copy stimulus profiles

Similar Questions

• Can I copy my profile of one copy of Firefox to another?

  I have Firefox 42 perfectly configured on a computer Windows 10. Installation of others is a mess. It's on another computer Windows 10. My user name and directories are identical on each. I don't want to debug ALL the symptoms I have now. It would be wonderful if I could completely uninstall the wrong installation and reinstall Firefox 42 fresh. So until I run it, copy my profile from the good computer on the profile on the newly installed version.

  Will this work? Is that all I need to know to achieve this?

  (I know that you think that this guy has just need a bit of hand-holding to clear up its problems normally. Believe me, I uninstalled and reinstalled Firefox four times in the last five days. Right now my address bar does not appear, my bookmarks bar is empty, my buttons previous and next are grey and don't function and if I ever fix that I will then find all the problems I've lived with since upgrading to 42.)

  Any help will be greatly appreciated.

  Copy profile 'good' to a USB "such what."
  Then copy the thumb into the profile on the wrong folder.
  You can use the Profile Manager to access the 'good' profile.

  https://support.Mozilla.org/en-us/KB/Profile-Manager-create-and-remove-Firefox-profiles

  https://support.Mozilla.org/en-us/KB/how-run-Firefox-when-profile-missing-inaccessible

  https://support.Mozilla.org/en-us/KB/recovering-important-data-from-an-old-profile

  https://support.Mozilla.org/en-us/KB/back-and-restore-information-Firefox-profiles

• How to copy a profile for a child from one device to another family safely direct windows for Windows 7

  How to copy a profile for a child from one device to another family safely direct windows to Windows 7? I have several devices on Windows 7 and my child has ins journal to each device. I want safety to be entirely copied from one to the other devices. How can I do?

  Hello

  Thanks for posting your question on the Microsoft community.

  Thank you for your query details.

  I also appreciate your concerns about security for the family.

  I suggest to read the following article and check.
  Reference:
  http://Windows.Microsoft.com/en-us/Windows/set-up-family#set-up-family=Windows-7

  See also this wiki article created by Lonnie_L on August 24, 2013.
  Family Safety: frequently asked Questions
  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-security/family-safety-frequently-asked-questions/5672f7b2-e3c0-498a-9a6c-c9cab39f68e5

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Copy configuration profile

  I would like to transfer the settings in the profile of one group to another Manager and make changes accordingly to the new group.

  In the application server group templates do not include the settings from the Profile Manager... Weird?

  Anyone know how to copy the settings?

  I'm not aware of a way to do it, but looked in the past for a solution. The attached link talks about setting up a base of reference and then finely adapted to the settings for the new groups that are subsets of the broader what is decided what I try to do.

  But it would still be nice to have a copy command.

  Is it possible to duplicate a profile in the Profile Manager

• Why can't I just copy a profile to another system in the directory profiles and modified the ini file

  My main system crashed. I have a copy of the profile. When I move a copy of the profile in the profiles folder and edit the ini file to use the new name, I get a message that there is an instance of thunderbird running and I need to shut it down. I don't see any instance of thunderbird anywhere in the Task Manager. It happens just for me the fact that I am also in firefox may be the cause of the problem to a running instance. I'm under V31.7.0

  I tried to simply move the mail directory in the existing profile. The thing is that I don't see the old messages. I can see all of the subfolders of the Inbox on the left but not messages in the right pain. I can see new messages, but it's all in the Inbox and not filtered to the subfolder.

  I tried to activate the function of multiple profile but that doesn't seem to work.

  MY BAD
  It seems that I had something that was bad in the profile. I got the profile from a backup and now Thunderbird works fine.

  Sorry that I missed the problem earlier.

• I just reinstalled Debian 6 and Icedove. I copied the profile in my previous installation and update of profiles.ini who has always worked in the past.

  I wonder now to create a new account. Once I have a workaround to default imap and use pop3 I can't open Icedove. I get an error message that Thunderbird is already underway, and I need to shut it down or restart. I can't shut it down because it is not running. pstree and top do not show it so there is no pid to kill. Given zero annoys me to create a new account and the same problem.

  I have never had any problems in the past. Copy the old profile at .icedove and by changing the profiles.ini always gave me my address list and my old emails. Import, said book mail and address were imported, but it didn't.

  I like Thunderbird and hesitate to throw. I don't like Evolution, but I use it maybe and try to recreate my address book. What a waste of time!

  Alaric

  I was not able to find a lock file. However I deleted profiles.ini and it copied from the backup and that seems to work. The lock was probably hidden somewhere in the .default file.

• Copy the profile as a means of backup folder

  I have a simple question:
  copy of my profile from an old computer folder and then paste to the location on your new computer will keep everything? I mean can it replace the backup extensions that are available?

  Yes, with the exception of the Cache. But when you copy data to the new computer, you must copy the contents of the old profile folder in the profile on the new PC folder, replace the files in the profile created on the new PC. The profile name must be the same or Firefox does not recognize.

• Stimulus profile stops logging immediately (custom steps)

  Greeting together again! I use the 2012 here all versions (VS TS, LV and tiara), and I also use for TS VS Custom steps. I have a TS main sequence that does all the work of configuration and custom installation via subsequences and steps VS. The only thing I use the profile of Stimulus for connects at this point, and for some reason any resultant TDMS file holds only six data points (record at 100 Hz). It seems that it starts and stops immediately, and I can't understand why.

  The only steps I have in the profile of stimulus steps Start Logging and group channels. There is no step, newspaper stop, so logging should not stop until the TS of the sequences of the project undeplous, as far as I understand it. Triggered trigger Condition logging is set to none, and file segmentation is set to do not Segment.

  Anyone can shed light on what is happening here?

  If I understand correctly, your profile of Stimulus stops almost immediately, because it is call a step to start recording. After that, the profile is done. Is this correct?

• Stimulus profile editor closes immediately when you try to open the file

  I can open the profile of Stimulus Editor, but when I try to open certain profiles and sequences, the editor closes abruptly.  I recently changed my system definition file, but it seems that it is separate from design and should affect the editor.  Is this a common problem?  How can I solve this problem?  I don't want to rebuild all these files.

  Hi KB_GenMtrs,

  I have a few questions about your request:

  (1) what NIVS version do you use? What version of NIVS where clips and profiles created?

  (2) can create a new sequence of RT or profile without crashing?

  (3) the profile editor of Stimulus crash when opening a specific sequence or profile? If so, can point out you if I try to open it on my side to test if it's recreatable?

  I look forward to your reply.

• Can I copy PsCC profiles between programs on different computers

  I have PsCC on two computers; my desktop and my laptop.  Can I copy, or synchronize, the profile of my desk for my laptop. so I don't have to update the profile on my laptop

  It's the kind of respect the new sync settings feature.  It not work for you?

  

  -Christmas

• need help to copy the profile and find the menu bar.

  I am trying to move my files of thunderbird etc to a new computer and need to do it manually due to hardware problem causing no internet. I tried going in C file and found Thunderbird. No other success find the bar of menus or profile. This is why I have no where to type in the string of words that give instructions. Also instead of 'name' how to find the name?

  I never did move, but this article treats d'it.http://kb.mozillazine.org/Move_to_a_new_PC

• Ramping blamed the parameter in the profile of Stimulus Editor.

  Hello

  I am trying to familiarize themselves with the new Stimulus profile editor and encounter a problem I don't know how to solve.

  I have a model-driven setting. In one of my unit tests that I want to make a mistake on this parameter and the fault should scale the value exactly as the ramp function.

  I can do this within the profile of Stimulus editor himself or how can I do?

  / Johan

  You can do this with a custom real-time sequence. The easiest way would be to make a copy of the sequence of integrated ramp and modify it slightly to a fault of the parameter output instead of a simple assignment. You can open this sequence simply by double clicking it in the palette in sequences. If you open the sequence in real time of the ramp in the standard library, you will see the line where he attributes the current value of the ramp to the output parameter:

  RampOut = (I * Increment) + InitialValue

  All you have to do to change this from a standard to a fault assignment as assignment follows:

  fault (RampOut, (I * Increment) + InitialValue)

  Note there is a bug in the VM of real-time sequence that could not completely error a channel of the system unless another channel is currently failing. The easy solution is to create a dummy user and fault channels it in Manager fault channel of dialogue for the duration of your test.

• Profile of Stimulus running of the door of entry/host

  I would like to know if this is possible:

  Run a VeriStand project on one computer (the ' bridge') and run profiles of stimulus from another computer on the same subnet. I try to do that and specify IP address of gateway of the stimulus profile editor but get the error 307998:

  Compiler error...

  TopLevelSequenceFileDoesnotExist...

  But the sequence files are there. And I know it's to communicate with the gateway, because if I gave a bogus gateway address, I'd get different errors. Are there other details of configurations I need to know to run stmulus profiles to another computer?

  Thank you.

  You can run away from patterns of stimulus on another machine as the host of the gateway, but it requires some work to set it up properly. The problem is that when the stimulus profile specifies to run a real-time sequence, it specifies the file path is the path of the file on the gateway machine, and not on the local computer. So this is the problem, you probably see that the sequence exists on your local computer to the specified location, but not on the gateway machine.

  For example, if your profile of stimulus runs a sequence in real time to "c:\temp\mySequence.nivsseq", then this sequence should be in c:\temp on the gateway machine.

  You can do by storing sequences on a shared network location, which is the same for the gateway machine and the local machine. For example, if you have a file called myFiles server, you can then copy the sequences it and specify the path '\\allFiles\mySequences\mySequence.nivsseq '. It should work, because the path is the same of the local machine and the front door.

  Alternatively, you can map drive paths in Windows of hand and on the other to create the same virtual on the local drive letter and the host of the gateway.

• problem with the copy of the mots de passe from the old to the new machine.copied key3.dd and signons.sqlite from the old to the new profile, but firefox does not recognize their

  a lot of hassle copying old profile to the new machine... Finally overcome bookmarks but failed to get the passwords recognized... followed advice old conversation community how much/little to copy from the old to the new, with no success

  You copy both files to the correct location?

  You can use this button to go to the Firefox profile folder:

  • Help > troubleshooting information > profile directory: opens showing the file
  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  If you still have access to the old computer, then try this extension:

  • Password exporter: https://addons.mozilla.org/firefox/addon/password-exporter/

• Update of Stimulus Legacy profiles to new editor-in-Chief

  Hello world

  I am currently working on the update of a testbed of Veristand 2011 to 2015 SP1. On the bench that we have a lot of Stimulus profile files that were created with the profile of Stimulus editor inherited.

  Is it possible to update the profile of current stimulus editor files and keep their use?

  By looking at the files, I know they are XML, but for some reason, they are completely different formats. It should be possible, however, the translation from one format to the other quite easily. I'm not saying that's what I'll do, just that it is possible.

  See you soon,.

  Pete

  There is not a conversion utility. Here are a few points to note:

  1. the stimulus inherited profile editor is always delivered with 2015 SP1. You can continue to run the same tests in the new version without converting them. New projects by default will not have this tool in the Workspace menu, but you can add it.

  2. If one of your tests is to read CSV files, the same format works in the new Stimulus profile editor.

  Please let us know if there is a particular reason that you want to convert the files to the new format if the notes above don't help you. Who could help us understand a good path for you!