Help me I have windows xp pro that I lost my games that I have that those who say internet

Similar Questions

• Had problems with Windows 8 Pro that I bought after the pre version, seems when I tried to reinstall it, kept getting no configure after installation.

  Had problems with Windows 8 Pro that I bought after the pre version, seems when I tried to reinstall it, kept getting no configure after installation.  So I tried a full install without success.  Can you please give some tips to overcome this problem?  I lost the back upward with the resettlement, don't know how, but I have a QuadCore intel 9650 memory of 8 GB, 560 GTX GPU, 120 GB SSD.  Can I install windows 7 ultimate, but I prefer Windows 8 Pro and don't want to pay for it again.

  I suggest you reinstall Windows 7 first, then use your existing Windows 8 Pro key and reinstall Windows 8 Pro from the following link:

  You can download it from there and use your product key to upgrade:

  http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only

  You will need to reactivate by phone:

  Activation of the phone:

  1. press the Windows key + X , and then click run, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• HP Pavilion Slimline s3760in D: need help in Clean install Windows 10 pro 64-bit?

  Hello

  For the past few months I am running windows 10 pro where I had to upgrade windows 8.1 pro 32 - bit windows 10 pro 32-bit. If my system is activated in windows 10 pro and it is authentic.

  

  When I checked in the type of system, it says operating system 32-bit, x 64 processor.  4 GB RAM only 3.12 GB of RAM is usable.

  This means that my processor supports 64-bit operating system. That's why I intend to clean windows install 10 pro and install the 64-bit version so that I can use all 4 GB of RAM.

  That's why went into a tool for creating media and downloaded Mediacreation Toolx64 but when I try to launch the app it shows error "this app cant run on your pc. But Mediacreation tool for 32 bit gently. According to me, given that my current OS is 32-bit so mediacreation toolx64 is not running.

  So I was wondering if I run 32-bit tool mediacreation and choose 'create multimedia installation for another pc' and chosen architecture (32-bit and 64-bit) times, then the clean installation of windows pro 10 OS will I have the option to choose between the version 64-bit and 32-bit version?

  [2] already my windows 10 pro is active in 32-bit version, I get a product key error when I clean install 10 pro for the 64 bit version of windows?

  [3] will be my windows 10 64-bit pro is activated? Since my windows 10 pro turned in a 32-bit version.

  Microsoft memo said "Your PC will activate online automatically as long as the same edition of Windows 10 has been activated successfully on this PC using the free Windows 10 upgrade offer."

  HI Varadar,

  You're right, you choose the installation program of the media creation tool that corresponds to your current system, but create a support for another PC and select 64-bit or both.  I would choose 64-bit.

  Yes, what you plan should work.  Once you have upgraded to Windows 10 32 - bit and Windows checked 10 32 - bit is set, you can use Media Setup to switch to Windows 10 64 - bit.  But... I could ask you to wait a month.  It was reported on the sites a Updatefor Windows 10 is expected in November.  This update will include some changes and corrections that we have already published to our group of insiders test.  The recent blog post is hereand scroll to the bottom of reading on the Activation stuff.  We also wrote about the changes, including the news of your task in our own forum.

  What do you think should work now today, if there is no problem or bug there is no backup.  But if you wait a bit, then the backup as explained will use your Windows 8.1 Pro key into your HP motherboard.

  I hope this helps,

  Charles

• audio player on windows XP Pro THAT has been disabled. How to activate?

  audio driver Windows xp pro has been disabled. How to activate?

  Hello

  I think that Dave may have forgotten to link the actual instructions:

  No sound in Windows

  hope this helps,

  B Eddie

• need help I need a windows xp pro service pack 2 which is compatible 32 win

  my computer crashed, I lost eveything I say well all service packs went... I want to install a windows xp service Pack2 pro, but when I tried I got a message at the end saying that it was not a win 32 app... I don't know a lot about the service packs and app win 32. then I need to know who will be able to be installed on my pc... Thank you...

  Hi, Laurie,.

  The best way is to try to go through Windows Update:

  http://www.windowsupdate.com/windowsupdate/v6/default.aspx?ln=en-us

  Service Pack 2 for Windows XP Professional, x 64 Edition

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=17791

  How to know if you have a computer x 32 or x 64

  http://www.ehow.com/how_5882925_tell-x32-x64-computer.html

  You will find download links here - how to obtain the latest Windows XP service pack

  http://support.Microsoft.com/kb/322389

• Need help, can't activate Windows 8 Pro on HP 3125

  I got a netbook HP 3125 which has an AMD E2 APU, 4 GB ram, 320 HARD and Windows 8 Pro disc and would use for about a month and well. Recently, I decided to update my ram and anything by doing this, I also decided to upgrade to an SSD HARD drive.

  I changed the HARD drive out and installed the SSD, but the BIOS doesn't detect so I disabled the Secure Boot, boot enable Legacy and then proceed to installing a custom installation of Windows 8 Pro using a USB key.

  After installation, it asked me a product key, which I find it weird because Windows 8 does not come with product key labels, since it is built into the bios.

  My problem is, how do I activate my Windows 8 Pro, when it keeps asking me for a product key that I don't have?

  Also, I noticed in the BIOS, it is sometimes called 'Key to load HP factory default', but I can only do this when secure startup is enabled.

  Embedded product key Windows 8 has something to do with the secure boot, for example, if the Secure Boot is disabled, then Windows 8 will not activate?

  Thank you

  Woot! I got it to work!

  Secure boot has nothing to do with the activation of Windows 8 or not with the COA embedded (product key) which is in the bios.

  Here's what I did, just note that this method may not be appropriate measures, but it still works. And different systems configurations, may require different or additional measures. Also, this method may or may not work with all systems.

  for example, the brand or the system you may or may not work with the steps posted in this thread.

  If you have a Windows 8 with a product key that is located on a sticky label, this does not apply to you. It's only for those who have purchased a brand name with Windows 8 system, and it does not come with a sticker product key.

  Components used in this tutorial

  -3125 Netbook HP: AMD E2/6 GB/Intel of the Commission 330 120 GB SSD/F27 bios (later at the time of this tutorial)

  -Microsoft Windows 8 Professional 64-bit (original) disc

  -SATA to USB 3.0 adapter

  -Lite-ON SATA DVD Writer

  1. turn on the system and press F10 to go into the Bios

  2. in the bios, go to trial system > Boot Options

  3. go to Secure Boot and disable it

  4. Select clear all Secure Boot key and enter the 4-digit confirmation code

  5. then go to support HP Factory Default Keys, select it and press Yes

  6. save the Bios and output

  7. Press F10 and return in the Bios

  8. go to the System Configuration > Start Options

  9. select Legacy Support and activate it. A warning message appears, saying that this may cause the operating system to boot, just ignore it and press Yes.

  Now you should see the following text:

  Legacy support = on and key = registered platform

  10 save the Bios and output

  11 insert the disc of Windows 8 for the DVD player and release the boot drive order by pressing F9

  12. the driver, select start from the EFI file and press on enter

  A window opens, showing the HDD/SSD and DVD player with a unique code next to each hardware device

  13. Select EFI sector DVD and press ENTER.

  14. then select , , Bootx64.EFI. After that it will be white and then asked at the start of the DVD.

  15. Press any key to boot from the DVD. If it's done correctly, you will see a HP start-up logo

  16. once the DVD has finished initializing, will appear on the screen of configuration of Windows 8. Click next

  17. accept the EULA and then select custom installation

  18. create a new partition on the disk that you want to install the operating system.

  Note: Windows will create 3 additional partitions, as well as for the installation of the OS. What makes the drive as GPT.

  19 install Windows 8

  20. after the installation and customization of personal settings. Go to control panel > system and you will see

  Windows 8 is activated.

  You can either enable or disable Secure Boot in the bios, as it has no effect on the question of whether or not the operating system will boot. I tried the two enable Secure Boot and disabled, the two parameters allows me the startup of the operating system.

  As Intel 330 SSD, I got two of them and both have no problem running Windows 7 or Windows 8.

  ACHI is necessary if you want to enable TRIM that optimized the SSD automatically when you have to.

  If the TRIM does not work, then it must rely on a Garbage Collection.

  To turn off the SSD on Windows 7, schedule defrag because this will reduce the life expectancy of the SSD

  Windows 8 should because it will recognize if it of a SSD or not. If this is the case, then it will send the TRIM command.

• I need help to connect my windows 7 pro PC to a windows 2008 Server...

   
  Two points of connection here.
  Server: Windows Server 2008
  Client: Windows 7 Pro Edition.
  Client used to connect to the server so that the server was located on the customer network drives. They are connected to the same hub via ethernet and wifi (PC has to a connection wifi and ethernet to same hub).
  Customer will not see the server on network
  Server does not see the Client subnet.

  Try this:

  Navigate to the following location:
  Control Panel\All Control Panel Items\Network and sharing Center\Advanced sharing settings
  
  Select the options as shown in the image above, then click on save changes. Try this in Server computers and client.
  If the problem persists, answer here.

• I found a few applications that say "Download" and some who say 'try', are those who say 'Download' included in the price of photoshop cc tha?

  I found a few applications that read download and other who read try .are those who read the download I've included photoshop cc?

  TColby682 only Photoshop and Bridge are currently included in Photoshop request unique subscription.  You can find more information about how to install the Adobe Creative provided with your membership to Creative Cloud applications help | Install, update, or uninstall applications.

• I am using windows 7 pro that my Skype was working withou any problem now Skype would not connect and I got a message saying outside the system resourses help

  I use windows 7 Professional now my Skype was working with windows 7 Home premium, when I went to W 7 PRO, everything was ok he continue to work and that was three months ago now, this morning, it wouldn't connect and a window came to say that he's out of system resources, and I don't understand

  Try going back to when it worked.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
  http://support.Microsoft.com/kb/936212/#appliesTo

  You use the latest version of Skype?

  Technical issues & using Skype
  https://support.Skype.com/category/tech/;JSESSIONID=4E8285AB5B23BE17D96D57F0C021F032

  Alternatively, you can try the Skype Forum.
  http://community.Skype.com/T5/English/CT-p/English?profile.language=en

  Skype on system resources?
  http://community.Skype.com/T5/general-discussion/Skype-out-of-system-resources/TD-p/396509

  You can try to uninstall Skype and put it back.

• HP Compaq 6000 Pro AT492AV: Serial Port PCI Driver help - HP 6000 AT492AV Windows XP Pro

  Due to former software compatibility issues, I run Win XP on my computer HP Compaq 6000 Pro AT492AV.  I installed a new copy of XP OEM and have solved all driver except for 2 problems:

  (1) PCI Serial Port, here's the info from Device Manager:

  PCI serial port

  PCI bus 0, device 3, function 3

  PCI\VEN_8086 & DEV_2E17 & SUBSYS_3048103C & REV_03
  PCI\VEN_8086 & DEV_2E17 & SUBSYS_3048103C
  PCI\VEN_8086 & DEV_2E17 & CC_070002
  PCI\VEN_8086 & DEV_2E17 & CC_0700

  (2) unknown Device, here's the info from Device Manager:

  Controller of Interface LPC Intel(r) ICH10D - 3A1A

  ACPI\IFX0102
  * IFX0102

  I'd appreciate any help you can provide!

  All the best

  Hello:

  You need these drivers for devices...

  1.

  This package contains the Intel Local Management Service (LMS) and the support of Serial - over - LAN (SOL) for Intel Active Management Technology (AMT) for the supported desktop models and operating systems. This software is part of the Intel Digital Office Initiative.

  FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45367.exe

  2.

  This package provides the device driver for the Infineon Trusted Platform
  Module (TPM 1.2) in office supported running models taken Microsoft support
  Windows XP operating system.
  
  FTP://ftp.HP.com/pub/SoftPaq/sp40501-41000/sp40553.exe

• I just want to get the load down, so I can move to windows 7 Pro that I just paid for. I can't believe that it should be this difficult.

  I have a key for download. I just want to get the load down, so I can move to windows 7 Basic windows Pro 7 I just paid for. I can't believe that it should be this difficult.

  Why couldn't there was a link on the confirmation e-mail to download the program.

  You can use the product key and the Basic Express in Windows 7 Home Edition upgrade upgrade to Windows 7 Professional.

  If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade from Windows 7 Home Basic to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

• Need help for error 1719 Windows Installer Service could not be accessed. Your personal contact to check who is properly registered and checked?

  I bought a new Netgear Dual Band Wireless USB adapter N - 900 and I can't get the thing to install because the error 1719 Windows Installer Service could not be accessed.  Contact your personal assistance to check that it is properly registered and activated.  Can someone out there help me understand what I need to do?  I am completely lost and have been for three days.  Please help me!

  Hello

  1. are you able to install other programs?

  2 have you made any changes to the computer before the show?

  Method 1: Run the fix - it in the following article: fix problems with programs that cannot be installed or uninstalled:

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  Method 2: Start the Windows Installer service

  See the following steps:

  a. click Start, type Services.msc and press {ENTER}
  b. double-click Windows Installer
  c. set the startup type of Windows Installer to automatic
  d. Click Start to start the service. Note the error message, if any.
  e. click OK.

  Method 3: Unsubscribe and re - register the Windows Setup program.

  See the following steps:

  a. Click Start, click Run, type MSIEXEC /Unregister. and then click OK.

  Note: Even if you do it right, it may seem that nothing is happening.

  b. Click Start, click Run, type MSIEXEC/REGSERVER and then click OK.

  Note: After you run this command, the operation is complete.

  c. try your application based on Windows Installer again.

  Method 4: SFC scanner.

  Analysis (sfc) System File Checker will replace the missing or corrupted system files on your computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929833

• Windows xp pro 3-horse of Trojan virus proctection unable to fix, can not access internet.

  I reboot disc but do not know how to use it.  can someone help me?

  It will start in safe mode / networking and go on the internet? If it can get into normal windows get this, then run it. It will kill any process malware

  Then get trojan remover run, update then click scan (that is if it works). Then select all the options in the Utilities menu

• Windows 7 Pro x 64 lost the key

  I formatted my PC and I lost the key, I have the packaging, but not the sticker containing the serial number that it was placed on an old PC, I have all the serials and codes; How can I get the key?

  If you have lost it, you can buy a new.

  You can find software OEM System Builder of dozens of online merchants. The current price for OEM Windows 7 Professional Newegg, for example, is $ 140. When I checked a few minutes ago, Amazon offered packages OEM Windows 7 Professional from several vendors at prices ranging from $ 101 to $ 150. When I checked earlier, a package specifically designed for reconditioned PCs cost only $ 50 for a 64-bit copy.

  There is no technical limitation to prevent you from using OEM software on your computer, although this software only works for a clean install, not an upgrade. In the past, Microsoft has been remarkably inconsistent in his advice to clients on the question of whether this practice is allowed. (See "is allowed to use Windows OEM on your own PC? Don't ask Microsoft. »)

• Old system Windows 7 Pro has suddenly lost Activation

  A Workstation Windows 7 established for a long time suddenly announced that it is not running Genuine Windows. It's a Dell workstation and it has been activated for a period of time. The MGA diagnosis shows that the license is genuine, but the rest of the system somehow no longer sees it. What can I do to fix this?

  Here are the Diagnostic output:

  Diagnostic report (1.9.0019.0):
  -----------------------------------------
  Given WGA-->
  Validation status: genuine
  Validation code: 0

  Cached Validation code: n/a, hr = 0xc0000022
  Windows product key: *-* - M3DJT - 4J3WC-733WD
  The Windows Product Key hash: xo + ajVSpae7/4VoZjS7m6JL0f3A =
  Windows product ID: 00371-OEM-8992671-00524
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {2A79B2BD-BCE9-49C2-9B7F-5C7B17B9197C} (1)
  Admin: Yes
  TestCab: 0x0
  WGA Version: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0x00000000
  Build lab: 7601.win7sp1_gdr.150113 - 1808
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: FCEE394C-458-80070005_025D1FF3-344-80070005_025D1FF3-229-80070005_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files\Google\Chrome\Application\chrome.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7601.17514]
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7601.17514]
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385]
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7601.17514]
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385]
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385]
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7601.17514]
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7601.17514]
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7601.17514]
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385]
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7601.17514]
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0]
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7601.17514]
  [File mismatch: C:\Windows\system32\en-us\user32.dll.mui[6.1.7601.17514]

  Other data-->
  Office details: {2A79B2BD-BCE9-49C2-9B7F-5C7B17B9197C}1.9.0019.06.1.7601.2.00010100.1.0.048x 32*-*-*-*-733WD00371-OEM-8992671-005242S-1-5-21-2896429414-2587603259-3714980780B7AD3E07018400F804090409US Mountain Standard Time(GMT-07:00)13DELL B10K 109

  Content Spsys.log: 0 x 80070002

  License data-->
  On a computer running Microsoft Windows non-core, run ' slui.exe 0x2a 0x1A8' to display the error text. "
  Error: 0x1A8

  Windows Activation Technologies-->
  HrOffline: n/a
  HrOnline: n/a
  Beyond: n/a
  Event time stamp: n/a
  WAT Activex: registered
  WAT administration service: registered

  --> HWID data
  Current Hash HWID: NAAAAAEAAwABAAQAAAABAAAAAQABAAEAeqj0XMS0qnbK5z52jOWkC6wrLFHOcLK0Zs9Gyg ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC DELL B10K
  FACP DELL B10K
  HPET DELL B10K
  STARTING DELL B10K
  MCFG DELL B10K
  SSDT DELL st_ex
  TCPA DELL B10K
  _ DELL B10K
  DELL SLIC B10K
  SSDT DELL st_ex
  SSDT DELL st_ex
  SSDT DELL st_ex

  This can result from the setting by mistake the folder System32 and its contents to the status of "read only".

  Open Windows Explorer (computer)

  Browse to C:\Windows folder

  Find the System32 subfolder and right-click on it

  Select Properties

  Clear the "blob" in box "read-only (applies only to files in the folder)" by clicking on it until it is white.

  Click on apply.

  Make sure the radio button for "Apply changes to this folder, subfolders and files" is defined, and then click OK.

  Accept the administrator command prompt. After a few seconds, you will be told there is an error - click on the button "ignore all".

  Wait for it to finish - it might take a few minutes.

  Out OK and exit Windows Explorer.

  Reboot twice

  Post a new report MGADiag.