Help, please! Device drivers system & basic coprocessor are missing after Win7 upgrade

Similar Questions

• Fonts I have installed in the font book are missing after the upgrade 10.11.6

  I ran the upgrade recommended this morning at El Capitan 10.11.6 on my end 2011 MacBook Pro. A certain font was not available when I opened an Illustrator document, so I opened the font book to see why and found that hundreds of fonts, I entered the book of policies over the past year or more are missing. I know that real fonts are still in my police records, but a number of hours of work participated in their addition to the font book and organize them into folders. Is all the work is lost, where can I access the preferences that contain this information somehow? What a brake if not. Font book does not yet have all folders that I put in place, they are just empty and only the core system fonts are loaded.

  Unless I can access the old prefs I guess I also install all my software again, to make sure that necessary fonts are loaded?

  Help!

  John

  cjohna wrote:

  I ran the upgrade recommended this morning at El Capitan 10.11.6 on my end 2011 MacBook Pro. A certain font was not available when I opened an Illustrator document, so I opened the font book to see why and found that hundreds of fonts, I entered the book of policies over the past year or more are missing. I know that real fonts are still in my police records, but a number of hours of work participated in their addition to the font book and organize them into folders. Is all the work is lost, where can I access the preferences that contain this information somehow? What a brake if not. Font book does not yet have all folders that I put in place, they are just empty and only the core system fonts are loaded.

  Unless I can access the old prefs I guess I also install all my software again, to make sure that necessary fonts are loaded?

  Help!

  John

  Use your backup Time machine restore.

  Your book plist police is located on via Finder > go > go to folder, copy and paste:

  ~/Library/preferences/com. Apple.FontBook.plist

• My executable Application are missing after the upgrade to Windows 8?

  I've upgraded to Windows Vista Premium 8 and now my executable files of the application are missing? Can anyone tell where they went?

  To install Windows 8 Windows Vista or Windows XP, you must perform a new installation. This means that you will not be able to keep the settings, all files or programs when you upgrade.

  You need to reinstall your executables.

• System restore points are missing after you use century link

  Original title: cannot use the system restore

  I went with the century PC health check link. It has not increased my speed, and now I've lost all my saved as points previously watched ebay items and my drop-down web sites have already disappeared. My system restore has also disappeared. How to I reverse what has been done to make it like it was? Jim in Idaho

  I don't know what the link or Web site that you went to check. But I suggest you run the full scan of the system with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  If it is Malware infection it could detect and return things to normal.

• Error message saying signature not valid fatal error, System log files are missing or damaged 426 error when I try to install Windows XP.

  I get an error message that I need help to solve

  I need help making past error fatal error of invalid signature, the system log files are missing or damaged 426 error when I try to install windows xp pro on the new hard drive I upgraded too.  He was the original operating sysytem who accompanies him.  I use an installation cd from microsoft windows xp with service pack 3.  Whenever I get the same message and it wasn't to restart with the cd and it install all over again, can you help me please?

  Well, you need to format the hd before xp can be loaded onto a new drive...

  If it's a microsoft retail xp cd, installation cd, boot the pc on a cd, to the xp cd menu, select install xp,.

  Okay, choose the option to format before xp begins to install, the rest is automatic. In addition, do

  of course, the old hd is unplugged, plug once xp installed, disconnect printers, etc...

• I just clicked on the shortcut to undo key and then all photos are missing after I get my CF card

  How to get my photo because I just clicked on the shortcut to undo key and then all photos are missing after I get out my card CF.
  I formatted my CF card already.

  < re-titled by host >

  If you clicked the Cancel button right after the import, then you u did import. If the REFO option is available, click on it.

  In otherwise, re - import photos from the card again and do not click Cancel. If the card has been erased, see if you can use the Time Machine backup to restore.

• It is not possible to restore the system, the dates are missing

  Original title: I can't run a system restore

  When I pull up the system restore file, I click on "restore my system to an earlier time" box is empty, what happened, this all started after I downloaded the latest version (I think) of Internet Explorer. Advice please?

  Hi Copecowboy,

  I suggest to go through the steps from the link provided and check if it helps.

  System Restore "restore points" are missing or deleted

  http://support.Microsoft.com/kb/301224

  We can also refer to certain steps in troubleshooting tip from the link provided and check.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/301224

  Hope this helps and keep us posted.

• System/drawer/bar task icons are missing after each reboot

  Original title: why every time that I reboot, or start my computer some of my system/drawer/bar task icons are missing.

  Whenever I have to resart my computer there are always one or two icons always absent from the State system, as a time bar IDM is missing and a time MSE icon missing etc, I scan my computer with AVG, Avira and Avast, no viruses not found so far. SO why this continue to happen, is this Windows Bug or what? This never happened to me in Windows XP, the "Notification area icons" settings are fine, nothing wrong with them. Please help me solve this problem...
  Now the Drivermax icon is missing, but I put it to start at the start....
  

  Hi Furqan,

  Thanks for posting your query in Microsoft Community Forum.

  The issue may have been caused due to conflict of third party software. I suggest you to restart the computer in safe mode and perform the clean boot to avoid conflicts.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Also, try to rebuild your icon cache and check.

  (1) close all programs
  2) click Start, and then type CMD (without the quoatation marks) in the search programs and files engine
  (3) then right click on the CMD program that appears in the list, and then select: run as administrator
  4) access: C:\Users\\AppData\Local
  (at the prompt enter: CD /d %userprofile%\AppData\Local now, press the "Enter" key)
  (5) now delete the IconCache.db file as follows: DEL IconCache.db /ah and press the enter"" key.
  (6) close the command window.
  7-restart the computer.

  Important: Microsoft recommends the use of security that one software alone both. With the help of many will create conflicts between them.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• Help, please. Power Diskearly module on a failed after recovery

  Hello community. Help, please. I had to get a vmware workstation from a backup after a hard disk failure. There is no lock file in the folder. I get the following error

  The virtual disk parent has changed since the child was created. The content of the virtual disk ID parent does not match the ID of parent for children's content

  Cannot open disk ' C:\Users\Adrian\Documents\Virtual Machines\Work Image\Work Image-cl1 - 000006.vmdk' or one of the snapshot disks it depends on.

  Power DiskEarly module has failed.

  Unable to start the virtual machine.

  See attached photo of files in the directory and VMX

  Help, please

  I don't know what is the cause. If you have enough disk space, you can try to create a clone of the virtual disk whose snapshots and attach this virtual disk to either a new virtual machine or the current virtual computer. Note: The vmware - vdiskmanager.exe is located in the installation of the workstation directory.

  VMware - vdiskmanager.exe - r "work Image-cl1 - 000005.vmdk" t 0 "work - Image.vmdk.

  André

• Could not load the PES 11 on computer refurbished (Win-7) - get message "the installation process has encountered an error during the installation of the shared technolgies. If please restart your system and try again. "- After the restart still the same

  PSE - 11 on computer given to nine (w-7) Impossible to load her get message "the installation process has encountered an error so that during the installation of the shared technologies. Please restart your system and try again".  Done it several times and still the same message. How to install correctly?

  Thanks in advance.

  http://forums.Adobe.com/message/5982666#5982666

• Programs are missing after the running virus scan

  Original title: all my programs were leaving swipped when I put my anti-virus on

  When I downloaded my spyware. He swipped all my programs such as my word of procecers.  am trying to type a paper and it is raining on my computer and my computer came with them which means that they did not come with a cd to redownload

  Hi bjrthuggin286,

  1. what programs are missing from the system?

  2. what spyware Antivirus software do you use?

  You can try a system restore to a previous point where you have not experienced the problem.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The videos are missing after the importation of the iphone

  Help!

  The videos that are on my iphone are missing from my iphone AND in window photo gallery. I want to cry, there was more than two years of special moments!

  Hi AnnMor,

  You did changes to the computer before this problem?

  You can search for video files by typing the name of the file, or from its tags, file type.

  For more information, refer to this link: find a file or folder

  For the issue of the iPhone, I suggest you to contact Apple support to see if they can recover the data from the iPhone.

  Hope the helps of information.
  Please post back and we do know.

• Original files are missing after re-installation (context.ctl test sequence)

  Hello

  After the passage of LV2010 to LV2013 my VIa are missing these files for eample

  LabVIEW test sequence - Context.ctl

  TestStand GetPropertyValue (String)

  I also reinstalled Teststand.

  How can I get the files back? I fdont know if they were part of Labview and Teststand-installation.

  Thanks for help

  TM

  She's.

  After a repair of Teststand installation files are back.

• How do I know if all the fonts are missing after packing?

  Hello

  Last week, I packed my InDesign files and sent to the printer, and he reported that he was missing a few fonts.

  I found the fonts (it seems that I have about three files of fonts, to various libraries, including, moreover, a folder of fonts in my InDesign file which did not have a single melting inside!) and sent to them and that was very good.  Re-packed and it seems another two fonts are "missing".  Well I found them too in a Microsoft folder (also in Office for Mac 2015)... so that's very good.  But my question is this:

  When I packed up the last time, I checked carefully to see if there is any lack of links, or any other problem.  And I didn't say that there is something to all the missing.  "0 errors", is what he says.  It is only when the printer got the files that he has noticed.

  Is there a way for me to know, before you send the files packaged, anything missing?

  Thanks for any help,

  Malcolm

  If you use InDesign CC and the printer has a copy of InDesign CC, they can load the Typekit fonts that you use on their copy.

  However, no doubt they are just using this version as a backup, and if your PDF has been successfully created, they will print from that.

• The collections are missing after moving to new computer

  I'm moving my Lightroom 3.6 to a new 64-bit Windows 7 computer and when I install it, my images and files are there, but my Collections are missing. No idea how I can fix this problem?

  Hi strychnine.

  Check out this link to perform a migration catalog Lightroom to the new machine:

  How to migrate LR to another computer | The complete picture with Julieanne Kost. Adobe TV