help, I can't Flash the bios to install GT750m5 on my Y510P

Similar Questions

• Equium A110-276: can I update the BIOS when installing Vista?

  I don't know where to post this...

  "I have a clean install of Windows Vista on my satellite A110-276. I have to update the BIOS or not? Is - mandatory/mandatory BIOS update?

  Hello

  It seems that Toshiba has released a special version of the BIOS for Windows Vista.
  If you want you can check it on the page of the Toshiba driver.

  But if your Vista runs correctly on the computer laptop with the previous version of BIOS you n don't need to update the BIOS.
  I recommend updating BIOS, if any odd operational behavior will appear.

• Help! can't see the bios screen! DV7 - had to solve myself - idiots here

  
  

  Finally figured out how to enable VT - X in my bios without my computer screen or the * beep * ing * beep * ers here that can't help with * beep * cus they're idiots. ESC-> F10, right, right, right, right, down, enter, up, enter, F10, up, enter, enter - only took 4 months

  [scott@localhost ~] $ lsmod | grep kvm
  kvm_intel 138528 0
  KVM 422809 1 kvm_intel

  Thanks for nothing, evil be ever buy any material hp ever again and will recommend that the company I work helps to ensure that they do not buy anything for HP data center.

• I just bought more Ram how can I check the bios updates before I install it?

  I bought 2 4GBs 200 PIN DDR2 memory from Crucial to upgrade my Pavilion dv4t notebook 1400 from 4 to 8 GB

  Series (DDR2) (p/n NS244AV)

  I am running Win 7 Ultimate 64-bit service pack 1

  The directions say I need check the bios with the maufacturer updates to see if I need to Flash the bios before installing the new memory. How do I do that?

  Thank you for your help

  See "updating the BIOS" to determine the current version of the BIOS installed and the update of the BIOS if necessary. Please see the HP Pavilion dv4t-1400 CTO Entertainment Notebook PC drivers & downloads page to the latest BIOS version available for your computer. Click on version update for HP Notebook System BIOS (Intel processors): F.66 A for a direct link with the BIOS download page.

  Please click the White Star of KUDOS to show your appreciation

• I need help to Flash the bios. I have an Aspire 5810TZ. I start and it just says: "acer".

  I need help to Flash the bios. I have an Aspire 5810TZ. I start and he just says "acer" and goes no further. I went to the download page for BIOS on us.acer.com and it has a zip file with 5 files:
  JM4151135.exe
  IN FLORIDA...
  GPC_V135.bin
  Readme.txt
  FLASH. BAT
  What should I do? I tried to copy the files on a USB key and turn on/off with Fn + ESC key. After the release the power button and pressed Fn - Esc another screen appears after 30 seconds. I gave up and gave her 30 minutes but it does nothing. I read another person that should be flashing power button online. I have to rename one of the files. Help, please!

  Aspire 5810TZ menu of frozen startup.

  I finally understand it.

  I couldn't start a back b/c drive, it me did not start anything.

  I followed this chain of logic:

  -Downloaded the bios (2.35 is the one that worked for me)
  -Find the exe file in the winflash file.
  -Extract the files in archive exe using the 7-Zip program
  -Find the .fd file and rename it to JM41X64. FD (I read in a forum was unique in my laptop)
  -Copied JM41X64. FD and FLASH it is. EXE on a USB
  -A the battery and the hard drive out.
  -With its trendy diet I supported Fn + Esc and that you press the power button once while ensuring that the Fn + Esc has been always held down.
  -J' waited 6 seconds and release the Fn + Esc and seen the flashing flash player
  -After about 10 minutes, restarted the machine and the bios as like new.

  Later, I found that there was a hard drive problem.

  I want you guys should help more. All I needed was the name of the JM41X64 file. FD and you don't know how many hours I put into trying to find how simpy bios flash. It is not that difficult for someone with a b.s. in computer science to learn how. Couldn't we a m.s. back b/c the bios drive was messed up. F12 didn't work.

• Hello, I need help, I can't play the video using Facebook. Works very well in Youtube. I use Safari. Tried different solutions such as changing preferences, reinstalling Flash.

  Hello, I need help, I can't play the video using Facebook. Works very well in Youtube. I use Safari. Tried different solutions such as changing preferences, reinstalling Flash.

  Hello

  Please try following the steps and see if it helps

  1. Please work through this guide.

  https://helpx.Adobe.com/Flash-Player/KB/video-playback-issues.html

  Follow the instructions in the guide on the provision of the dxdiag report and additional information on what you tested and observed.

  2 turn off hardware acceleration in the settings. Steps are mentioned in the link below

  How to disable or enable hardware acceleration?

  Thank you

• How Flash the BIOS if you cannot start Windows

  Hello

  I have a BIOS virus which prevents ANY version of any operating system Windows to boot at all.

  (Linux will start and run fine)

  So, to solve this problem, I need re-flashing the BIOS.

  Problem is... HP offers only the BIOS as an executable Windows utility.

  Can someone help me figure out a way to Flash the BIOS WITHOUT Windows?

  THX

  Now, in response to this topic, I discovered a solution...

  HPBIOSFILE.exe - writeromfile /-writehexfile /-writehdrfile

  I hope this helps some of you.

  To use this...

  (1) download the executable file (.exe) for BIOS update for your motherboard

  (2) a copy of the program flashing of Award Bios BACK (Google it, easy to find)

  (3) obtain a downloadable copy of the BACK 6.22 (of Microsoft) and create files to start this one.  (possibly another computer to do this).

  (4) start your computer affected in BACK 6.22

  (a) copy the files in a directory

  "(b) using the bold line above... type the name of your BIOS instead of the HPBIOSFILE.exe file ' and run the command.

  You will find yourself with a ROM file, a BIN file and a header file.

  You can now re-Flash your BIOS on your HP computer outside of a Windows environment.

  ENJOY!

• Satellite Pro A300-257 while flashing the BIOS

  Hello

  I have a dilemma. I recently installed windows 7 on my laptop of girlfriends who is a Toshiba Satellite Pro A300-257, everything went well until I tried to update the Bios. I followed all instructions on the toshiba site had to put the model number in to get good bios double checked and triple checked before running the program, but when I ran the system crashed to halfway through the closed system update and now it wont even boot lights are on cd player is ROAR a few stays on black screen.

  I read many forums and it seems im not the only one with this problem.
  I just got the phone to toshiba and they say im not covered because I does not you can call and go through it with them on the phone, even if at no time did he tell me to do that I followed the instructions of there Web site.
  I also confirmed with them that I used the correct bios but they say that they are unable to prove that and I can put in the wrong information that I did not.

  In my view, there is a program that will allow me to boot from the cd so I don't have to go out and buy a reader external floppy to Flash the bios, I think that his winflash. Unfortunately, all I can find is the executable program on there website which im guessing will not start work.
  Anyone know where I can find the prog to update the bios and the bios file so I can create a cd bootable to Flash the bios.

  Any help will be appreciated with gratitude

  Thank you very much

  Hi mate

  I m afraid there is no alternative to reflash the BIOS to the traditional version of BIOS who can start the BIOS updated using an external USB drive and the floppy disk.

  The European driver Toshiba page contains only the BIOS Win-based that can be updated when the windows operating system. The traditional BIOS is not available for download. Only authorized service partners have access to this version of BIOS and that's why I don t see any alternative as to get in touch with the guys and to ask for help.

• Cannot Flash the BIOS on Satellite L500 due to low battery

  Hey all,.

  Obtained as Satellite L500 (PSLS0A-084002) here. I have the battery not charging issue and everything what I find point to an update of the BIOS.

  Of course, there is a new BIOS for download from the drivers of laptops. So I have the file WinPhlash "sl500 (mv) _bios_w210.exe. However, by running the fact falling before flashing the BIOS with an error number: 144.

  It is because of the battery is bellow 10% charge however I can't it above 10 percent fee that the laptop does not recognize it.

  There must be a way of to WinPhlash running without check. I read that you can run it with the "/ forceit" switch and who will be ignoring the error, but that was for some time and it seems WinPhlash have changed this as she always spits the error.

  I read running back help but after creating a boot cd back, he claims the exe cannot be run from BACK (ffffuuuuuuuu!).

  Any help appreciated. Thank you =).

  Maybe it sounds silly now but there at - it something serious, why you want to update the BIOS on your machine? I mean if everything is OK, why do you need new BIOS?

  In any case, I'm don't know if this will help but please try to remove the battery and check if the update of the BIOS starts if your laptop works on AC only.

• Windows 8 fingerprint reader no longer works (need to Flash the BIOS to fix)

  I have a DV6-7014nr bought around September of 2012.  I have upgraded to WIndows 8 when it first came out.  I had no problem with the reader of fingerprints on Windows 7, but do not use for a long time.

  As the subject says.  I can run it for a few weeks (on Windows 8), and the fingerprint reader stops working.  None of the biometric devices are listed in the Device Manager.  If I try to load the driver, it does nothing, as if the player is simply not there the responsibility of the driver closes just (with no message).

  Peripheral Biometirc in the Panel control says there is no biometric device found and simplepass opens without the fingerprint reader recognized.

  The only thing that solves this is my BIOS which comes Insyde to re-flashing. It is noted in the setup of the BIOS relating to biometric devices.  I have just discovred that BIOS update solves a problem because there was an update that I applied.  Have to reapply the update of the BIOS to fix this seems excessive to us.

  Added March 29, 2013:

  I just re-applied the BIOS two days ago and already the figerprint teader plug working again.  I tried a hard reset (because I saw that as a solution previously, and it is easier and faster to re-flashing the BIOS).  Who has shut down, remove the battery, now the power for 30 seconds button, boot the system without the battery.  He has not fixed the problem and I can't even understand why the fingerprint reader keeps disabling.  A re-BIOS flash solves the problem, it seems that the problem must be with the BIOS software.  Oh I also had turned off the "Allow windows to turn off the device to save power" for the biometric device before he went kaput.  It doesn't stop of is suckier.

  There must be a better way.

  Thank you

  Hello cjwh888,

  Try to restore your BIOS then use Recovery Manager to restore your software and drivers.

  Please let me know if it helps.

  Good luck!

• Cannot Flash the BIOS on A100 (PSAA8E) - flash process freezes

  Hey everybody.

  I am owner of a laptop Toshiba Satellite A100-283 (PSAA8E-1DL044GR)

  I intend to move the CPU (T1350) to a T2400 dual core.

  Before I open the laptop to install the new CPU, I want to assure you that the BIOS will support it-so, I want to upgrade the BIOS to the newest 6.00 version on the Toshiba support site.

  The flash BIOS (S10V600.exe) file is a self-extracting RAR starts automatically the good process of WinPhlash.

  Unfortunately, the last step in the WinPhlash process does not start.
  Instead, the system locks up completely with a CPU usage to 100% (spinning fan at full speed).

  The new BIOS only if written to the BIOS chip since I hard-restarting the laptop and normally boot my linux system. The BIOS is always the version 2.00.

  My questions:

  -Any of you who have already updated the BIOS on this system knew what could cause this?
  -What operating system did you use to Flash the BIOS?

  I was running Flash on a WinXP SP3 LiveCD (Hiren Boot CD) utility, the file loading flash BIOS from a USB storage device (I don't have Windows and would like to avoid to get a new SATA drive and install a 'real' windows there just to upgrade my BIOS, but I would if it could be the only way to get the BIOS flashed)

  Your help is greatly appreciated, thanks and greetings from Germany to the rest of Europe!

  > Before I open the laptop to install the new CPU, I want to assure you that the BIOS will support it-thus, I would like to upgrade the BIOS to the newest 6.00 version on the Toshiba support site

  First update the BIOS won't help you if the old BIOS would not support the new processor.
  In General, you can only use the CPU that is supported by the chipset.
  As much as I know, that the new processors are not added to new versions of BIOS
  http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

  > What OS did you use to Flash the BIOS?
  Since the available BIOS version is based on the Windows version, you must use the Windows which has been pre-installed by Toshiba.
  In many cases, the update of the BIOS requires VAP (value added package) which is necessary if you are running Vista or Win7.

• How Flash the BIOS on Aspire S3-391 when no present OS?

  I have a new Acer Aspire Ultrabook S3-391-6862.  I want to update the BIOS on the unit, but has difficulty because there is no OS on the Ultrabook again (it came with Win8 on it but I wiped the HARD drive to put Win7 on it).  I downloaded the latest BIOS (BIOS_Acer_2.17_A_A.zip) and unpacked.  It contains 2 files:
  (1) HB2V217.exe (size = 4, 664, 003 bytes)
  (2) Readme.txt (this simply says "Windows flash: Please click on 'HB2V217.exe' to update the bios").

  I then added this "HB2V217.exe" (4 664 003 bytes) the Win7 DVD (I did a DVD ISO, then adds the "HB2V217.exe" of the ISO file, then burned a new DVD of Win7 from this new ISO standard).
  The new DVD of Win7 boots fine, date at which I hit 'SHIFT - F10' to a command prompt, navigate to the "HB2V217.exe" file and run it, date at which it gives me a message error "subsystem required to support the image is not present.

  Other misc notes:
  -If I look inside the "HB2V217.exe" (4 664 003 bytes) with 7Zip, it contains 4 files:
  (1) HB2V217.exe (size = 4564828, but it has the same name, as it is the container for HB2V217.exe 4 664 003 bytes).
  (2) PopMsg.exe
  (3) wFlash.bat
  (4) wFlash.exe

  Obvious questions:
  -Should I copy the 4 files for installing Win7 disc rather than their container?
  -Can you tell me what I am doing wrong?

  Thank you

  Thank you for your help Jean Philippe, although I have now solved the problem, though in a different way.
  To answer your question though, the latest version of BIOS was 2.09.

  My solution was tedious but I downloaded "WinPE", built a flash drive bootable with it, the file copied BIOS "HB2V217.exe" (version 4 664 003 bytes) in the flash drive, booted from the flash player, sailed to "HB2V217.exe" and run it, date on which she flashed BIOS 2.17 new to the Ultrabook and rebooted, and success.

  For anyone who has the same problem, it was my convoluted solution (in a manner of long-term assuming that those who read it are not familiar with some aspects of computers).
  -on another computer, I did the following:
  (1) - download Windows ADK ("adksetup.exe"), which is free (http://www.microsoft.com/en-us/download/details.aspx?id=30652).
  2-) plugged a USB key (something more bigger than 200 MB is fine).
  (3) - open windows explore and noted the drive letter of the USB Flash drive, I just plugged.
  (4) - ran the "adksetup.exe" and chose only "Windows PE" of all it's features (I forget if I run 'adksetup.exe' once or twice, but have downloaded more than 3 GB of files in total.
  (5) ' adksetup.exe' run and got a box of command prompt.  I typed in this box (but without the quotation marks):
  (6) "copype x 86 C:\WinPE_x86" (I chose 32 bit (x 86) version, although it may either have worked). "
  7-) after he finished I typed ' MakeWinPEMedia/UFD C:\WinPE_x86 E:.
  (8-) where "E:" is the letter of your Flash drive you noted in step 3.
  -NOTE that it will erase and format your USB Flash drive, so be sure you don't have any data you want to keep on it and make sure that you have given the CORRECT DRIVE LETTER or YOU WILL FORMAT AND LOSE DATA ON a DRIVE OTHER!
  9-) copied the "HB2V217.exe" file for BIOS I unzipped from the zip file, I had downloaded from Acer, for the flash to the root drive.
  10-) moved the to the Ultrabook of Acer and started the Ultrabook USB Flash drive (after setting it's BIOS to boot from the USB ports).
  (11) - target navigation on drive "C:" of the Ultrabook in this is the command line by typing:
  (12)-"c:".
  (13)-"HB2V217.exe".
  (14): the Ultrabook of Acer seems to restart twice because it flashes the BIOS and gives you a course.
  15-) after it's all done, restart the Ultrabook and enter the BIOS to check the version of your BIOS is now new and correct.

  There is probably an easier way to make a bootable stick with Windows on it, but nothing I tried seemed to work, so I was stuck with this complicated scheme.

  It would have been nicer if Acer had provided their BIOS image independent bootable OS as do so many other manufacturers, so you could simply image/burn the image to a floppy or CD/DVD and then Flash bootable BIOS boot media.

  In any case, thanks for your help, and maybe it helps others as well.

• Lenovo 3000 N500 4BG, flashed the BIOS and cannot start more!

  Hi there, bought a N500 yesterday I was updating drivers, everything worked ok and then I tried to Flash the BIOS with BIOS 6get12ww on site (today) and then after a stop, nothing works anymore.  It ends with the Blue error screen Windows.  I tried many ways to get the system up, so I can copy the old BIOS from HDD (WPHLASH seemed to make a backup before flashing), nothing works.  None of my Linux can start the machine, they are all stop in the middle of the process, Linux Mint starts, but the screen is not readable.

  Also, WinXP and Lenovo CD may not start in windows or the recovery console.

  So, how can I get a copy of old BIOS, or how I can recover from such a problem? No floppy drive, nothing can read hard drive (no CD or DOS or Windows Flash boot floppies could reach the hard drive).

  System has 4 GB of RAM, 250 GB drive HARD and cpu T3200.

  Help, please.

  People, problem has been found and resolved.

  It seems the old BIOS flashing, BIOS setting has changed the HDD SATA type was changed to something other than ID and correct that, regardless of the type of BIOS resolved the problem and the system works now.

  Paymaan.

• How can I "downgrade" the BIOS on Satellite Pro P100 - 160 (PSPAE)

  I have just flashed the BIOS on my Satellite Pro P100 4.8.

  The CPU runs at 100%. (90% + for windows explore)

  Only a single core is recognized by my Vista gadget.

  85 CPU temperature

  How can I "downgrade" the BIOS? Where are the older versions?

  When the new BIOS version is available to download older versions are not available more.
  What Satellite Pro P100 you exactly (model name, model number)?

• Pavilion dv7-4270: Hp pavilion dv7-4270us hangs after flashing the bios

  After taking advice from the hp support helper, I downloaded and updated the drivers from the hp website. I left the bios flash to last after you restart the system. I started to windows 7 and everything worked well, then, I went on the hp support site to download the Bios flash and tools that came with it now. Following the steps exactly as they were on the Web site I went ahead and flashed the bios. Once the bios has been flashed, I was told to restart. After restarting the laptop crashing completely