Help necessary after CS4 CS3 installation uninstall problem

Similar Questions

• installation uninstall problems under xp pro. Fix, he says: go, not in Add Remove. don't leave me not re install program

  Due to a major accident due to the power failure during the installation of the driver updates, I had to re install a good large number of programs, one being intelitype pro.

  Made the normal elimination with add and remove, but kept having the program stopped asking for the disc, even if it was in the player and had been directed to it many times.  The program kept appearing and disappearing in the Add/Remove window.  It was not found in the programs.  Finally turned to fix.  I found patches corrupted in the registry and these as well as other repaired registry issues. He also said that it had removed the software.  In re boot and attempt to re installation, I found myself back at the beginning, except that this time, that the file is that neither in the programs, nor add it delete window.  What I'm doing.

  (The accident seems to have illiminated one of my portable usb drive.  It does not show in the Device Manager.  Just, it's sitting there and a strident sound; "but that is another problem).

  Any help would be greatly appreciated.  Thanks in advance.

  Bob.

  Hi Bob,

  1. are you able to install/uninstall other programs successfully?

  2 Microsoft Fixit what you did to solve the problem?

  3 have you tried to connect the USB device to a different port?

  4. where exactly you install the driver? Is it USB or through online?

  We will analyze and identify the cause of the problem.

  If the problem is specific to IntelliType pro, you can perform the steps described in the article.

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

  http://support.Microsoft.com/kb/953691

  Note: After troubleshooting, be sure to set the computer to start as usual as shown here:

  To configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. Click Start and then click Run.

  b. type msconfig and click OK. The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.

  d. When you are prompted, click on restart to restart the computer.

  Hope this information helps. Provide more information so that we can help you.

• After the new installation of El Capitan, Illustrator will not open and says that it requires a certain version of Java. I uninstalled and need assistance, put it back in place, as well as the question of fixing once resettled Java

  After you install the new operating system of El Capitan for my macbook, Illustrator will not open and told me that I had to update my Java. When I followed the link provided with the message that popped up, it would not download on my computer for some reason any. After trying to solve the problem for hours, I finally uninstalled illustrator, but now I can't understand how to reinstall. I need help reinstalling the program and then fix the Java problem once it is reinstalled.

  magroot,

  For the Java download successfully, I think that you look here or here:

  https://jdk8.Java.NET/Download.html

  http://oliverdowling.com.au/2014/03/28/Java-SE-8-on-Mac-OS-x/

  For reassembly, you can download version:

  CC:

  http://www.Adobe.com/downloads.html?promoid=JZEFS

  Before CC:

  http://helpx.Adobe.com/x-productkb/policy-pricing/CS6-product-downloads.html

  http://helpx.Adobe.com/Creative-Suite/KB/CS5-5-product-downloads.html

  http://helpx.Adobe.com/Creative-Suite/KB/CS5-product-downloads.html

  http://helpx.Adobe.com/Creative-Suite/KB/CS4-product-downloads.html

  http://helpx.Adobe.com/Creative-Suite/KB/CS3-product-downloads.html

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  Note: If you have the version CS2 Premium Suite, you need to download the standard and then download Acrobat and GoLive separately under their own serial numbers for replacement.

  Be sure to update, as appropriate:

  Before CC:

  http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Windows

  http://www.Adobe.com/support/downloads/product.jsp?product=27&platform=Macintosh

• Problem to install after effect CS3?

  Hi, I have a problem to install after effect CS3, show me this message:
  Knowing I've installed the program and allow him some time ago in the Applications folder. What should I do? Thank you
  

  First, make sure you have uninstalled After Effects.  Then use the CS cleanup tool before you try to install again.

  Adobe Creative Suite cleanup tool

  helps resolve installation for CS3 thru CS6 and creative cloud problems

  http://www.Adobe.com/support/contact/cscleanertool.html

• Windows empty creative cloud after the first installation. where is the problem?

  Hi all, I have install a creative cloud of the trial for lightroom, but after the windows installation is empty, so I can't install lightroom. where is the problem? can someone help me?

  --

  Arturo

  

  As the primary diagnosis, try to remove the file opm.db once and check.

  Launch the Task Manager, to terminate any process like the creative cloud, CoreSync Adobe related to... etc.

  Then follow the procedure below:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  It will open the Appdata folder.

  Then go to the Local > Adobe > OOBE. OOBE folder and delete "' Opm.db ' file."

  Once you had deleted opm.db fIsland, relaunch the application Adobe Creative Cloud and check.

• Point administrative installation for Adobe After Effects CS3 can it do?

  I want to deploy damage BUT with the included updates?. If an administrative installation is not possible, my next question is this. Updates for Adobe after effects cs3 can be scripted to install in silent mode after the program has been deployed?

  Thanks for any help.

  If you follow the link I gave, you will find the blog and other resources of the team responsible for deployment and install Adobe. They are much more able to answer these questions than those of us here on the After Effects forum who know most After Effects itself, not the surround Creative Suite software system deployment.

• I can not intall Lightroom 4 (I have the license) - he is blocked after a partial installation - error code 2203 (Win 10).  Can you help me please.

  I can not intall Lightroom 4 (I have the license) - he is blocked after a partial installation - error code 2203 (Win 10).  Can you help me please.

  Hi BobPryce,

  Please see: 2203 error when installing the Adobe Creative Suite 4 products, 5 or 5.5 or updates

  Kind regards

  Mohit

• LR4 RC2 is necessary after installation of the LR 4.1?

  LR4 RC2 is necessary after installation of the LR 4.1?

  N ° on a Windows system it will have been replaced by installing 4.1, but I'm not sure on Mac systems.

• Problems with the installation or after a simple installation of vSphere Hypervisor

  Hello

  I'm just testing vSphere hypervisor and went through the VirtualCenter installation program. I made the simple installation. I recently had a class on the hypervisor, so I thought I would give it a shot with a testlab. So far, turn not 100% great. After the simple installation on Windows Server 2012, I'll log on to the device of vCenter Server (5480) and get "this webpage is not available". It seems that I can't access anything that has to deal with vcenter server. The only thing that I know that I can access is the vSphere Web Client to manage hosts, in which he tells me to connect to vCenter server...

  I have install it on 1 virtual machine. Any suggestions? Please tell me if you need more information.

  Community of VMWare YOU thanks.

  Have you tried to access the vCenter Server by using its URL with port 9443 and the username that I mentioned in my previous answer?

  André

• Age of Empires III: Asian Dynasties uninstalling problem

  I installed Age of Empires III and two packs of its expansion. But when uninstalling, I left the Asian Dynasties and proceeded with the other two, and now I can not uninstall the package Asian Dynasties. Even when I try to install all the Asian Dynasties installation program once again, try to uninstall and fails to do so, stating the reason in the form of two missing files. Is it possible to remove the traces of the previous installation, as all the files in the installation directory have been removed?

  Hey aniket_s,

  What are the two missing files?

  You may need to rely on software from third parties to remove the traces of the previous installation of the registry.

  Please use your favorite search engine, and find one that is used.

  Before reinstalling the game, temporarily disable any anti-virus, firewall, anti-spyware software running on your system, then try reinstalling.

  To get help, view your concerns the forum below.

  http://Forum.AgeCommunity.com/forums/default.aspx

  Note: Microsoft cannot guarantee that problems resulting from the use of third-party software can be resolved. Software using third party is at your own risk.

   

  Note: Runs the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Uninstall problem for Adobe photoshop CS and image ready CS.

  HI, I'm running windows 7 ultimate problem with the uninstall Adobe Photoshop CS and CS image ready. When I try the uninstall from the Control Panel, it shows that uninstall Adobe Photoshop CS and image ready CS completed successfully. But it has not been uninstalled. After uninstalling, I restart the computer but it always in the programs and features. Please help me.

  You have an installation CD that can run the uninstaller for you?

  Removal of Windows process «»

  Insert the Adobe Photoshop CS2 CD in your computer's CD drive.

  1. start the removal process.

  As with installation, the first window that appears requires you to choose a language for the installer. After you select a language and click OK, the software license agreement appears. Read the software license agreement. If you agree, click on accept. If you click on decline, Setup will stop.

  Click on install Photoshop CS2 in the main installation screen, click on next to the Welcome screen.

  2 disassembly and repair.

  When Photoshop CS2 is already installed, you have the option to repair the current version, which solves any problem that may have the version installed, or you can remove the currently installed version. Click on delete and click Next. »

  Photoshop help / install/uninstall Photoshop CS2
  http://helpx.Adobe.com/Photoshop/KB/install-uninstall-Photoshop-CS2.html

  http://www.Google.com.au/search?q=uninstalling+problem+for+Adobe+Photoshop+CS&SourceID=IE7&RLS=com.Microsoft:-to THE: IE-address & ie = & oe = & redir_esc = & ei = atJYUJKGJYiwiQfnr4HwDg

• I bought a genuine product Adobe Creative Suite 6 Design Standard about 3 years ago. After the initial installation (with serial number) applications worked well (Photoshop, Illustrator, Acrobat, etc.). However, I could only use Acrobat to a fe

  I bought a genuine product Adobe Creative Suite 6 Design Standard about 3 years ago. After the initial installation (with serial number) applications worked well (Photoshop, Illustrator, Acrobat, etc.). However, I could only use Acrobat a few weeks before the software did not react more. After this time all pdf files can be manually opened with Adobe Reader, but not with Acrobat. Because Acrobat seems to be the default program to open pdf files, nothig happens if I double click on a pdf file, or if a pdf file to be generated from a site Web etc. At the beginning, I was able to reinstall Acrobat from the CD and it would work for a few weeks yet. This has been the case for the past three years. Now, even the resettlement option no longer works and the error message "Is not a real product from Adobe" is displayed during installation. As I said, all the other parts (Illustrator, Photoshop...) work fine and I don't have a product code, serial number etc. What could be the problem and how can I solve this problem? When I uninstall Acrobat, all PDFs open automatically via the Adobe Reader software. But I need more than just to read a PDF file. Help, please!

  Hi Andreas,

  Try the fix mentioned in the KB: https://helpx.adobe.com/creative-suite/kb/acrobat-failed-launch-30-days.html

  Kind regards
  Rave

• I have a new Apple and made a Migration of Applications. data etc old Apple Apple again. Creative cloud gives error re damaged and to download and install again, however, after doing this installation starts but keeps giving the same error re C

  I have a new Apple and made a Migration of Applications. data etc old Apple Apple again. Creative cloud gives error re damaged and to download and install again, however, after doing this installation starts but keeps giving the same error re file creative cloud. How to solve?

  Uninstall, use the CS cleaning tool, and then reinstall.

  Adobe Creative Suite Cleaner Tool allows to solve the problems of installation for CS3 thru CS6 and creative cloud

  http://www.Adobe.com/support/contact/cscleanertool.html

• PC separations with 0xc01a001d after restarting the installation of SP1

  Help please! I installed Vista service pack 1 last nyt via windows update and after installation to restart received the following message;

  PC stops with 0xc01a001d after restarting the installation of SP1... system proven recovery and system restore but nothing helped! I am now reinstall visat using the recovery CD, but will have lost all the data, not great! Why has this happened? I am now very reluctant to reinstall SP1 don't want another weekend busy trying to re-vive my laptop!

  Please advise...

  Thank you!

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 update after the new installation fails

  This becomes a serious problem. I do not believe that Microsoft would intentionally vandalize their own operating system but, that's what I'm thinking... everything to force us to Windows 10. I do a fresh install of Windows 7 Pro x 64 bit on a regular basis and this is a question. The first time that I started to meet it, I studied the problem to find that I had to install some updates before letting Windows try one it automatically. Fine, problem solved. Then, I started having the same problem again. Search again and find ago now more updates, I have to do before letting Windows Update automatically. So now I am back to the drawing board with the SAME FREAKIN PROBLEM. Seriously, Microsoft has to stop screwing of update Windows 7 system. I DO NOT PUT AT LEVEL 10 CRAP! One who knows the most recent updates, that I need to download before you let Windows Update automatically, please post a reply. I currently install the following: KO... 947821, 3078601, 3083710, 3087039, 3102810, 3109094, 3138612, 3145739, 3161664. If I'm missing anything please let me know... also, the system refuses to load the 3172605 (July/August rollup) indicating that it does not apply to the system, even if it should. Yes, I ran the update problems... Yes, I went to COM and reset the appropriate services... Yes, I ran SFC/scannow... No, none of them doesn't help.

  There are essentially 3 updates necessary for a clean installation of windows that you have updated until April 2016

  KB3020369 & KB3172605 and KB3125574 that can all be downloaded from the catalog of $ M using internet explore
  http://catalog.update.Microsoft.com/v7/site/install.aspx

  https://blogs.technet.Microsoft.com/windowsitpro/2016/05/17/simplifying-updates-for-Windows-7-and-8-1/

  To manually install them you will need to ensure that the built in windows update service is stopped, first the Manual value.

  Once you have completed the service back to default, switch