Help! My computer is blind not see my files

Similar Questions

• My new computer, Itunes can not see my Iphone

  I downloaded ITunes on my new Lenovo computer with Windows 10 and when I connect my iPhone to ITunes synchronization do not see my phone.

  Try the iOS device is not showing in iTunes for Windows.

  TT2

• Why can I not see the files I back up by using the backup and restore of Vista

  Can someone help me?  I have a Dell Inspiron 1525 and implemented backup and restore feature Vista so that every Sunday he automatically backs up my computer to my external drive.  I was on the computer when he said it starts up and that upward was completed successfully.  I assummed everything was fine until today when I show my father my drive external and noticed that none of the backup of files were there... or at least I did not see them.  The only files on the disk were the ones I put manually on here from my old computer.  I then ran a manual upward using Vista and again it says backup successfully completed.  I then watched the external hard drive and once again no new files.  The strange thing is the back up and restore program shows all the dates he has saved and also allows me to restore files from the back to the top.  To do this, I deleted a file I didn't really need out of my hard drive and then is gone to restore program and found the file and restored.  Problem is that the program does not say where he makes the file from.  What is going on?  Are backup files of certain types of hidden file I don't see unless I use the backup and restore program under vista?  I am currently running Vista Home Premium on a 32 bit system and the external hard drive I have is a Western Digital My Book Essential Edition.

  Windows backup is stored in a folder with the same name as your computer.  Open a command prompt and type echo %ComputerName% or startup, right-click on computer, properties.  You should see that % ComputerName % folder on your external drive, and in this context, a backup set. Steve Hebert - MVP Microsoft Internet Explorer

• DNG does not see the files

  Running Vista Pro, 64 bit with Adobe DNG Converter 8.3.0.141.

  OS is up to date with all updates.

  I used the converter DNG years so I am familiar with its operation.

  Now when I try to convert a folder of Nikon D610 naves, the DNG Converter does not all files in the folder.

  The files are there and are visible in Windows Explorer, Photo Mechanic, etc.

  The files have not been corrupted by other programs, and the DNG Converter can not see the original files on my SD card.

  When I drag naves of the folder on the DNG icon on my desktop, it is converted.

  Other that the usual windows updates it is not changed to my computer.

  I uninstalled and reinstalled the DNG Converter, with the same results.

  Any help would be greatly appreciated.

  Thank you.

  When the DNG Converter is opened, the selected folder cannot be opened in the DNG folder tree.

  Thank you.

• Why can I not see my file in Lightroom?

  I have a problem see a file in LR 4.2 when it is located in the folder where I want it to be.

  I created a composite tiff image of two raw files residing in two different folders.  I had exported the two LR like TIFF raw files, open the TIFF in Photoshop CS5, then grouped into a file of multilayer tiff to create a composite file 600 + MB.  This composite was recorded in Photoshop, under a new file name using the "save under".  I knew that the new composite file would not be in the LR catalog, until I imported it.   When I imported, the picture went in a new folder named date (call the folder "A").  So far, it all makes sense to me.

  From that point on things got funny.  Working in LR, I tried to move the composite single file in the folder that make up one of the files is from (let's call it 'B' folder).  The move has failed. Instead, I got an error message saying that the file already existed in 'b '.   I couldn't see the file in 'B' using lightroom, but MS Explorer revealed that the file was there.  I don't understand how he got there.

  Still trying to get my composite 'B' recognized by LR, I first deleted the composite 'B' using Explorer, then went into LR and moved the file 'A' (where recognized LR), in 'B '.   Still not good.  LR does not display the file in 'B', but it appears in the Explorer.

  I guess I could live with this composite file into its own folder, 'A', but this isn't really where I want to.  More importantly, I don't understand why I can't see in LR in the folder where I want to.

  Help is appreciated.

  My catalog file is corrupted?

  The XMP files have something to do with it?

  The size of the file (> 600 MB) a factor?

  Any suggestions?

  Win 7, LR 4.2, PS CS5.

  TIA

  Jerry

  Problem went away this morning!

  I tried this step once again (again) after my computer starts:

  Still trying to get my composite 'B' recognized by LR, I first deleted the composite 'B' using Explorer, then went into LR and moved the file 'A' (where recognized LR), in 'B '.

  This time it worked, the file moved successfully and normally appears in LR.

  Don't know if the re-booting helped, or I made a stupid mistake that healed a good night sleep to.  If later, I apologize to all those who are scratched their heads on this one.

  Thank you

  Jerry

• I can not see some files on my network drive, but can browse their

  Hello
  One of our users are their files and missing files after the letter 'F' on their network drive. I checked on the server, and the files are missing on the server. However, I can browse to and open them. When I look in the windows explorer for this user, I do not see the folders and files passed letter 'F' But if I know the name of a file or folder that is there and manually type the name in the address bar, I can browse on him. For example, there is a folder named IBM. I see not the folder in windows explore. But if I type in the address bar (\\servername\username\IBM), I can see the contents of the file. If the files are there, but we cannot see them. So far only this user is having this problem isn't a question broad system.

  I activated the hidden file parameter and it is set to show the hidden files and folders. The server is a windows 2003 SP2 Enterprise

  Thanks for your help

  In the Explorer of-> tools-> view (tab), Folder Options->

  In addition to checking "Show the hidden files and folders", try unchecking the "Hide protected operating system files" two lines down.  It will ask if you are sure you want to do this - simply replies 'yes '.

  If it turns out that the system attribute has been applied to the file, you will not be able to change it in the Properties window.  You will need to use the "Attrib" command  See the following procedure article:

  «You cannow view or change the read-only or system attributes of folders... under Windows XP...» »
     <>http://support.Microsoft.com/kb/326549 >

  HTH,
  JW

• Computer XP can't see shared files in windows7

  My original computer is a desktop like in XP. We use a wireless router for network a new laptop running windows 7. Both computers are having no problem with internet access. I'm following the instructions of network on the microsoft site to set up a home network for two computers, step by step. I've been successful that half - the portable windows7 can now see and share files, an external hard drive and a printer attached to the XP computer. But the XP computer can 'see' the portable windows7, BUT cannot access shared folders or files on the laptop. I'm sure that I shared the files correctly and/or the libraries on the laptop, but none of them appear on the netowrk places. When I look at the "whole" network and go the the correct workgroup, the laptop is here, but as soon as I try to open it I get an error message. " I'm a novice, instructions step by step for a fix would be appreciated.

  Here is the Vista Forums.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  See you soon

  Mick Murphy - Microsoft partner

• Windows 7 can not "see" the files on my external hard drive all of a sudden after I used ICACLS to give me full control.

  I used ICACLS in a command prompt high to give me all permissions for all on the external hard drive. I do not share the disk or remove permissions from any other 'user' but all of a sudden the guest not to see the files on the disc and I don't know what to do about it. But when I open a window and go outside, the files are there, I can access it, use them in all cases, I would normally.

  Anyone has an idea why an elevated command prompt would not be able to see the files that are clearly on the external hard drive? There is just something not right on command prompt, you see only not the files that are there.

  Thanks in advance

  Update: it turns out that there seems to be some kind of conflict between the UAC and the Administrators group. Don't know how I was touched, but I finally finished refusing authorization in writing system on my external hard drive. Suddenly Builtin Administrator, users of Builtin and NT Authority stood, one of them, or another group, resumed training, locked read-only access to all files, and then he took it a little further and removed my ability to write attributes or read them. I was forced to use a back up 'Admin I have on standby with a third I reapplied my main administrator permissions, but still denied access. After doing things with ICACLS, I was able to get a partial control, but I still couldn't save.

  At the end of the road, it turns out that an external hard drive formatted in NTFS is recognized by the computer as a disk fixed, as if it were part of the computer, and there it was treated as such, given my file system files by locking the.

  Even with the hidden Builtin Administrator I activated, I couldn't access the files. I finally had to move all the girls to the drive c:\ and format the external drive with exFat so that the system do not think that he was part of the computer. Unfortunately, I can never depend on having a System Image backup because exFat cannot have a writing for her.

  I have full access, as well as anyone and everyone, there is no permissions on exFat, so it's a compromise, better than the system for the control of my own computer ruined combat...

  Luke

• Aid can not see my files

  Hello

  I have questions see my files. Please see photo. I'm on 10.9.5. I rebooted a few times also and having the same problem. Whenever I double click on the hard disk, the Office is empty and then appears.

  Any help would be greatly appreciated...

  

  If you Mac running 10.9.5, it cannot be a Mac power.

• New Mac, same disk external DRIVE for the library; does not see the files

  I reconnected my iTunes library from a disk external DRIVE to my new computer, but iTunes does not recognize my files of the ALAC instead, he goes to the cloud and plays music from Apple things. How can I listen to my files? All the files are there, the library is intact; I changed the path in iTunes. Without result. He always plays with the cloud.

  You do not change the path in iTunes.  Who does as it says which is tell iTunes where media files [new] store. You change the path you launch iTunes by holding down the option/alt key, while the application starts and then choose when prompted the iTunes Library.itl file in the iTunes folder you included if all goes well on the hard disk external.  If everything you have on the outside are media files, then you better head for your old computer fast and get the rest of the library there.  It's the rest of these files in the iTunes folder that make up the other half of the 'library' iTunes needs.

• Why can I not see my files or files on my flash drive?

  I bought a 64 GB USB flash drive to make a copy of some files (mainly of the wavs and mp3s into folders and subfolders several).  I drag some of them in the flash player and wait until the bar fills and the 'task' was over.  At this point, I can see the files.  I'll work and return with files over again to copy and when I open the flash drive in the viewfinder, I see nothing.  I try to copy the previous files (because they seem to not be there) and it is said that they ARE there.  Why is this and how do I solve this problem so I can see what was copied and what does not?

  I also get these weird errors if I try out something.  It's never happened before.  I'm quite confused.

  

  

• In Outlook Express, can not see the file tab, such as page moves right

  I can't move the Outlook Express mail page to the right.  It just won't go further to the right.  I get the arrow on the right side, but he doesn't hover over.   So I don't see the file, only a part of the Mail tab tab (-Arnaud).

  It is not really clear what you mean.  You can move the entire window of OE by clicking on the title bar (blue at the top of the window) and hold the mouse and then moving the mouse.  It is also not clear what you hear on the mail tab and the file tab.  Are you sure you're saying OE and not Outlook?  You can also try view | Layout to change what is displayed.

  Steve

• Why can I not see the files in my Windows Explorer document library?

  I saved several PDF files in a folder in my library of documents, but I can't seen from Windows Explorer.  When I go to save another file, I can see the previous ones I saved from the browser to 'Rescue', but I don't see them anywhere else.  Why not?

  The padlock icon means that the files are not shared with others.  If you right click on the folder and choose "Share with" menu, you can remove the lock (but doing so allows anyone on your network to see your files).

  Regarding files jpeg appears not, have you tried pressing F5 to force the file to refresh?
  If this does not work, please respond and let me know.  It could be that the files are not saved to your documents, but in fact a system such as "C:\Program Files\Ancentry\" folder.

• With the help of window 7 can not save the file in the flash player cannot modify a file existing in the drive of the flesh

  Using window 7

  I can not save file in the drive of the flesh

  I can't edit a file existing in the drive of the flesh

  Nothing to do with win7, assuming that your usb ports do not work.

  You should not change the files stored on a USB key, flash drive is a temporary location and must be used to move files.

  Not all flash drives are equal, some are allmost gave, perhaps your failed.

• Photomerge will not 'see' my files

  PS CS4 - I made a panorama with five 16-bit RAW files. Perfect. Since neither PS nor bridge

  can see my files. Bridge says "The PS must at least 2 selected files". I have five selected.

  When I try photomerge in PS it says "tmp00000001". Does anyone have a suggestion? I already have

  trashed preferences and restarted my Mac OS 10.6. Thank you!

  Are Photoshop and OS fully updated?

  Could you please post a screenshot with the relevant panels visible?

  What format are the selected iamges?