Help, please! Configuration of ESXi to get Cisco Surv. Multimedia for work software.
Quick overview of what I do:
I am running VMWare ESXi on a Dell Poweredge R710 server. My virtual machine is Linux SuSE 10, Service Pack 1, the recommended Cisco media platform video software Surveuillance. . I try to get my Cisco software to run on the computer, but it requires an IP address from a remote location to access the software. My IP address that I attributed to VMware is assigned, but when I use the same address and have the x.x.x.x/cisco.vsm.html there is a conflict with the original address assigned to the address that is using VMware to access the server itself. I'm a newbie and it's all very confusing to me, so I apprecaite little help.
Is this a problem IP routing or a problem of port assignment? The Cisco software is supposed to load when I type http:/x.x.x.x/vsms.html in a browser window on the same network.
Any suggestions? I did research this for days trying to figure out how to get a simple program to work.
Thanks a lot for your help!
Try the URL localhost directly on SuSE http://127.0.0.1/vsmc.html machine if that gets refused then you have configuration problems in the software.
Tags: VMware
Similar Questions
-
Help, please... I need Windows XP driver for my CQ40-121TU
Help, please... I need Windows XP driver for my CQ40-121TU
Please send me a full links to the driver for CQ40-121TU thank you very much...
Your computer came with XP? If your computer came with VISTA and was never made for XP, so no XP drivers will be available for the system. I looked at the HP site and could not find XP drivers, which probably means that it is a model of Vista, not XP. If it came with XP then call HP and they will be able to send you a XP disc for a small fee, like $15 or more.
-
Help please - configuration VPN AnyConnect crossed
Hi there, forgive me if I missed all the protocols forum because this is my first post.
I am trying to configure an AnyConnect VPN and I think it's nearly there, but not enough yet. When I connect from an outside network, it gives me the following error '... No address is available for an SVC connection. I checked the pools of addresses and what I see, they are assigned to the profile. I'm doing it also crossed, I all VPN traffic through this router... traffic LAN and remote Internet sometimes when I'm on the unfamiliar wifi hotspots. I tried to get this to work for more than 1 week with a lot of different forums to scouring. I have included my config running for anyone to help me with. I appreciate a lot of the answers to get me on the right track. Thank you.
Update 15 minutes later: I posted my SSLVPN IP pool to the DefaultWebVPNGroup and it connected but I was unable to browse the web or ping network resources. I would like to disable the "DefaultWebVPNGroup" without any consequences for the installation program. What I still have to disable?
-------------------------------------------------------------------------------
Output from the command: 'show running-config '.
: Saved
:
ASA Version 8.4 (2)
!
ciscoasa hostname
activate 8Ry2YjIyt7RRXU24 encrypted password
2KFQnbNIdI.2KYOU encrypted passwd
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
192.168.123.1 IP address 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address dhcp setroute
!
boot system Disk0: / asa842 - k8.bin
passive FTP mode
DNS lookup field inside
DNS domain-lookup outside
DNS server-group DefaultDNS
Server name 208.67.220.220
name-server 208.67.222.222
permit same-security-traffic intra-interface
network obj_any object
subnet 0.0.0.0 0.0.0.0
object-group service DM_INLINE_SERVICE_1
the purpose of the ip service
the purpose of the tcp destination eq https service
the purpose of the tcp destination eq pptp service
the purpose of the service tcp destination eq www
object-group service DM_INLINE_SERVICE_2
the purpose of the ip service
the purpose of the tcp destination eq https service
the purpose of the tcp destination eq pptp service
outside_access_in list extended access allowed object-group DM_INLINE_SERVICE_1 all 192.168.123.0 255.255.255.0
inside_access_in list extended access allow the object-group 192.168.123.0 DM_INLINE_SERVICE_2 255.255.255.0 any
allow a standard ACL1 access list
ACL1 list standard access allowed 192.168.123.0 255.255.255.0
access-list nat0 extended 192.168.123.0 allowed any ip 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Within 1500 MTU
Outside 1500 MTU
mask 192.168.132.50 - 192.168.132.60 255.255.255.0 IP local pool SSLVPNpool
ICMP unreachable rate-limit 1 burst-size 1
ASDM image disk0: / asdm - 645.bin
don't allow no asdm history
ARP timeout 14400
NAT (exterior, Interior) source Dynamics one interface
NAT (inside, outside) source Dynamics one interface
inside_access_in access to the interface inside group
Access-group outside_access_in in interface outside
Route outside 0.0.0.0 0.0.0.0 76.x.x.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
Enable http server
http 192.168.1.0 255.255.255.0 inside
http 192.168.123.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set ikev1 ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set ikev1 SHA-ESP-3DES esp-3des esp-sha-hmac
Crypto ipsec transform-set ikev1 esp ESP-DES-MD5-esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ikev1 ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ikev1 ESP-AES-128-MD5-esp - aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 define ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
IKEv1 crypto policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
IKEv1 crypto policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
interface ID client DHCP-client to the outside
dhcpd dns 208.67.220.220 208.67.222.222
dhcpd outside auto_config
!
dhcpd address 192.168.123.150 - 192.168.123.181 inside
dhcpd allow inside
!
a basic threat threat detection
host of statistical threat detection
statistical threat detection port
Statistical threat detection Protocol
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
allow inside
allow outside
AnyConnect image disk0:/anyconnect-win-2.5.3054-k9.pkg 1
AnyConnect image disk0:/anyconnect-macosx-i386-2.5.3054-k9.pkg 2
AnyConnect enable
internal group SSLVPN strategy
SSLVPN group policy attributes
client ssl-VPN-tunnel-Protocol
Split-tunnel-policy tunnelall
by default no
the address value SSLVPNpool pools
WebVPN
AnyConnect Dungeon-Installer installed
time to generate a new key 30 AnyConnect ssl
AnyConnect ssl generate a new method ssl key
AnyConnect ask flawless anyconnect
attributes of Group Policy DfltGrpPolicy
value of server DNS 208.67.220.220 208.67.222.222
client ssl-VPN-tunnel-Protocol
username Vxxxxx ZyAw6vc2r45CIuoa encrypted password
username Vxxxxx attributes
VPN-group-policy SSLVPN
client ssl-VPN-tunnel-Protocol
admin password 61Ltj5qI0f4Xy3Xwe26sgA user name is nt encrypted privilege 15
username Sxxxxx qvauk1QVzYCihs3c encrypted password privilege 15
Sxxxxx attributes username
VPN-group-policy SSLVPN
client ssl-VPN-tunnel-Protocol
tunnel-group SSLVPN type remote access
tunnel-group SSLVPN General attributes
address (inside) SSLVPNpool pool
address pool SSLVPNpool
Group Policy - by default-SSLVPN
tunnel-group SSLVPN webvpn-attributes
allow group-alias SSLVPN_users
!
!
!
World-Policy policy-map
class class by default
Statistical accounting of user
!
service-policy-international policy global
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:989735d558c9b1f3a3a8d7cca928c046
: end
----------------------------------------------------------------------------------------------------
Thanks again to all.
To access the internal resources of VPN, here's what needs to be configured for NAT:
obj-SSL-pool of network objects
192.168.132.0 subnet 255.255.255.0
object obj-Interior-LAN network
192.168.123.0 subnet 255.255.255.0
Static NAT obj-Interior-LAN obj-Interior-LAN destination source (indoor, outdoor) obj-SSL-pool static obj-SSL-pool
I also advise you to remove the following statement of the NAT:
NAT (exterior, Interior) source Dynamics one interface
If you want all traffic internet VPN to be routed to the tunnel, then here's the NAT config:
object obj-SSL-internet network
192.168.132.0 subnet 255.255.255.0
dynamic NAT interface (outdoors, outdoor)
And finally, you cannot disable the group policy by default 'DefaultWebVPNGroup '. So that when you log-in, you chose
SSLVPN_users group of tunnel, which will apply SSLVPN automatically group policy that you have configured explicitly that.
I hope this helps.
-
Help please! Im trying to get my menu widget work
Hello im trying to get my menu widget work. It is a required simple page for www.allgen.co.uk. the site is the only House of two pages and contact us. I added the widget to the main master page, and then I downloaded by ftp on my server. the menu does not work on the website or on the preview or if you preview site in the browser.
If you preview page (master page) then it does work but not you get an overview of the home page or the contact us page?
I would really appreciate the help
Just checked what happens if the menu was in the footer box and he works there, but I'm not there
Post edited by: Gavalar
Hello
The Image that you used in the homepage is overlaid with menu so menu gets behind the frame and becomes idle.
Please check the content of the page if they overlap with menu such as menu goes behind the frame.
Thank you
Sanjit
-
Help please! until the computer gets:)
sarakirkpatrick.co.UK
This is a link to my Web page. I can't get the images of "unbreak" nor can I get the pages to link reliable... everything seems to happen in dreamweaver, but obviously isn't.
Can someone give me some ideas? I go around and in circles until I want to through the computer out the window like nothing I do improves things...
Apple please make a computer on which I can converse with!Hi Sara:
Review the instructions in your hosting on the appropriate folder your
files in the site belong to.What is your domain name?
As now, coded
your pages are waiting for your pictures in the folder root of your host
field, rather than your domain name.
News:f2bvd4$o0k$1@forums. Macromedia.com...
> http://www.users.madasafish.com/~sarakirkpatrick/index.html
>
> This is a link to my Web page. I can't get the images "unbreak" nor can
> I
> get the pages to link reliable... everything seems to be
> well in
> dreamweaver but obviously isn't.
>
> Can give me some ideas? I go around and
> circles
> until I want through the computer out the window as I'm just
> making
> improves things...
>
> Apple please make a computer on which I can converse with!
> -
Help, please. How can I get rid of this red dashed border around my navigation bar images?
If you go to my site here...
http://metalwolf92.zymichost.com/
Left click and hold your mouse, and don't release on one of the images of navigation buttons. Notice the red dotted border? How can I get rid of these?
All images have already border set to 0.
Add this to your css:
a:active { outline: none;}-- E. Michael Brandt www.divahtml.comwww.divahtml.com/products/scripts_dreamweaver_extensions.phpStandards-compliant scripts and Dreamweaver Extensions www.valleywebdesigns.com/vwd_Vdw.aspJustSo PictureWindowJustSo PhotoAlbum, et alia --
-
one thing popped up the other day, while using the internet saying: I had a virus and to move to the vault, and now I can't access anything that either don't even m SRDyLa or the music I do it doesn't let me do anything...
Hello
- What happens when you try to access anything on the computer?
- You receive an error message?
You can view these methods:Method 1:I suggest you run this tool and check.What is Windows Defender Beta Offline?Method 2:You can also try to create a new user account and check. If it works in a new user account, then probably your user account have been damaged and would need a fix.Create a user profile.
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-accountNow search for the question.Follow the link provided below to fix the damaged user profile.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile -
BlackBerry smartphones can not get my yahoo email for work
Hello
After the death of the battery from my Blackberry 9360, I just bought a new 9720 two days ago in Dubai, thinking that I can just put the same SIM card (from the 9360) of my Swisscom Mobile operator in the new 9720, and I can just continue to receive emails from my yahoo email account. But it does not work.
Apres_que I set up the yahoo email account under the function of setting on the new 9720, the account is listed with Yahoo symbol in the e-mail... accounts where you can then choose "add another email address" or "back to the setup"). But the 'E-mail accounts' icon (in the Setup, where it lists the different features you can configure outside e-mail accounts) doesn't idicate (with one (1) next to him), who has an e-mail account has already been set up. When I try to compose an e-mail, I get the message "no message services configured. You will be redirected to the Setup Assistant to configure your e-mail account "."
If I click on ok to continue in this direction, it brings me to the email accounts screen that shows the already created Yahoo e-mail account. If I try to recreate the yahoo account, I get the message that "this account has already been added to your BlackBerry Internet Service". But obviously my yahoo email account does not work because I can't write or receive messages.
According to your post KB05000, I remove my email yahoo [CMIME] account in the service book, but I noticed there is a second book of service of Internet Service to my yahoo email account that ends with [CICAL]. I wonder if this has nothing to do with it and that I should remove this as well?
Thanks in advance.
Jens
CMIME is messaging (email) and CICAL is calendar.
Yahoo! has had some problems in recent months. It might actually be a problem with them and nothing to do with BB. I can't say for sure, however.
-
1 adobe CC - complete set - individuals
Without doubt, this has been asked before and I ask again to highlight the problems of usability with this page-
https://creative.adobe.com/plans Which applications are delivered with full CC?
As I understand it.
(1) persons > photography = you get Photoshop + more (besides the link explains the rest)... great
(2) individuals > unique App = you choose any application and pay $$$ for this App (makes sense)
(3) individuals > Complete = I assumed that you have access to all applications including (PS, Illustrator, ID, Acrobat, Muse, DW, Flash, Premiere Pro, after affects, hearing in copy)?
Can anyone confirm? Can someone from adobe please update the site for clarity.
--------------------------------------------------------------------------------
2 price
And for the record, 35 middle level pro web developer / designer (individual) 3d, the price is not acceptable for me personally.
It should be more like
1 app = £8 per month
2 apps = £16 MP
3 applications = £18 pm
All Apps = £24 pm (I'd be happy to pay this month)
And get rid of this garbage of annual reduction. I want a monthly remuneration without contract of the year. I can go months between jobs where I shouldn't have some applications.
I find it also difficult to justify the expense of £600 a year when I only need to use 2 or 3 applications several times a month.
(This opinion is shared by other software engineers and web developers I know).
I want to use Photoshop, Illustrator, first and After effects and contribute to their development financially, I don't really have. But the price is still too high at the present time for other applications I think Psalm system works well for users who are focused and unique streams over say Illustrator or After effects, but to pay £45 per month for a year to use occasionally additional apps is not acceptable. I do not use your applications and look for alternatives.
I use these alternatives currently but could do with access to the adobe software a few times a month and months of the year if the plans were more accessible.
Photoshop - Gimp (join to Photoshop all the months soon)
Illustrator - Esquisse3
First - Openshot
After effects - no
Thank you
All Cloud Applications: http://www.adobe.com/creativecloud/catalog/desktop.html
-
Can't get ProperySpec.all == true for work.
If I use the ProperySpec and set a 'whole' attribute to true I get not all properties return when you use the ReteriveProperties method. On the other hand, if I set it to false and you ask something specific, it works. I don't understand why this is the case. I would appeaciate any help that I can not see what is the problem.
A code example follows. c.obj is a refrence to a virtual machine that is already found:
If (c.obj.type is 'VirtualMachine')
{
PropertySpec all_props = new PropertySpec();
all_props.type = 'VirtualMachine ';
all_props. All = true; Returning nothing when set to true and no error is returned.
all_props.pathSet = new string [1] {"config"}; Looking for a specific property works.
PropertyFilterSpec filter_spec = new PropertyFilterSpec();
ObjectSpec ospec = new ObjectSpec();
ospec.obj = c.obj;
filter_spec. ObjectSet = new ObjectSpec [] ;
filter_spec. Propset = new PropertySpec [] ;
Try [ObjectContent = mService.RetrieveProperties (mServiceContent.propertyCollector,
new PropertyFilterSpec [] );
Info VirtualMachineConfigInfo = (VirtualMachineConfigInfo) tent [0];
Console.WriteLine ("VM UUID = ", info.uuid);
}
Hello
C# requires certain properties to specify corresponding to the "specified". So, in your case, you will need to add the following line:
all_props.type = 'VirtualMachine ';
all_props. All = true;
all_props.allSpecified = true;
This will return all the properties of the managed entity. Hope this fixes your problems.
Neha
-
How can I get windows live mail for work online
My windows Live Mail is showing "work offline".
When I get the dialog box "do you want to go online? I press 'Yes', but the same dialog just come back again.Now I have Windows Live Mail works again. I did download an apparently new version of http://windows.microsoft.com/en-GB/windows-live/essentials-other-programs here
I downloaded just the 'Mail' app specifically, didn't want the other stuff.
Loading to the top it's now called "Windows Live Mail 2012" but everything looks the same, and she kept all my settings intact inboxes, etc.. Happy days.
-
Help, please.
trying to get my windows media player works it stopes working it says Media Player fitted cap and it is said that com is missing
I have no idea of what to do combat it if all that can help I would appreciate it so much I am so lost and don't know was to begin.
Hello
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-------------------------------------------------------
After the above, which could correct the problem and should be considered as pprerequisites:
Solve problems in Windows Media Player
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-in-Windows-Media-PlayerSupport for technical problems of Windows Media Player
http://support.Microsoft.com/ph/7763#TAB0I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
My PC is infected with Vista Antivirus 2012. He keeps me get on the internet, so I can't use malwarebytes or antispywaredoctor because I can't go on the web, even in safe mode. Any help, please. How can I get rid of it when I can't get on the web?
Try using the Standalone System Sweeper http://connect.microsoft.com/systemsweeper
You download it on another computer and copy on a DVD drive or USB key. You can then do a scan without starting Windows.
There is a list of CD received by other vendors antivirus here:
http://www.TechRepublic.com/blog/security/rescue-CDs-tips-for-fighting-malware/3803
-
my monitor 17 "is smaller than all my pages. The TPO and low headers are not visible. Once I put the pointer over the edge of the image, and then down the toolbar. Help, please. Also. I get that thin lettering and drop thick as you can see. As if they were a beat on the page re: the ink.
Hi the Minister m annettegraham fast,
What version of Windows you have installed? Follow the steps in this document to set the resolution of the screen.
Let is know if this helps.
-
Help, please. Power Diskearly module on a failed after recovery
Hello community. Help, please. I had to get a vmware workstation from a backup after a hard disk failure. There is no lock file in the folder. I get the following error
The virtual disk parent has changed since the child was created. The content of the virtual disk ID parent does not match the ID of parent for children's content
Cannot open disk ' C:\Users\Adrian\Documents\Virtual Machines\Work Image\Work Image-cl1 - 000006.vmdk' or one of the snapshot disks it depends on.
Power DiskEarly module has failed.
Unable to start the virtual machine.
See attached photo of files in the directory and VMX
Help, please
I don't know what is the cause. If you have enough disk space, you can try to create a clone of the virtual disk whose snapshots and attach this virtual disk to either a new virtual machine or the current virtual computer. Note: The vmware - vdiskmanager.exe is located in the installation of the workstation directory.
VMware - vdiskmanager.exe - r "work Image-cl1 - 000005.vmdk" t 0 "work - Image.vmdk.
André
Maybe you are looking for
-
HP 15-r029wm Notebook PC: keyboard laptop HP 15-r029wm player
Need help finding the driver for HP 15-r029wm Notebook PC keyboard. Thanks for any help.
-
Unable to connect to the printer - HP photosmart premium c 410
Macbook air OS x 10.9.5 using Printer and macbook show good wifi signal. Did the disconnect/reconnect the two devices and the comcast router. Check the "share printer on the network", on and outside. The printer works sometimes and at random. Exampl
-
Satellite A100-290: new BIOS allows support Core2Duo?
Hello I found a new bios for my A100 - 290 (PSAA8E) published 07/25/06.I can't find any description for the new bios and what features added werde. The new bios allows support Core2Duo? THX, best regards,. Sebastian
-
The audio service is not running
Today, I turned on my laptop to discover that the sound did not work. I tried updating the drivers, restart the computer and try the default of repair tool, but nothing has worked so far. Any ideas? I have Lenovo Z50 Thank you
-
HP Envy 17-j053ea: compatibility Dual Band Wireless - 7260 on HP Envy 17-j053ea AC
Just a quick question, before I update my default card WIFI if an Intel Dual Band Wireless-AC 7260 - network will work in my Envy 17 - j053? Thank you very much, Lee... I think I have it starting at: http://www.Amazon.co.UK/Intel-7260-HMWWBR-wireless