Error message saying signature not valid fatal error, System log files are missing or damaged 426 error when I try to install Windows XP.

Similar Questions

• Error when you try to install Windows XP Service Pack 3: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.

  Windows XP SP3 problem

  Recently, I met a problem with my PC and was forced to use the system recovery. Now I'm back to factory settings and try to install Windows XP Service Pack 3 on my computer. Windows Update won't work for me, that whenever I try to update I get [error number: 0x8024400A]. I think it's because I use Service Pack 2, or that's what I concluded after researching the problem, anyway.

  This is not my real concern, however. Because I could not get the update automatically, I tried to download and install the "Windows XP Service Pack 3 Network Installation Package for IT professionals and developers" myself. The first time I did it, I restarted the PC after the installation and was met with "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "  I went into safe mode and went to a just system restore point before SP3 was installed, but now I don't know how to install it correctly without encountering this problem after reboot. I'm hardly the easy just stick with SP2 when there are potentially important available updates. How can I get Windows Service Pack 3 is installed on my PC?

  It's certainly interesting!

  If the cause of your problem is to have a HP PC with an AMD processor and an original image on your hard drive (and of course it sounds like this is the case), the solution should be to rename the file intelppm.sys and launch the sp37394.exe patch. Once done, the SP3 file that you downloaded from here:
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24
  SHOULD work!
  I'm puzzled why there is no intelppm.sys file in your directory C:\WINDOWS\system32\drivers.
  Since you recently returned to square one with your PC ("return to factory settings"), then you may as well run the patch from this page:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=PV-60484-2
  and try the SP3 Setup file again.
  But, first, let's be absolutely sure that we are both using the same terminology. Please answer the following questions:
  1. have you safely backed up ALL your data?
  2. what method did you use to ride "back to factory settings? I think that your choices have been a destructive restore (full) and a (partial) non-destructive recovery. The first erases the disk and leave you with a pristine image and NOTHING ELSE (which means that all of your programs and data get deleted). The other (which does not always correctly) is supposed to leave programs and data intact.

• "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

  Original title: problems with updates

  I tried to install windows updates since the store won't let me update to 8.1 otherwise, but I've been miserably lacking 4 days in a row now. Commissioning Windows Update in Control Panel or the charm of parameters found 133 available updates and informs me that they will install automatically. If I then try to install progress remains at "downloading 0 KB", after a while updates are shown as installation. When the installation is completed I'm prompted to restart my pc. After the reboot if I'm greeted by the "Failure configuring Windows updates" screen for about an hour, then I'm able to reconnect to the desktop computer. I've been searching the forums for similar problems looking for an answer and trying different solutions, such as:

  Stop the update service then renaming or deleting the folder C:\Windows\SoftwareDistribution. No positive results on this one.

  Using SFC and DISM, first came up with my system is clean, the second did find and fix corrupt elements of store, but the problem persists.

  Download the tool for troubleshooting Windows Update from Microsoft page, who reported finding and repairing problens with service, but again without success.

  Reduce the installed updates at a time, in the instance that Windows can't handle most of the many updates at the same time. I tried this and it seemed to go well, but a strange point of interest that is so annoying is that several edits I checked are installing somehow, even if it is the only example that shows the number of updates being installed before restarting. Yet I always comes to the same conclusion. Failure of Windows updates the screen. What should I do?

  Hello

  Please update us with the State of the question. We apologize for the delay in responding

  1. You have a disk to install for Windows 8?
  2. Can you please explain what did you mean by update failed?
  3. Have you an error message when the update failed?

  I propose to perform the refresh once more using the Installation of Windows 8 disc, but before to perform updating please follow the procedure below

  Step 1: Repair of drive

  One of the best ways that you can check the alteration in the hard is to run a check disk on this subject. Please follow the steps below to repair the disk using the disk check.

  1. Open This PC by hitting on any fly in the Dashboard screen, quilting Search (or if you use a mouse, pointing to the top right of the screen, move the mouse down and then clicking search), recording this PC in the search box, and then tapping or clicking on This PC.
  2. Press on and hold or click the drive that you want to repairand then tap or click Properties.
  3. Tap or click the Tools tab, and then, under error-checking, tap or click check.   You may be prompted for an administrator password or to confirm your choice.
  4. Follow the instructions. You may have to restart your PC after that error checking is complete.

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Step 2: command tool (DISM) deployment image Service and management.

  By running this command, we can retrieve or modify information in an image. To run the DISM command, please follow the steps below:

  1. Go to the Windows Start menu.
  2. Type cmd on the keyboard.
  3. Right-click on the program from the command prompt and choose Run as administrator.
  4. The command prompt dialog box.
  5. Type the command Dism.exe / online/cleanup-image/Restore health and press ENTER.
  6. Wait for the command to run which can take about 30 minutes.
  7. After running the command, please try to make the backup of the system.

  The above information was hoping to get useful, please return it to us if you need additional assistance.

• Windows XP error when you try to install Windows Update

  I just installed Windows XP Home Edition with Service Pack 2 on my iMac under VMWare Fusion 4. When I use IE6 to try to download Windows Update, I get the following message: the site has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. "The website has encountered a problem and cannot display the page you are trying to display."

  Hello

  There are several cases were reported, or problems accessing the Windows Update If you have not installed service pack 3. Service Pack3 can be obtained here.

  http://www.Microsoft.com/download/en/details.aspx?ID=24

  Ignore the heaidng that says that it is a network installation package. I suggest that you install this download SP3 and to report if there are still problems.

  Tricky

• I get this error when you try to install windows live messeneger for windows xp: MICROSOFT ERROR REPORTING was unable to download.

  MICROSOFT ERROR REPORTING

  HR:0 X 80070641, I get this error when trying to install windows live messeneger for windows xp... any help please would be nice I have windows install 4.5 installed and it works fine. so it is not and I've tried everything I can think of any help please and thank you!

  Hello

  The question you have posted is better suited in the Windows Live community forums. Please visit the link below for any other help:

  http://windowslivehelp.com/product.aspx?ProductID=2

• Protect customer error when you try to install Windows Defender.

  Download windows Defender

  Download defender of windows after an error of installation of the process because of the protection of the customer how to remove this for instalation can continue?

  Hello

  1. have you installed Microsoft Security Essentials on the computer?

  2. do you have anti-virus software installed on the computer?

  If you have installed Microsoft Security Essentials, it has its own antimalware feature. You don't need or want to install Windows Defender, too. Leave MS Security Essentials installed and do not turn it off.

  Check if that helps.

• Error when you try to install Windows Live Messenger: 80070003

  I recently reinstalled my windows home edition 2002 sp2 exp, I tried several ways to install windows live messenger. I tried to get into the local users and groups, but windows xp home edition is not this feature, I tried to download does not work yet for registry cleaners. Can you please give me all the possibilities for this solution. I've been stuck here for at least 6 hours. haha thank you very much.

  Hi vincentShinoda,
   
  Follow the suggestion given in the below post and check if it helps in fixing the issue:
  Error code 0 x 80070003 during the installation of windows live messenger
   
  If that doesn't work, post your query in Windows Live Messenger Forums for assistance on this issue.

• 8007371B error when you try to install Windows Vista SP2.

  Original title: error 8007371B.

  Trying to update SP1 to SP2 via updates for months now, but still get this error. Tried Mr. Fixit and all others. Can someone please.
  Vista 32-bit. Just instaleed new RAm as someone told me that this could be the problem (Crucial recommended). always the same

  Hello. I tried to update SP1 to SP2 for months now, but it still fails. I have tried everything I have asked me to do it through forums but the old thread about this error looking dated 2010 so hopefully someone might have a will.

  The error I get is ERROR_SMI_PRIMITIVE_INSTALLER_FAILED_ (0x8007371c). I ran the SFC tool that highlights errors. The SFC details txt that I could see it was mistakes it (copied below). The question is how can I fix it.

  2012-10-03 19:32:45, Info CSI 00000119 [SR] cannot repair the military record [l:38 {19}] "NlsLexicons000a.dll" Microsoft-Windows-NaturalLanguage6, Version = 6.0.6001.18098, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-10-03 19:32:53, CSI Info 0000011b [SR] cannot repair the military record [l:38 {19}] "NlsLexicons000a.dll" Microsoft-Windows-NaturalLanguage6, Version = 6.0.6001.18098, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-10-03 19:32:53, CSI Info 0000011 c [SR] this element is referenced by [l:146 {73}] "' Package_1_for_KB955020 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.0.955020 - 2_neutral_GDR" "
  2012-10-03 19:32:59, CSI Info 0000011f [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:38{19}]"nlslexicons000a.dll '; source file in the store is also corrupted

  Moved from feedback
  Windows version not specified

  Hi, GMC,

  The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  If the System File Checker tool cannot repair a file, follow these steps:

  1. To a high command prompt, copy and then paste (or type) the following command, and then press ENTER:
     takeown /f

     For example, type takeown /f E:\windows\system32\jscript.dll.

  2. Copy and paste (or type) the following command and press ENTER to grant administrators full access to the file:
     ICACLS/grant ADMINISTRATORS: F

     For example, type icacls E:\windows\system32\jscript.dll/grant administrators: F.

  3. Copy and paste (or type the following command to replace the file with a known good copy of the file):
     Copy

     For example, type copy E:\temp\jscript.dll E:\windows\system32\jscript.dll.

  http://support.Microsoft.com/kb/929833#method3

  If you have already performed the emergency repair process and the computer still not working, it may want to make an upgrade of existing installation repair/site.

  Perform an inplace upgrade

  http://support.Microsoft.com/kb/2255099

• Error: "file 9xmigrat.dll on (unknown) is needed type the path where the file is located, and then click ok" when you try to install Windows Media Player 9.

  original title: WMP9 re-setup

  Hello. I use XP SP3 with all post-SP3 updates critical. Windows Media Player 9 does not work. When I try to reinstall, I'm stuck: the 9xmigrat.dll of file on (unknown) you need to type the path where the file is located and then click ok. I like WMP9 and do not want to use a newer version of WMP. I was not able to find 9xmigrat.dll

  This happens when I try installing to wmp.inf.

  If I try to install the MPSetupXP.exe, it does not either.

  Any ideas? TIA

  Thank you, David. It seems that the problem was caused by incorporating the updates for WMP9 using nLite. I made another CD of installation excluding these updates. A clean install of XP SP3 and WMP9 is working. Thank you for your response.

• Get the 0x8DDD0004 error when you try to install windows updates

  Error: 0x8DDD0004 occurs when checking for updates with the message "the site has encountered a problem and cannot display the page you are trying to view.  I have already installed and run Microsoft 'Fix - it' without success.  Windows XP SP3

  Ed,

  http://support.Microsoft.com/kb/914224/en-us

  UTC/GMT is 21:03 Sunday, July 29, 2012

• I get a code 800706BE error when I try to install Windows Update.

  The last update on my computer for windows KB928439 July 4, 2011 failed and had an error code 800706BE. I have an update successful since then. Looking for reasons, I'll get you into this error code and to know why the update failed to load.

  Unfortunately, I can't find the error code. Can someone help me solve the problem please?

  Original title: unable to update windows

  Hi Jono,

  Follow the troubleshooting steps in this thread to solve the 800706BE error. Measures should also be applied to Vista. You can also find the links below useful:

  Reset the Windows Update components

  Cannot install some programs and updates

  Windows Update scan tool

  Please follow all the steps and if the problem persists, return back and we will be happy to help you.

• get the fatal error when you try to start Windows 7 Easy Transfer...

  get the fatal error when you try to start Windows 7 Easy Transfer... what should I do?

  Hello Jo,.

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  What is the full error message or code when you say, ""getting fatal error when you try to start Windows 7 Easy Transfer? '"

  Thank you for details on the issue.

  This problem may occur because of damaged or missing Windows files.

  I suggest you run the system file checker (SFC) and see if it helps.
  Reference:
  Use the System File Checker tool to repair missing or corrupted system files
  https://support.Microsoft.com/en-us/KB/929833

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Blue error screen "stop0x0000003E" appears when you try to install windows vista (R) service pack 2 - that's what I've shown in after I try to install the update? is this a problem or not?

  The problem I have is listed on the feald above, but there are once more my question: blue screen "stop0x0000003E" error when you try to install the service pack of windows vista (R) 2.

  Free unlimited installation and compatibility support is available for Windows Vista until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I get the following error message when you try to install Windows Live Essentials for Windows 7-64-bit: __One installation files seems to be corrupted. HR:0 x 80070003

  I get the following error message when you try to install Windows Live Essentials for Windows 7 64-bit:
  One of the installation files seems to be corrupted. HR:0 x 80070003

  Hello Amawob,

  Thank you for using the Microsoft answers Forums.

  Solution:

  Follow the steps in the web link below.

  You cannot install some programs or updates.

  http://support.Microsoft.com/kb/822798

  Reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

  That should solve the problem for you.

  Thank you.

  UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

• When you try to install Windows Defender I get an error message "Service"Windows Defender"(WINDEFEND) could start. Make sure you have sufficient privileges to start system services.

  Original title: could not start the Service "Windows Defender" (WINDEFEND)

  When you try to install Windows Defender, I get an error message that

  "Service"Windows Defender"(WINDEFEND) was able to start. Make sure you have sufficient privileges to start system services.

  How can I check which privileges I have and I need?

  I noticed in the management of the tasks that Norton symlcsvc.exe ran and I was wondering if it was who collide with the Defender, so I temporarily stopped Symantec process running in the field of Services, but still had the same result, try to run the installation of the Defender.

  Help please

  Hello

  This error message is because you have Norton installed on the computer. See the for more information section below.
  http://www.Symantec.com/business/support/index?page=content&ID=TECH103119&locale=en_US

  Let's try the steps and check them off below if it helps.

  Step 1: You can try to uninstall Norton and then check if the problem persists.
  Note: Reinstall Norton after verification.
  Reference: http://support.microsoft.com/kb/307895

  Step 2: Change the registry value and check.

  a. Click Start, type regedit.exe and press ENTER.
  b. navigate to the following location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender\
  c. right-click on DisableAntiSpyware, on the right panel, then selectEdit.
  d. enter 0, under value data, and click on the OK button.
  e. close the registry editor.
  f. restart the computer.

  Registry warning:
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]