Help, please! Title page of the browser view problems.

Similar Questions

• Help, please. Back to the Quiz creates problems

  Thank you for reading this issue.

  I use 6 Captivate with all updates.

  I have a long tutorial.  I wanted to put in place corrective measures, which means that the learner, when the quiz, you be reshipped to the slide with the answer, then returned to the question quiz that he or she missed.

  This should not be a problem.  However...

  That the learner progresses through the lesson (not the quiz section) the first time and gets the slide just after 'jump to the quiz', the slide seems to stop at first, showing initial content, but stopping.  He plays the audio and there is no additional information in the slide.  If you press play at the bottom of the course, it processes as usual.  What happens to all the slides when the restoration is requestion.

  Details: For each question in the quiz, I put 'Last attempt' to move to the slide.  The slide provides the correct information located on the course.  That's all what I changed to Quiz properties.  Let's we jump to slide 26.

  Slide 26, I click my button to continue.  Action, I change the option for "success" to "resume the quiz.

  Here is some of the best.  So when published or read, we come to slide 26 without problem.  As it processes to slide 27, is where it shows initial information at time 0, but does not continue, or audio plays.

  A test, I deleted all slide 27 except for audio, or other executives.  Not good.

  What is happening to the actions of all THE «back to the quiz»

  It shouldn't be rocket science.  But I'm totally stuck in the water.  If anyone knows what I'm doing wrong?

  Published as executable, seen in FF and latest IE, as seen in Captivate.

  Thank you!

  Well, I found the answer.  I was duplicating slides, and apparently it works well with return to element quiz.  Still don't know why, but when I created new landslides, sanitation, worked perfectly. Go figure. Hope this helps someone else out there who has a similar problem.

  Mark

• Help please: how to cancel the divs PA Tables

  I think I did something stupid! I was playing around in Dreamweaver and I was looking under the tabs > modify > convert > Tables to AP divs. So I clicked on "Tables divs PA" (just to see what he would do) THINKING than what I would have done it I would be able to "undo" - well no, I could not cancel. The page is titled "RequestOrder. Then I opened another page, called "RequestInspection" and it has also seen this page! I opened another site and all pages, titled 'Application [any name]' also has the same effect! All pages that have no "Request" in the title were not conducted.

  Can someone please tell me what I did wrong and how to cancel it please? When I look at the pages in the browser, everything seems normal. But I want all of this to go back to the way it was.

  I learned my lesson - do not just click on something just to see what he does... usually I don't get in a situation where I can't cancel something.

  Thank you very much!

  -J

  Example of what looks like the page in Dreamweaver:

  

  If you base this 911 call on the appearance of the screen in Design view only?  Look in Code view.  Do you see tables or div tags?  Try using the VIEW | Grid > show grid.  He disappears?

• I'm having a LOT of trouble to update photoshop elements 14! Help, please. I entered the serial number, but do not click NEXT!

  I'm having a LOT of trouble to update photoshop elements 14! Help, please. I entered the serial number, but do not click NEXT!

  You can use the appropriate link below for your installation files

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.5 | 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• cannot preview page in the browser

  Muse has just stopped displaying the page in the browser.  To help to win 10 and Edge as browser.  Any ideas?  Also this new update seems to work very slow compared to the earlier version.  Does anyone else know this?

  For other people with this problem.  The solution was to install a different browser beside IE and Edge.  I installed Chrome.  Then do a preview.  It worked.  After that IE and edge began working again. Good luck.

• Impossible to get a preview of the Page in the browser on the first try

  

  Hello, when I go into file > Preview Page in the browser (Ctrl + Shift + E), it shows the error message above. But when I try again, it works. It takes sometimes 2-3 tries, but eventually it works. What's wrong the first time? Thank you.

  -Kelly

  Hi Kelly,

  Could you please try some steps proposed in this thread.

  Adobe Muse - Preview failed

  Let me know if you have any question.

• Adobe Muse: Why I can not get my page to scroll vertically to display the content of the page in the browser preview?

  Adobe Muse: Why I can not get my page to scroll vertically to display the content of the page in the browser preview?

  I am a novice and I do not talk about the web, so please excuse my ignorance!

  I content on my web pages in Muse design that descends below the visible window, but when I go to preview in browser, it only presents a preview which is visible in my window. Of course, I can press command + /, but I should be able to use my mouse wheel or my scroll bar to see the lowest content. I just can't understand how do! Is this something to do with the positions of Master Page header footer? They all look fine and normal and all the other sites I've done. In ADDITION, I checked non paged area (Mount table), and there is NO hidden content.

  I tried to move my content down (to 'wrong' it to enable vertical scrolling). I tried to move my foot higher than the content, but all useless page.

  Preview in browser = will just not scroll down.

  Hope it's a simple solution. Thanks in advance.

  See you soon,.

  I had the same problem and it took me almost 2 days to find a solution.

  See if that solves your problem (if all goes well it has been resolved since you posted).

  1. in the model Master, click on Page > Page Properties > metadata

  2. remove the small piece of code next to the body tag-{overflow-y: hidden}

  3. click on OK, then get an overview of your pages.

  

• Keep old links and add new links to the title page of the document

  I was given an interactive pdf to update. The work on the title page insrtucts the Viewer to click on a highlighted product to a product page in the document... The revised document that ancient works of art and the links will remain in the same place, but other products have been added that will be tied to additional product pages. So I have to change the basic art, is it possible in Acrobat to replace the old work base with new art without distrubing the former basic links?

  Links are a form of markup. Create the page PDF of the work. Open the old PDF (or better a copy), then replace pages allows you to replace the basic document page. The markup should not be affected.

• How to automatically center the page in the browser window

  Somewhere along the way, I remember coming across a very simple way to automatically focus your web pages in the browser.  Could someone remind me how it's done.  I think it's an order in one step among the toolbars, located along the upper part of Dreamweaver, but I looked through them and can't find it.  I also tried application center alignment my wrapper div that holds all my content, but who did not do.

  Thank you.

  {#wrapper}
  background: #AEADB2;
  padding: 0px;
  height: 660px;
  Width: 960px;
  position: absolute;
  z-index: 2;
  Auto margin: 0;
  border-style: none;
  Top: 0px;
  text-align: left;
  }

  Thanks again for your help.

  I didn't know you were in the position: absolute on the wrapper div - that is why it is always best to ask for a link - which I did not in this case :-)

  position: absolute;

  For the wrapper div, change this:

  position: relative;

  and it must be centered - he did when I edited the css in Firefox :-)

• Hi someone help please I am signing the apple tv correctly and it says the password for itunes that is incorrect. However, I am now connected from my computer and it is OK

  Hi someone help please I am signing the apple tv correctly and it says the password for itunes that is incorrect. However, I am now connected from my computer and it is OK

  Have you tried to reboot your router, correct your location settings, you use audit stage 2.

• I reinstall xp on my toshiba laptop Dungeon wonders for SDBUS. SYS file that is not on the cd help please, I did once before without this problem

  I reinstall xp on my toshiba laptop Dungeon wonders for SDBUS. SYS file that is not on the cd help please, I did once before without this problem

  Please try to use different CD or simply remove the CD then insert again the installation request for the files.

• laptop (Dell Inspiron) with Windows 7 Home Premium is now slow to most of the activities - loading of the pages in the browser, etc.

  I heard that after a few years of use, Windows-based computers lose their ability to function. This happened to me before and I bought a new laptop. Now, I think that it happens again. The laptop (Dell Inspiron) with Windows 7 Home Premium is now slow to most of the activities - loading of the pages in the browser, etc... He is also declining my VPN connection occasionally, but also my direct connection is very slow. Latency shows speedtest software provided by the ISP in addition of 250 ms, download speed of 1 MB/s (compared with 8 planned) and 0.05Mbps download. The ISP has corrected this once, but I'm wondering now if it is the computer which is slow rather than on the network because my laptop works well on the same network/router. Is there one solution to this other than another new laptop?

  Jonathan,

  You say that your computer is slow, but all of the examples you give are rather than slow computer operations slow network communications.  To avoid any unnecessary work, check how fast the computer is on the tasks that don't use any network.

  If it works fine for tasks not network then you can concentrate on the problems of network as being the only concern.

  It has also become very slow for no network tasks you should study other causes.  Just as an example: If, like me, you sleep / turn off the computer when you are not using it then defrag will never work, so you can run it manually to make sure that doesn't cause problems.   Describe your symptoms in this thread so that someone can advise on the best course of action.

  In the unlikely case where you must run Dell Factory Image Restore, then the instructions are in your manual PC *.  Before doing this, run Dell Datasafe Local Backup then click on Backup, recovery to create - media allows you to create a bootable USB of the partition that you can use the normal procedure that failing Dell Factory Image Restore [to do this, even if you have already solved your problems so that you could face if the hard drive has failed never completely].

  * Procedure Dell Factory Image Restore [excerpt from the manual for Dell Inspiron 1545]

  1. turn on the computer.

  2 when the Dell logo appears, press several times to access the Advanced Boot Options window.

  Note: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop; then, shut down your computer and try again.

  3. Select repair your computer.  The System Recovery Options window appears.

  4. Select a keyboard layout and click Next.

  5. to access the recovery options, log in as a local user. To access the command prompt, type administrator in the user name field, and then click OK.

  6. click on Dell Factory Image Restore. The Dell Factory Image Restore welcome screen appears.

  Note: Depending on your configuration, you may need to select Dell, then Dell Factory Image Restore factory tools.

  7. click on next. Data delete screen is displayed.

  Note: If you do not wish to continue Factory Image Restore, click Cancel.

  8. check the box to confirm that you want to continue reformatting the hard drive and restoring the system software to the factory condition, then click Next.  The restore process begins and may take five or more minutes. A message appears when the operating system and the applications installed in the factory have been restored to the State of the plant.

  9. click Finish to restart the system.

• Problem with anchor points, shifts vertically in the browser view. What is the problem?

  Problem with anchor points, shifts vertically in the browser view. What is the problem?

  have you allowed for the height of your head? I had to put my anchor above my content by the height of the header, otherwise, the upper part of my content was hidden behind the header

• One of my pages in the plan view is gray and has a white triangle on the corner - what does that mean?

  One of my pages in the plan view is gray and has a white triangle on the corner - what does that mean?

  

  Hi, this means that this page is not to be exported when publish you your site. Check and make a right click Export... and change it if you need))

• When I saw the page in the browser, why is it grey padding and how do I get rid of him?

  

  Why the image is not from edge to edge? Sorry if silly question, I'm new to dream.

  Thank you.

  lay - if you would like the image to fill the space around the content of the page, set the browser on a picture fill, then set it to Stretch Fill fitting. If you want that image to span width, to create a rectangle of width 100% and set the padding on an image in the same way. You can also set a framework for image at 100%.

  

  100% width icon.