Help! Mysterious exception during load tests (call on a cache item)

Similar Questions

• With the help of functional test for load testing scripts

  Hey,.
  I'm new to this tool. Right now, I use a version 9.2 of OATS. I created a few functional scripts for Oracle E - business applications using openscript. Can I use the same scripts for my load tests. If so, how would I be able to do? When I created a load of scripts using openscript, they appear in BTA. But my functonal scripts do not appear under 'select scripts' upward section OLT.

  You will need create scripts for load tests. Functional scripts cannot be used BTA. The exceptions to this rule would be the "General" components (Code of Java Script & Web Services), which can also be used in BTA.

  for example, instead of "Testing - Oracle EBS/functional forms.
  Select "Load Testing (Protocol Automation) - Oracle EBS/forms.

  Once you get in tests that you will realize that you want to create very specific scripts and do not want to try to re-use of functional scripts to load. I know that many of these tools are "sold" to the fact that functional scripts can be reused for the load, but when it comes down to it, you'll want to design your scripts load separately anyway!

• Why the total time required for the test sequence is different during the test runs

  Hello

  -J' have different test resources to test our product which includes engines and the NOR-Box (6351).

  -Number of test files in sequence that are called during the test (ca. 20)

  -The problem is that when I run these test sequence files separate (say only 3 out of 20), total time by these tests are t1, t2 and t3, but when - I left all 20 tests to run without jumping all the time needed by the 3 tests above is t1 + 60 s, t2 + 80 s and t3 + 50sec. Why it is so and how can I avoid this problem.

  -The tests are motors to move, take samples or box then save them on my computer after testing the limits. Since they are time critical, when I do all the running tests in a test go a lot do not PASS. I can't run them separately because it takes more time, more interference by user and also more than one report that is not desired.

  -J' tried unloading after execution steps, but it did not help.

  Kind regards

  RB

  This probably depends on that made your sequence. Have you tried shrink where extra time is being spent? You can time how long different parts of your sequence are following the steps of the expression as follows:

  Locals.StartTime = Seconds()

  Locals.ElapsedTime = Seconds() - Locals.starttime

  You can also watch time module in your reports. There is nothing specific on TestStand that should cause some sort of slow down like this. I recommend trying to figure out where the extra time is being spent. I suspect once you do, the cause will become obvious.

  -Doug

• Phone dials a number at random during an ongoing call

  My phone and my wife's phone has been randomly component another number during an active call. This causes the current call to give up without warning.

  I thought it was my accidental mistake until it happened to him, then it is true again and again on my phone.

  You should try an app like Tools of Droid of Tedd. It locks the screen while you are on a call, which will prevent the face dials. It locks the screen and prevents any entry through the screen while you are on a call. I'm not saying it's happening for sure, but it could be. This could be a good test for it. If the problem goes away when you use tools of Tedd Droid that I would say that what's happening is you're face composition.

  There's another app on the market that will do the same thing, but I don't remember the name of any other. I hope this helps.

• See load test: ways to script for applications commands?

  Hello

  I'm designing a simple tool for an environment of view and so far its goes pretty well load test.  With the help of command line arguments and some Powershell, I am capable of recursion through a list of users and connect multiple sessions on a display server and open office and a few RDS App sessions.  My question is: is there a built-in way to pass a script in the command line arguments run certain commands on this computer to office or RDS App session?  Nothing crazy, just type in Notepad, open a few programs, save a doc or two--the usual stuff to generate regular workloads.

  I know that VMware and third party companies have tools for this, but they don't specifically meet my needs without extensive configuration and a lot of hooks in our systems.  I'm trying to keep the footprint of this test as small as possible, so a simple Powershell script is how I want to move forward.  I guess that Powershell has a method to do this, but I'm not guru script nor it is a PS forum, so I was hoping there was something that already exists when I call the view connection that I could use.

  Any help is appreciated, thanks in advance!

  I can not completely solve your problem, but it can be a little simpler.

  Q. for the "is there a built-in way to pass a script in the command line arguments run certain commands on this computer to office or RDS App session?

  A. No, but you can use strategies Group (GPO) that can be activated when his connection to run a script.

  BTW, for others who read this blog, "VMware View Planner" is the internal tool that can be used by customers too much for some areas of load test: VMware View Planner | United States

• Question encountered in Oracle load testing

  Hello
  
  We created a sample script using Oracle Script and trying to read for multi users with Oracle load test open. to simulate the real effects of the users, we had used the database for this scenario. All scripts and csv file is placed in the storage folder.
  During configuration of database construction scenari otab, we face as a result of warning message "cannot find the database file (rest = new repository;. file = Bank of data/null)
  
  Please help how to solve this error.
  
  Kind regards
  Mahesh

  Hello

  This means that OLT cannot locate the data bank when you try to read the script. When you have added the database for the script or the script you were asked if you want to refer to the data from the repository Bank. My guess is that you probably chose repository, so try to choose the script instead.

  Kind regards
  Jamie

• Volume Control Center does not work during a Skype call

  Volume Control Center does not work during a Skype call.

  That's exactly what I got after upgrade to 9.0.2 and 6.3 of Skype iOS

  I use Control Center to adjust the volume in applications. I can't use the volume button of material - it's broken.

  I thought that I could go back to the previous version of Skype (because I remember the working software volume slider), but the AppStore suggests none of the previous versions. I can't find another Skype.ipa than 6.3 anywhere. I tried to restore my ipad support Skype, but the program hangs for hours saying "Installation."

  Any help, please?

  Well, found a solution for the broken button by activating AssistiveTouch under settings > general > accessibility > AssistiveTouch.

• OpenScript record functional tests, but no load test on firefox

  Hello world
  
  I record some tests with OpenScript 9.3.1.0, I have no problem recording of functional tests with IE or FF, but when I try to save a load just test IE works, firefox opens the window and I would like to do everything normal, but it records nothing; I would try with FF 3.6 and 3.5, I would launch the diagnostig tool but it does not show me something wrong. I hope someone can help me.
  
  Thank you
  
  Published by: user8874599 on June 8, 2012 13:45

  Hello

  When you load test OpenScript will change your browsers proxy to point to localhost 7777 as is the port that openscript internal proxy uses to save the navigations, can you check if when the parameters of proxy registration with FF is FF changed?

  If this isn't the case, you can try to manually change them to point to localhost 7777 you will find the settings in the Options -> Advanced -> network -> settings.

  If the proxy is already set, please check that there is nothing on the no proxy for: box

  Hope this helps

  Alex

• Basic authentication for the WSDL Web Service for load test

  I am trying to load test a web service; the URL of the WSDL is behind a user name and password using http basic authentication. I can add the URL of the WSDL without problem with the user name and password, but when I read the script, I receive a "401 Unauthorized" errors
  
  I looked at the preferences > recording > Web Services > the Proxy Configuration, and then refer you to the preferences > recording > HTTP > the Proxy settings. I also looked at similar settings under Preferences > reading.
  
  I'm running OpenScript (9.1), how to configure it...?
  
  Thank you very much!
  
  KM
  
  Published by: KM 14 Sep, 2011 12:12

  Hello

  You can right click on the section to initialize your script and then:

  Add-> other-> HTTP-> authentication.

  You need 3 parameters:

  A - http://someurl - url that will authenticate any url that contains the http://someurl string for example http://someurl.com/index.html
  A password
  A user

  The following code should be added in your script:

  http.addAuthentication("http://someurl", "username",
                      deobfuscate("5blNah5kX/XuZnepYwInFw=="));
  

  Hope this helps

  Alex

• Protocols supported in OAT 9.2 for load tests

  Hello
  
  Can someone help us to provide a list of protocols supported by OATMEAL 9.2 for load test applications.
  
  Thanks in advance.
  
  Kind regards
  Mahesh

  Hi Manu

  OATS 9.20 has the following modules for load tests:

  HTTP/S
  -Siebel
  EBS/forms
  -ADF
  -Flex
  -Oracle database

  Concerning

  Alex

• Load Testing - how ' end now?

  Hello Adobe,

  I see where all queries about the FMS/FMIS server load test are given in the link:

  http://www.richinternet.de/blog/index.cfm?entry=6EA082F4-A85E-FD95-A8AB8C7A1770D09A

  I found that on my own.

  fmscheck commands are executed OK on Windows XP in the command window, BUT I get error argument inavlid to the same code, when placed in a batch file to invoke a closure of the code.

  Count that now everyone has found a way to whisk the fmscheck.exe in a way that is used to load test a box?

  For VOD and live?

  Hello

  The logic seems to be OK, but I guess the issue you are facing is with some areas badly or somewhere.

  Try to copy this script, this can work well for you-

  Set /A counter = 0
  : Start
  Start/b fmscheck.exe - host localhost - app vod - sample 10 piece 0 - logfile output.txt
  Set /A counter = counter % + 1
  IF % against LEQ %100 goto: start

  VOD corresponding to my request, my test flv file and 0 are 10 start and duration of the sample settings.

  If you need assistance with the accuracy of the tool, you can check this - http://help.adobe.com/en_US/FlashMediaServer/3.5_AdminGuide/WS5b3ccc516d4fbf351e63e3d119f2 9261b 7 - 7fe8.html

  I hope this works.

• Oracle load testing for Web Applications - connection problem

  Hello
  
  I am currently trying to learn that load tests of Oracle for Applications Web tool Version: 8.50.0299 and he asks me a user name and password to connect...
  
  and I only set a master password during installation
  try recording with user name: System, sys
  password: master password
  
  It did not work :(
  
  
  any ideas?

  You want the user 'administrator' (with the password you set during installation).

• How to load test on Discoverer 10 g

  Hi guys,.
  We are trying to do some performance tests on the discoverer, I was wondering if you have never done this before.
  Could you please share some comments and experience with me, please?
  I tried to do it according to the thread:
  Discoverer 10g load test
  
  But apparently both insured in the nets above don't help me through the trials.
  I use LoadRunner 8.1 to the performance test and tried to use the RMI protocol to record the scripts.
  
  I was wondering if Oracle provided such document to help performance testing discoverer, thank you.
  
  
  -Ding Wei

  Wei,

  Discover this MetaLink document
  415506.1 how to use Discoverer Plus 10 g (10.1.2) with Mercury LoadRunner

  There is creation and it is not officially supported, but it should give you the information you need source.jar, the default folders, the sample scripts.

  Kind regards

  Steve.

• Unknown exception during analysis of NsSAX2Reader

  Hello!
  
  I use the java API for Berkeley DB XML 2.4.13 under Windows XP SP2.
  I have the following peace of code:
  
  documentConfig = new XmlDocumentConfig();
  Results = xmlContainer.getAllDocuments (documentConfig) XmlResults;
  
  {while (Results.hasNext ())}
  XmlDocument doc = results.next () .asDocument ();
  ...
  }
  
  After the line "XmlDocument doc = results.next () .asDocument ()" I get an exception:
  
  com.sleepycat.dbxml.XmlException: error: unknown exception during NsSAX2Reader parse the file: \dbxml-2.4.13\dbxml\src\dbxml\nodeStore\NsSAX2Reader.cpp line: 366, errcode = INTERNAL_ERROR
  at com.sleepycat.dbxml.dbxml_javaJNI.XmlResults_nextInternal (Native Method)
  at com.sleepycat.dbxml.XmlResults.nextInternal(XmlResults.java:162)
  at com.sleepycat.dbxml.XmlResults.next(XmlResults.java:47)
  .... (with exceptions in my code)
  
  Does anyone know how to determine what is the reason for this error?
  
  Additional information:
  I added material to the container via the C++ API
  The container has WholeDoc type
  
  Thanks in advance
  
  Vyacheslav

  Well I can't yet reproduce your error, even with the resolver that you gave. Nothing in your resolver is clearly wrong, although it seems strange that you use tntManager to create the stream buffer instead of the XmlManager spent by the funtion. Try calling

  return xmlManager.createMemBufInputStream(null, 0, false);
  

  Instead of

  return tntManager.createMemBufInputStream(null, 0, false);
  

  Lauren Foutz

• It is possible to switch between mode 'file separate globals' to 'share the same globals file mode' during the test run.

  Hi all

  It is possible to switch between mode 'file separate globals' to 'share the same globals file mode' during the test run.

  Or there is another option to use variables separated and shared at the same time for 2 parallel Sockets (ParallelModel.seq).

  Thank you

  Thank you

  I think it's useful!