Help please! Tried 5 contact with DELL BRAZIL! In case of failure!

Similar Questions

• Help, please! Lost contacts.

  Somehow in the past few days I lost some of my contacts that I have / text of the call all the time.

  I tried to restart taking the sim card and the battery several times and lost contacts have not been restored.

  I went to my GMail account to see if the contacts were in this list and they weren't which was also strange.

  Help, please!

  When you view your google contacts, there is more then one place to look - on pc - category wise.

  New contacts appear to be under 'other contacts' at the bottom of the list on the left and not under "my contacts".

• Help, please! Memory increases with Scripture PDM

  Hello guys,.
  I use a TDMS file to store the data of 16 accelerometers sampled 10KS/dry, you can therefore imagine the size of the files are going to be huge (more than 10 GB for 2 h or more registration).
  I want to be able to save a subset of the PDM file, or even the complete file to another file PDM. I'll have no problem writing in the file when you read of accelerometers.

  When trying to read the TDMS file and write a new, I'll have a lot of memory problems, so I read pieces of 5000 samples within a certain time the strand and then writing to the file.
  I have included the code.

  the code is attached. Please help as I was stuck with this memory problem for more than a week now!

  Kind regards
  Simon

  I don't think that opening and closing of the case will make a difference.
  Have you defragged the original TDMS file?
  And I think that you can read in segments of 10 MB without problem.
  Why you put away the time anyway, your waveform will be information in real-time.

  Tone

• Help please my iPad crashing with lines to the bottom of the screen can only help me

  Please help my iPad keeps crashing with lines running down the screen.

  Restore factory settings: use iTunes to restore your device iOS to factory settings

  If it does not help there is material damage

• NEED of HELP PLEASE :) - trying to install win7 on HP Pavilion G7 - cannot circumvent screen UEFI

  I have a laptop HP Pavilion G7.

  Hard disk - 500 GB Seagate SATA

  HP product ID - D1C31UA #ABA

  Here is what happened.

  replaced the screen cracked with new screen

  noticed laptop was suspended at startup and just kept turning it back on.

  took out RAM, dvd rom and battery then put them all back in... Still the problem persists.

  removed the hard drive and backed up all the important files.

  No disk recovery Win8 available - No Win 8 Installation Disc available

  Hard formatted using PC with the laptop connected via jumper USB hard drive.

  Formatted all Partitions

  re-installed a hard drive formatted in laptop

  Win 7 Installation disc on DVD Rom

  laptop kicked

  Consultation: BIOS

  Active LEGACY support

  Back of CD/DVD-ROM first in the initialization of the list of commands

  F10 to save and exit

  Enter 4 digit Code go to confirm the BIOS change

  Restarting the laptop

  UEFI starts again automatically at STARTUP

  the display shows prepare auto repair and diagnose your PC... stops and starts all over again...

  the display shows prepare auto repair and diagnose your PC... stops and starts again

  the display shows prepare auto repair and diagnose your PC... stops and starts all over again...

  How can I disable UEFI so that I can boot from the CD/DVD-Rom to install windows 7?

  Help, please.

  Thank you

  could not initially install Win7 - problem found and solved.

  BAD CD/DVD-ROM

• Help, please! black screen with blinking cursor...

  my screen said to check the file system on D the type of file system is NTFS volume lable in recovery, one of your disks needs to be checked for consistency.  You can cancel the disk check, but it is strongly recommended that you continue. Window to check the disk, then there a blue screen that says it was shut down to avoid damage and that a crucial thread in the system operation is released or terminated and to check the hardware or software that can be installed properly, then he did a crashdump and completed it. then he went to a black screen with a cursor of Charlotte on top and that's all he does now when I turn on the right after Gateway logo, he goes to this black screen with blinking cursor. What anddo which has happened, I hope or is this a lost cause? Help, please!

  Hello

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

• BlackBerry Smartphones HELP Please need to contact as soon as POSSIBLE!

  I got two blackberry curves, one was my staff and the other was to my job. I keep one of my sync with my office work, but would make backups for my personal phone in a file on the computer. My phone was stolen this weekend and I need to pull the contacts and place them on my work phone. However, when I use the Desktop Manager, it does me not the opportunity to move the pins (as it would usually once I connect one of the devices was) my personal telephone files are all saved to the RPI but I can't open. Please can anyone provide assistance as I have no information from family and friends until I can get back my last backup file of my personal phone. I tried to open the Office Assistant in device manager and switch, but he acknowledges that my work phone device.

  On your work, open the address book and click Menu > General Options and Options. Do you not see the choice it for Syncrozination wireless? Turn that off and then return to connect to the USB and the Office Manager.

  Click Restore > advanced > and on the left pane, you will see file > open and navigate to the most recent IPD backup file and move on.

  Once it reads the file, scroll down on the left side to treat the book data where it is highlighted. Press the arrow to the right in the center of the screen to move the data to the device.

• Airplane mode button does not. Any help, please? First time user dell.

  Hello

  I recently bought a dell inspiron 15 laptop computer series 7000. Its only for a month that I used it. Everything was fine, but my mode button (the button beside F12 and PrtScr well-functioning) plane has stopped working. Any help? All other buttons on the touch line is fully functional, so I'm afraid this isn't a problem of matrix keyboard?

  Please help me.

  Hi I got your issue, there is a button on your keyboard that resembles a wifi Tower press this button and it will allow you to disable flight mode, good luck my friend

• Cannot download apps - constantly says that cc has lost functionality I have re installed several times and used the cc cleaning tool - HELP please not very impressed with not be able to use a new customer applications!

  Hi all

  New customer to CC, cc said constantly that he lost the functionality and to re - install, I have done this several times and used the CC cleaning tool. What's the point of having CC if you cannot use this?

  Thanks for your reply, but I spent some time with support online yesterday which has managed to make me sort, I do not have a UPDATER AAM file, I could not delete the contents of the OOBE folder either, I had to rename the folder creative cloud. I was sent then the application manager - who was then updated to the new until I'm able to get apps. Long-term, but it worked. I tried the procedure you have above, just not all the steps worked for me. Thanks to the Member of the support staff who helped me, I have been literally pulling my hair out!

• Calc Help Please - Fix level 0 with numbers

  Hello
  
  In the hierarchy of our products, we have products of level 0 in the following Prd_1234567890 format and their parent may be Prd_Disks. My problem is that sometimes, the level 0 are deleted so that the parent becomes level 0 IE Prd_Disks, but I do want to add this member... only the Pd_ followed by digit so I tried this like below, but it doesn't seem to work.
  
  If (@Member (@Substring (@Name (@CURRMBR ('Products')), 3, 6)) < 999)
  
  I'm the * Error: 1200370 formula for [ProductSalesCalc] runtime error (line 0): attempt to cross a member function [@X] null * as I am against a member formula calculation.
  
  I thought I might be able to use the @match function, but I'm not sure what it takes to match with. Any help?
  
  Thank you
  
  Kaiser

  That's what I get when I run the Calc.

  FIX(Sales,Actual,Jan,@MBRCOMPARE("<=", "pd_9999999999", "Product"))
  "New York"=100;
  endfix
  

  New York actual sales
  Jan
  pd_0045421544 100
  pd_1234567890 100
  pd_balloons01 0
  pd_bottles 0
  pd_cans 0
  pd_9999999999 100
  pd_0000000000 100
  ProductsWithAll 0

  As you can see he is not picking up this member.

  Concerning

  Celvin
  http://www.orahyplabs.com

• Help, please! Annoying problem with trackpoint x 200!

  I have an x 200 with Win XP Pro. I had a driver for trackpoint uptodate (4.72) and everything worked fine - I was able to change its value in the properties of the mouse (tab TrackPoint). After that the windows update, trackpoint I just crazy. There is still a 4.72 driver installed - it can be seen in the mouse properties, tab TrackPoint is lost so the trackpoint works with the standard slow speed that windows gives to him and there is no advanced settings this tab gives TrackPoint! I noticed that tp4serv.exe, which is supposed to start than the TrackPoint tab is started when windows starts, but the TrackPoint tab isn't as I believe. I discovered that to start tab TrackPoint that I have to manually click tp4serv.exe. It is so frustrating "couse I have simply no idea what to do - I tried to reinstall the driver (it crashes), tried to return to the previous version of the driver, I installed all the updates for the update of the system updates installed Windows - still the same." I also tried to tp4serv.exe in startup - no results... I noticed some messages on the internet from people with the same problem, but with no result... Do you have any suggestions what to do?

  EDIT: For any future reference - I managed to fix it: I first fully update windows and NET framework 4.0. That I got rid the trackpoint drivers on (had to remove in the boot menu first to uninstall it without freezing system)-result 4.72 driver has been replaced by the slow, ordinary windows without the Properties tab TrackPoint driver. I have that restarted, updated the driver in the properties of the mouse - I have not installed the latest driver Lenovo 4.72, welcomed bu7 Windows Update the driver to connect to windows update (4.64 driver). Then restarted and now everything works fine - I have my TrackPoint tab at the back of the mouse properties and can adjust the speed of the trackpoint once more!

  Thanks for posting your solution might help someone else.

• Help please - at wits end with repeatable subform.

  I know it should be easy and basic, but after about 20 hours, I still don't know what I'm doing wrong.

  I want just one button to add another subform that contains the fields that must be met.

  It is a sign of the event in the journal I want to distribute iPads.  It has some user details then they would click on submit and it would add the subform to the next participant to complete.

  Thank you much, long in advance, for your help.

  http://www.gatorserver1.com/links/SIS-LC-v17.PDF

  I ' watched ved your form and cannot begin to understand the coding you for the add section button (you're away from me), but I can make it work with a simple script.

  1. your subform must be sent.

  2. you define the information in "repeat subform for each data element" in the binding tab

  3. I added a blank space at the bottom of the subform flowed in the Layout tab to make a full page

  4. place the button in the subform flowed

  5. use this script ' Form1.Page1.AttendeeSubform.instanceManager.addInstance (1); "in the click event

  6 examine the properties and make sure that the version "run as" is compatible with what you're doing

  7. save the form a dynamic not a static

  I hope this helps.

• Message received from "Disk full" so he was trying to install 2011.exe SRIM. I can see 933 GB of free space when I display the properties of the operating system (c :)) help, please!

  Original title: received message 'disk full '. I can see 933 GB of free space when I display the properties of the operating system (c :)) help, please!

  New computer - Dell Inc. 05DN3X (CPU 1), MS Windows 7 64-bit SP1, processor Intel Core i7 930 at 2.80 GHz, 6.00 GB Triple - Channel DDR3 @ 666 MHz, 977 GB Western Digital WDC WD10EALX - 759BA1 (SATA).

  Problem:
  Downloaded a program (32 MB) (SRIM 2011.exe) commonly used to work and tried to extract it to a new folder on the OS (C :) - received message 'disk full'.) I can see 933GB free space when I discover the properties of the operating system (c) - Quota is turned off.

  Have used the program mentioned above (SRIM.exe) several times before using different operating systems XP to work without problem...

  Help, please!

  THX

  Given that this was written in 2011, I'm sure you understood something at this stage. However, the post also has much a views, so I think it might be a persistent problem, so I'll post my solution:

  When I copied the file SRIM - 20xx.e in a folder of SRIM-20xx under Program Files, I had a "Disk full" error when trying to extract the files, even though I had a lot of space on my hard drive and without limits. After a bit of messing around, I like the solution is to move the SRIM-20xx folder on the desktop, and then unpack it. After extraction, which leaves you with a lot of seemingly useless files, double-click CONFIGURATION and the installation will begin appropriate. Installation will create a file under Program Files, there will be no need to make things happen later, simply remove the meantime extract the folder to your desktop computer.

• I want to reset my security question I forgot the answers? BUT I don't see any options, when I try to reset, saying "reset the security questions? Help, please

  I tried to change my security questions that I forgot my answers, but I don't see any option to reset security issues?

  Need help please, I'm stuck with this?

  Will be appreciated if helped.

  Thank you

  SKLB

  Look at this article. In my view, that information can help you. If you forgot your Apple ID - Apple Support security questions answered

• Error 0 x 80070079 windows 7 x 64 win7 - when you try to copy large files to USB. The semaphore timeout period has expired. Help, please!

  Any file larger and begins to copy and Quen stops about 95 to 98% before its finshed. This is some time and comes back with an error 0 x 80070079: the semaphore timeout period has expired. If I boot in safe mode, I get the same thing. I applied http://support.microsoft.com/kb/976972 and it did not help me. Help, please!

  I have Dell XPS9000, Win7 Premium, x 64, I7/920, Nvidia 260, 12 GB of RAM

  Hello

  Thanks for the reply Thahaseena. I think a lot of people have the same problem and it's partially the fault of Microsoft. It is the solution of the problem that works for most people if the heart of the problem is corrupt USB driver (s). The USB driver might get damaged due to defective USB device. This was my case. I bought the 16 GB Sandisk USB which has serious problems. It seems that it is real default, rather than fake. However, I am still investigating.

  This is what happens:

  -Start the copy of the file and at one point gets stuck. After all, you get that infamous error 0 x 80070079. If you try to shoot this defective USB before the error pops out, it's really dangerous abduction of USB that could cause corruption of the driver for the USB controller. This happened to me. So, after this point, none of the USB devices will be capable of the greatest copy files 1 GB +, because my USB drivers are now corrupt and and the transfer is slower. Fast devices and more small files work great, but if you have low speed USB 2.0 device it will not be able to complete the transfer of files at one time and you will receive the error.

  Solution:

  -Stop using the defective device to avoid a repetition of the problem (if you know who is defective). If you do not know, must be eliminated one by one.

  -Disconnect all USB cables except the keyboard cable (at least that is not based USB)

  -Use tabs and the arrows on the keyboard to get to Device Manager

  -Remove all usb drivers, including the one that is connected to the keyboard

  -You may need to force the closure - the dawn of the computer.

  -Do not turn on computer. Get on your knees and unplug the power cord. If you forget this step, the process of booth PC will load faulty driver again. (faulty or bad it depends on the scenario)

  -By unplugging the power cord and let it stay for at least 5 minutes, you force your PC to renegotiate the devices and drivers

  -Connect all USB cables

  -Check the usb status icon in the status bar. Sometimes, you may need to restart the computer if windows asks you to do. Restart the computer if you are not sure what I'm talking about.

  - and... Here we are. Bingo!

  Now, if you plug the faulty device once again, you will need to repeat the process. However, in my case I return to the seller or the manufacturer for repair. You can use this procedure to force the outcrop of USB drivers. That's why I say I blame partially Microsoft for that matter because there is no utility or command available to force this action automatically do that when the problem occurs. This could potentially help people with the question when a few USB ports stop working if its pilots involved.

  If it worked for you, please press useful Votes.

  Thank you.

  Ntongo