Help! Mode D

Similar Questions

• Cannot get the account information for a company while firefox is in help mode

  What is happening with my e-mail provider. I sign for the account, but no information appears. Their tech support trying to figure out, but nothing has worked. I've refreshed Firefox and using safe mode, I could then get the account. What is going on?
  Thanks in advance for any help on this

  Thank you very much. It has proved to be an extension of my Webroot anti-virus filtering. I disabled it and everything is fine.
  Thank you for your help

• redemption code help

  How can I use my Adobe CC code even after getting help in Adobe case update still does not work?

  [Moved from the Lounge Forum somewhere you might actually get help - Mod]

  Hello

  Redemption Code http://helpx.adobe.com/x-productkb/global/redemption-code-help.html

  - and https://forums.adobe.com/thread/1572504

• Why the Adobe help Manager does not close?

  I don't know what is the "Adobe help Manager" (ridiculous name). I noticed as an open application in my toolbar (Windows 7), but you cannot close it. There's just there. Only goes away when I rebooted my system. Ideas or comments?

  In General, I would like to comment that many of the current Adobe programs (including CC) are nowhere near as intuitive as it should be. You lose a bit of time trying to find a way to fairly obvious functions. Usually will have to go online to find an answer. Should be clearer and more obvious. The interface of CC (to download the work files) seems a 'clean' design Yes, clean... and little intuitive.

  Adobe Help Manager is an application that allows you to manage files in Adobe help mode also online & offline.  In other words, when you open any adobe application and search for online help, this Adobe help Manager is responsible for the management of people.

  He will stay on the notification bar whenever access you adobe online help.

  You can close it by right clicking on it and choosing "output CHCi. But don't forget, it will once you choose to use the help of adobe.

• elitedesk 800 does not wake from sleep, performed a start rather

  HP EliteDesk 800 G1 USDT Win8.1 Pro 64-bit

  After the sleep mode to not wake up the keyboard or mouse click.

  Pressing the key Power performed a clean boot from the stop.

  Computer came with Windows 7 Pro. I installed Windows 8 since the disks provided with the computer and improved online at Windows 8.1. Everything seems to work fine, but the modes of Eve/hibertation.

  By pressing on a keyboard or screen sleep button apparently sends computer standby: the screen is black, white power button mouse and keyboard LED off, LED blinks once every two seconds.

  However computer not wakes up on a key on the keyboard and pressing a button / a computer turns on, but does boot upward as if it were completely off.

  Already checked for the latest version of the BIOS and enabled for keyboard and mouse power management.

  Hi Jaco,

  Thanks for your suggestion. I tried to experiment with the settings of power for the keyboard and the mouse, and simply made sure that both are enabled to wake the computer from sleep mode. I began to suspect that he may be the controller USB keyboard to wake the computer asleep, and I've experimented with a PS/2 keyboard without result.

  Then I reread in BIOS settings help mode "standby" should be indicated in triple LED flash, and I was getting only single blink of the LED, and I started to look into each option in Advanced settings of the power management and guess what I found?

  THE SOLUTION

  When I turned the sleep > allow hybrid sleep set Off, "sleep mode" started working:

  By pressing on the sleep button sends computer mode 'sleep', white LED travels triple flash and two seconds apart, and by pressing a key on the keyboard wakes the computer.

  Apparently my hardware configuration somehow comes into conflict with the Win8 hybrid sleep mode. SSD?

  HP EliteDesk 800 G1 USDT Core i7-4770 8 GB (2x4GB) DDR3 256 GB SDD,

  DVD +/-RW, keyboard, mouse, GigLAN,

  WIN8.1 Pro 64

  Thanks to all for lead me to this solution!

• Political Replacement CRU does not apply in Slovenia?

  Hello

  I bought a Lenovo T440p in 2014 and last week my drive reports bad sectors HARD early. I took it out and replaced with an SSD.

  I wanted to send the HARD drive for a replacement under warranty to one of the Lenovo official distributors here in Slovenia, however, they told me, I have to bring my laptop and the HARD drive. It is not sustainable for me, because they are 200 km, and they would probably like to keep my computer for 45 days (Warranty replacements are slow here).

  I bought a class ThinkPad business, because I wanted a stable system and guarantee fast and flexible service. According to the CRU replacement policy (https://support.lenovo.com/si/sl/documents/ht031627) T440p disk HARD can be replaced by the customer (https://support.lenovo.com/si/sl/documents/pd029304). I me maintenance computers back in the day, so it was an extra easy and quick repair.

  The point is - I need my computer every day to manage my business and I can't afford that she went for 45 days. However, I want to also only 500 GB HARD drive replaced, because it is under warranty. I'd like your opinion what to do in this case.

  Thank you.

  I received a positive response from Marand d.o.o. I can send the HARD drive only on their spending, and they will send a new HARD drive once they determine that there really bad areas.

  I had an unpleasant experience with ITS interprofessional d.o.o. (LC Unistar) - they were rude, useless and they wanted to have all computer, send it by me.

  Add d.o.o., which is also on the list of service providers, does not service computers ThinkPad, it seems. But they were quite useful to send me a list of official service providers here in Slovenia (which is essentially the same as on https://support.lenovo.com/si/sl/documents/ht100529).

  So, Marand d.o.o. has themsleves a new customer.

  Thanks for the help, mods! I appreciate it.

• draw my sampled data

  Hello

  I am trying to trace my data sampled, but I think I'm doing wrong somethinng.

  I took 1000 samples pf my signal analog to 1Kz, dt = 10, stored in a table and through fft spectrum.vi I tried to plot the data, the frequency of Ampliteude vs. The analog input is a magnetic field meter, I measure my pc for the test field.

  The problem that in my view is the scale of the frequency, my opinion is that the Summit should be 0.05 Hz 50 Hz and not

  I have attached snapshots of my program and my results. could you please check and tell me if I'm doing something wrong?

  Concerning

  Garbage in, garbage out!

  You lie to LabVIEW so its bad data donations as well.

  

  If you read the help for the timed loop, you will see the dt is the source of synchronization units... you are collecting data at 100 Hz.

  Next:

  "dt" for a waveform must be in seconds at 100 Hz the dt should be 0.01 NOT "10".

  Then read the help, mod your code and you should get the results much more resonable.

  Ben

• q * bert does not not on vista

  I bought q * bert on a CD and it said that it is compatible with vista.  After the installation, I get the following error message:

  script error Internet explorer

  an error has occurred in the script on this page

  Online: 6
  Char: 1
  error: can't move focus to the control because it is invisible, not licence, or of a type that does not access the focus.
  Code: 0
  URL: http//127.0.0: 4000/index.html

  do you want to continue running scripts on this page?

  I contacted again help on this and they said it could be a problem with internet explorer, so I upgraded my internet explorer but did not help.  Have also tried all the options of the different compatibility without help mode.

  could you help me on this?

  smileysa1
  ,
  Looks like you do not have a plug for IE that is required to play, at least the version of IE.  Maybe your Flash drive is not the correct version or is not registered as an add-on with IE?  Have you checked the q * bert site here http://support.encoreusa.com/product.asp?id=2466 support?  The party "cannot activate control" error means that something is not correctly with IE - more likely an add on like Flash or Java.  Check your addition on Control Panel in Internet Explorer to ensure that all ons add that you need to run this game are here and activated.  To do this in IE 8, go to tools > Manage Add ons.  You can check the requirement for the game at the still site support link above.

  Let us know if we can provide assistance.

  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to install the WPA2-aes security on old router Wrt54G ver 6

  I need help mode WPA2 on my router, I got this router WRT54G ver 6 for several years and it works perfect only thing is that I have no security my nwireless can help them a whole? would be ppreciate it. Thank you

  Your router has the option for WPA2 Personal. You need to access the router interface so that you can select this type of security.

  Please click the link below and it will give you steps how to configure security wireless with your router:

  Title: setting up wireless security WEP, WPA or WPA2 on a Linksys ID of Article wireless router: 19073

  http://www6.nohold.NET/Cisco2/UKP.aspx?pid=80&VW=1&articleid=19073

• There is not enough free memory to run this program. Quit one or more programs and then try again

  can someone help me?

  I can't open the main folders such as documents, etc. I can't open the control panel. Repeated me error Explorer.exe there is not enough memory to run this program. Quit one or more programs and try again. Then, the audio has an x mark, that even with the internet icon has an x mark but I can use the browsers and the internet.when I click on brand x audio it is said that the audio service is not running, I think it happened after that I editing the permissions on the registry key for visual basic 2010. anyone from microsoft, please help.

  The same thing happened to me, and finally I found the solution, you're right, it's a registry Permission problem, what I tried and did not help:
  -Mod safe - the same error
  -Antivirus Live CD (Nothing found)
  -Restore a backup of the registry - not worked
  -Even worse, it is impossible to install software

  And here is the solution:
  1. start a command as administrator prompt
  2 copy and paste Foollowing code and press enter

  secedit/configure /cfg %windir%\inf\defltbase.inf/db defltbase.sdb / verbose

  3. reboot your system

  For more information, please visit my Blog (it's not in English)

  http://www.Sordum.NET/16937/Windows-Explorer-e-tiklandiginda-yeterli-Bos-bellek-Yok-uyarisinin-cozumu/

• Age of Empires blurred graphics

  I have the original disc for AoE I in good condition and it installs and runs without a problem, but the graphics are all blurred and distorted. The playing surface is also a really small box in the middle of a big black screen. I never had NO problem running the game because it came out and I played on Win 95, Win 98 and XP machines.

  My current PC is:

  Intel Core i7 2600K 3.40 GHz @3.8 GHz overclocked

  8GB Corsair Vengeance PC3 2133 MHz DDR3 RAM
  AMD Radeon HD 7970 3072 MB
  Dell U2410 24 "1920 x 1200 widescreen flat panel
  Windows 7 Home Premium 64-bit

  I really like this game. Explorer disabling is not good, and no compatibility help modes at all. It's all simply unplayable, which is a real shame.

  How the graphic problems and allow a higher resolution for the game?

  Thank you very much.

  I fixed it!

  It's SO simple, I am completely ashamed of myself, although I do not understand why this seems to have been posted ANYWHERE on the entire internet!

  The problem was that my graphics card has been configured for the quality settings higher in order to play 3D games world opened as Skyrim.

  Intel Core i7 2600K 3.40 GHz @3.8 GHz overclocked

  AMD Radeon HD 7970 3072 MB
  Dell U2410 24 "1920 x 1200 widescreen flat panel
  Windows 7 Home Premium 64-bit

  All I had to do was go in catalyst and save all my usual settings in a predefined profile called NORMAL.

  Reduce ALL the parameters of anisotropic filtering, Anti-Aliasing and ALL other settings for the LESS POSSIBLE then use application settings if necessary, apply these settings and then save them to a predefined profile called "Age of Empires".

  So now I can click on my profile predefined for AoE, it changes the settings of the card, start the game and it plays perfectly.

  Then I can change whenever I like it in my NORMAL preset.

  QED.

• GPSDemo

  Hello everyone. In the setcostAllowed() GPSDemo is set to false, does that mean that the app does not any extra data charges OR that it means that the application does not use data at all?

  "Network" mode assisted often has a cost associated with him, according to the carrier.

  If you force "no authorized charge", you will probably get the standalone GPS, which relies on the chipset of GPO and takes some time to get a first fix compared to the network help mode.

• I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please

  I can't reach some websites with any browser. I get the message ERR_CONNECTION_REFUSED. If I boot in safe mode I don't have the issue. I tried the reset and repair of everything. Help, please

  Try to run this program in your usual account, then copy and paste the result in a response. The program was created by Etresoft, a regular contributor.  Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.

  Etrecheck - Information System

• IPod 160 GB Classic is stuck on the apple logo. I have reset several times and I can not put in DFU mode or resets it to take. Done all the help topics that I have seen here and nada... Please help

  help me get the apple logo take off. I reset it, tried and failed to reset. I can't put it in dfu mode. I'm stuck and need help pease. I did everything that was mentioned in other posts similar to this issue.

  That may mean the iPod has a hardware problem, such as a faulty hard drive or the logic board.

  When you do a Reset (press and hold the Menu and Center buttons), going blank at the start before the Apple logo returns the screen to the iPod?  Or do you mean that the Apple logo is 'stuck' and it doesn't go away when you try of the reset?

  Is the "DFU mode" procedure for disc Mode.  Have a look here to confirm that this is what you have tried

  How to put your iPod in disc - Apple Support mode

• lost or stolen iPhone. It is w / 'Find my iPhone', later received email that it has been found. No call and impossible to recover, now phone is in offline mode. I am leasing through the iPhone upgrade program. Help, please.

  6 sec more lost/stolen iPhone. Turned on the 'lost' Mode and displays the number to call if found on-screen. It is w / "Find my iPhone", went up, no response from any home in the area. Later received an email that it was found, still no call to the number on the screen. Several unsuccessful attempts to get it back, now the phone is in offline mode and says that the history of the site is not available. I left a note on all the doors in the place indicated on the "find my iPhone" describing my phone lost and left a number to call. I am leasing through the iPhone upgrade program. Help, please.

  There is no way to locate now, unless the one who found it exerts a force on you contact on this number you posted

  The good news is, since you have find my iPhone, they will not be able to reuse the phone even if they are trying to restore. Unless they know your password, or you have a valid proof of purchase AGFI won't be deleted.

  So if the person who found the phone knows about it, he or she would rather go back because it would be of no use to them.

• Firefox cannot download addons, and Web pages may not load correctly. Safe mode, reinstall clean do NOT help

  So, basically, I've upgraded to windows 10. Everything works great, except firefox. When I loaded the first Win10 I was unable to access the settings of firefox at all. Homepage has been giving an error message, all the sites of firefox support gave error messages and I couldn't solve this problem. I thought that a simple reinstallation would work. First time around, I just installed on it. Here parameters and firefox pages working again, but now I get only half of the page to load. I am also unable to install addons. Since I reinstalled firefox several times by deleting files in the temp, the app data, registry files, you name it. If it is a related file from firefox, it was removed as a result of the pick up and other sites.

  Nothing works... I am degraded using Chrome, which as I recently discovered didn't even flashgot...

  Problem 1) Firefox Web pages not loading properly. Settings, support, addons, etc..
  Problem 2) I can not install addons, probably because of problem 1.

  PS. I searched the site and went through all the tips for safe uninstall mode, but I can't seem to find anything about it. Thank you for your help.

  in case you're an avast user, please try to disable https scanning in avast:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok.

  http://www.gHacks.NET/2014/10/31/avasts-HTTPS-scanning-interferes-with-Firefox-and-other-programs/