[HELP] MovieClip button Stucks after first use!

Similar Questions

• I deleted the creative cloud of the trial and the DM Dream weaver of the trial, after only using it for about 6 days, I tried to re-download the two tests and nothing happens. Anyone know how I can get this done. Please advise, your help will be greatly a

  Hello

  I deleted the creative cloud of the trial and the DM Dream weaver of the trial, after only using it for about 6 days, I tried to re-download the two tests and nothing happens. Anyone know how I can get this done. Please advise, your help will be greatly appreciated.

  Hello

  Also see also software Adobe to trial has expired at the beginning

  Hope that helps!

  Kind regards

  Sheena

• Stuck on "Setup prepares your computer for first use.

  I went through a custom installation of windows 7 upgrade from windows xp and at the end of the installation process, I get the message "Setup is preparing your computer for first use.  my computer has been slain on this screen for hours.  I restarted in safe mode, but it got the same screen.

  Try to repair the Installation of Windows 7
   
  1. Insert the DVD of Windows 7 and restart your computer
  2 boot from the DVD.
  3. choose your language and click Next.
  4. click on repair your computer, select the operating system you want to repair.
  5. click on the link to repair list system in the System Recovery Options recovery tools.
   
   
  If this does not solve it:
   
  1. Insert the DVD of Windows 7 and restart your computer
  2 boot from the DVD. If you are prompted, press any key to start Windows from the installation disc.
  3. choose your language and click Next.
  4. click on repair your computer, select the operating system you want to repair.
  5. Select command prompt and try the following commands (one command might work, or you may need to use several commands according to the exact problem):
   
  Bootrec /fixMBR
  Bootrec /fixBoot
  Bootrec /rebuildBCD
   
  Note: there is a space before the /.
   
  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Why movieclips, buttons & images on the stage literally disappeared when run.

  I'm really noob in AS3.

  I had the design of clips and other places on the stage.

  And I got 1 framework for the code below.

  Some clips will be visible and not visible, sometimes while loading external swf files.

  I think that its on the clips to be dynamically on the stage.

  Error output:

  TypeError: Error #1009: cannot access a property or method of a null object reference.

  at main4_fla::MainTimeline/advantanMCs() [main4_fla. MainTimeline::frame2:141]

  to Function / main4_fla:MainTimeline/launchSWF/main4_fla:onLoadCompleteHandler() [main4_fla. [May nTimeline::frame2:46]

  Here is my code:

  import flash.display.MovieClip;

  import flash.display.Loader;

  import flash.net.URLRequest;

  to import flash.events.ProgressEvent;

  import flash.events.IOErrorEvent;

  import flash.events.Event;

  var swfList: Array = new Array ('1.swf', '2.swf', '3.swf', '4.swf');

  var container: MovieClip = new MovieClip();

  var currentSWF: MovieClip = new MovieClip();

  var swfNo: number = 0;

  function launchSWF

  function launchSWF (swfBox, swfFile) {}

  swfLoader var: Loader = new Loader();

  var swfURL: URLRequest = new URLRequest (swfFile);

  swfLoader.contentLoaderInfo.addEventListener (ProgressEvent.PROGRESS, onProgressHandler);

  swfLoader.contentLoaderInfo.addEventListener (Event.COMPLETE, onLoadCompleteHandler);

  swfLoader.contentLoaderInfo.addEventListener (IOErrorEvent.IO_ERROR, onIOErrorHandler);

  swfLoader.load (swfURL);

  function onIOErrorHandler(event:_IOErrorEvent):void {}

  trace ("file not found!" swfFile + event);

  }

  function onLoadCompleteHandler(event:_Event):void {}

  trace (swfFile + "loaded file.");

  swfBox.removeChild (preLoader);

  swfBox.addChild (swfLoader);

  {If (swfFile == {swfList [0]})}

  swf1MCs();

  currentSWF.x = 247.45.

  currentSWF.y = 251.45;

  {} ElseIf (swfFile == {swfList [1]})}

  swf2MCs();

  currentSWF.x = 62;

  currentSWF.y = 199.50;

  {} ElseIf (swfFile == {swfList [2]})}

  swf3MCs();

  currentSWF.x = 132.50;

  currentSWF.y = 225,50;

  {} ElseIf (swfFile == {swfList [3]})}

  swf4MCs();

  currentSWF.x = 62;

  currentSWF.y = 226.50;

  }

  currentSWF = MovieClip (swfLoader.content);

  currentSWF.gotoAndPlay (1);

  currentSWF.addEventListener (Event.ENTER_FRAME, checkLastFrameHandler);

  function checkLastFrameHandler(event:_Event):void {}

  trace (swfFile + "is the image of '+ currentSWF.currentFrame +'.'");

  if(currentSWF.currentFrame == currentSWF.totalFrames) {}

  currentSWF.stop ();

  removeSWF();

  }

  }

  function removeSWF(): void {}

  swfBox.removeChild (swfLoader);

  currentSWF.removeEventListener (Event.ENTER_FRAME, checkLastFrameHandler);

  trace (swfFile + "deleted.");

  launchNextSWF();

  }

  }

  var preLoader: loader = new loader();

  {If (swfFile == {swfList [0]})}

  preLoader.x = mc1Frame.x / 2;

  preLoader.y = mc1Frame.y / 2;

  {} ElseIf (swfFile == {swfList [1]})}

  preLoader.x = mc2Frame.x / 2;

  preLoader.y = mc2Frame.y / 2;

  {} ElseIf (swfFile == {swfList [2]})}

  preLoader.x = mc3Frame.x / 2;

  preLoader.y = mc3Frame.y / 2;

  {} ElseIf (swfFile == {swfList [3]})}

  preLoader.x = mc4Frame.x / 2;

  preLoader.y = mc4Frame.y / 2;

  }

  swfBox.addChild (preLoader);

  function onProgressHandler(event:_ProgressEvent):void {}

  var dataAmountLoaded: number = event.bytesLoaded / event.bytesTotal * 100;

  preLoader.bar.scaleX = dataAmountLoaded / 100;

  preLoader.percent.text = int (dataAmountLoaded) + "%";

  trace ("preLoader:" + preLoader.percent.text);

  }

  } / / end of launchSWF

  function launchNextSWF() {}

  trace ("launch of the next");

  If (swfNo < (swfList.length - 1)) {}

  swfNo ++;

  trace ("Now Playing" + swfNo + "swf");

  launchSWF (container, swfList [swfNo]);

  } else {}

  trace ("at the end");

  }

  } / / end of launchNextSWF

  put on stage

  addChild (container);

  launchSWF (container, swfList [swfNo]);

  mc swf1 behavior

  function swf1MCs() {}

  mc1Frame.visible = false;

  mc2Frame.visible = false;

  mc3Frame.visible = false;

  mc4Frame.Visible = true;

  headerBg.gotoAndStop("1");

  mc1MC.gotoAndStop("1");

  mc2MC.gotoAndStop ("default");

  mc3MC.gotoAndStop ("default");

  mc4MC.gotoAndStop ("default");

  }

  SWF2 mc behavior

  function swf2MCs() {}

  mc1Frame.visible = false;

  mc2Frame.visible = false;

  mc3Frame.visible = false;

  mc4Frame.Visible = true;

  headerBg.gotoAndStop("2");

  mc1MC.gotoAndStop("2");

  mc2MC.gotoAndStop ("default");

  mc3MC.gotoAndStop ("default");

  mc4MC.gotoAndStop ("default");

  }

  swf3 mc behavior

  function swf3MCs() {}

  mc1Frame.visible = false;

  mc2Frame.visible = false;

  mc3Frame.visible = false;

  mc4Frame.Visible = true;

  headerBg.gotoAndStop("3");

  mc1MC.gotoAndStop("3");

  mc2MC.gotoAndStop ("default");

  mc3MC.gotoAndStop ("default");

  mc4MC.gotoAndStop ("default");

  }

  SWF4 mc bahavior

  function swf4MCs() {}

  mc1Frame.visible = false;

  mc2Frame.visible = false;

  mc3Frame.visible = false;

  mc4Frame.Visible = true;

  headerBg.gotoAndStop("4");

  mc1MC.gotoAndStop("4");

  mc2MC.gotoAndStop ("default");

  mc3MC.gotoAndStop ("default");

  mc4MC.gotoAndStop ("default");

  }

  I kinda stuck with the code. Much of the code I got from a blog I think useful for what I'm working on.

  One thing that bothers me, is that I movieclips, buttons and images on the stage literally.

  When I decide to enter the movieclips disappeared.

  Any help is appreciated.

  The first line in an error message reference is the closest to the problem.  All the others are right along the processing chain, so line 141 is where you need to focus.

  If you get the error 1009 for this line, it is indicating that the mc1Frame object does not exist for which is that the code is... you don't see this object as being present.

  This may mean that the object...

  -is declared but not instantiated

  n ' is not have an instance name (or the name of the instance is misspelled)

  n ' is not in the frame where this code tries to talk to her

  -is animated in place, but is not assigned the name of the instances of each keyframe for her

  -is one of the two or more consecutive keyframes of the same objects without a name assigned in the image previous (s).

• MovieClip buttons

  Hi all
  
  Need a little help from my friends here; Are a really nice touch by using filters in actionScript, apply filters - you must have movieClip. Right, so I have my designed button. Now when I add an onRelease function, the movieClip button loses the effect of color, that I applied to it. How this type of button's function?
  
  I tried placing in within another mc is loader_mc but eventhough the onRelease is applied to the loader_mc, the underlying play_mc works in the effect that I applied through ActionScript.
  
  loader_mc.onRelease = function () {}
  trace ("called onRelease");
  }
  
  The books above, but the button movieClip loses its effect, essentially the onRollOver and onRollOut effect will not work.
  
  I need my movieClip button to keep the filter transitions that I applied, but work like a normal button, make me?
  We can create great onRollOver and OnRollOut effects with movieClip buttons. But when it comes to use to launch funcitons and getURL ect... the effect seems to be lost, know why?
  
  Need a solution, real quick. Sorry to his Candide, but I'm between the hammer and the anvil ;)
  Kind regards
  
  Boxing boom

  Boom boxing,

  > Finally I got my head around it. Like most things in life,.
  > once you have grasped the concept ;)

  There you go! Keep that Chin up. :)

  > The labour code is attached. Quite well done?

  Yes, seems pretty good. The point of principle was to assign the event
  managers outside clip, you did. Event management-
  in particular, scope - is significantly different between AS2 and AS3, as well as
  Once you get your head around the two (as you said), you will be in good
  form. I do not see a slight adjustment I would do:

  play_mc.onRollOut = function (): Void {}
  This.orb_mc.onEnterFrame = function (): Void {}

  In these two lines, for example, the following is in play: first, a
  function is assigned to the MovieClip.onRollOut of a particular event
  Instance of MovieClip, play_mc. Second, the instructions of this function are
  declared. The first action of this function is to assign another function
  in the instance of MovieClip orb_mc. This instance is located inside play_mc.
  Here's the important part: because these instructions are written inside of a
  associated function play_mc, 'this' property, * in this context *,.
  refers to play_mc. That is why the play_mc.orb_mc of reference can be indicated
  by the expression this.orb_mc.

  The MovieClip.onEnterFrame event handler is scope differently. Inside
  This second function, 'this' refers to orb_mc property, because its
  function is associated with orb_mc. Then... when it comes at the end of this
  line:

  delete this.orb_mc.onEnterFrame;

  ... I have that référenceriez like this:

  delete this.onEnterFrame;

  ... because, once again, the term "this" - in this case, refers to the
  mc_orb. Make sense? This definition of scope is different in AS3, but for the moment
  be, remember that the reference to 'this' change of function for
  function.

  I would also be sure to provide a way for the onEnterFrame event
  Manager to be interrupted in all cases, just as it does in the example above.
  Really, there is no reason to let onEnterFrame uncontrolled functions.
  The framerate by default (12 fps), you are performing this function of twelve
  times per second, even after the service has served! Who is asking
  the processor to perform unnecessary calculations and enough of this kind
  things may slow down the Flash content. The onRollOut event handler in the
  function onEnterFrame stops after that he completed his objective (once gf.blurX
  is less than 4), provides a 'out' similar to other handlers.

  Keep in mind, too, that each of these event handlers in play_mc reassigns
  the Manager orb_mc onEnterFrame function. It is possible that fast
  mouse movements could possibly put the blur (or other effects)
  a little out of sync.

  David Stiller
  Co-author, Foundation Flash CS3 for designers
  http://tinyurl.com/2k29mj
  "Luck is the residue of good design."

• LaserJet Pro 200 m251nw: Laser Jet Pro 200 color ink bleed on black and white page after some use

  I print mostly black and white documents. I recently had 2 ink color of defamation in the pages that are supposed to be just in black and white printed. The first was the magenta, and it might discolor the entire page. The second was yellow, and it could fade just the left and right margins. It was two cartridges to Cartridge World, and they have done very well for some time after the installation or always had plenty of ink left when this problem occurred. The manager at Cartridge World has estimated that perhaps the part of the waste of the cartridge has been complete over time and flees to the ink. He said that for most black and white print still causes the drum on the cartridges of color to turn and empty the little ink in waste room. His suggestion was to get a second monochrome printer for most usage of my impression and just this HP product when the color is required. Who is? Other suggestions? If I replace the suspicious cartridges, print returns to normal, at least for a while.

  Hi @la1959,

  Welcome to the HP Forums!

  I see that your HP LaserJet Pro 200 M251nw, color of ink smear on black and white page after some use. I'm happy to help with this problem!

  According to the website of Cartridge World, http://www.cartridgeworld.com, it seems to me that these cartridges are rebuilt (refills). And, the information in this guide, can I refill the ink in my HP ink cartridge? States:

  Yes, you can. But what do you want? QualityLogic, one of the organizations of quality foremost in the world, has tested the performance of HP refurbished vs brand inkjet print cartridges (filled). Results: original HP inkjet cartridges ink far surpassed refills in print quality and reliability of printing.

• iPhone 6s is stuck after iOS update to 9.2.1.

  My 6 s iPhone is stuck after iOS update to 9.2.1. Laminates to 9.2 & the problem still exists. If someone has had this problem before and how it was resolved. Need help!

  Hi ahamedrzk,

  Thank you for your participation in the communities of Support from Apple.

  If your iPhone 6 is stuck during startup, try the following steps from your iPhone, iPad or iPod touch does not respond or won't turn on:

  If your device turns on but hangs when starting

  You can see a blue or Red Apple logo screen for a long time during early upward. Try the following steps:

  1. Connect your device to a computer and open iTunes. If you don't have a computer, you can borrow one, or go to an Apple Store or service provider authorized Apple for help.
  2. When your device is connected, force it to restart. Press and hold buttons sleep/wake and Home at the same time. Don't release when you see the Apple logo. Keep now until you see the Recovery mode screen.

     

  3. When you have the ability to restore or update, choose update. iTunes will try to reinstall iOS without erasing your data.

     

  iTunes will download the software for your device. If it takes more than 15 minutes, your device will exit Recovery mode and you need to repeat steps 2 and 3.

  All the best.

• "Setup is preparing your computer for first use" loop problem

  Hello, I was hoping you guys could help out me with a big problem, I ran across when trying to install Windows 7 on a desktop computer new, custom - build. I managed to successfully install my Windows 7 64-bit, it appeared, but when I try to run it, that I will meet a black screen that says "Setup is preparing your computer for first use" and it will stay there forever, I would say. I let it run all night and didn't go anywhere.

  I tried to start in safe mode, and Windows was loading files sys32, he got to "Classpnp.sys" and it froze. After a few minutes, the screen is blacked out, and I got fired the familiar screen "Setup is preparing your computer for first use.

  I bought the copy of Windows 7 nine FRY, there will be no problem with that. My HD is a (new) 240 GB PNY Optima SSD, my mobo is a (new) Z97X-SLI Gigabyte, and I have 16 GB of RAM. All these things have been recognized by my BIOS, it seems that everything is properly connected.

  I tried to install Windows 7 on a second time and exactly the same thing happened. I also tried to repair the installation to start upward, but he finds no problems. Also a check of the memory and the disk has verified without any problem. The only things I plugged are my monitor, keyboard, and mouse.

  Does anyone know of a workaround for this screen loop "first use"? Any help would be greatly appreciated.

  Set of utilities to test for computer HARDWARE manufacturers:

  Note: If you are Overclocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.

  Disconnect any other (additional) internal hard drives and external USB devices.

  Look for any loose hard drive power or cables SATA, graphics card or other power cables.

  First run Memtest86 +:

  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory

  sticks are bad or the values of the SPD in the BIOS are correct.

  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no errors at that time then your ram is OK.

  http://www.memtest.org/

  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)

  http://www.overclockers.com/forums/showthread.php?t=409152

  Test your hard drive

  Intel® drive SSD Toolbox

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455

  Corsair SSD Toolbox:

  http://www.Corsair.com/en-us/blog/2013/may/the-Corsair-SSD-Toolbox

  Toolbox of Kingston:

  http://www.Kingston.com/us/support/technical/sandforce_ssd_toolbox.aspx

  OCZ Toolbox: http://ocz.com/consumer/download/firmware

  Support PNY: http://www.PNY.com/support/contact-us

  Samsung: http://www.samsung.com/global/business/semiconductor/minisite/SSD/global/html/about/whitepaper07.html

  Samsung Magican review:

  http://www.TweakTown.com/articles/5638/Samsung-magician-4-2-first-look-new-SSD-Toolkit-adds-rapid-mode/index.html

  SanDisk SSD Toolkit: http://kb.sandisk.com/app/answers/detail/a_id/9328/

  Seagate: http://www.seagate.com/support/internal-hard-drives/laptop-hard-drives/laptop-600-ssd/

  Life of the SSD: http://ssd-life.com/

  = Is installed after Windows =.

  Device drivers: have you installed latest drivers from device of the manufacture of the motherboard?

  Check their support site for the latest drivers as the CD that came with the computer

  or motherboard may be older and less stable drivers.

  Visit the download of the manufacture of the graphics card:

  Download and install the most recent Windows 7 or 8 drivers for your card.

  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx

  NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-us

  See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos

  or equivalent ATI.

  Prime 95:

  http://www.Mersenne.org/freesoft/

  It's a stand alone .exe file contained in an archive .zip.

  Simply choose to run the 'stress test' option for 8 hours or more.

  If your PC can pass this test, your memory and CPU

  are very good (close the housing cover in order to maintain adequate ventilation)

  Core Temp:

  The temperature of each core of the processor.

  Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect

  a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.

  http://www.alcpu.com/CoreTemp/

  CPU ID (CPUZ): http://www.cpuid.com/cpuz.php

  Watch the clock speed of the CPU under various conditions of loading

  (when using speed step technology Intel EIST).

  #1 Note:

  CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory

  and the "SPD" tab shows the nominal speeds for each memory location that is filled.

  #2 Note:

  Compare the two values, the actual speed of the memory must not exceed the rated speed of your memory.

  CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.

  voltages, temperatures, fans speed.

  http://www.CPUID.com/HWMonitor.php

  Speccy:

  Advanced for your PC system information tool.

  Need to know what's inside your computer?

  No problem! Speccy will give you all the information you need.

  Note: May or may not show the motherboard manufacturing.

  Overview: https://www.piriform.com/speccy

  Free version: https://www.piriform.com/speccy/download

  Test of Stress of FurMark GPU (graphics card):

  http://www.oZone3D.NET/benchmarks/fur/

  Pass marks burn in test: http://www.passmark.com/

  Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

  HD Tune:

  Provides information of the car and has an option (tab scan error) to test your drive.

  http://www.hdtune.com/

  CrystalDiskInfo:

  http://CrystalMark.info/software/index-e.html

  User Manual: http://crystalmark.info/software/CrystalDiskInfo/manual-en/

  Monitors the State of health and the temperature. Solid State Drives brackets (value of the software).

  SpeedFan:

  Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.

  It displays your drives model number and compares your drive with other discs of the same brand and model.

  Note: Unfortunately now includes a lot of bloatware, be very careful when installing remove bloatware.

  http://www.almico.com/SpeedFan.php

  GPU - Z:

  A utility light, designed for you give information about your video card and GPU.

  http://www.techpowerup.com/GPUZ/

  PC WIZARD:

  A powerful utility designed especially for detection of hardware, also analyses more.

  He is able to identify a large scale of system components and supports the latest technologies

  and standards.

  http://www.CPUID.com/pcwizard.php

  J W Stuart: http://www.pagestart.com

• Computer starts with "Setup is preparing your computer for first use" every time.

  I've run msoobe.exe and Setup.exe in C:/Windows/System32/oobe, in Windows 7 Ultimate and now whenever the computer starts up and displays the logo of Windows 7, I get "Setup prepares your computer for first use.  After that get the Windows Welcome screen, it works very well.

  Hello

  Let us try both methods and check if it helps to resolve the issue.

  Method 1.
  Perform a startup repair, check to see if it helps.
  Follow the articles for h ELP on startuo repair.
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Method 2.
  You will need to perform a clean boot to find the service which is the cause and then disable or remove.
  Here are the steps to do:
   
  Clean clean boot:
  1. click on start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load starting points.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved to check what is the cause of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135
   
  8. in addition, you will need to uninstall and reinstall the software problem on your computer.

  Once you've found the conflicting service, stop it. Start the computer and stop it.
   
  Stop this service now.
  a. open the control panel in the Start Menu.
  b. Select administrative tools in the control panel.
  c. open the Services in the Administrative Tools window.
  d. Select the service and then click on stop in the left column of the main window of the Services window.

  Reset the computer to start as usual

  9. When you have finished troubleshooting, follow these steps to reset the computer to start as usual:
  Click Start, type msconfig.exe in the start search box and press ENTER.
  10. If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  11. When you are prompted to restart the computer, click on restart.

  It will be useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• New installation of Windows 7 Ultimate, computer loops and again: "the installation program prepares your computer for first use.

  I'm running Windows 7 Ultimate on my Toshiba Tecra A4-S211 and provided that the installation went, it seemed that took place without incident; except that when I try to start windows I see: "Starting windows" followed by "Setup prepares your computer for first use" that is displayed for about 3-5 seconds and then it restarts and displays abruptly: "cannot start Windows. A recent hardware or software change might be the cause. "I tried the safe mode, but also"last known good configuration"and I get the same results. Finally, I tried the repair function on the installation disc and says am Startup Repair is unable to repair the computer automatically, where then I click to send information to Microsoft to be told that if I had all the devices attached like a camera or portable music player to remove them and restart. I have nothing set, no flash player or anything.
  I tried to do all the steps above a dozen times each, and the results are consistent, except that the start of repair is sometimes said that there is nothing wrong with windows. Here also to point out that I had XP running on it before without problem and I tested the DVD on another computer and it worked.

  Hi Austin,.

  You can try some of them in Mode safe - tap F8 repeatedly that you start.

  If you do not have a Windows 7 disc, you can borrow a friends because they are not a copy
  protected. The manufacturer of your system will also sell the physical DVD cheap since you already
  Clean Windows. You can also do an ERD on another computer.

  Try the Startup Repair - (if at anytime, benefit you from some, but not full access coming to Windows
  return and then try to startup repair.)

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Try the disk Options recovery or Windows 7 startup repair.

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  Also from the command PROMPT on the Console (if possible) recovery or a Windows 7 disc

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  Retry After Chkdsk startup repair.

  If after those you can try the system restore to fashion without failure or the valuation or Windows 7
  disc.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  --------------------------------------------------------------------

  If you need to repair disks - these help repair Windows not re-install.

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ======================================

  If necessary:

  What to do if Windows does not start correctly
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  Follow the steps in this link as well.

  http://support.Microsoft.com/kb/2674065#Method2

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/Windows-failed-to-Starta-recent-hardware-or/8dad59b9-A08D-4cb8-8ddf-1c164b7caf65

• After Effects using 5 GB of ram for the preview of a video 12 MB in size without any effect.

  I after effects CC 2015 to date.

  My terms of reference are:

  CPU: i5 6500 3.2 Ghz

  8 GB of RAM: DDR4-2133 MHz RAM

  Storage:256 GB SSD (on which After Effects is installed)

  1 TB HARD DRIVE

  Graphics card: GeForce GTX M 970, 6 GB

  All the drivers are up to date.

  The problem is: I create a new project and import a video in. The video has a full HD resolution and is 12.5 MB in size. First of all, it takes a minute to play the video of RAM so that it begins to play in real time. Then, the video is 30 frames per second, but reading the preview, he plays at 60 frames per second (frame rate is defined as 30 fps in composition settings). I saw the RAM usage in the Task Manager and After Effects using 5 GB of RAM. Then I applied an effect and the CPU usage rose to 100% and it took about 5 minutes to get the applied effect, and after that, After Effects crashed.

  I'm quite new to After Effects, but I'm also a tech geek. I tried to play in the settings but it didn't help. I also searched on google and forums, but to no avail. This problem is essentially what makes the software unusable for me. Please HELP!

  You do not want to edit long movies in AE. After effects is NOT video editing software.  A non-linear editing (NLE) like Premiere Pro is for editing photos to tell a story. AE is for compositing, Visual effects and graphic cartoons. It is for the creation of clichés that you then use in an NLE.

  I suggest to get at least 16 GB of RAM to work with AE, but your system should work as it is. You will need to learn to manage your memory well and to get a glimpse at lower resolutions where possible.

  Now, as to your original question. AE is not simply to play a video stream, as does a NLE. After effects (such as other software based compositing on pixels) with completely decompressed frames. When you put a video compressed in a composition, the size of the original video file has no effect on the size of the images that works with After Effects. After effects unpacks this video and works internally with a full, uncompressed resolution, frames. AE calculates the values of each pixel in each image, comes with a new pixel and then reads these pixels. Who is?

  In fact, since you have so little RAM and the processor is not either, it may be a good idea to convert your video files highly compressed in a good intermediate codec for the shots, that you intend to use in AE. QuickTime with the PNG codec would be a decent choice. This way AE doesn't have to do a ton of work to decompress images behind the scenes until you can even work with him.

• Hi all, after happily using CC for almost a year he no longer works: the creative cloud icon continue on spinning and when I try to open ANY CC applications a warning saying "Adobe Application Manager is needed to solve this problem. However, he

  Hi all, after happily using CC for almost a year he no longer works: the creative cloud icon continue on spinning and when I try to open ANY CC applications a warning saying "Adobe Application Manager is needed to solve this problem. However, it is missing or damaged. Please download and install a new copy ecc ecc. Tried all that but I'm stuck. any help, please? Thank you.

  Hello

  Please try following steps depending on your operating system

  (Windows)

  (1) close adobe all processes in the Task Manager (Core sync services for the desktop application adobe, adobe office, broker CIB Adobe updater AAM service)

  2) navigate to the following locations and assign all permissions to the adobe folders to the current user.  (Right click on adobe folder select properties then click on the Security tab, click on edit and select current user, that you are connected to, select full control, click on apply and then ok)

  C: / / program data (to view hidden files to see this folder)

  C: / / program files 86 x files / common

  C: / / program files x 86.

  C: / / program files common files

  C: //program files.

  Go to c:/programdata/Adobe and oobe and rename it oobe.old

  Go to c: / / programfiles86x/common files/adobe/and rename the oobe oobe.old and aamupdator to ammupdator.old and delete the folder Adobe application manager

  Go to c: / / Users/username/appdata/local/adobe/rename in oobe to oobe.old and aamupdator.old aamupdator

  Go to Control Panel/Add or remove programs and uninstall cloud creative app

  Install app creative cloud from link according to https://creative.adobe.com/products/creative-cloud

  Run it and it should work.

  (MAC)

  (1) close adobe all processes in the activity monitor (cloud Creative), synchronization of the base, CC, ccx, services for the desktop application adobe, adobe office, CIB Adobe updater AAM Broker service

  2) navigate to the following locations and assign all permissions to the adobe folders to the current user. To navigate, click on go in the bar on then click goto... type/library/application support of / and then click OK.

  (3) to assign the authorization right click on adobe folder and click on Get info... A window will open. Then click on the lock symbol to allow editing. Then click on sign + to add your user name. Then change read only to read and write. Then click gear icon on the bottom and click on apply to the elements included and click ok... Go to the next step then.

  3) navigate to the location following support/adobe application and rename in oobe to oobe.old and aamupdator.old aamupdator.

  (4) place you ~/Library/application support/adobe/oobe and rename in oobe to oobe.old and aamupdator.old aamupdator.

  Cloud creative library and remove 5 open application).

  (6) open utility library of the application itself and delete Adobe application manager and creative cloud

  (7) install creative cloud from link according to https://creative.adobe.com/products/creative-cloud

  (8) launch cc app and it should work properly

• I just installed Lightroom CC 2015 and when it opens after 5 or 10 seconds video flashes up "" look at an overview of Lightroom and its features". It is not possible to cancel or return to Lightroom. I can just click on the play button and after that, Lig

  I just installed Lightroom CC 2015 and when it opens after 5 or 10 seconds video flashes up "" look at an overview of Lightroom and its features". It is not possible to cancel or return to Lightroom. I can just click on the play button and after that, Lightroom crashes.

  I uninstalled Lightroom, re-installed, but everything remains the same. After clicking on the play button, the video window is black. I can only kill Lightroom in the Task Manager.

  I use Windows 7.

  Thank you for helping me.

  OK guys, I have a solution. Press escape [ESC] to close the video window. Yes I know... It took less than hour of my time to understand this. If Adobe please, no matter how lucky you could focus on the provision of a useful product, not to invent unnecessary mess that have zero impact on your username? And Holy shit, employ a specialist UX, this is catastrophic!

• Apex 4.2 requires modification of the password on first use

  Hi, I use apex 4.2 linux oc4j 11 GR 2

  I have a 4.2 workspace in which I created several apex end user and I have set them up with temporary password. And require the change of password on first use is selected to YES.

  Shared component logo setting / configuration of thecompan identification process.

  declare

  Boolean val ;

  Start

  if  APEX_UTIL. CURRENT_USER_IN_GROUP() p_group_name = > 'HILL') then

  : CMP_IMG:= ' HILL. PNG';

  : COMPANYID := 2;

  : NAVIGATION_PAGE := 11;

  ELSIF APEX_UTIL. CURRENT_USER_IN_GROUP() p_group_name = > 'UCI'() then

  : CMP_IMG:= "UCI.png";

  : COMPANYID:= 1;

  : NAVIGATION_PAGE := 11;

  ELSIF APEX_UTIL. CURRENT_USER_IN_GROUP() p_group_name = > "PAUL") then

  : CMP_IMG:='PF. png';

  : COMPANYID := 4;

  : NAVIGATION_PAGE := 11;

  ELSIF APEX_UTIL. CURRENT_USER_IN_GROUP() p_group_name = > ' 'HERE') then '.

  : CMP_IMG:=' HERE. PNG';

  : COMPANYID := 3;

  : NAVIGATION_PAGE := 11;

  ELSIF APEX_UTIL. CURRENT_USER_IN_GROUP() p_group_name = > 'TODS') then

  : CMP_IMG:='. tods png';

  : COMPANYID := 5;

  : NAVIGATION_PAGE := 11;

  else : CMP_IMG:=' MCO. png' ; : NAVIGATION_PAGE := 14;

  end if;

  end;

  
  

  
  

  Login page

  
  

  wwv_flow_custom_auth_std. logon

  (P_UNAME = > :P101_USERNAME,)

  P_PASSWORD = > :P101_PASSWORD,.

  P_SESSION_ID = > v() "APP_SESSION").

  P_FLOW_PAGE = > :APP_ID |': ' | : NAVIGATION_PAGE);

  
  

  
  

  Problem 1. After my initial connection it never pop-up/navigation to the password reset page.

  Problem 2 I gave instruction to the end-user with screenshots to tell them to go to /f? p = 4550:7 where they enter an email address and user name to reset the password.

  Previously, he worked smoothly...  Lately email stuck in the queue. And should be sent with the force.

  Error ORA-27492: cannot run the "APEX_040200.ORACLE_APEX_MAIL_QUEUE" work: not available Scheduler

  It is a problem of 4.2 or I'm missing some parameters.

  Thanks for your time in advance.

  For problem 2 Alter system set job_queue_processes = 1000; It works fine now.

• What to do after the use of reflow

  Hello

  I started using reflow to achieve a responsive design. Although I'm not sure what comes after the use of reflow. Can I get html and css and I should edit them in Adobe Code and will be my Web site?

  Or will I get CSS Media Queries? Or do only CSS? Where can I get just CSS that is messy and that I need to change? How the reflow fits in my Photshop to Adobe Code workflow?

  I hope you guys understand my question, if not, please tell me and ill explain more clearly.

  Thank you

  Mark

  Hi Mark,

  I totally understand what you are looking for.  As of today, I have a couple of these questions that can help.

  First, the initial goal is to help designers to create sensitive compositions that can help receipts communicate their vision of design and behavior tailored to developers and stakeholders.  You might think that this as offering one more web friendly PSD.  We offer CSS extraction in reflow means you can incorporate, during development.  You can choose to use a variety of frames that we could not antisipate in code-gen, causing the code to come into conflict.  Because of these challenges, we take our time to learn the best way to repair as much as possible workflow.

  An alternative at the beginning was recently released by Terry Ryan to allow you to consume by reflow of the files on the media.  Check out his blog here - http://blog.terrenceryan.com/reflow-cleaner/

  Solve some of the challenges Terry stresses and work better product integrations is top of mind for our teams.  If all goes well, we will have more information for you in the coming months.

  Thanks for the post!