Help needed to validate node parameter

Similar Questions

• I can't read my product key on the back of my laptop and I lost my drive there. My computer also, told me I need to validate to make sure it's a genuine Windows.

  which should I do when I can't read the tag product key on the back of the laptop?

  I can't read my tag of product key on the back of the laptop and I lost my drive there, and my computer tells me I need to validate to make sure that it's a genuine windows and I know that it is. Whenever I have validate, it stays on the screen never validation and doesn't change at all, even for half an hour or an hour, that it remains the same. someone will please understand this and help me...

  Hello

  As you have lost the product key of the Tower, you will need to contact the manufacturer of your computer.

  Ask them to send you a set of recovery disc for your model computer reinstall the operating system to how it was when new.

  The relocation method preceding normally does not require allows you to provide a product key during Installation, the recovery process uses the Installation product key factory to activate automatically during the resettlement process.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  See you soon.

• You will need to validate the format of the time 24 hours with the check constraint.

  Hello

  I need to validate a field in a table with 24 h format. I created forced bellows, but not validating the only of numbers. Pls help me on this.

  ALTER TABLE ADD RESERVATION

  CONSTRAINT CNST_CHK_VB_ACT

  CHECK (regexp_like (law on the ' [[: digit:]] {4}'))

  ENABLE

  NOVALIDATE;

  Rgds,

  Athuru Mithuru.

  Hi, Athuru,

  Athurumithuru wrote:

  Hello

  I need to validate a field in a table with 24 h format. I created forced bellows, but not validating the only of numbers. Pls help me on this.

  ALTER TABLE ADD RESERVATION

  CONSTRAINT CNST_CHK_VB_ACT

  CHECK (regexp_like (law on the ' [[: digit:]] {4}'))

  ENABLE

  NOVALIDATE;

  Rgds,

  Athuru Mithuru.

  Let's start by defining precisely what you want.  For example

  1. The 1st character can be 0, 1, or 2.
  2. The 2nd character can be any number EXCEPT if the 1st character is '2', then the 2nd character must be in the range ' 0 'to 3'.
  3. The 3rd character can be '0' and '5'
  4. The 4th character can be any digit.

  It's pretty simple code like a regular expression with the exception of the exception in the 2.   Here's a way to get around that:

  REGEXP_LIKE (law on the)

  , ' (' || -options for the first 2 digits of start

  "([01][0-9])' |" --0 or 1, followed by another digit

  '| (2[0-3])'    || -2 followed by 0, 1, 2 or 3

  ')'              || -end of the options for the first 2 digits

  '[0-5]'          || -any digit between 0 and 5

  '[0-9]' - a figure

  )

  As others have said, think about the type of data.  How will you use this column?  If you really need a column which reflects a time of day, but not special, then perhaps an INTERVAL, or a NUMBER (for example, the number of hours after midnight) rather than a string.

• JavaScript application: I need to validate 1 page of a multipage requiring field doc are not empty.

  Here is the Javascript code I have so far and it is not working properly.

  He's back "Zip" when any required field is empty and it won't accomplish what I want to do because I need to validate that a single page of a 10-page document.

  Any help would be gladly appreciated.  I'm definitely on the bus of struggle.

  var emptyFields = new Array(); Table to contain the names of incomplete fields;

  var oField; a variable that contains the test field object;

  var numArray = [1, 2, 5, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 21, 25, 26, 31, 32, 33, 35, 36, 37, 38, 39, 43].

  for (var i in numArray) {}

  oField = this.getField (this.getNthFieldName (i));

  If (oField.type! = "button" & & oField.required ") {}

  check according to the type of field

  {Switch (oField.type)}

  case "button":

  break;

  case 'checkbox ':

  case 'radiobutton ':

  If (oField.value == oField.defaultValue & & oField.value == "Off") emptyFields.push (f.name);

  break;

  case "combobox":

  case "listbox":

  case 'text ':

  if(oField.Value == oField.DefaultValue) emptyFields.push (f.name);

  break;

  case "signature":

  if(oField.Value == oField.DefaultValue) emptyFields.push (f.name);

  break;

  by default:

  App.Alert ("Field not processed" + oField.name + "type" + oField.type, 1, 0);

  break;

  }

  }

  }

  If (emptyFields.length > 0) {}

  App.Alert ("error! ("You must fill in the following fields: \n" + emptyFields.join ("\n"));

  }

  Here is my final product for sharing:

  var emptyFields = []; Table to contain the names of incomplete fields;

  var oField; a variable that contains the test field object;

  var numArray is ['field1', 'Field2', 'field3'];.

  var index = 0;

  var len = numArray.length;

  Console.println ("length of the array:" + len);

  for (var i in numArray) {}

  Console.println ("Index:" + index);

  Console.println ("numArray:" + numArray [i]);

  oField = this.getField(numArray[i]).value;

  Console.println ("oField:" + oField);

  ++ index;

  check according to the type of field

  If (oField == "") {}

  var a = this.getField(numArray[i]).valueAsString;

  Console.println ("Value:" + a);

  emptyFields.push (numArray [i]);

  }

  If (index == numArray.length & emptyFields.length > 0) {}

  App.Alert ("you must fill in the following fields: \n" + emptyFields.join ("\n"));

  }

  }

• Need to validate the syntax of the url by using the functions of DBMS

  All,
  
  I need to validate the syntax of the url in a table. Please suggest is there any function of DBMS is available to do
  action in PL/SQL, stored procedure. Help, please.

  use regular expressions... check by using the following in regexp_like...

  ^ http\: / / [a-zA-Z0 - 9-------.] +. [a-zA-Z] {2,3} (/ \S*)?$)

• Display the names and values of the parameters in the node parameter of forms

  Hello
  
  Is it possible to loopback programmatically via the node parameter forms get the name and value of each parameter. I don't know the name of the individual parameters in advance. I want to display the parameter names and values on a help screen generic as each of our reference forms.
  
  I could do somewhat similar code to display all names of block in a first_block get_form_property property and nextblock property get_block_property is formed. I can't think in the same way as the parameter names and the values of the list if.
  
  Any suggestions would be welcome.
  
  Thank you
  
  Neil

  No, there is no standard built-in to browse Forms settings.

  François

• I get I need to validate the widows XP with service pk 3

  I get the error message that I need to validate my windows XP How do that?

  First, check the settings of your system regional and the date and time (and year!). -put correctly.

  Then open Internet Options and access to advanced settings - click on the button.them 'Restore advanced settings', apply and OK on.

  Then return to the diagnostics page and verify that everything is now green.

  Then try posting to the www.microsoft.com/genuine/validate

  If it still doesn't work, post a MGADiag report in your OWN NEW thread.

• Please can someone help, need password CNU9497P2C

  I have the same problem and its driving me crazy... I need the BIOS password because I can't access to this

  [number of Series edited by Moderator]

  Please can someone help, need password

  HP MINI CQ10

  Sweb try.

  e9lovox27e

  3rd letter tiny L.

  4th and 6th letter lowercase o.

  Use this code to go into the BIOS.

  Disable all passwords that are enabled.

  If demand for CURRENT password using this code.

  Request NEW password just press ENTER.

  If asked to hit just to CHECK password to enter.

  Save and exit.

  REO

  I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

• RequestDataValidator help needed

  I am tring to write a RequestDataValidator to change the model. When the user changes his profile, I need to validate the entry of the Division/Department/team and make sure it is a valid Div/Dept/team.
  
  I can get access to certain attributes in the validator, but when I try to get the attribute Division/Dept/Team I always get null.
  
  Examples of code or the pointer will be much appreciated.
  
  See you soon
  Eash

  You can browse the data with this:

  LOGGER.log (Level.INFO, "validate: eventType [" + requestData + "]" "");
  List reqEntities = null;
  reqEntities = requestData.getTargetEntities ();

  for (RequestEntity re: reqEntities) {}
  String entityKey = re.getEntityKey ();
  LOGGER.log (Level.INFO, "Entity key [" + entityKey + "]");

  List of rEAs = re.getEntityData ();
  for (RequestEntityAttribute rea: rEAs) {}
  String attrName = rea.getName ();
  LOGGER.log (Level.INFO, "Attribute name [" + attrName + "] attribute value [" + rea.getValue () + "]");
  Insert if exposed here to check domain and perform validation.
  If (...) {
  String msg = "Note information .text:invalid [CUSTOM_ERROR_MESSAGE].";
  InvalidRequestDataException ex = new InvalidRequestDataException (msg);
  throw ex;
  }
  }
  }

  -Kevin

• Help needed in the parameter validation and ownership

  Hello Denzz/Dupont,

  Sorry for the confusion between you guys, but please find a new parameter of condition that I need for a property evaluation and validation above top of it.

  I have 2 Essbase property i, e Essbase.ASO.DataStorage and Essbase.BSO.DataStorage that are defined with the default as empty from now.

  I want to do it derived property satisfying the scenarios below.

  (1) all the Member of sheet under hierarchy account should be Essbase.ASO.DataStorage = Nevershare

  All the Limb Member of the hierarchy that account must have Essbase.ASO.DataStorage = StoreData

  (2) all the leaf Member of the hierarchy that account must have Essbase.BSO.DataStorage = Nevershare

  All the Limb Member of the hierarchy that account must have Essbase.BSO.DataStorage = DynamicCalc

  (3) as it is requested to the point 2, all the sheet military under the hierarchy ought to have Essbase.BSO.DataStorage = Nevershare

  (with condition applied here)

  Essbase.Bso.Formula property if it is filled or have all the values in it, then Essbase.BSO.DataStorage should be replaced by DynamicCalc

  Alternatively it can be Nevershare if Essbase.Bso.Formula property is empty.

  
  

  
  

  I also want a parameter validation here, if the user tries to change all values in these two different properties of the derived value, then it should give them a validation error.

  
  

  Yes it would be then that node add and that was my main reason to ask if it worked - the fire

  The thing is it prevents the two properties ASO and storage BSO to have empty values and while creating nodes these accessories will be empty

  OK try this-

  If (PropValue (Core.Leaf),

  And)

  If)

  IsBlank (PropValue (Custom.Essbase.BSO.DataStorage)), it's true.

  If)

  IsBlank (PropValue (Custom.Essbase.BSO.Formula)).

  Equals (String, PropValue (Custom.Essbase.BSO.datastorage), Nevershare),

  Equals (String, PropValue (Custom.Essbase.BSO.datastorage), DynamicCalc)

  )

  ),

  If)

  IsBlank (PropValue (Custom.Essbase.ASO.DataStorage)), it's true.

  Equals (String, PropValue (Custom.Essbase.ASO.datastorage), Nevershare)

  )),

  And)

  If)

  IsBlank (PropValue (Custom.Essbase.ASO.DataStorage)), it's true.

  Equals (String, PropValue (Custom.Essbase.ASO.datastorage), StoreData)

  ),

  If)

  IsBlank (PropValue (Custom.Essbase.BSO.DataStorage)), it's true.

  Equals (String, PropValue (Custom.Essbase.BSO.datastorage), DynamicCalc)

  ))

  )

• Array as parameter of output for procedure - help needed.

  Hello
  
  I'm having a procedure that calculates 6 medium.
  
  Now, can I get these 6 values as output parameter using an array.
  
  Help, please.
  
  Thanks in advance.
  
  Concerning
  Rambeau

  Did you not find this thread and be useful?

  Re: Return of the associative arrays in a stored procedure

• Collection as parameter - help needed

  I have a collection that contains about 10 documents of type number, and varchar.
  Now, I want to spend this collection as an input to another procedure parameter,
  and you want to calculate maximum, minimum and average values in the collection.
  
  Please tell me how I can make it happen.
  
  Thanks in advance
  
  Concerning
  Rambeau

  Yes you can. Just try it :-)

  Thank you
  knani.

• Collection as a parameter in the function - help needed

  I have a function that returns 3 different values according to a given in parameter.
  Now, I want to return these three values.
  Instead of using three out parameters, how can I use a collection for return values.
  
  Please tell me the best way that returning multiple values (more than 3)
  
  Thanks in advance
  
  Concerning
  Rambeau

  SQL> create type my_obj as object (no integer, name varchar2(10))
    2  /
  
  Type created.
  
  SQL> create type my_tbl as table of my_obj
    2  /
  
  Type created.
  

  functional approach...

  SQL> create or replace function my_fn return my_tbl
    2  as
    3     ltbl my_tbl;
    4  begin
    5     select my_obj(1,'karthick') bulk collect into ltbl from dual;
    6
    7     return ltbl;
    8  end;
    9  /
  
  Function created.
  
  SQL> select * from table(cast(my_fn() as my_tbl))
    2  /
  
          NO NAME
  ---------- ----------
           1 karthick
  

  procedureal approach...

  SQL> create or replace procedure my_proc(ptbl out my_tbl)
    2  as
    3  begin
    4     select my_obj(1,'karthick') bulk collect into ptbl from dual;
    5  end;
    6  /
  
  Procedure created.
  
  SQL> declare
    2     ltbl my_tbl;
    3  begin
    4     my_proc(ltbl);
    5
    6     for i in 1..ltbl.count
    7     loop
    8             dbms_output.put_line(ltbl(i).no||'      '||ltbl(i).name);
    9     end loop;
   10  end;
   11  /
  1       karthick
  
  PL/SQL procedure successfully completed.
  

• Procedure with the collection as a parameter-help needed

  I have records like below:
  
  Add time of Rol
  ---------------
  A1 08:20
  A2 08:25
  A2 A1 08:29
  A2 A1 08:32
  A3 08:45
  A3 08:46
  A3 08:50
  
  I have a scenario where I have to calculate the average_time based on a scenario.
  The formulas that we have to calculate the average is:
  (min (next_address) - max (previous_address)) * 0.55
  that is, for example, form 5, (08:45 - 08:32) * 0.55.
  Here in my procedure I am passing the TDA and Rol as input parameters collection.
  How can I go and calculate the value of average_time is now.
  
  I tried with
  For I in Add.count
  loop
  v_avg_time: = (Add(I+1) - Add (I)) * 0.55;
  end loop;
  
  When I want to test this, I am not knowing how to pass values to the procedure.
  Please tell me how to run the procedure and how to get the results.
  
  Thanks in advance
  
  Concerning
  Rambeau

  Try like this.

  SQL> create or replace type my_num as table of number
    2  /
  
  Type created.
  
  SQL> create or replace procedure my_proc (pNum my_num)
    2  as
    3     lsum number;
    4     lavg number;
    5  begin
    6     select sum(column_value), avg(column_value)
    7       into lsum, lavg
    8       from table(cast(pNum as my_num));
    9
   10     dbms_output.put_line('SUM: ' ||lSum);
   11     dbms_output.put_line('AVG: ' ||lAvg);
   12  end;
   13  /
  
  Procedure created.
  
  SQL> declare
    2     lNum my_num := my_num(1,2,3,4,5,6,7,8,9,10);
    3  begin
    4     my_proc(lNum);
    5  end;
    6  /
  SUM: 55
  AVG: 5.5
  
  PL/SQL procedure successfully completed.
  

  Thank you
  knani.

• help on event data node

  How do you find help on the various members of the node of event data in a Structure of the event.  For example, 'Time' seems to be a number of seconds after a few references, but I can't find any help about it.  Thanks in advance.

  The help is there, but buried.  Consider an empty event Structure, which looks like this:

  

  Buried using the event Structures is this Note: for more information on the elements of event data, click on the Details link in the case of subjects of class descriptions of the event control, Application componentand VI .  Note the three links (to get help).  Timeout being event pane ID, I clicked on this link to get to the Help Page of Application events, where, under the first registration, Activation of the Application, there is a link to Details .  By clicking on that got this:

  

  who says that time parameter is simply the clock of millisecond corresponding to the time where the event occurred.

  Yes, the information is there, and Yes, Altenbach is true it might be just a little more accessible...

  Bob Schor