Help of local Internet Conection only

Similar Questions

• Whenever I try to connect to my internet I get 'local internet only' and when I try to repair it it says that there may be a problem with your dns server.

  problem with connecting to the internet

  whenever I try to connect to my internet I get 'local internet only' and when I try to repair it it says that there may be a problem with your dns server, I looked for a solution for centuries now, and no one can seem to help me! Please someone help me?

  Hello

  First off I'm going to assume that when you say "local internet only", you really mean "local only". Also, I'll assume you are using a router for internet connection broadband. If I am wrong, then you will have to describe the answer how you try to connect to the internet more in detail.

  First of all, your router. The indicators show that there is an internet connection? Consult the manual, which probably came on a CD with the router. Internet connection led can resemble a planet with rings or a circle with a lower-case i in the middle of it, or some other symbol. It can also have a caption saying 'internet' or 'connected '. If the router is not connected while your PC will not have access to the internet.

  Click the Start button and type "cmd" then press ENTER. In the window type (mainly black) which results in ipconfig and press to enter. Transcribe the results of the command ipconfig for a response.

  Your (wired or wireless) network card is set to automatically get an ip address? Otherwise, set it to do that and also to get information from DNS server automatically...

  • Right-click on the icon network at the bottom right of your screen, and then click Network and sharing Center
  • In network and sharing Center, click on manage the network connections (on the left)
  • Right click on 'Connect to the Local network' or 'Wireless Network Connection' depending on how you connect to the router
  • Click on select Internet Protocol Version 4 (TCP/IPv4), and then click the properties button
  • If things are not set to 'automatic', please note all numbers so that you can restore the settings if necessary
  • Make sure that "Obtain an IP address automatically" and 'DNS server automatically get an address' is selected, then click OK
  • Click on close

  If you are using a wireless connection, what happens if you try to connect to your router with an Ethernet cable?

  Please post back with your comments to the above and give more details about your configuration, i.e. router brand and model (or another material of Internet), if you connect wireless or with an Ethernet cable, etc. etc.

  Tricky

• I do not see any video like youtube, vimeo, facebook even site. My flash player is installed and it is a job because I still can see the video in Internet Explorer only on Firefox it audio only not working, the video is blank (black) all, someone can help

  I don't update or download anything, so today, I can't see any video like youtube, vimeo, facebook even site. My flash player is installed and it is a job because I still can see the video in Internet Explorer only on Firefox it audio only not work, the video is all blank (black).
  When I restart my PC again the video can work just first video, then when I see another video site it's all black... (but its still working)
  can someone help me?

  Hi splingun,

  We have a section of fixing Facebook and YouTube. The black screen seems expressly included in the list of the articles I linked to you.

  Hope this helps!

• Need help solving any internet connection. This happened to me several months ago and the supplier

  Need help solving any internet connection. This just started today, but it's happened to me several months ago and at that time the provider thought it was software related and suggested that I have to contact HP. I have a HP 2006 m7674n, Windows XP. For several days, I worked with HardBeatZ on a different issue that has been resolved today. However, for several days, I had been working msconfig to track down the cause of the problem; This resulted in several reboots the computer - this would have something to do with it? Also, I just started getting a RUNAS box popping up. HardBeatZ has provided a link to a possible solution to this, but since I can't do internet connection I can't get the fix. Right now I'm on a laptop with Wi - Fi for the same service internet/modem as my PC. I changed nothing onmy PC in the last days of several for the internet connection or services.  I always use eithernet connection from the router to the computer. I tried Wi - Fi today with my PC but not connect. I tried to unplug the router and reconnect but it does not solve the problem. I did a Network Diagnostic and printed the report; Here are the warnings and error messages in this report:

  1. under the terms of the bridge diagnosis; Warning: "www.microsoft.comcould hostname not be resolved (0x2afc error code). Could be the gateway or DNS problem.

  2. under diagnosis of layer IP; Corrupted IP routing table. Default route, road closures, route host itinerary local subnet and local are all valid; Invalid entries in the ARP cache. ACTION: the ARP cache has been emptied. »

  3. UNDER HTTP, HTTPS, FTP Diagnostic; all three had this warning: ' 12007 connection error at www.microsoft.com: the server name or address cannot be resolved. " and the error was unable to establish a connection.

  Still under network adapter diagnosis; It shows the connection status of network as "connected."

  Also, I have an older computer that I connected with eithernet and was able to connect to the internet but has been disconnected because the version of Windows is too old to support the connection. But I could briefly connecting on HP website before you log out. The point being I think it's a computer problem and not an internet router or provider problem.

  I read a few entries on this site and it seemed that the recovery of the system was the only solution. I hope that there are other things to try before I resort to that.

  I would appreciate any advice on the steps to diagnose the problem and insight as to what may have caused this to happen. Thank you. dt2012

  Sorry... still with you... OK, we know that your network card is good and we know that your first post;

  1. under the terms of the bridge diagnosis; Warning: 'host www.microsoft.com name could not be resolved (0x2afc error code). Could be the gateway or DNS problem.

  2. under diagnosis of layer IP; Corrupted IP routing table. Default route, road closures, route host itinerary local subnet and local are all valid; Invalid entries in the ARP cache. ACTION: the ARP cache has been emptied. »

  3. UNDER HTTP, HTTPS, FTP Diagnostic; all three had this warning: "error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved." and the error was unable to establish a connection.

  4. still under network adapter diagnosis; It shows the connection status of network as "connected."

  For me, it seems that Internet Explorer is corrupted or damaged. Your computer is shipped with Microsoft Windows XP Service Pack 2 Media Center Edition 2005 but since you can have updated to XP SP3 or upgraded to a newer version of Internet Explorer. Please try the options listed in this document to Microsoft titled "how to reinstall or repair Internet Explorer" , since there are several options depending on your system configuration, please post if you need help to solve your problem.

• problem with internet conection shop said that it looks like a hardware problem and told me to contact you

  laptop light shop and was asked to check the internet connection, he tried his, but he said that without internet conection will not work even the wireless

  Hello

  If it's a hardware problem, then it can be fixed on the Internet forums.

  Try another store that could be more sensitive to decent work.

  If not, maybe this can help.

  http://www.ezlan.NET/wireless.html

• The Internet is only going slowly on this computer, it used to be fine

  I currently have windows XP, and my internet has suddenly slowed down my internet is only going slowly on this computer, none of the other computers I have connected to the internet suffer all pass 100% only this computer and I ran virus scan using microsoft security essentials and malware bytes. nothing is coming so I know that I do not have a virus that he used to run perfect

  With the button straight on the your connection to the network folder icon. Check the properties to make sure that everything matches settings on other computers. Then, right-click on the connection icon in the taskbar and choose to run network diagnostics. If this shows / detect anything unusual, try this link for help with your windows Explorer. It's the novelty of MICROSOFT, fully automated Center help and support, and he is free to access and use. 'http://support.microsoft.com/fixit/default.aspx '. "THE BEST THING TO DO IN THIS WORLD IS A WRONG ANSWER! «' I 'NOT' WINDOWS...» »

• How can I make my pc recognise my internet conection?

  Original title: network programs network networking Internet Web site Site Web Web Site URL

  How can I make my pc recognise my internet conection

  Hi Lindajohns,

  You can consult the following Microsoft article and check.

  What do I need to connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/what-do-I-need-to-connect-to-the-Internet

   

  To connect to the Internet

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-the-Internet

   

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  Should which modem I use to connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/which-modem-should-I-use-to-connect-to-the-Internet

  Let us know if it helps.

• Can I reset all the settings on the parameters of local internet connections?

  I have something connected on my commputer and it changes a lot of adjustment under local internet connections. I was wondering I could just reset everything.

  • Vista Windows

  Hi mickquig,

  Yes, you can accomplish this by resetting TCP/IP (Transmission Control Protocol / internet protocol), to do so; Just run the fixit available in the link below:

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect to wireless internet; can only connect to the network, saying "Local only" or "limited connectivity".

  I have problems to connect to any wireless internet - home, library, coffee shops.  He used to work, began to get in trouble (i.e. could not connect sometimes to the diner, but works in the library) and now does not connect to internet AT ALL wireless.

  Only connects to the network saying "local only".  And I'm lucky even get that much.  Furthermore, I don't know if it's a router problem or what, but it does not even accept the password for my home network (my boyfriend has no problem on the internet with Windows 7 and the current router password).

  I use a HP G60 laptop (maybe?), I don't remember the model exactly.  Windows Vista.  I am frustrated beyond belief.  I took the computer to Best Buy and the man suggested that contact Microsoft because, in his own words, "this seems to be a very common problem with the adapter wireless in Windows Vista".

  In summary: is it a hardware or a software problem?  It seems to be a software problem that can have an impact on the material.  Nevertheless, what can I do to fix this?  Y at - it a software update, I need to try for my wireless card?

  This computer is not yet a year old, and already I am unable to use it for the internet.  Not very well I plug my ethernet cable router wireless in the library.  I bought a laptop for a reason, but it is on track to achieve more like a desktop.  Very disappointing.

  Someone, please help!

  I took the computer to Best Buy and the man suggested that contact Microsoft because, in his own words, "this seems to be a very common problem with the adapter wireless in Windows Vista".

  Is this a hardware or a software problem?  It seems to be a software problem that can have an impact on the material.  Nevertheless, what can I do to fix this?  Y at - it a software update, I need to try for my wireless card?

  Hello

  When the man from BestBuy, fortunately for us technology is not a cleaning product, there is no way of knowing if someone puts his hand on it and knowing what is wrong rather than moving oral reprimand...

  First step, log on to the HP support and download the latest drivers for your wireless card.

  The HPG60 is a very good phone but its wireless card has problems with old drivers.

  In which case it's a hardware problem, contact HP support.

  In general, you can use this process to find out what's wrong with the wireless.

  Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

  Check the Device Manager for the wireless card valid entry.

  http://www.ezlan.NET/Win7/net_dm.jpg

  If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

  Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

  http://www.ezlan.NET/Win7/net_connection_tcp.jpg

  Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

  When the work turns on the Wireless security.

  Note * people sometimes make mistakes in writing and retype the password for security.

  Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

  --------------------------------------------------

  I really checked and configured every thing and it doesn't work.

  Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
  some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Internet access only in safe mode with network! Help!

  I can access the internet and open a Web page in SafeMode with network. When I try to open a Web page in normal mode, I can't. I looked at the diagonisic and it says that my firewall or something is not allowed my HTTP port 80 and HTTPS 443 port and port 21 FTP to open or access. I went into my settings of firewall and turned all these, but I have not yet been able to get access to the internet.  HELP PLEASE?

  Hello

  (1) remember you to make changes to the computer before this problem?

  (2) that you get error messages when you access internet in normal mode?

  I suggest you follow these methods and check.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: If the method above does not work, you can put the computer in the boot and check.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Thank you

• No local/internet access

  I have a NX700 with a built-in wireless function. When I go through the Setup program tries to connect to the internet, he noted only that the wireless connection was working, and internet access and local access failed. Also, if I try to use a wired connection - it's the same thing: it acknowledges the wired connection, but the local access and access to the internet that these two don't. It is not my router because other devices work. I spent 90 minutes on the phone with care, and they think that I must return to my tv.

  I adjusted the security settings on the router, and it does not help. If anyone has suggestions on what to do, it would be greatly appreciated, because the back tv will be a chore.

  Thank you!

  I have the KDL40 - NX711 Wifi Tv and I have experienced the same problem when I changed my router. I am owner of a Netgear WNDR3700 and I had to exchange it because it was defective. The new router is exactly the same, and the TV can detect the SSID broadcast. When I entered my passode, TV would set up and come back with the message that Internet OK, has no Local access and Internet failed. It took several calls to Sony (who have no idea), Netgear and Comcast to realize that nobody could help. Eventually, I realized that I had to do a manual install and provide my TV with the primary IP address, subnet, default gateway and DNS address. I did not allow the proxy server at all. I was able to get this information through the control panel under Windows Vista. Click Network and sharing icon, under the wired home network click State view. Click the property box in the local area network box. The IP initially did not work, because it was already used by other wireless devices in the House. For example, I used 192.168.1 and TV it back foot. I logged on Netgear to see what devices were in use on which IP address, and I changed the last digit to a 192.168.8 (8), which was open. I hope this helps.

• Windows XP cannot see that the internet can only see LAN

  We have a small network in my house. My router was set to WEP security (I know its too old, but my windows xp laptop computer does not work with WPA or newer). And I also added mac filtering for more security addresses. This network has worked well for 2 years.

  Meanwhile in a cell phone (that has windows XP sp3) so its wireless network broke, and we couldn't get living, then we just plugged on the router via a cable.

  Recently I had to reset my router because I forgot a password and I could add anything to the mac filter list.

  After that, I put at 'the original' for example WEP + mac filtering (only the passwords have been changed).

  Now everything is working fine, 2 laptops (both Windows 7 a), 2 readers, network all our phones smart etc can connect again, the only laptop (with Windows XP) problem.

  The XP laptop can see LAN (two disks) and router only (ping works), but in any browser (firefox, chrome, iexplorer) give me a Web site cannot loaded in the background: error 105, Err_name_not_resolved.

  I tried names ping (google.com) and different ip addresses (for example my ISP dns server address) but I get no answer 100% packet loss. I tried a lot of things that they did not help

  (1) has tried to change my XP for some fix + fix dns ip (I found these adressis in my router configuration/network configuration)
  (2) then I put back to dynamic ip once again in the line of cmd ipconfig release, ipconfig/reset, etc., I checked all addresses was going well everywhere (I mean gateway, DHCP server, dns server, looked well with dynamic ip too)
  
  (3) then I found similar position
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-Networking/cannot-ping-outside-my-local-network/de73a1f9-ef4b-E011-8dfc-68b599b31bf5
  so I tried also what is in the post
  "netsh winsock reset" "netsh int ip reset" then "ipconfig/flushdns" then restart computer

  Nothing helped so I registered here, maybe I answer.

  you might need this information:

  the laptop has Windows XP service pack 3 language _german_
  Cisco EPC2425 router is
  The two networks wdstorage discs + mybookworld... I think they are the two Western Digital stuff. I'm not sure, I can look after if its important (I don't think)
  So, I got two disks still attached. (so 3 connection of the UTP in the router is used, two for disks for the windows XP laptop)

  If something is not clear, ask me please

  
  Thank you for your answer
  Robert

  Hi Robert,.

  Thank you for updating us the status of the case.

  I suggest that temporarily disable you the firewall.

  I recommend you to test name resolution

  A DNS server provides host name resolution. If you cannot connect to a server on the Internet by using its FQDN, there could be a problem with the DNS configuration of your dial-up connection to your ISP or DNS server of your ISP.

  To determine if there is a problem with the DNS configuration of your dial-up to your ISP connection, follow these steps:

  a. at a command prompt, type ipconfig/all, and then press ENTER to display the IP address of your DNS server. If the IP address of your DNS server does not appear, contact your ISP for the IP address of your DNS server.

  (b) to verify that your computer can communicate with your DNS server, ping IP address of your DNS server. The response looks like this:

  Rattling #. ###. ###. # with 32 bytes of data:

  Response to #. ###. ###. #: bytes = 32 time = 77ms TTL = 28
  Response to #. ###. ###. #: bytes = 32 time = 80ms TTL = 28
  Response to #. ###. ###. #: bytes = 32 time = 78ms TTL = 28
  Response to #. ###. ###. #: bytes = 32 time = 79ms TTL = 28

  The series of digital signs (#. #. #. #) represents the IP address of the DNS server.

  If you can't ping the IP address of the DNS server successfully, contact your ISP to verify that you are using the IP address and the DNS server is working properly.
   
  When you have verified the correct IP address of your DNS server, update the settings of your connection to your ISP's dial-up TCP/IP. To change or add a valid IP address for your DNS server for a dial-up Networking phonebook entry, follow these steps:

  a. in Control Panel, double-click network connections.

  b. right click on your Internet connection, click Properties and then click the network tab.

  c. click the Internet Protocol adapter, and then click Properties.

  d. click use the following DNS server address, and then type the correct IP address in the preferred DNS server box.

  e. click OK, and then click OK again.

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Local internet connection failure? Display limited or no connectivity.

  In my system cannot be connected to Internet Local. Only the limited connectivity message display or none. Please give a solution for this problem.

  Hello

  Maybe this can help, http://www.ezlan.net/debug.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• help with local wrt54gs single message

  Greetings:

  I have the wrt54gs v7 router and it keeps on give me that only local message whenever I tried to connect to internet wirelessly... it is also telling me I have no internet connection, what I do, if I unplug the router and plug my modem dsl directly to my computer... ive tried everything ping to ipconfig to change the settings of the reset of the router a million times... I used to use this router on another laptop running windows xp and now I have vista and it won't work little matter what I do and how much forum messages I try to follow... any help will b appreciated!

  As this is your DSL Internet Service follow this link .

• need help with my internet

  Hi my laptop is impossible to connect to the internet, it has not worked for about a months, it was ok 1 day then the next day that he was not now when I try to connect to the internet it is said only local or network ANDS sometimes schooner he said I a limited connectivity and there is a red cross between the bunidentifed and the internet wat does that mean when I click fix promblem it happens automatically get new ip for the network for the adapter settings, he also said that there could be a problem with one or more of your network card on my computer can your help me please thanks :)

  Hello andyt2010,

  I suggest you try the mentioned below of the methods to help you solve the problem:

  Method 1:

  1. click on start. Type cmd in the search box and press ENTER.

  2. at the command prompt, type the following command and press ENTER:
  ipconfig/all (there is a space between ipconfig and /)
  The command ipconfig/all command displays for all your network adapters, TCP/IP in Windows settings.

  3. If your IP address of your Local network connection is 0.0.0.0 or 169.x.x.x (where x is a number any), then your computer is not getting an IP address from the router.
  If this is the case, try this:

  ·         enough to the command prompt ipconfig and press ENTER

  ·         ipconfig / renew in command prompt and press ENTER

  The test again by typing ipconfig/all to see what is the address?  If the address is still not correct (if you are on a router, it should start by or 192.168.0.x or 192.168.1.x 10.x.x.x)

  Try the below mentioned links and articles to solve.

  Method 2:

  You can try to update the network adapter drivers only if you have a backup for the driver CD.

  4. click on start. In the search window, type Device Manager.

  5. open the Device Manager and click the menu drop-down of the network adapter driver.

  6 right-click on the driver and uninstall it.

  7. now restart the system and again to go to the Device Manager after steps 1-2 and after doing a right click on the driver click on update driver.

  Method 3:

  Here are the links that you can use-

  8. how to connect to a wireless network in Windows Vista?

  http://support.Microsoft.com/kb/928429/en-us

  9 connectivity fails when you try to use Windows Vista behind a firewall device

  http://support.Microsoft.com/kb/934430

  10 Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  http://support.Microsoft.com/kb/928233

  11. how to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Thank you

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.