Help! I can't initialize my VI after stopping it!
Hi all
really need help here... The problem is that all first, when I stop the vi to run and try to run again, he's not initialize the original values, instead, I have to make some kind of change to the block diagram (by changing some constant values for example) and den when I run once again, he is able to work properly. Clues on how to solve this problem?
Of course, it is not initialize after the judgment. You have not written code to do. To do manually, all you had to do was select Edit > initialize default values. You also seem to have done run the program with the continuous run button. DO NOT USE. You need a certain time a loop around your box and initialization statement then it's simple.
See the amendment attached. I also cleaned a part of unnecessary code.
Tags: NI Software
Similar Questions
-
Help I can not access my Wifi after I reinsatlled Win7 on my Hp Pavilion dv6-6c35dx
Hello my name is Chris and I just reinstalled Win 7 on my laptop, howvever, I can't get my Wifi to work, I'm missing a few drivers, can you help me?
Here is the driver hardware Id, I miss that I'm missing
PCI\VEN_10EC & DEV_8176 & SUBSYS_1629103C & REV_01 - network controller
PCI\VEN_10EC & DEV_5209 & SUBSYS_1805103C & REV_01 - PCI device
I know that you must install the drives in the order, the ony one I have installed so far are the network driver and graphics driver, I don't know where to find the chipset driver
Hello
Using Windows 7 64 bit? For WLAN, please use the following link:
Kind regards.
-
4540 proBook s does not start after stopping
Brand new Probook s 4540, B7A48EA #BED, of the box. Memory 4 GB DDR3, 500 GB, processor i3, SUSE Linux disk.
I have install the battery, connect the power supply and turn on laptop. Linux installation started, got the message 'creating recovery root tarball' and wait, wait and wait with the same message of Linux. I rebooted the laptop and after that got Linux message 'Cannot find size info part of recovery' and restarted itself, every 120 seconds.
I turned it off, by pressing the power button / stop 5 sec.
After that, I can't turn on laptop. When I press the power button / stop, power, drive, browser and Flash of LED wireless, you can hear disc trying to turn but fail and all the lights go out and about 2 seconds later all lights flash once again, drive tries to spin but fail again and laptop does not start.
I have 'power reset', updated the BIOS (F.40), removed the drive and DVD drives, tried without battery but no change in behavior. I returned the drive and the original DVD. After removing the memory, portable lights, as if, and caps lock flashing of LED 3 times which means error memory. After that, I did a "reset power" once again, reinstall memory and try to start the laptop. After pressing the power button / stop at the beginning I had same symptoms I described, and after 2 portable seconds began. I installed Windows 7 Pro. Laptop computer can be restarted Windows, but after stopping, he can't press start button to start / stop.
One way to start is to move the memory in the other slot, but it cannot start after his stop. After his return in the first memory location can be started again until the next stop. And when start, does not start from the beginning, but after 2 seconds, for his second try. The BIOS memory test, the EFI system diagnostic and memtest86 has errors. I tried with different memory module but got the same symptoms.
Should I change a motherboard?
After replacing the motherboard (systemboard), everything works.
-
After replacing a lost critical system file, I can now initialize & get online, but I have no sound. How can I activate the sound back?
original title:. Its Windows XP problemHi Delno,
I suggest to check the connection of the wires to the speakers and then follow the steps in the article.
No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
Let us know if that helps.
-
I got an old macbook pro version osx.6.8 and that you want a version of photoshop that I can use on it, but after searching the Internet, I am completely confused. Can you help me?
It's so old, that I doubt you'll have something to work on it which currently does not work.
PS must be prior to version 3.
-
If you can help w/drive, BSOD &; no win startup after update
I've been running the drive (4.0) Win7-64, with Win7-32, installed in the drive. I started having an error of memory via a specific program, while I have not ever one in the host OS (Win7-64). So I saw there's a 4.02 and installed... same error memory. Then I noticed there were a bunch of Win7 updates, that I did not. Hoping that would solve the problem, I installed the updates. To restart, he had a BSOD based on FTDIBUS. SYS. I would like to share in a version checked this, but Win7-32 does not start in the player window. When I try to install the player tools, I can't - you need to BONE up and running first. Someone know if there is a solution, or do I have to Kiss this goodbye content VM? (Thanks for any help you can give)
Rich
A "note:" thanks for the help. I have finally got rid of VMWare and just install another copy of Windows. It was for a therapeutic critical application and should have its own installation of Windows in the first place.
Try to insert the disc to install Windows 7 on the virtual machine and do a repair.
-
Age of Empires II crash with error 'can't initialize graphics system' on Windows XP SP3
Hello world.
I would like to start by saying that is it supposed to be in section games XP, well that is it has been deliberately redirect here, or there is a bug somewhere in social.answers, so do not blame me: P
In any case, I decided to install AOEII today. After installing it, I have updated to 2. 0, then I tried to run. It crashed with an error starting with «can't initialize graphics system...» ", with nothing very useful after that. Nothing in the case where the viewer will appear, I have no choice but to click on ok and close the game. This happens right after that it looks like my CRT resolution changes and before the video intro begins.
I have Windows XP Home Edition SP3, with a nvidia Geforce FX 5500 w / 128 MB of memory onboard (1 GB system). For my graphics card drivers are updated to 175,19, and I just tried to update Direct X end-user running, nothing new in this field.
If anyone can help, that would be great. (Also, to save us from evil, I already ran DirectDraw diagnosis, but also completely remove and then reinstall my graphic drivers.)
PS is it just me or there's a lot of people having problems with this game?
It seems that the installation and launch of the expansion rather than the basic game pack seems to work.
Thanks for helping anyway, so :)
-
Need help to solve problems on iPad Air2 after updating iOS 10
Hey guys this is my second post in the forums of the iPad on the same issues - have not been able to sort them yet Dazs.
(1) my iPad can't Touch ID even after the restoration of the aircraft there was "failure to put in place Touch ID error" and whenever I turn on the Tablet I get a notification that says: «cannot activate Touch ID on iPad»
When I go to settings to set a new mark I simply get an NDR regardless of switching Touch ID access power (iTunes/App store + phone unlock) as support interviews suggest.
2) there is a general delay in the camera, the on/standby button does not respond as it used to, and especially when I turn on the iPad must be 2min30secs to get switched on - I timed it actually! Before the update simply took 15 seconds, my old laptop powers on more quickly than my iPad now!
I restored my iPad, and while all the other functions work with delay however, but these two big things are bugs me a lot. They are not resolved after the restore the device.
How to solve these problems please help!
Here is the error I get when I try to configure the contact ID.
This is the error that I get whenever I turn on the unit.
And iPad takes so long in power! Record the time more myself!
-
Satellite L650 - 10 M - webcam can't initialize
Hi all
I have a serious problem with my Camera / Webcam Toshiba Satellite L650 - 10M, it works sometimes and sometimes it doesn't, sometimes when I start the computer the msg comes "Web camera can't initialize' and sometimes it starts to work by himself and still sometimes when I start, it starts to work, but after awhile once again the error comes and it stops working.
I went to service center, I don't know what they are doing he started working, but as soon as I come home, he stops working, I contacted them and they say there is no problem, I don't know how to tell them that there is a problem, I do not know if its hardware or software issues , but it can someone guide me to fix it permanently.
Hello
How about reinstalling the software of the webcam?
Remove the previous installed webcam software, the operating system using CCleaner, reboot, cleaning unit and install the new downloaded software.
You can download it from the page European driver Toshiba. -
Original title: can someone help me get my pc working correctly after let someone who was a worker for the business of software known remote it support.
I have several problem with missing files, there are things planted by avast 5 in other files that are activated by clicking on it. much of this was caused by my incorrect settings lack thinking I knew what I was doing. Can explain in detail all the problems. I don't know that I need a person who knows everything about a pc is no one else than a very well-informed person on this you problem. Today, I noticed there are at least 3 Directors should be 1. There is something more than that, but I am not aware of other problems too? I got 2 programs running at the same time and that's what started most of my problems using malwarebytes and avast5 at the same time, they began to fighting against each other and he was terrible iI almost lost control of my pc, but had luck on my side and get completely wiped out I have learned many things on computers the hard now but need help without any doubt a pro.
I'm moving your question to the Windows XP security, privacy, and the folder user accounts.
You can take the PC to a reputable repair shop.
-steve
-
How can I get the screensaver to stop after a few minutes, while the screen turns off.
original title: computer sleeps
I leave my computer on all night. When I'm done with it for the day, after 5 minutes, the screen saver turns on. How can I get the screensaver to stop after a few minutes, while the screen turns off. What we call that? Sleep is - this Mode? Hibernate? Thank you!
Hi miztex37,
· You want to put the computer in sleep mode?
See the following article to see if it helps.
Microsoft Windows XP - automatically put your computer into standby mode
See also:
Microsoft Windows XP - manually put your computer in sleep mode
-
With the help of Vista on the laptop. Receive 3 updates on initialize to the top & stop. Do not install. Party at 3 x through process 80070002. How to fix? 3 updates failed to install: KB2779562, KB2705219 and KB2722913. Constantly configures updates during startup and shutdown. Takes a long time for the two workers. Can anyone give advice?
To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.Start an command prompt (Start - All Programs - Accessories - command prompt) and typenet helpmsg 2and it will sayThe system cannot find the specified file.Use Notepad to search for FATAL and 80070002 in C:\Windows\Windowsupdate.log. -
Yet once how can I enlarge a photo after analysis he and his photo gallery import?
Hi ClydeVan Slyke,
I suggest you to follow the steps in the article below and check if it helps.
Resize photos in Windows Live Photo Gallery
http://Windows.Microsoft.com/en-us/Windows-Vista/resize-photos-in-Windows-Live-Photo-Gallery
I hope this helps!
-
Can not access the updates after clean install of Windows 7 Pro
I have formatted my hard drive digital, preformed a clean install of Windows 7 Pro. Everything went well and OS seems to be properly authenticated.
The question is not able to 'find' updates. At startup, the message: NEW UPDATES AVAILABLE. When I check the updates, the process runs "forever" and never completes the process. The problem would be to my use of Office 2003? I have installed for messaging and Outlook calendar. Here's the MGADiag.exe diagnostic tests.
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->
Validation code: 0
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - 96DXD - 3PDHD-FC6KT
Windows Product Key hash: FiWgfb/HBGU plus 7qzKd5NATMcX2iI
Windows product ID: 00371-OEM-9314963-39295
Windows product ID type: 8
Windows license type: COA SLP
The Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {0AC450E6-A3AD-405E-B244-B6074CECBF8A} (3)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Professional
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.130828 - 1532
TTS error:
Validation of diagnosis:
Resolution state: n/a
Given Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002
OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002
OGA data-->
Office status: 100 authentic
Microsoft Office Standard Edition 2003 - 100 authentic
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005
Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowed
Analysis of file data-->
[File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
[File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]
Other data-->
Office details:
{0AC450E6-A3AD-405E-B244-B6074CECBF8A} 1.9.0027.0 6.1.7601.2.00010100.1.0.048 x 64 *-*-*-*-FC6KT 00371-OEM-9314963-39295 8 S-1-5-21-323565687-595391911-2700631585 Dell Inc.. Latitude D630 Dell Inc.. A16 20090714000000.000000 + 000DE083907018400FA 0409 0409 Mountain Standard Time(GMT-07:00) 0 3 DELL M08 100 100 Microsoft Office Standard Edition 2003 11 qQgWhuDYJMzZ2Ra9gyv5SUkXuJA = 70141-051-9705975-56000 1 960A2760EC8D866 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514
Name: Windows 7 Professional edition
Description: operating system Windows - Windows (r) 7, channel OEM_COA_SLP
Activation ID: da22eadd-46dc-4056-a287-f5041c852470
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00371-00186-149-639295-02-1033-7601.0000-0102016
Installation ID: 001986425316033083061411071895367413981866374930874720
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: FC6KT
License status: licensed
Remaining Windows rearm count: 3
Trust time: 25/01/2016 10:58:11
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Not registered - 0 x 80040154
The admin service: not registered - 0 x 80040154
Output beyond bitmask:
--> HWID data
Current HWID hash: NgAAAAEABAABAAIAAAABAAAAAwABAAEA6GGi4iOfPAyIevyQRoOYoLzXkIWCAxbA4Klv5iqF
Activation 1.0 data OEM-->
N/A
Activation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes
Windows marker version: 0x0
OEMID and OEMTableID consistent: Yes
BIOS information:
ACPI Table name OEMID value OEMTableID value
REFERENCE DELL M08 APIC
FACP DELL M08
HPET DELL M08
MCFG DELL M08
ASF! REFERENCE DELL M08
TCPA
M08 DELL SLIC
SSDT PmRef CpuPm
Thank you in advance for any help you can provide.
Firecracker.DWR
You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:
How to reset the Windows Update components
http://support.Microsoft.com/kb/971058
Suggest you download and save the Fixit. Then configure the system before the clean boot by running:
How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7
http://support.Microsoft.com/kb/929135
Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.
I suggest before you stop and install the updates, disconnect from the Internet, first.
I also recommend that download you and install Service Pack 3 for Office 2003, then look for updates in the Help menu.
-
Help, please! Cannot access the web after connected to the VPN
Hello
I'm a newbie on Cisco products. I configured a Cisco ASA 5505 with VPN firewall. However, I can't access the web after I connected to the remote IPSec VPN. I also cannot connect to the bands using the intellectual property. But I can connect to the internal servers in the office with no problems.
Here is my setup, can someone help please? Thank you very much
ASA Version 8.2 (5)
!
host name asa
xxxxxxxxx.com domain name
enable the encrypted password xxxxxxxxxxx
xxxxxxxxxxx encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.1.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address dhcp setroute
!
passive FTP mode
area of zone clock - 8 schedule
clock summer-time recurring PDT 1 Sun Apr 02:00 last Sun Oct 02:00
DNS lookup field inside
DNS server-group DefaultDNS
Server name 107.204.233.222
name-server 192.168.1.3
xxxxxxxxx.com domain name
inside_nat0_outbound list of allowed ip extended access all 192.168.1.96 255.255.255.240
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
IP local pool sc-192.168.1.100 - 192.168.1.110 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global 1 interface (outside)
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 1 192.168.1.0 255.255.255.0
NAT (inside) 1 0.0.0.0 0.0.0.0
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
Enable http server
http 192.168.1.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint _SmartCallHome_ServerCA
Configure CRL
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH 192.168.1.0 255.255.255.0 inside
SSH timeout 5
Console timeout 0
interface ID client DHCP-client to the outside
dhcpd outside auto_config
!
dhcpd address 192.168.1.5 - 192.168.1.36 inside
dhcpd dns 107.204.233.222 inside the 192.168.1.3 interface
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
internal strategy group xxxxxxxx-sc
attributes of xxxxxxxx-sc group policy
value of 107.204.233.222 DNS server 192.168.1.3
Protocol-tunnel-VPN IPSec
XXXXXXXXXX.com value by default-field
xxxxx xxxxxxxxxxx encrypted password username
Strategy Group-VPN-xxxxxxxx-sc
remote access to tunnel-group xxxxxxxx-sc type
attributes global-tunnel-group xxxxxxxx-sc
address sc-pool pool
Group Policy - by default-xxxxxxxx-sc
tunnel-group xxxxxxxx-sc ipsec-attributes
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
call-home service
anonymous reporting remote call
call-home
contact-email-addr [email protected] / * /
Profile of CiscoTAC-1
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:5c1c99b09fb26fcc36a8bf7206af8e02
: end
Hello
Try adding the following commands
permit same-security-traffic intra-interface
NAT (outside) 1 192.168.1.96 255.255.255.240
Is there are always problems with VPN then I would maybe change VPN pool to anything other than something that comes into conflict with the LAN.
In this case, these configurations should do the trick
In order from top to bottom, they would do the following things
- First remove the pool VPN and VPN configurations
- Then remove the VPN pool
- Remake of the VPN Pool with different network
- Reattach the VPN pool for VPN configurations
- Configure NAT0 to the new cluster of VPN
- Remove the old line of the ACL of the configuration of NAT0
attributes global-tunnel-group xxxxxxxx-sc
no address-sc-swimming pool
no ip local pool sc 192.168.1.100 - 192.168.1.110 mask 255.255.255.0
IP local pool sc-192.168.2.10 - 192.168.2.254 mask 255.255.255.0
attributes global-tunnel-group xxxxxxxx-sc
address sc-pool pool
inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.2.0 255.255.255.0
no access list inside_nat0_outbound extended permits all ip 192.168.1.96 255.255.255.240
Of course you also have the NAT configuration for VPN pools new Internet traffic
NAT (outside) 1 192.168.2.0 255.255.255.0
Please rate if the information has been useful if this resolved the issue as mark responded.
-Jouni
Maybe you are looking for
-
It was a triangle button, which provided a drop-down list of my most recent history within a site. Very convenient, esp for slide shows if I wanted to return to a slide that was 10-12 rear blades.
-
I've just updated to Android 6.0.1 yesterday evening and I realized a lot of things has changed. I can't access my store apps on the SD card in Android 5.1.1. I was able to move apps to the SD card on 5.1.1 to free internal memory. Update Marshmallow
-
Z30 Blackberry blackBerry 10 software update
Phone took 3 hours. to make the 10.3.2.556 update yesterday. now, every time you "wake up" or coup use anything on the phone, the screen is enlarged - very annoying! I have to use fingers and pinch the screen to see all items. Can someone tell me
-
Are there any drivers for the canon digital rebel eos 300 d for Windows 7
Are there any drivers for the canon digital rebel eos 300 d for Windows 7?
-
BlackBerry Torch Blackberry Smartphones getting wet in the rain
Hello I write this on my Blackberry Torch 9800 well wet in the rain and since has stopped working. I bought in Dubai, but I live in Greece. According to my knowledge is considered as there is no Blackberry dealers or shops in Greece. Can you please s