines in her store.

  Thank you

  Nadine

  ESXi is installed on the same Partition RAID 5, which is located in the VMFS data store? for example. do you know that the partition is still intact?

  According to what the RAID firmware upgrade has done, it is possible that you may need to set the LVM. EnableResignature option 1 if the score ended with a new UUID.

  -ben

• After update to 5.0.15 server, can not activate the OD service and the Profile Manager

  Hi, I have recently updated my Server 5.0.15 under El capitan 10.11.3.

  After that, Service OD and the Profile Manager can be activated server GUI.

  Of course, all users on my network are missing from the list of users; just local users remain.

  Reason: cannot be connected to the node 127.0.0.1

  How can I recreate an OD without use of app server?

  Thank you.

  P. S.

  Of course, even in the local server translates users preferences pane not connected.

  Many Open Directory problems can be solved by taking the following measures. Please test after each of them that you have not already taken it and back up the data before making any changes.

  1. the OD captain must have a static IP address on the local network, not a dynamic address. It must not be connected to the same network with more than one interface; for example, Ethernet and Wi - Fi.

  2. you must have a working DNS serviceand the host name of the server must match the FQDN name. To confirm, select the server by its name in the sidebar of the window of the server application, and then select the Preview tab click the button change on the host name line. The access that your sheet of server, the domain name must be selected. Change the host name, if necessary. The server must have at least three levels (for example, "server.yourdomain.com") name, and the name must not be in the top-level ".local" domain, which is reserved for Hello.

  3. the main DNS server used by the server must be itself, unless you use another internal DNS server. The only DNS server on the clients should be internal, they should get from the DHCP server, as appropriate.

  4. If you have accounts with basic network directories, make sure that the URLS are correct in the user settings. A return status of 45 from the demon authorizationhost in the newspaper may mean that the URL for the installation directory was not being updated after a change in the host name or the file sharing protocol (AFP, SMB, or vice versa.) If the server and the clients run all OS X 10.10 or later, directories should be shared using SMB instead of AFP.

  5. follow these instructions to recreate the Kerberos configuration on the server.

  6. If you use authenticated connection, check the validity of the certificate of the master. The common name must match the host name and domain name. Unselection and then reselect the certificate in.app was reported to have an effect in some cases. Otherwise, delete all certificates and create new ones.

  In the case of a self-signed certificate, create a trust profile in the Profile Manager and deploy it to the customers. On the server, you may need to create the folder

  /etc/openldap/certs

  and place a copy of the certificate of the server, for example:

  /etc/openldap/certs/server-name

  Also add a directive to the file

  /etc/openldap/ldap.conf

  of the form

  TLS_CACERT /etc/openldap/certs/server-name

  7 remove the link, then to connect customers in the preferences users and groups window. Use the FQDN of the master name.

  8 restart the master and clients.

  9. do not connect you to the server with the account of the user of a network.

  10 turn off the internal firewall in use, including third-party "security" software

  11. If you have created replica servers, remove them.

  12. If OD has recently stopped working while it was working before, you can be able to restore automatic backup in/var/db/backups, or a snapshot of the time of this backup Machine.

  13. If there is slapd errors in the log, try the following steps.

  Disable the Open Directory in the server application.

  Enter in a shell:

  cd /var/db/openldap

  sudo -s

  db_recover -c -h authdata

  db_recover -c -h openldap-data

  Turn on Open Directory.

  14 reset database password strategy:

  sudo pwpolicy -clearaccountpolicies

  15. as a last resort, export all users od. In the Open Directory of the server pane, delete the OD server. In some cases, you may need to use the shell to remove the server. Then recreate it and import the users. Make sure that the UID is in the range 1001 +.