Help on the manipulation of data

Similar Questions

• Help on the passage of data between vi when built in exe

  Hello

  I have this problem and grateful if someone can give me a heads up the right direction.

  I'm trying to write a program for acquisition of data and control of two instruments simultaneously.

  An instruments is a rotating stage that I control the movement and data read using activex controls. I do this in a vi that I have two distinct time of lines, one for updating the Rotary floor continuous data and other while loop for the handles of event structure.

  The second instrument is a detector that follows the rotation of scene. For this, I have an another vi with two loops for example, for data acquisition hollow rs232 and another while the loop is to the structure of the event.

  I use globals to pass data between the vi and it works very well in a labview project environment. However when I Isaiah to compile these exe files. I can no longer spend data.

  Is there a programming method when you communicate with more than one instrument. What I want to ask is, say I have a function, oscilloscope etc engine generator How can I control them in windows separated (for example, separate programs) and pass data to the other?

  I would be grateful for any help.

  Hello

  Global variables are not accessible to separate executables because their areas of memory are not shared. This can be found in the following document: If I can use a Global Variable to share data between two executable LabVIEW? The only way to have it working would be to use a main VI that launches your two separate applications like subVIs. This would allow you to share a global variable between the two. Your other option would be to use the method described in the article, or to use shared Variables: How to communicate between several executable LabVIEW using shared Variables?

  -Zach

• Help in the merging of data and create mailing labels

  I have a CSV file with three field ("name, envelope" "" = address"and"City ST Zip") and 245 records.

  I have the labels that correspond to seven on a page.

  I have the designed document. I am able to get the fields inserted, but... when I merge, I get the first page with seven the first record labels, the second page with seven second record labels, page 3 with seven third record labels. You get the photos. I want seven different addresses on each page. So... instead of having more to 35 245 pages.

  Is this possible or should I find a way to make my drawing in Word? * sigh *.

  Everyone made the same mistake; you set seven (records) to your InDesign document, are not.

  Create the first instance (upper-left)

  Go to control panel to merge the data and choose multiple records per page.

  It helps to have put guidelines in place for the Visual presentation and I try to keep the total area of my equal fields the number of hole - exactly 2 inches of width, for example.

  Data merge multiple records per page will need the values for spacing from room to room. Integers and guides make easier.

• Help with the problem of data type...

  Hi friends,
  
  I have a requirement. I have a warrant 2 guests (from and to). The data contained in the guests are like "Fall 2006", "spring 2006", "full of 2006", "Academic 2006"for a given year. " I have data from the year 2000 to 2008. The data type of the column duration in varchar. I have a report corresponding to this prompt. This report works well if it is not linked with the guests. If I have this tie with guests, its giving me results because in the report I gave filter as term is greater than or equal to ' fisrt_pv "(où first_pv est la variable de présentation j'ai utilisé pour mon d'invite de terme... comme second_pv sage est pour à terme rapide) and the term is less than or equal to"second_pv"."» So, if I put my guest (and) fall 2007 and (spring 2008 to) and run the report, its sends a fall 2007, Full 2000... Full2008, spring 2000... Spring 2008. It is because it is comparing the term based on letter of departure with all the other term. We know that the fall 2007 and spring 2008 are next to next semesters, is expected to see just a 2-column output. How do oracle know that?
  
  I have a term_number associated with this table numbered 1 to the spring of 2000, 2 Full, 3 for autumn 2000 2000, 4 for academic 2000... all the way up to academic 2008. I used this area to the command prompt to order because I want the guest to show as the spring of 2000, Full 2000, fall 2000 etc. instead of 2000 academic, University 2001... hope this field will be useful for you to analyze... I need your help to do this... If you need other info let me know... Thanks for your time n help...
  
  Kind regards...

  Yes. The problem is that your guests are CHAR, so the calculation "superior to" is done alphabetically rather than numerically. This digital keys.

  Create two columns to contain the term_number that match the values selected in your guests. Then the BETWEEN operator do not filter on numeric values. You can still view the CHAR values in your report, but now they will be in the range that you would expect.

• Need help with the MapPoint 60-day trial versiio

  I installed the free trial 60 days of MapPoint and need the following help.

  I was able to create a map from an Excel spreadsheet and now map shows the 61 locations as landmarks. How can I change the Pushpins to look more like a data label. I want that every location mapped to display the name of place. The name of the place is a column in my spreadsheet. I already went through the help on the labels of data and pushpints, but I don't know what to do.

  It would be great if someone could call me.

  Thank you

  Vickie Johnson |

  Program Manager, q.. |

  MapPoint forum seems to be:

  http://social.Microsoft.com/forums/en-us/streetsandtrips/threads

  Please ask your question there. The site of answers doesn't have a forum for MapPoint.

• Creating auto-generated pages of the order of the day with dates

  Want an easy way to create pages of 12 months of a value with a provision of model grid generated in Illustrator at the end.  This development has seven different days (different available calendar highlight each day of the week amongs other things) can someone tell me how to generate these 365 pages without having to individually create all these pages and gather the?  I have no idea of software wich or function would be better to create this type of document.

  Thank you

  There are two ways to link your list that you make in Excel to the identity document. One is to export the text list and place (it's a bit complex when you have so many masters) and the other is to use the data merge.

  If you want to place the text, starting with a master page that has a frame on each side of the spread (for pages face to face) to contain the dates and add any other information that will appear on all pages in the order of the day. Make sure that the images for the dates are threaded from left to right, and then click inside the image on the left with the text tool. Apply a paragraph style that includes 'Start in the next section' in the framework Options keep in the style definition. Master pages of basis for seven days on this master. Befor put you the date implementation of 365 pages list to apply the correct masters, then place the date list by holding the SHIFT key and clicking inside the frame of date on page 1.

  To use the data merge you need to add a line to the top of the list and put a name in what will become the label of the field, then export the tab delimited text (because I assume you have commas, but without tab in your arrival dates).  I make a master with only the date box and nothing else included (or start with no master) and do a one record per page, then AFTER the merger merger, apply the will find it with the other information on the correct pages. The framework of date box should not appear on other masters. Help on the fusion of data files are very good, but do not hesitate to come after read you them if you have any other questions.

• Touch iPhone 5s does not not needing help for the data on it.

  iPhone 5 s (iOS 9) I have blue and red lines on the screen and the touch does not work at all, but the phone still works as usual outside the lines and contactless (voice on don't work/Siri as other items said worked, I do not have wifi for Siri). What I want is the data on the phone, I have a macbook pro (OS X 10.11) a fix would be better, but all I need is the data. I have icloud activated, but it was defective on my phone so don't know if I had a full backup and would like to know how to check. I have a form of computer backup about 2 months ago, but wanted all the pictures and data since then.

  At the back for up to my pc, I need is to unlock my phone, so any help will be appreciated.

  Thank you

  If connect to iTunes and perform a full backup

  And also connect on iCloud & see you backup recently

• ETA App should help to get the time and date feature HELP!

  Hi everyone, I'm doing an application where I need to get the time and date of the antone device can help, I know there is a function such as getDate or getTime but im not to know how to use it.

  As far as I know,

  I use this to get the time system (it returns long type)

  System.currentTimeMillis();
  

  After that, you can use SimpleDateFormat to convert date and time

  SimpleDateFormat sdf = new SimpleDateFormat("dd.MM.yyyy, HH:mm");
  String time = sdf.format(new Date(System.currentTimeMilis()));
  

• Urgent! Help the fusion of data to a document in Indesign CS6

  I tried to merge a CSV file (converted from Excel) through the option of data merge. The total of the columns in the CSV files for the field names are 43, however only 15 field names appear after the command merge data. Is there a limit to the names? How can I extend it? Plugin "data" help?

  I got your file and I found the problem. Two of your header cells have newlines in them (column N and U)...

• HELP required on forming the matrix of data using PL/SQL

  Hi all
  
  I'm new on this thread and need your help in this regard.
  
  I have a requirement for the construction of a matrix of 5000 X 5000 using PL/SQL. My original data tables have 5000 lines each and I need to make a correlation analysis using these data and need to store in a physical table, and not in memory. This feat feasible the simple use of PL/SQL? I understand that Oracle DB has a limit of 1000 columns (but not sure) and so I would like to know if there is a workaround for this kind of scenario. If not, what are the other alternative methods to achieve this feat? Do I need to use any 3rd party tools to do this? A quick response from experts is highly appreciated.
  
  Thanking you in advance all the gurus.
  
  Rgds
  
  SAI

  1006089 wrote:

  I have a requirement for the construction of a matrix of 5000 X 5000 using PL/SQL.

  Possible. But this will require a large part of the memory. As PL/SQL is a language server side, this means the server's memory. That means server potential resource problems.

  And that the server environment is a multiprocessu multi-user environment, it also means potentially several copies of this code of matrix running multiple processes, each putting a request very heavy on the resources of the server. Is no longer a matter of potential server resources, but a guarantee... (exactly the same problem if you use app server architecture and Java or .net)

  You have to ask what is the cracking of data, server-side language? The answer is SQL. No PL/SQL. SQL runs rings around PL/SQL, Java, C/C++ and other languages when it comes to complex, fast and scalable, processing of large volumes of data.

  So you ask yourself why use PL/SQL? With his expensive server memory footprint? SQL and not SQL tables that are designed to deal with massive data effectively and efficiently?

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• Please help understand the mappings between PS & tables tables of data warehouse

  Hello
  We have OBIEE 11 g with OLIVIER 7.9.6.3 (HR Analytics) installation with Informatica PowerCenter SE 9.01 HF2. We use PeopleSoft HRMS 9.1 system source.
  Can you please help me how to understand the flow of data from end to end (or data model with relationship) between the PeopleSoft Tables and tables of data warehouse? Y at - it none available who liaises between the PeopleSoft HRMS tables and tables of data warehouse?
  
  PS We are new to Informatica workflow maps to find it very difficult to understand each mapping for each table.

  You can use the guide to table HR analytics on metalink. Here's the note:

  HR Analytics, Oracle Business Intelligence - Source tables uses [ID 1328607.1]

  This will show you the use of the main table. If you need the full line, you can use the data lineage Guide.

  If it helps, please mark as correct.

• Need help for managed bean - to the values of the extraction of data loading of jsf is

  Hello
  in the construction of managed bean, I wrote code to extract values from database.
  
  but for each action (such as button clicks, drop-down list changes etc...) this constructor is called I don't want.
  
  I tried to over come this using beforePhase event of the jsf. but sometimes it doesn't property.
  
  Someone please help me to retrieve the values of data base loading of jsf is.
  
  Thank you
  Veera

  Veera
  If you want to execute a method in a method beforePhase only once (when loading the page) then you can check the expression #{adfFacesContext.initialRender} before running all you want.

  import javax.el.ELContext;
  import javax.el.ExpressionFactory;
  import javax.el.ValueExpression;
  import javax.faces.application.Application;
  import javax.faces.context.FacesContext;
  import javax.faces.event.PhaseEvent;
  
  public class Test {
  
      public boolean isInitialrender() {
          FacesContext fctx = FacesContext.getCurrentInstance();
          Application application = fctx.getApplication();
          ExpressionFactory expressionFactory =
              application.getExpressionFactory();
          ELContext context = fctx.getELContext();
          ValueExpression createValueExpression =
              expressionFactory.createValueExpression(context,
                                                      "#{adfFacesContext.initialRender}",
                                                      Object.class);
          Boolean isInitialrender =
              (Boolean)createValueExpression.getValue(context);
          return isInitialrender;
  
      }
  
      public void beforePhaseMethod(PhaseEvent phaseEvent) {
          // Add event code here...
          if (isInitialrender()) {
              System.out.println("This statement is shown once... when the page is loaded");
          }
      }
  }
  

• Need help with the date of Validation Urgent

  Hello

  We need help in the Validation Date.

  We have 2 fields of Date on the form the Start Date, End Date

  The requirement is: End Date (cannot be more than 30 years as of the start date).

  I wrote after the script on the exit eventof the End Date . But the problem is its calculation of 30 years from the current Date not from the Start Date

  var

  tDate = util.scand (' mm/dd/yyyy', new Date());

  var

  M = tDate.getMonth ();

  var

  D = tDate.getDate ();

  var

  Y = tDate.getFullYear ();

  var

  SRes = util.printd("yyyy-mm-dd", new Date((Y+30), M,D) );

  App.Alert (SRes)

  If

  (SRes < = this.rawValue)

  {

  App.Alert ("cannot be greater than 30 years from the start date")

  () xfa.host.setFocus

  ce );

  }

  can someone help me please

  Kind regards

  Jay

  Hello

  You need to get the LCD field javascript and calculate & compare with the future date in date javascript.

  Try the following script.

  var sDate = StartDate.rawValue;
  var wkStartDate = util.scand ("yyyy-mm-dd", sDate);

  nYear var = wkStartDate.getFullYear ();
  nMonth var = wkStartDate.getMonth ();
  nJour var = wkStartDate.getDate ();

  var wkFutureDate = new Date (+ 30 nYear, nMonth, nJour);

  sDate = EndDate.rawValue;
  var wkEndDate = util.scand ("yyyy-mm-dd", sDate);

  If (wkEndDate.getTime () > wkFutureDate.getTime ()) {}
  xfa.host.messageBox ("cannot be more than 30 years from the start date");
  xfa.host.setFocus (this);
  }

• Need help get data with the most recent date of entry into

  Hey guys;
  
  I need help with fine tuning a query to get the one with the most recent implementation.
  
  Here's my current query:
  
  /**********************************************
  Select sge.seal_group_id,
  SGE.equipment_id,
  SGE.effective_date
  of seal_group_equipment EMS.
  seal_group sg
  where equipment_id = 48801
  AND EMS. SEAL_GROUP_ID = SG. SEAL_GROUP_ID
  and sge.end_date is null
  Group of sge.equipment_id, sge.seal_group_id, sge.effective_date
  After having sge.effective_date = max (sge.effective_date)
  
  ******************************************************/
  
  Which produces the following results:
  SEAL_GROUP_ID - EQUIPMENT_ID - EFFECTIVE_DATE
  25-48801 - 01/01/1993-00: 00:00
  11730-48801 - 22/08/2003 08:42:11
  
  
  What I really need, is to show only the line with the most recent date of entry into
  I hope someone can help
  Thank you

  MAX will not work because the SEAL_GROUP_ID could depart. I would say analytical:

  select seal_group_id,
  equipment_id,
  effective_date
  from (
  select sge.seal_group_id,
  sge.equipment_id,
  sge.effective_date,
  RANK() over (partition by equipment_id order by effective_date desc) r
  from seal_group_equipment sge,
  seal_group sg
  where equipment_id = 48801
  AND SGE.SEAL_GROUP_ID = SG.SEAL_GROUP_ID
  and sge.end_date is null)
  where r = 1;
  

  Keep in mind if two records have the same effective_date, they would both appear.

  Note: query above has not been tested, since there is no script provided.