Help-need to perform a major reboot!

OK, so I forgot how to get my rockets to lay restart mode.  Help, please.  I have white screen problems.  Rocket is recognized by the computer, but will not charge.  Please notify.


Tags: SanDisk Sansa

Similar Questions

  • Malware help needed please.

    Hello.

    By mistake, I posted this question in another forum then post again once, hopefully in the right forum now.

    My iPhone suddenly got some malware in it, and everytime I open a site it almost always redirects me to spam / junk sites.

    My phone is not jail broken.

    Can I detect or get rid of this malware?

    Thank you very much.

    Try resetting Safari. Close Safari completely from the window of the selector app by double clicking the Home button and slide up the preview pane of Safari until it disappears from the display. You may need to search the Safari part covering scribbles to the left. Then go to settings > Safari > clear the history and data from the Web site. Then perform a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears.

  • U410 - Wireless worsening performance - requires a reboot for operation

    Hi all

    I recently bought a U410 and I, like many others, am having problems with wireless connectivity. When I got to the laptop, I rarely had no problem with her. However, it slowly deteriorates and the possibility to connect to different networks is getting worse. More I cannot connect or have frequent dropouts.

    The real question, however, is that to be able to connect to a network once again, that I need to do a full reboot. Disabling the network card is not enough, or running the Windows 8 troubleshooting tools. It is incredibly frustrating to have to completely restart to get back online and lose my place in the browsers/documents/etc. Does anyone else know similar problems?

    I tried to contact Lenovo about a refund for my U410, but apparently the window of eligibility has spent two weeks and they refuse to make an exception. Needless to say that after years and years of Lenovo computers this will probably be my last, because performance is so much cheaper as I expect them...

    Thank you

    B


  • Please can someone help, need password CNU9497P2C

    I have the same problem and its driving me crazy... I need the BIOS password because I can't access to this

    [number of Series edited by Moderator]

    Please can someone help, need password

    HP MINI CQ10

    Sweb try.

    e9lovox27e

    3rd letter tiny L.

    4th and 6th letter lowercase o.

    Use this code to go into the BIOS.

    Disable all passwords that are enabled.

    If demand for CURRENT password using this code.

    Request NEW password just press ENTER.

    If asked to hit just to CHECK password to enter.

    Save and exit.

    REO

    I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

  • Need help with movie controls (specifically the reboot)

    Hi all

    Noob question, so bear with me.

    I have a site that loads a page with video playing on one of the pages.  I put it in place so that clicking on the button of the page starts the video and clicking on a button for a another page stops the video.

    However, instead of stop the video she just paused, so that when the user returns to the page with the video the video resumes where it left off, rather than restart.

    My site as a whole is a great movie clip, so each page is not loaded when we click a button - the content is just interpolated on the stage.

    Is it possible for me to have the control to stop the film playing (other buttons on the page) or to start playback of the movie (own page button) to have restart instead of the first image?

    Code for the start is really simple:

    content_mc.about_mc. MyVideo.Play ();

    and the judgment is:

    content_mc.about_mc. MyVideo.Stop ();

    Thank you.  I know I'm asking for the wrong thing because I left speechless Google results with what I ask, helps find the right way to do it is appreciated, even if I like a lot the way the site is designed so preferably not redo the whole site would be great!

    C.

    If you do not use a pause button so you can activate your flvplayback instance autoRewind property the flv file will restart from the beginning, whenever it stops:

    content_mc.about_mc. MyVideo.autoRewind = true;

  • When I try to access something with Adobe Flash, I have to click on the 'f' which turns into a button 'play '. I do not need to perform this step in Safari. Help.

    Is there something blocking Adobe Flash that is causing me to have to hit the play button whenever I want to access a page using Flash?

    Who did it! Thank you very much!!!

  • Need more performance on my Satellite A200 - 23K

    Hello everyone.
    I would like to ask for help, please, because I'm confused. I bought my computer toshiba laptop about 2 years ago. At the time I thought it was a pretty good laptop for games because I wanted a laptop. Now my problem is that I'm confused. Confused performance. I can't play on low etc. My framerate is quite large. I used windows vista. Then after 3 formats, I decided to go back to xp pro. There was a significant change, but still I couldn't go any lower. I would ask a help, is possible to upgrade my laptop for a better? As the purchase of new equipment, or it's useless.

    My characteristics of the model then:
    CPU: Intel Core 2 Duo T5450 at 1.66 GHZ
    Graphics card: Ati Radeon Mobility 2600
    BIOS version: 5.60
    RAM: 2G
    OS: Windows Xp Pro Service Pack 3
    Card mother ID SROSA001.86C.0034.D.0805152046
    Bus Type Intel GTL +

    My computer shows my motherboard as?. These last 2 things are the only information I have. I really need help. My questions are.
    (1) can I put my computer hardware?
    (2) where I can download decent drivers because the drivers of toshiba support are so old. Example ati radeon driver.
    (3) how can I boost my computer's performance?

    So if anyone can help me, I really appreciate it. If you need more information about my hardware please ask. I could really use some help because im so confused. I even downloaded ati tray tools and support toshiba ati driver and I don't even know which use.

    Hello

    > 1) can I upgrade my hardware?

    No, you can't do it. Only you can improve memory and the hard drive. But not the Cpu or gpu. You can read here the article support Tosh:

    http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=13

    (> 2) where I can download decent drivers, because support for toshiba drivers are so old. Example ati radeon driver.
    You can visit radeon ati to get drivers and try to install.

    (> 3) how can I push the performance of my computer?

    You can add more memory, I guess that your model supports up to 4 GB of memory

  • UNMOUNTABLE_BOOT_VOLUME Help Needed!

    When I boot using the Windows XP CD it does not give me the possibility of "R" repair. What can I do now, I try to avoid to format the computer because I have 12 GB of files I need and I can't lose. !

    I can not also go to Mode safe and when I put it on the CD of charges and take me straight on the partition and gives me install options for formatting and another option (I think that its deletion).

    Help please, thanks in advance

    Please provide additional information on your system:

    What is your system brand and model?

    What is your Version of XP and the Service Pack?

    Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

    The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

    You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

    Fill in the blank: my system worked well until: _.

    Looks like you can not try to start on a genuine XP bootable installation CD.
    Maybe you try to start on some kind of restore system CD instead.
    I would like to begin by starting in the XP Recovery Console and checking the integrity of your file system.
    If you need to make a CD of bootable XP Recovery Console, you can do the following:
    Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

    Boot into the Recovery Console Windows using an XP bootable installation CD.

    If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

    This is not the same as recovery disks that may have come to a store to purchase the system.

    You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

    The ISO bootable image file you need to download is called:

    xp_rec_con. ISO

    Download the ISO from here:

    http://www.mediafire.com/?ueyyzfymmig

    Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

    http://www.ImgBurn.com/

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When you start on the CD, follow the instructions:

    Press any key to boot from CD...

    Installing Windows... going to pronounce.

    Press 'R' to enter the Recovery Console.

    Select the installation that you want to access (usually 1: C:\WINDOWS)

    You may be asked to enter the password (usually empty).

    You should be in the folder C:\WINDOWS.  It's the same as the

    C:\Windows folder that you see in Solution Explorer.

    The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

    For a list of the commands in the Recovery Console, type help at the command prompt.

    Start by checking the integrity of your file system by using the chkdsk command.

    In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

    Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

    Assuming your boot drive is C, run the following command:

    CHKDSK C: /r

    Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

    You must run chkdsk/r again until it finds no error to correct.

    Remove the CD, and then type "exit" to exit the RC and restart the computer.

    You have not to set the BIOS to boot the disk HARD since the CD won't be.

    Do, or do not. There is no test.

    I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

  • HP Experts Attn: HP Solutions Center detects not (yet) printer (Advanced help needed)

    1. a brief, descriptive summary:

    "HP Solution Center cannot work because your device installation is not complete."

    After trying all the solutions regarding the installation of devices and software on this forum, I have not been able to solve the problem. However I think I have reduced the problem and require advice from experts on how to proceed.

    Take a step back, all I want to do is to be able to SCAN SEVERAL PAGES, perform OCR (optionally) publish/print in PDF format. If you can advise me how to do this quickly and efficiently without HP Solution Center, I would also welcome. Note the following is NOT valid suggestions because they don't allow me to scan several pages in a single PDF file.

    X Webscanner

    X import/capture to paint

    X Windows Fax & Scan

     

    2. a detailed message with the following information:

     

    Product key information:

    Printer model: HP Photosmart C4700

    Operating system (including service pack revision):

    Windows 7 Home Premium 64 - Bit version. Service Pack 1

    !!!!!!!!!!! IT FIXED!

    The solution - summarized version: do NOT click Finish when you get to this screen, you have to WAIT!

    It is difficult for me to explain exactly when you're ok to click on finish, but I would suggest waiting until the screen below appears.

    If you click on finish prior to this, the installer can start the reboot your machine before the installation is completed. The result is that you end up with missing entries in your registry and the Solution Center may not recognize your device.

    For the more geeky of you, take a look in Manager Perfmance of Windows and check that there is no installation still running process - in the 'Disc' tab, they will start with "hp" for example. "Hpinstall" and others. You can open windows performance management in Windows 7 by typing "perfmon" Dowes search.

    In many other positions I've seen tech guys say "it may take several re - installed to fix the Center ect solution" but I suspect that, in reality, it's a stroke of luck that finally people are waiting until the implementation is really complete instead of click end right now.

    Anyway I hope this helps! See the next post for more tips - I can't believe it finally works!

    HP: PLS SORT ON YOUR INSTALLATION of the SOFTWARE and you must pass by this.

  • Windows 7 does not recognize the DVD drive! HELP need before March!

    Guys, my DVD drive was wrking a few weeks now, it's not. Windows 7 does not detect it shows in my computer or Device Manager it isn't freeking.

    Although, when I start my system, I checked it in the BIOS and it has been detected. So please help me! I need a solution before March 2012...

    Hello

    Do you know if there are major changes or downloads or something like that to the computer until the reader has stopped working?

    Have you tried a system repair on a date where the car worked very well?
    http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  • Error message decode Help Needed

    I get the error message following two devices on my network:

    CRYPTO-4-RECVD_PKT_MAC_ERR: decrypt: mac check failed for the login id = local = remote spi F1E30F16 seqno = D 0000905 = =

    Cisco decodes the message as:

    % CRYPTO-4-RECVD_PKT_MAC_ERR: decrypt: mac check failed for the login id = [dec]

    Explanation MAC check treatment has failed. This may be due to the use of the wrong key to the other party during calculations of MAC. Some might consider cela a hostile demonstration.

    Contact fast action recommended that the administrator of the peer.

    Can someone help me understand this?

    I searched in vain for MAC check treatment, I also checked for calculations of MAC etc...

    I need to know what causes this error, and it's a significant problem. The VPN seems to work, but I lose as a result of this performance?

    Thank you

    Gareth

    If you have verified that your keys are correct, it seems that this could be a bug.

    https://supportforums.Cisco.com/message/708073#708073

  • Help improve the performance of a procedure.

    Hello everyone,

    First of all to introduce myself. My name is Ivan and I recently started to learn the SQL and PL/SQL. Then don't go hard on me. :)

    Now let's move on to the problem. What we have here is a table (a large, but we will need only a few fields) with some information about the calls. 'S called it table1. There is also another, absolutely the same structure, which is empty and we must transfer the recordings of the first.
    The calls short (less than 30 minutes) have segmentID = "C1".
    Longer calls (over 30 minutes) are saved as multiple records (1 for every 30 minutes). The first record (the first 30 minutes of the call) a segmentID = "C21". It's the first time we have only one of them for each different call. Then we have the next parts (the middle one) of the appeal, having segmentID = "C22". We have more than 1 middle part and once again the maximum minutes in every 30 minutes. Then we have the last part (new max 30 minutes) with segmentID = "C23. As with the first, we can have that last part.
    So far so good. Now we need to insert these call records in the second table. The C1 are easy - a record = one call. But those partial we must combine so that they become a single whole call. This means that we must be one of the first pieces (C21), find if there is a middle part (C22) with the same caller/called numbers and with the difference in 30 minutes time, then additional research if there is an another C22 and so on. And finally, we search for the last part of the call (C23). As part of this research we sum the length of each part, so we can have the duration of the call at the end. Then, we are ready to be inserted into the new table as a single record, just with the new duration.
    But here's the problem with my code... The table a LOT of files and this solution, despite the fact that it works (at least in tests I've done so far), it is REALLY slow.
    As I said I am new to PL/SQL and I know that this solution is really newbish, but I can't find another way to do this.

    So I decided to come here and ask for some advice on how to improve the performance of this.

    I think you're getting confused already, so I'll just put some comments in the code.

    I know this isn't a procedure as at present, but it will be once I have create better code. I don't think it's important for now.
    DECLARE

CURSOR cur_c21 IS
    select * from table1
    where segmentID = 'C21'
    order by start_date_of_call;     // in start_date_of_call is located the beginning of a specific part of the call. It's date format.
    
CURSOR cur_c22 IS
    select * from table1
    where segmentID = 'C22'
    order by start_date_of_call;
    
CURSOR cur_c22_2 IS
    select * from table1
    where segmentID = 'C22'
    order by start_date_of_call;   
    
cursor cur_c23 is
    select * from table1
    where segmentID = 'C23'
    order by start_date_of_call;

v_temp_rec_c22 cur_c22%ROWTYPE;
v_dur table1.duration%TYPE;           // using this for storage of the duration of the call. It's number.

BEGIN

insert into table2
select * from table1 where segmentID = 'C1';     // inserting the calls which are less than 30 minutes long

-- and here starts the mess

FOR rec_c21 IN cur_c21 LOOP        // taking the first part of the call
   v_dur := rec_c21.duration;      // recording it's duration

   FOR rec_c22 IN cur_c22 LOOP     // starting to check if there is a middle part for the call 
      IF rec_c22.callingnumber = rec_c21.callingnumber AND rec_c22.callednumber = rec_c21.callednumber AND  
        (rec_c22.start_date_of_call - rec_c21.start_date_of_call) = (1/48)                 
/* if the numbers are the same and the date difference is 30 minutes then we have a middle part and we start searching for the next middle. */
      THEN
         v_dur := v_dur + rec_c22.duration;     // updating the new duration
         v_temp_rec_c22:=rec_c22;               // recording the current record in another variable because I use it for the next check

         FOR rec_c22_2 in cur_c22_2 LOOP
            IF rec_c22_2.callingnumber = v_temp_rec_c22.callingnumber AND rec_c22_2.callednumber = v_temp_rec_c22.callednumber AND  
              (rec_c22_2.start_date_of_call - v_temp_rec_c22.start_date_of_call) = (1/48)         
/* logic is the same as before but comparing with the last value in v_temp... 
And because the data in the cursors is ordered by date in ascending order it's easy to search for another middle parts. */
            THEN
               v_dur:=v_dur + rec_c22_2.duration;
               v_temp_rec_c22:=rec_c22_2;
            END IF;
         END LOOP;                      
      END IF;
      EXIT WHEN rec_c22.callingnumber = rec_c21.callingnumber AND rec_c22.callednumber = rec_c21.callednumber AND  
               (rec_c22.start_date_of_call - rec_c21.start_date_of_call) = (1/48);        
/* exiting the loop if we have at least one middle part.
(I couldn't find if there is a way to write this more clean, like exit when (the above if is true) */
   END LOOP;
              
   FOR rec_c23 IN cur_c23 LOOP              
      IF (rec_c23.callingnumber = rec_c21.callingnumber AND rec_c23.callednumber = rec_c21.callednumber AND 
         (rec_c23.start_date_of_call - rec_c21.start_date_of_call) = (1/48)) OR v_dur != rec_c21.duration           
/* we should always have one last part, so we need this check.
If we don't have the "v_dur != rec_c21.duration" part it will execute the code inside only if we don't have middle parts
(yes we can have these situations in calls longer than 30 and less than 60 minutes). */
      THEN
         v_dur:=v_dur + rec_c23.duration;
         rec_c21.duration:=v_dur;               // updating the duration
         rec_c21.segmentID :='C1';
         INSERT INTO table2 VALUES rec_c21;     // inserting the whole call in table2
      END IF;
      EXIT WHEN (rec_c23.callingnumber = rec_c21.callingnumber AND rec_c23.callednumber = rec_c21.callednumber AND 
                (rec_c23.start_date_of_call - rec_c21.start_date_of_call) = (1/48)) OR v_dur != rec_c21.duration;                  
                // exit the loop when the last part has been found. 
   END LOOP;
END LOOP;

END;
    I'm using version 1.5.5 Developer SQL and Oracle 11 g.

    This is my first post here so I hope it's the right subforum.
    I tried to explain it as deep as possible (sorry if it's too long) and I kinda think that code got a bit hard to read with all these comments. If you want I can delete them.
    I know that I'm missing a lot of knowledge for all the help is really appreciated.

    I thank very you much in advance!

    Hi and welcome to the forums.

    Thanks for posting your code (and using code tags... it's a miracle of a novice!).

    What would be nice would be if you could provide some example data and expected results; as described in the FAQ: {message identifier: = 9360002}

    Your code is very likely to be slow because of the number of nested loops cursor that you use. Which is known in the trade as treatment of rank by rank (more affectionately known as slow-by-slow transformation, as he was known to be slow). It is slow because the PL engine must keep going back and forth between himself and the SQL engine and the INSERT you in a loop called SQL much time to insert data.

    Usually this kind of thing can be achieved by using something like a single INSERT... ... SELECT statement where the SELECT all the treatment that you put in the language PL, or sometimes a SQL MERGE statement if a conditional is sort of insert/update.

    If you post your data so people can get an idea of what is the logic (and have something to test with and know what results should be) then we can help.

  • Help needed immediately.

    Hi guys

    I need someone genuine help desperately.

    I have a project where I need to transfer data from the swf to javascript, and vice versa, I am using flash cs4 and action script 3.0 I can transfer data from as to JS with no problems, but the other way around seems to work I tried it for a while, I even used even adobe externaInterface example code There seems to be a problem.

    can someone help me please in this case, all I want is to transfer data from JS to as. dynamically.

    Thank you

    This is not true.

    ExternalInterface.addCallback("IsStatic",IsStatic) ("js_to_as", onChange);

    /*
    js_to_as() must be a function performed by js.  onChange is not visible to js.

    then, use something like:

    function yourJSF() {}

    thisMovie("yourswfname").js_to_as (parametertopasstoonChange);

    }

    onChange must be an actionscript function that will be called when js_to_as() executes

    */

  • Help needed dynamic query

    Hai I want dynamic query for framing
    CREATE TABLE PI4 (COR varchar2(1),dep varchar2(3),cod_rc varchar2(2))

insert into pi4(dep,cod_rc) values('A01','5C')

insert into pi4(dep,cod_rc) values('DAC','5L')
    HORN must be updated using dynamic query
    as below
    UPDATE PI4         
        SET
     PI4.COR = ’O’
WHERE
     PI4.DEP IN ('A01','A02','A03')
OR
     (
     PI4. dep IN ('DAC','FTS','G12')
     AND
     PI4.COD_RC = '5L'
     )
    sql_stament is that the variable must be set to above code.

    Pls help


    S

    Check below the code where the CO value is assigned dynamically to a p_cor variable

    DECLARE
v_sql_statement VARCHAR2(32767) := NULL;
p_cor VARCHAR2(10) := 'O';
BEGIN
v_sql_statement := 'UPDATE PI4 SET PI4.COR ='||p_cor||' WHERE (PI4.DEP IN (''A01'',''A02'',''A03'') OR (PI4. dep IN (''DAC'',''FTS'',''G12'') AND PI4.COD_RC = ''5L''))';
EXECUTE IMMEDIATE v_sql_statement;
END;

    If you do not need dynamic query to perform the update:

    See the code below:

    DECLARE
p_cor VARCHAR2(10) := 'O';
BEGIN
UPDATE PI4 SET PI4.COR =p_cor WHERE PI4.DEP IN ('A01','A02','A03') OR (PI4. dep IN ('DAC','FTS','G12') AND PI4.COD_RC = '5L'));
END;

    Published by: AP on July 27, 2010 03:39

    Published by: AP on July 27, 2010 04:51: end tag code included

  • video player - help needed

    Hi guys,.

    I am new Director like 8hours inside. I need to create a video player but with a twist. Once the video begins, I need to pause, after some time of game and then play another shorter video.

    Once completed the 2nd short video I need to resume the game from the 1st video!

    OK now, here's what I've got so far. The 1st video playing with a button reading and stop, which both work.

    I see that I could use something like: the piece of code to perform what I need following:

    If sprite (1) .movieTime = 1000 then
    Sprite (1) .movieRate = 0
    -Enter the code for the 2nd video game
    end if

    If anyone can help fill the whites and also where to paste the code, I would be very grateful.

    Thanks in advance.

    Hello

    I moved my project slightly. I inserted the Windows Media Player ActiveX control. It is very good.

    Everything I need to be able to do now is pull video files from the hard drive (this will eventually be a folder or database on a Server Web - evil cross that bridge when I come to him!) and read in the media player.

    Can someone help me with this one?

    Thank you for your help in advance.

    Concerning

Maybe you are looking for