Help, please! GoDaddy email no longer works after BC by a switch

Similar Questions

• GoDaddy email no longer works

  As I spent the thing DNS in GoDaddy to host my site with BC Muse, now my GoDaddy email does not work. How can I fix it? Thank you.

  GoDaddy will provide you with the following MX records you will need to add to your site:

  MX 0 smtp.secureserver.net

  MX 10 mailstore1.secureserver.net

  You will need to add them to your site via Site Settings > Site areas > more Actions > new MX records. The value 0 and 10 in the MX records provided by Godaddy refer to the priority. However, BusinessCatalyst not currently has the ability to specify a priority of 0. This isn't a problem because the numbers do not need to be accurate, they just need to be in the right order, due to the fact that the smallest number of preference has the highest priority. The TTL that you specify is not very important with regard to the implementation of your MX records, so specify what you like.

  Thank you

  Vinayak

• HTML of Smartphones from blackBerry eMail no longer works after change of 8100 to 8310

  Hi all

  I have a 8100 Pearl, which I've upgraded to version 4.5. Then I could receive and read emails in HTML, very nice.

  Now, I got a Curve 8310 which I also upgraded to 4.5 support HTML eMail. As an ENCORE, I changed the code PIN and IMEI numbers and the new device has been saved.

  Now when I put E-mail HTML format and receive an HTML eMail, it only shows a few lines (in nice new HTML) or even nothing and a hint that more data is available with the number of bytes left. If I choose the option 'More' on the device, data transfer starts, showing the curve gets more data. Then the watch plus-donnees-Hint that only more a byte is available, but the message is always the same, showing only the first lines or even nothing. Repeating data more does not help. Seems that the device has a problem, the analysis of the data.

  What I tried:

  -Hard reset of the device

  -Remove all the service books

  -Return the BIS service directories

  -Enable/disable HTML mail on device

  None of these permits.

  Network is German Vodafone. Both devices (Pearl and Curve), run the Vodafone software.

  By the way: if I switch to text mode, I see the entire message, but of course not formatted in the older format. Switched back to HTML shows only a part of the message or nothing.

  Does anyone have an idea what's past? Or who should I contact? There is no line of support for prisoners on the blackberry site.

  Thanks in advance.

  Joerg.

  You cannot delete the entire account, e-mail accounts just BIS.

  In this order, after the deletion, also delete the service on your BB books.

  Restart the BB, (battery, replacement and reset).

  Look at and confirm that the SBs have disappeared.

  Now, reset the BIS email accounts and send the SBs again if necessary.

  You should get the new registration on the BB messages... and you may need to perform a reboot of bpull of battery again.

  This process, in that order, make sure you get the NEW books service, rather than simply write on 'old'.

• BlackBerry smartphone Email no longer works after the transfer to the new phone

  I turned on the weekend in a phone of the company on my own phone.  At the dealership, they used the BB SW Office to cross all the information of the previous phone into the new.  Everything went through fine, except my Blackberry e-mail address.  I was able to set up a Gmail account without problem, everything works fine, but I can't get the Blackberry email address ([email protected]) works correctly.  This is a valid email address, I used until few days back.  I tried to add the e-mail manually, but he claims that the email address or password are incorrect.  I tried to request a new e-mail address of BB, but the same as the one used, and the answer came back that I can't use this address as he is already taken (I know - it's mine).  I have a support call in and spent almost 2 hours trying different things with them, but so far without success.  I would be grateful if anyone has any ideas on how to solve this problem.

  ViciousFerret,

  Thanks for your reply, but that has now been resolved.  I called support Blackberry again Tuesday and was related to a person who really understands the problem.  Finally, there are two problems.  (1.) that the email address was always associated with the old phone; (and 2.) When they put in the new phone service, they did for two service providers - SaskTel, as he should have, but also of Bell, which should never have been there.  Once they removed the provisioning for Bell, everything worked fine.

• Touchpad no longer works after the clean boot

  Own, I started my laptop today, following the steps on http://support.microsoft.com/kb/929135. After the first reboot in clean boot my laptop touchpad scroll bar stopped working. I can now scroll using only the arrow, or quiet mouse clicks on the arrows at the end of a ScrollBar to the screen. In addition, I can't select any text with my touchpad now. All this happened after the boot process. What has gone wrong? How to fix?

  Original title: scrolling Touchpad no longer works after the clean boot

  Hi lauranne.

  What is the brand and model of the computer?

  I would like to put the computer into normal mode and check if your able to use the touchpad.

  See the section "How to reset the computer to start normally after a boot minimum troubleshooting"

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  If you still have questions, please refer to the article to give below, and follow the instructions.

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-in/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you more

• URL Bar Search no longer works after update and no research options available!

  URL Bar Search no longer works after update and no research options available!

  "URL Bar Search" which is an extension? Or are you referring to the address bar, sometimes called the address bar?

  Let's try a few basic trounleshooting.

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click on the menu button , click Help , and then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  Let know how's going on.

• Flash player no longer works after safari 10

  Help! Flash Player no longer functions after the update Safari 10 22/09/16. His need for my childs home schooling... How can I fix? I reinstalled flash, rebooted, cleared on safari etc and it still does not work. All SWF downloads only instead of jumping in a reading window.

  Thank you!

  If you have installed the Adobe Flashplayer correctly and for the first time in Safari 10, you must activate it in the Safari preferences panel: Security: Internet Plug-ins: √ allow Plug-ins (plug-in settings...). In Control Panel, you will see a place to pick up Adobe Flash Player and a selection (when visiting other Web sites: on.) Then click done. Quit and then restart Safari.

  Working in the restoration of the functionality of Flash Player?

• VPN access no longer works after upgrade from 10 IOS!  Any input to fix?

  VPN access no longer works after update IOS 10!  With the help of an iPhone 5 or 6, our employees use their hotspot phone to connect to our VPN.  Suddenly, he broke Monday after the upgrade to IOS 10.  We have experienced many versions of IOS, and it has always worked.  Any patch available?

  Hello howlindaug,
  Thank you for using communities of Apple Support.

  If I understand your message that your employees will no longer be able to connect to your virtual private network with their iPhone 5 or 6 after the upgrade to iOS 10. Sierra Mac OS and iOS 10 delete a VPN profile PPTP connections when a user upgrades from their device. If your VPN is a PPTP connection, you'll want to use one of the options listed in the section below:

  Prepare for removal of PPTP VPN before upgrade you to iOS 10 and macOS Sierra
  

  Alternatives for PPTP VPN connections

  Try one of these other VPN protocols for authentication by user that are safer:

  • L2TP/IPSec
  • IKEv2/IPSec
  • Cisco IPSec
  • VPN SSL clients on the App Store, such as those of AirWatch, Aruba, Check Point, Cisco, F5 Networks, MobileIron, NetMotion, Open VPN, Palo Alto Networks, Pulse Secure and SonicWall

  Best regards.

• Tap to click and three fingers slide no longer work after El Capitan update - MACBOOK AIR early 2014

  Things no longer work after the update are:

  1. TAP to click (I checked it on SYS PREF > TRACKPAD > tap-to-click)

  2 finger three windows

  3 Thre finger of several files and text selection.

  I have selected three fingers slide accessibility and options of the trackpad iv done 4 fingers to mision statement and app expose, but the problem is that these feature mission statement and the rest three fingers still work. :@

  It was just beautiful in yosemite please give a solution.

  Please read this message before doing anything.

  This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.

  Step 1

  The goal of this step is to determine if the problem is localized to your user account.

  Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

  While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

  Test while signed in as a guest. You have to re-create your trackpad settings. Same problem?

  After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

  * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.

  Step 2

  The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Please take this step regardless of the results of step 1.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.

• My internal microphone no longer works after that was plugged in a mic

  Hey guys!

  I bought the HP Envy 13 spectrum (13-2113TU) earlier, and everything was smooth and functional until yesterday when I plugged it in one of these headphones with the MIC designed for phones in the 3.5 mm plug. For a second, that it did not work, but after that the external microphone worked fine. However, I find that after using the earphone, the internal microphone no longer works on Skype or any where else and it seems there is no way to test whether it is functional or not.

  In the audio Panel, there is only the stereo mix and microphone option external availible under recording devices. I checked the boxes that says see the disabled and disconnected devices but there seems to be no way to activate the interal peak. All audio drivers are up to date and nothing is cut.

  Nobody knows what is happening and what are the steps I could take to solve this problem. Thank you.

  Hi Shabab,

  I understand that your internal microphone no longer works after that a microphone is plugged into your HP Envy 13 of spectrum. If you follow this document on the microphone does not work after a webcam or a microphone USB is installed, it should solve your problem.

  http://support.HP.com/us-en/document/c01926155

  I hope this helps.

  Thank you

• The Styles of bindings are no longer works after the new update. (2015.1)

  The Styles of bindings are no longer works after update of the MUSE 2015.1.

  Hello, would you be able to send your Muse file so that we can investigate more? When I tried to reproduce the problem, I am not able to see it with a whole new file of Muse.

  Please send your application to [email protected], with "attn:Jason" in the subject line and a link to this forum topic. If it is greater than about 20 MB, please use a sharing as Dropbox service.

• Help, please. Submenus do not work in preview or publish

  Help, please. Submenus do not work in preview or publish, of the A template that the drop down not at all, the master B it falls but with no text - links are here and work, but the drop-down list together is just black space with any of the white text. In design mode they all look very well.

  This is my site if you want to see: http://workshops.deepseaastronauts.com/index.html

  Please help - urgent bit.

  Hi Alli,

  I sent you an email asking for your details.

  Please share the same and we will contact you for assistance.

  Kind regards

  Akshay

• I have Acrobat 7.0 upgrade 7.1.4 which surprising no longer works after upgrading my mac os

  I have Acrobat 7.0 upgrade surprising 7.1.4 is no longer works after upgrading my operating system mac OS 10.8.5 (mountain lion), which gives an err message that system supports more PPc applications. I guess that Acrobat 7 is a PPc application and I wanted to know if there is no work here to be able to continue to use this product? I don't see this entry.

  Yes. The feature, called Rosetta, let the Intel Macs that use execute code written for PPC. Software not hardware. He was quietly abandoned. Maybe a Lion.

• The lightning no longer works after upgrade to 45.2.0

  After upgrade of tuberculosis at 45.2.0, the Lightning has stopped working. There is more no sidebar on the right side of the window of TB, and no timetable is on the menu entries. Update version 4.7 Lightning has not changed the situation.

  The platform is Windows 7, 64-bit.

  Since he asked in another question on this topic, a screenshot of the Add-ons Manager is already determined.

  Because it no longer works after upgrade from TB. See the title.

  In any case, I Meanwhile downgraded TB once and once again, updated that solved the problem.

• My Equium L40 no longer works after update BIOS!

  Hi friends...

  Please, I need a help.
  I updated my computer laptop bios v2.00 v1.60 and after that it no longer works.
  When I try to turn it on nothing happens.

  Maybe I need the original BIOS.

  Who has a solution? What can I do?
  Could someone help me?

  Thank you!

  My laptop is a series of Equium L40 - PSL49E - 156

  Hello

  I can tell what you have to do now
  You will need to contact the ASP in your country for assistance

  Yes, you have the technician ASP.
  I assumed that the ROM module where the BIOS is stored has not properly been flashed.
  I think that the ASP will try again by using a special version of the flash BIOS

  Good luck