My Equium L40 no longer works after update BIOS!

Similar Questions

• Touchpad no longer works after update BIOS on Satellite A500-1GL

  Hello world

  I just bought my laptop Satellite A500-1GL today. I started at the top and plays a bit (nothing serious). The touchpad worked very well at the moment.

  Then I discovered this tool to update the material and the update of the BIOS that worked without any problems. After I restarted the laptop, BIOS, loaded the default values of the installation and recorded.
  After that Windows 7 (x 64) started the touchpad no longer works...

  I downloaded the driver here and installed again once, still does not. I went into the BIOS, disabled the touchpad (I thought that maybe it's a bug...) and started again. It still does not...

  I enabled it again in the BIOS, tried to push the function + F9, but it still does not... Finally, I used the recovery and installed a Windows 7 costs.
  But unfortunately it still doesn't.

  Now, I'm out of ideas, can anyone help?
  Is there a chance to get the older version of BIOS to downgrade it?

  Thanks in advance ;)

  Hello

  It seems strange that after update Bios touchpad no longer works.

  > Is there a chance to get the older version of BIOS to downgrade it?

  To be honest, I don't know where to find. In any case, do a search on Google. Perhaps, other users of the forum can give you a link to download.
  The downgrade of the Bios is riskier upgrade procedure. So, be careful the next time...
  Advice for the future; Do not touch the running system.

  Good luck!

• Satellite A300 - Touchpad no longer works after update BIOS

  Hello

  After the upgrade of the bios of my Satellite A300-1NJ version 1.70, the Synaptics touchpad stopped working at all!
  (I tried with ubuntu liveCD check is not a driver problem)

  Older bios is no longer available from Toshiba Web site!

  How can I solve this problem?
  And thanks for the help.

  Hello!

  The touchpad can be validated with FN + F9.
  Check it!

  In addition, try to use an external mouse. It work?

  Good bye

• Satellite P300D-h-13: Bluetooth no longer works after update BIOS 3.30

  I have a huge problem with my bluetooth module integrated on Toshiba P300D-h-13.
  It worked great until I have not flashed Bios to version 3.30.

  Now, I do not see my module and when I start battery bluetooth, it says that I should plug my camera.

  Plese help me or give me a link to older firmwares bios?

  You define the default BIOS after the update?
  Isn't it? Then do it.

  Have you tried to activate the Bluetooth using the function keys after the update of the BIOS?

  PS: don't think that its probably the Office BIOS issue is related to the other grounds
  What system do you use?

• CD/DVD no longer works after update BIOS of yesterday

  HP Pavilion dv7-6b55dx

  Win 7 64 bit

  I solved the problem with the audio that created the update, but now to discover that my DVD/CD is unusable.  I don't see the driver available to replace it.  Tried to reinstall the driver I have on my PC and got the error message

  Windows cannot start the hardware device because its configuration (in the registry) information are incomplete damaged (code 19)

  Help, anyone?

  Endy9 wrote:

  I tried a DVD player USB which also cannot use the info registry now damaged on the DVD drive external.  Do you really want everyone (I've seen dozens of messages on bulletin boards, and it's just what I've seen) to believe that it is a coincidence that immediately after installing this BIOS update hardware failed and corrupt just pilots themselves.  Please, I beg you.  We have an adult discussion about this.  The process of updating these registry settings can be affected if the real drivers belong to HP or not.

  If you notify me that I reinstall the BIOS (guess I can do no harm, since I already have downloaded audio drivers to reinstall) the registry information for my DVD will be fixed?

  BIOS do not affect or touch the registry somehow and there is no need to relocate the BIOS but you can reset the default BIOS. You could link me to these forums you're talking and if not. cases are of a scale that is having the same problem, the update of the BIOS can be studied.

  Since you said that even an external DVD drive is also not recognized its certainly a matter of s/w.  Could try to use a restore point was working on your dvd player? I know that you did a restore to a date before you installed the update to the BIOS, but you can try a diff. one?

  In addition, you can restore your BIOS downgrade (F2-System Diagnostics) If you feel/think the BIOS update is a cause of the problem.

• URL Bar Search no longer works after update and no research options available!

  URL Bar Search no longer works after update and no research options available!

  "URL Bar Search" which is an extension? Or are you referring to the address bar, sometimes called the address bar?

  Let's try a few basic trounleshooting.

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click on the menu button , click Help , and then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  Let know how's going on.

• Location (GPS) service no longer works after update of Os 9.3.2

  My GPS service does not work after update os on IPHONE 6 64 GB. Deleted, hard reboot as well os re - load os, I did, but still unresolved question and google Mao or Apple card does not. It seems that many Iphone user have the same problem after the Os update to 9.3.2.

  My wife also have the same model and updated to Os, but its Google map works perfectly. have online search of dome on the solution, but no luck.

  How to solve this problem?

  Hello, jayantg,

  Thank you for using communities of Apple Support.

  I see that your GPS service stopped working after the update to iOS 9.3.2. I use location Services on my iPhone, so I know how much it is important that we get this problem is solved. I have something I want you to try.

  Job to the subject of privacy and location Servicesand ensure that the location service is enabled and learn how the precision of GPS to improve, in particular, these two sections:

  Enable or disable location Services

  You can enable or disable location Services in settings > privacy > location Services. You can enable location-based Services during the wizard process of installation or later through the creation of location-based Services. You can individually control applications and system services have access to the data of location Services. When location Services are disabled, the apps can't use your position in the foreground or background. You will thus limit the performance of various Apple and third-party applications.

  

  Settings > privacy > location Services.

  

  Settings > privacy > location Services > System Services.

  Improve the accuracy of GPS

  GPS accuracy varies according to the number of visible GPS satellites. Location of all visible satellites can take several minutes, with accuracy gradually increasing over time. Follow these tips to improve the accuracy of the GPS:

  • Make sure that you set the date, time and timezone correctly on the device in settings > general > Date & time. If possible, use the value automatically.
    Important: Incorrect settings on your computer can sync to your device. Check the date, time and time zone on a computer that syncs with your device.
  • Restart your device.
  • Make sure you have a cell phone or Wi - Fi network connection. This allows assisted GPS (A - GPS) on the device to locate the fastest visible GPS satellites, in addition to providing information about the initial location using Wi - Fi or cellular networks.
    Microcells (sometimes called Femtocells) are not supported with location Services.
  • Keep a clear view of the horizon in several directions. Please keep in mind that walls, vehicle roofs, tall buildings, mountains and other obstacles can block the line of sight to GPS satellites. When this occurs, your device will automatically use a Wi - Fi or cellular networks to determine your position until the GPS satellites are still visible.

  All the best.

• HP Total Care Advisor no longer work after updates

  advising HP total care stopped working after updates running... tried to reinstall the software nothing works.  I get the following error...

  HP ADVISOR HAS STOPPED WORKING CORRECTLY, WINDOWS WILL CLOSE THE PROGRAM AND NOTIFY YOU IF A SOLUTION IS AVAILABLE.

  http://h30434.www3.HP.com/

  HP's Support Forums at the link above.

  http://welcome.HP.com/country/us/en/contact_us.html

  You encounter a problem with the software of HP, try their Forums, or contact HP directly at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Logitech's ' back' button no longer works after update 6.0.2

  The navigation buttons (back and forward) on my Logitech mouse worked correctly in all versions of Firefox, I used it, including 6.0.1. I've just updated to 6.0.1 and the buttons no longer work. I tried Opera and Internet Explorer, and confirmed that the buttons work properly with these browsers.

  Hmm...

  I had this problem on 6.0.1.

  And then I decided, since I already have the problem, I'll just upgrade to 6.0.2 and see if it works.

  The same problem.

  And then some powers-that-be, the problem fixed itself.

  (person but me using my computer, so I have absolutely no idea of what I did to fix.) Maybe after restarting the computer).

• HP Solution Center no longer works after update of HP Officejet J6480

  HP will provide an update to fix this problem?  If anyone has had the same problem (if so, how fixed?)?

  HP has pushed down the updates on a week earlier for my HP Pavilion Elite e9270f running Windows 7 64 bit home and domestic all-in-one Officejet J6480 which are connected wirelessly via my network.  HP Solution Center had worked for several years until then, but now can no longer connect to the J6480 with all the features.  Devices and printers in Control Panel displays the connection.  HP HPHNDU.exe utility displays the connection.  Print from works of MS Office products as ok HP Solution Center no longer works.  I can't scan documents to the PC (that it is pulled by the PC or pushed by the J6480).  I used http://support.hp.com/us-en/document/c02266743 instructions and the software of HP Officejet and Driver Removal Utility OJJ6400_Scrubber_13.exe to remove all aspects of the printer and the software.  Then reinstall them using (with HP printer install wizard HPPIW.exe), but the new installation also fails linking the center of solutions HP (printing still MS Office programs).  According to me, it is a plague of HP inflicted that should have a solution from HP.  FG 120201

  Hi MFredV & 2015,

  Sorry to hear you've had the problem with the printer after you run the update. Please follow the steps below and let me know if you continue to have problems?

  Try using the brush included in the CD or download.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-79309-1&CC=US&DLC=en&LC=en&os=4063&Product=3635378&sw_lang=

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-79309-1&CC=US&DLC=en&LC=en&os=4063&Product=3635378&sw_lang=

  10. run the download to reinstall the printer

• Paste function central to the mouse no longer works after update

  I think that FireFox has been updated last night. Since then my central block the mouse function no longer works.
  I have not installed any addons or changed settings either.

  I want to talk to: subject: config > middlemouse.paste = true

  I tried it switch etc but nothing I can do, it takes. Any ideas?

  This problem has disappeared from Windows updated itself.

• Touch screen no longer works after update to IOS 9.3.1

  MY touch screen of my iphone + 6a stopped working after the update to IOS 9.3.1. I tried force closed all day and it made no difference. does anyone know how to fix this?

  I have exactly the same problem with the same Iphone with IOS 9.3.1 + 6

  The only way I can get to work again for a light moment is to reset the Iphone now deep-set buttons home and power together until it restarts.

  It works for a short period of time, and then it freezes again.

  Started to occur immediately after the update restarted the phone.

• T420s: audio no longer works after update to 8.1 Windows

  Hello.

  Conexant SmartAudio HD (driver 8.32.43.0) 20672 stopped working after I updated to Windows 8.1.

  Everything looks ok, no error message when I start up Windows and Device Manager shows no "this device works properly.".

  But when I try to play a file on the Zune or VLC, I hear no sound. When I try with music metro app, an error that says:

  "Can't play. Make sure that sound cards and video of your computer are working and have the latest drivers, and then try again.

  0xc00d11d1 (0x8007007e"

  I tried the troubleshooting tool, but it is said that he could not identify the problem.

  Everyone had the same problem?

  Thank you.

  After you remove the audio device via Device Manager and rebooting, the problem has been resolved.

• Acceleration GPU Mercury Playback no longer works after update

  I just updated all my Adobe software for the first time since getting my new workstation and my Mercury GPU acceleation no longer works (software only). I run a GTX 670 (version 9.18.13.697 driver) and Premiere Pro 64-bit (version 6.0.3).

  Any suggestions? It literally happened in the middle of a project just today and I am puzzled.

  --

  Stephen

  Re-apply the 'hack' in your cuda_supported_cards.txt file.

• E7440 SD card reader no longer works after update November 12 W10

  Since the last update of Windows 10 that came on November 12 the drive in my Dell E7440 SD card no longer works. I've tried different drivers, but when I look in the detail it shows the following:

  PCI\VEN_1217 & DEV_8520 & SUBSYS_05CB1028 & REV_01\4 & 32 c 44212 & 0 & 00E4 had a problem starting.

  Driver name: oem4.inf
  The class GUID: {4D36E97B-E325-11CE-BFC1-08002BE10318}
  Service: O2FJ2RDR
  Lower filters:
  Upper filters:
  Problem: 0 x 15
  Problem state: 0x0

  Simply, it does not show the SD card, and even when I remove all the drivers, restart and install again it does not work. Is this a known issue? Is there a solution already? Windows 10 worked very well in combination with the SD card reader until this update.

  HM, probably it is related to the BIOS update then. I flashed A15 and the SD card works again. I also found others on the internet with the same problem, so A16 BIOS should not be flashed for this model if you want to continue using your SD card reader.