Help, my Acer aspire a D270 is not booting

Similar Questions

• Acer Aspire One D270 does not turn on!

  Have an Acer Aspire One D270. I've had for about 4-5 months now. Today it suddenly has stopped and it won't turn on. I left for a few hours but nothing yet. I thought it was a battery problem but the charging light does not turn. I know for sure, it is not the charger. Please help me! Thanks in advance!

  [Moved from comments]

  Nevermind found the solution...                                                                                                              Follow the steps below. (Please be careful when you handle the electrical components of the computer such as batteries and power adapters)

  • Remove the battery and hold the power for a few seconds (drain any remaining power)
  • Turning on the computer without the battery with the AC adapter is plugged in.
  • Wait a few seconds and then reconnect the battery

  After a few tries the computer should start normally supported. The amber battery stops flashing and turns green when fully charged.

• Need help with Acer Aspire please usb ports not working not

  I have an Acer Aspire V5 - 573G and usb ports have suddenly stopped working

  You must open the Device Manager, expand the Serial USB Controllers > right click on everthing listed under it, and then uninstall it.

  Then, restart the computer. All the uninstalled driver would be restored automatically by windows.

• Acer Aspire One d270 ram upgrade

  I recently bought a netbook Acer Aspire One D270-1806. It comes with 1 GB of Ram.

  I'm looking for this move to 2 GB. I could not find a service manual for this netbook.

  Can someone point me in the right direction?

  I've seen some posts saying that the upgrade of ram D270 was deemed not user replaceable. Although Acer may have tried not user replaceable; It is altogether. It was so easy. I went on the standard of 1 GB of Ram for a 2 GB key in about 10 minutes.

  Here's the video I used:

  http://www.YouTube.com/watch?v=vEcIer28aNc

• Acer Aspire Wifi S3 does not

  WiFi an Acer Aspire S3 adapter does not work and he repeats to me "limited." It has always been a quick an easy solution to the day, the admin has forgotten their password and can not remember. They changed on a different computer, but the Acer could not know that because he had no wifi connectivity. No one can access the command prompt, or anything else that requires an admin password. The laptop is now useless and no one can reset or refresh it because you need the admin password to do so. There are no. ETHERNET SLOT anywhere on the computer.

  All solutions?

  In addition, Windows Update cannot update anything because there is no wireless connection. This is a serious problem...

  Help, please!

  There is only the locations of USB, HDMI and SD card on the laptop.

  Every time that you try to connect to the Admin, he says:

  "This computer is in offline mode. Connect, and then try again"or something like that.

  Hello

  Given that the admin has forgotten the old password and due to the unavailability of the network connection, the device is unable to synchronize the password. At this point of time you have get the device for a coverage area of network where you let the computer, the password synchronization or you must put in the old password to connect.

  See also, Cliff_NCliff_N responded on 7 December 2012 post

• Acer Aspire 5610Z Windows does not load... No recovery cd

  I have an Acer Aspire 5610Z Windows does not load, when I use the F10 it comes up says:

  Modify the Windows boot option for: Microsoft Windows Vista

  Path: \windows\system32\winload.exe

  Score: 1

  Drive hard b44bb44b

  [/ noexecute = optin]

  That do I don't know...

  Thank you

  "When I start the laptop, 1 screen 2 times, beebs gives me the whats available in the computer, Press (F1) to resume, or (F2) of the installation.

  I wish that you mentioned the "beeps" in your original question.

  When you start a computer, you will receive a 'beep', which indicates that the motherboard has spent his own self (POST tests. Power on self test))

  'beeps' (plural) normally indicate a hardware problem.

  Read the Information on the links about different codes "beep":

  http://www.computerhope.com/beep.htm

  http://www.pchell.com/hardware/beepcodes.shtml

  Contact the Acer Support if under warranty.

  http://support.Acer.com/us/en/default.aspx

  If it is not under warranty, contact a repair shop, local.

  See you soon.

• When I try to start my laptop, it goes to the Acer logo screen and will not boot Windows 8.

  Acer E5-471

  When I try to start my laptop, it goes to the Acer logo screen and will not boot Windows 8. Only a black screen and mouse pointer appear. How can I solve this problem?

  Hello

  1 power off the device
  2. power on and immediately keep taping Alt + F10, unit will start to recovery, choose Exit & continue to windows. Post back if I helped

• Acer Aspire VN7 - 591G trackpad not recognized

  Hello

  I am the owner of a laptop Acer Aspire VN7 - 591G Black Edition.  Today, at the start, my trackpad is more responded to my touch or clicks.  First of all, I pressed Fn + F7 to see if I had just accidentally turned off, but it wasn't the case.  I plugged an external mouse on the USB port to my laptop to navigate and once in the Device Manager, found that my trackpad is not listed under mice and other pointing devices.

  

  In addition, under mouse properties, my trackpad does not appear.  Mouse compatible HID is the external mouse I currently use.

  

  I'm not sure how to solve this problem.  If anyone has any ideas that could help, it would be greatly appreciated

  In addition, I guess I should mention that I'm running Windows 10 months and not had any problems until today.

• Acer aspire keyboard R11 does not

  I have an acer aspire R11. It's the only 4months old and rarely used. He lights the other day and suddenly the keyboard and mouse work not at all. the mouse pad is and I tried to update and restart, and then the mouse pad does not work either. Could, I accidentally locked or did something in the setting? HELP Please!

  Have you tried this:

  1. turn off your laptop

  2 disconnect the power adapter

  3. wait a few minutes

  4. follow the procedure

  The battery reset pinhole is located on the bottom of the laptop and wearing this symbol .

• Acer Aspire S7 392 does not start after the new Antivirus installation

  Hello

  I bought the Acer Aspire S7 392 in October this year of digitec.ch AG here in Switzerland. Everything worked well until December 19 when my Antivirus McAfee has expired and I decided to change my Comodo Internet Security antivirus. A month back, I had installed Windows 8.1 as well and things were smooth until last night. Last night, when I installed Comodo Internet Security, the computer requires a restart, I did, and then my computer erased. I could not even reached the Acer logo at startup.

  As I tried to check the observation of details of covers them this white screen problem, Irealized that many people suffer from a similar problem. It seems that Windows 8.1 and an installation of a new antivirus may have led to this white screen problem. In addition, it seems to be a bios problem that the computer would not start and I hope that someone could help me with this problem.

  Thank you very much Acer-Tommy. I had to take it to the Acer Support in Switzerland. He partially solved the problem. My S7-392 has a built-in battery that I had to reset which allowed the laptop to reboot normally. As in, I was able to boot up to Windows 8.1. However, as soon as I logged into Windows, it hooked up soon. Do the restart 3 times triggered the automatic repair/update option. That I took and returned to Windows 8. I had a Bios 2.05 2.03 intead and I had to install 2.05 before making updates. I recommend you seriously all the people who use the S7-392 to strictly follow the installation procedure for Windows 8.1 mentioned on the Acer site.

  Please update your Bios to 2.05 before installing something new, especially a new anti-virus.

• Acer Aspire laptop bluescreened, will not start even in safe mode, running vista

  My roommates son asked me to help him to be on the internet, which I did, ran unusually slow in doing so, I noticed it when I checked, I found that the notebook had three solutions of different software protection, antivirus, Norton, McAffrey and AVG 2011 version for free. Also I noticed he had some solutions that provided a diagnosis, list of problems found and wanted to pay for the product before they would allow acccess to the fix. I uninstalled Norton and the McAffrey and improved the AVG free version of 2012. I also uninstalled the pesky diagnosis/buy me for the correction and the ask.com toolbar software. I installed ccleaner from piriform as well. The laptop seems to run a little faster, but the next morning he projected blue and when I tried to start it in safe mode it not loaded so far and then frozen, always in the same spot something AVGi and then it crashes, it will not load the rest of the necessary drivers. I tried to boot to the last known good as well. I even tried to downgrade to Windows xp home edition sp3 and when I do it it says there is no hard drive detected, and do I have to make sure that it works correctly.  I am at a loss, my sons friends bought the laptop (Acer Aspire 5315) for $50.00 and did not get a recovery disk so that the option does not exist or the other. What can I do to solve this problem. I'm sure that for some reason, it has to do with the BIOS and I went to the Acer site (from my laptop) and downloaded something to repair the bios on a flash drive, but me is not good because I can not start on either flash player. I am at a loss here and have no idea how to solve this problem. I am practically self-taught and I am a beginner when it comes to repairing the problems. This one is right behind me, someone has an idea what is my problem?

  I even tried to downgrade to Windows xp home edition sp3 and when I do it it says there is no hard drive detected, and do I have to make sure that it works correctly.

  If you tried to install Windows XP, and it says that? Do you have any installation CD? I don't want to say this, but maybe the hard drive went kaput. Maybe a little rare, but it can happen and so he bought the laptop for $50, which I am sure he did not a store. You hear a clicking sound from the hard drive? Have you checked for the hard drive in the BIOS?

• Acer Aspire 5536 Webcam does not work with Windows Live Messenger

  My Acer Aspire 5536 laptop with built in Crystal Eye webcam does not work on Windows Live Messenger.  Open the application of webcam Crystal Eye went very well, taking pictures is fine, until I want to use it in a conversation on Messenger.  Is there something I can do?

  A quick response would be much appreciated.

  Hi Tom Hawx,.

  (1) if it works well before?

  (2) remember to make changes?

  (3) you get an error message?

  You can follow the steps mentioned in the article below to configure settings for audio\video Messenger.

  With the help of your LifeCam with Microsoft Live Messenger

  http://support.Microsoft.com/kb/921332

  (Article applies to deliver the LifeCam, works very well for the issue)

  If the problem persists always, for more expert on this issue, help post your query on Windows Live Forum.

  Windows Live Forum - http://windowslivehelp.com/

• Help! -Acer Aspire all-in-one touch screen after upgrade Windows 8 Pro

  Hi all!

  This is a rather confusing questions and about * me off no end!  I know that some of you may have encountered this already and could have a potential solution?

  I have an Acer Aspire all-in-one, AZ5101 (Aspire Z5101), with 4 GB of RAM, etc..

  Since the Developer Preview of Windows 8 came out, I've been running Windows 8 perfectly.  I completely uninstalled (each time itself) and run the following:

  Windows 8 Developer Preview, 64-bit

  Windows 8 Preview of consumer, 64-bit

  Windows 8 Preview, 64-bit version

  In any case, on this PC worked perfectly - y INCLUSIVE of the TOUCH SCREEN.  I never had a problem.

  So far so good.  Then, they finally released updates Windows 8 Pro official licensed by download.  I bought the upgrade and downloaded.  Just like in * ALL * other cases, upgrade, I chose "keep nothing" of the old system (I never really got all the important data on here), and do the upgrade itself.

  After the upgrade was complete, and ALL Windows 8 Pro updates have been applied by Windows update, I have a system where the screen is clear and precise, everything works, and all devices in Device Manager, show the Greens well, it works fine - NO ERRORS.  HOWEVER - NO CONTACT!  No touch no screen function at all.  The screen now has this time as a standard monitor.

  I tried the driver Idéacom - no luck.  Anyone know (please? LOL) how to get the touch screen to work again?  Thank you very much!  I really appreciate any help you can give.  Microsoft technical support had NO idea and no reply emails from Acer! Laughing out loud

  Thanks again,

  Mike

  [edited to conform to the guidelines]

  Hello Mike

  I sent the pilot. Please test and advise.

  Kind regards

  FReeZA

• Acer Aspire One will be not run Office Starter after having uninstalled windows 10

  I made a huge mistake and clicked on the link to get Windows 10.  After you have installed Windows 10, I realized that the Office Starter Edition on my Acer Aspire One is not compatible.  I started Windows 7 but now Office Starter will not work.  I try to fix but get a message that says I don't have an internet connection.  Yes!

  Hello

  I advise you to put your PC with [Alt] + [F10] and perform the updates. Using "Back to Windows 7", you lose a lot of applications and have a few problems.

• Acer Aspire 6930 no screen, not even on external monitor

  One of my clients gave me an Acer Aspire 6930. He said that he was looking at internet porn and he got a message that he had to pay $300.00 to unlock his PC and it stopped on him (see the ice virus?). When I tried to bring up the laptop I have nothing on the screen to indicate to all life. But the disks rotate. I tried to boot from a Windows XP disk and still nothing on the screen. I tried FN + F3 and FN + F5, FN + F6 to no vail. I tried video routing using a HDMI cable and by repeating steps and received a 'no signal' on the external monitor and I tried the same process using a VGA cable for the external monitor and still "no signal". I tried to Flash the bios with a modded one since I don't know how to seprate the exe of the bios with insertng hex editor the usb flash drive and pressing the FN + ESC, and then press the power button and now the keys FN + ESC 5 additional seconds. I am now completely at a loss and could use very little help.

  Thank you

  Definitely one of our best posts.

  I'm sure you already said your customer to upgrade its anti-virus software and stay out of the porn sites.