Help please - at wits end with repeatable subform.

Similar Questions

• Help, please! black screen with blinking cursor...

  my screen said to check the file system on D the type of file system is NTFS volume lable in recovery, one of your disks needs to be checked for consistency.  You can cancel the disk check, but it is strongly recommended that you continue. Window to check the disk, then there a blue screen that says it was shut down to avoid damage and that a crucial thread in the system operation is released or terminated and to check the hardware or software that can be installed properly, then he did a crashdump and completed it. then he went to a black screen with a cursor of Charlotte on top and that's all he does now when I turn on the right after Gateway logo, he goes to this black screen with blinking cursor. What anddo which has happened, I hope or is this a lost cause? Help, please!

  Hello

  No saving necessary data and re-installing Windows Vista might be the best option, but here
  are a few others.

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  A method to try to get to the desktop (try in normal Windows Mode without failure) is CTRL +.
  ALT + DELETE - Manager tasks and tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - and then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is available by
  repeatedly tapping F8 as you start. CTRL + SHIFT + ESC also begins the Task Manager.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you don't have the disks your
  system manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (making the system restore it)
  must be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Be sure to do a good backup or three.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (a line type or copy and paste one line at a time and hit enter - enter a bracket)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)

  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

• Delete the blank page with repeated subforms

  Hi all!

  I have a form for the statements.

  Each statement must be set on a new page.

  I solved this with a repeating subform.

  And in the repeated subform properties variable "After" a "go to the next Page.

  This works well with only one drawback. In the end, an empty page is also be created.

  I would like to get rid of this blank page.

  But how is that possible?

  Kind regards

  Anton Pierhagen

  (1) select your repeating subform and add a conditional Break (object > paging > Edit...).

  (2) enter this script: this.instanceManager.count > this.instanceIndex + 1

  (3) select Pause: after and to: top of Page

  4) click OK

  Kyle

• Record of. PDF with repeatable subforms adds a new Instance.

  Hey everybody,

  I have worked with dynamic forms LiveCycle Desinger for a few years now, and this is the first time I see this kind of behavior.

  I have a very big form in LiveCycle Designer. There or 50 subform repeatable sections. I save the designer, and then open it in Adobe Acrobat X Pro. Acrobat Pro, whenever I have re-record it then re-open, a new instance is added to each subform repeatable.

  If I fill it, save it, and then reopen it, he has all my info, as well as a subfrom empty additional below each section.

  I have no formcalc in the presave, nor do I have any global fields in my form... In addition, each single repeatable subform named. I am at a loss.

  I have a sample of this pdf here. If you have a different file hosting site you prefer, do let me know.

  I'd appreciate any help anyone could offer. I don't know what is the cause.

  -Scott

  Hello again everyone,

  I found the answer to my problem. I had a devil of a time from Googling the problem, so I'll put some sentences that I tried below, where like-minded individuals has a similar problem.

  The main problem was with data binding. I had left the data binding for all as the default 'using the name (...) '. I was under the impression that as long as the sibling elements have been appointed to the same thing, there is a conflict. I was wrong.

  In my form, I used static subforms to organize the fields available in a dynamic repeatable subform. The static subform called "sf_positioning". It happens that this field has an uncle named the same thing. It was close enough to provoke a conflict, making the repeatable subform record an additional instance whenever the data has been saved. This can be corrected in one of two directions... ((1) set one of the subforms wrongful use "no data binding" (use this only if the content of the subform is not be exported or merged) or 2) give the subforms of unique names.

  I need to look if everything must be particularly well appointed... As I said, it makes more sense to me that the only restriction should have been on the sibling elements, but I will in the future to make sure there are at least three degrees of separation between just like named controls/subforms.

  Hope that helps someone else...

  And what follows is some of my attempts at Googling the problem. I hope that this will facilitate the solution to find for others:

  -Player which extends shape Dynamics breeze repeating subforms.

  -Economy adds a new instance of the repeatable subform.

  -Whenever I save, I get more empty instances of a subform repeatable.

  -Repeatable subforms not working does not go as planned.

• Help please my iPad crashing with lines to the bottom of the screen can only help me

  Please help my iPad keeps crashing with lines running down the screen.

  Restore factory settings: use iTunes to restore your device iOS to factory settings

  If it does not help there is material damage

• Help, please! Memory increases with Scripture PDM

  Hello guys,.
  I use a TDMS file to store the data of 16 accelerometers sampled 10KS/dry, you can therefore imagine the size of the files are going to be huge (more than 10 GB for 2 h or more registration).
  I want to be able to save a subset of the PDM file, or even the complete file to another file PDM. I'll have no problem writing in the file when you read of accelerometers.

  When trying to read the TDMS file and write a new, I'll have a lot of memory problems, so I read pieces of 5000 samples within a certain time the strand and then writing to the file.
  I have included the code.

  the code is attached. Please help as I was stuck with this memory problem for more than a week now!

  Kind regards
  Simon

  I don't think that opening and closing of the case will make a difference.
  Have you defragged the original TDMS file?
  And I think that you can read in segments of 10 MB without problem.
  Why you put away the time anyway, your waveform will be information in real-time.

  Tone

• At my wits end with lightroom performance

  Hi guys,.

  When I moved to medium format about a year ago I built a PC in order to satisfy the larger files. It's a beast of speed. Very briefly;

  -quad core i7 - 6700 k to 4.5 ghz

  -32 GB DDR4 3200 mhz

  -Boot disk is a disk of ssd samsung sm951 m2 (2 100 Mbps)

  -My pending changes / raws are on partition raid0 to 2 x 1 TB of ssd drives from samsung 1 TB, landmarks to approximately 900 MB/s

  -Video card is a 980ti.

  -screen 32 "4 k

  -Win10 pro

  Everything on the PC works blazing fast including photoshop.

  Lightroom is painful to use. Importing files is fast enough, but then everything that follows is so lag, switching between photos, move from grid to develop mode and vice versa, all train to the point of frustration.

  I have my catalogs stored on drive ssd startup m2. I tried everything I can find online, even by putting on the m2 drive raws or vice versa, put them on normal SSDS. I uninstalled and reinstalled. I turned gpu support power.

  Can anyone help. I just can't think of anything. It is difficult to solve that LR is the only program that. If I wasn't using LR, I would say it is a speed freak.

  Thanks in advance

  Please read this:

  Lightroom: Slow performance on the Xeon processors | Community customer Photoshop family

  (The title is wrong; it is not only a problem with XEON, but with machines high range)

  Click on 'me' also if you agree.

  I think your problem is the same.

• Cannot download apps - constantly says that cc has lost functionality I have re installed several times and used the cc cleaning tool - HELP please not very impressed with not be able to use a new customer applications!

  Hi all

  New customer to CC, cc said constantly that he lost the functionality and to re - install, I have done this several times and used the CC cleaning tool. What's the point of having CC if you cannot use this?

  Thanks for your reply, but I spent some time with support online yesterday which has managed to make me sort, I do not have a UPDATER AAM file, I could not delete the contents of the OOBE folder either, I had to rename the folder creative cloud. I was sent then the application manager - who was then updated to the new until I'm able to get apps. Long-term, but it worked. I tried the procedure you have above, just not all the steps worked for me. Thanks to the Member of the support staff who helped me, I have been literally pulling my hair out!

• Calc Help Please - Fix level 0 with numbers

  Hello
  
  In the hierarchy of our products, we have products of level 0 in the following Prd_1234567890 format and their parent may be Prd_Disks. My problem is that sometimes, the level 0 are deleted so that the parent becomes level 0 IE Prd_Disks, but I do want to add this member... only the Pd_ followed by digit so I tried this like below, but it doesn't seem to work.
  
  If (@Member (@Substring (@Name (@CURRMBR ('Products')), 3, 6)) < 999)
  
  I'm the * Error: 1200370 formula for [ProductSalesCalc] runtime error (line 0): attempt to cross a member function [@X] null * as I am against a member formula calculation.
  
  I thought I might be able to use the @match function, but I'm not sure what it takes to match with. Any help?
  
  Thank you
  
  Kaiser

  That's what I get when I run the Calc.

  FIX(Sales,Actual,Jan,@MBRCOMPARE("<=", "pd_9999999999", "Product"))
  "New York"=100;
  endfix
  

  New York actual sales
  Jan
  pd_0045421544 100
  pd_1234567890 100
  pd_balloons01 0
  pd_bottles 0
  pd_cans 0
  pd_9999999999 100
  pd_0000000000 100
  ProductsWithAll 0

  As you can see he is not picking up this member.

  Concerning

  Celvin
  http://www.orahyplabs.com

• Help, please! Annoying problem with trackpoint x 200!

  I have an x 200 with Win XP Pro. I had a driver for trackpoint uptodate (4.72) and everything worked fine - I was able to change its value in the properties of the mouse (tab TrackPoint). After that the windows update, trackpoint I just crazy. There is still a 4.72 driver installed - it can be seen in the mouse properties, tab TrackPoint is lost so the trackpoint works with the standard slow speed that windows gives to him and there is no advanced settings this tab gives TrackPoint! I noticed that tp4serv.exe, which is supposed to start than the TrackPoint tab is started when windows starts, but the TrackPoint tab isn't as I believe. I discovered that to start tab TrackPoint that I have to manually click tp4serv.exe. It is so frustrating "couse I have simply no idea what to do - I tried to reinstall the driver (it crashes), tried to return to the previous version of the driver, I installed all the updates for the update of the system updates installed Windows - still the same." I also tried to tp4serv.exe in startup - no results... I noticed some messages on the internet from people with the same problem, but with no result... Do you have any suggestions what to do?

  EDIT: For any future reference - I managed to fix it: I first fully update windows and NET framework 4.0. That I got rid the trackpoint drivers on (had to remove in the boot menu first to uninstall it without freezing system)-result 4.72 driver has been replaced by the slow, ordinary windows without the Properties tab TrackPoint driver. I have that restarted, updated the driver in the properties of the mouse - I have not installed the latest driver Lenovo 4.72, welcomed bu7 Windows Update the driver to connect to windows update (4.64 driver). Then restarted and now everything works fine - I have my TrackPoint tab at the back of the mouse properties and can adjust the speed of the trackpoint once more!

  Thanks for posting your solution might help someone else.

• I'm at my wits end with Muse' sensitive layout

  I'm having the WORST time with the new sensitive provision. I have a footer that looks very much like breakpoints in the Muse. However, when I view it in the browser, it's a mess. It cannot be that hard. What I am doing wrong? I'm not new to Muse and have been using it day 1. So I'm not a novice.

  See http://ipoponline.com/misc/test2/

  To download the files from muse see: http://ipoponline.com/misc/test2/test2.zip

  This value of 320 is not a real breakpoint but the minimum size. So less than that, just become static and fall on the page. That would be the little switch explaining all this?

• BlackBerry Smartphones SMS full Notification - help please

  I'm at my wits end with my Blackberry Torch 9810.  I have very little text messages in my Inbox, I lost the lot for some reason my phone has decided to change some date & in the future and trying to resolve that, in my opinion, I wiped everything, do not know what I did a few weeks ago, but they disappeared.

  Now I get notifications that my SMS Inbox is full and I need to delete messages.  Can someone help me I have a lot of messages on the handset and cannot believe it is complete unless there is an option I need to select/deselect.  The user guide is useless.

  I changed a parameter in the past as text messages seem to be endangered if they were in a month or so old, but all that I did I can't and don't know how to handle all my text messages myself.  My old iphone allowed me to keep the text as long messages I wanted with what appeared to be a very large storage area, now I just want to throw this thing in the bin.  Unfortunately I have 18 months remaining on my contract (business) so I can do nothing about it.

  Ann3da wrote:

  50 SMS Messages / 29.5 K

  15 text messages / 12.3 K

  OK, not a lot of people very little. It is in memory of the device, but you are some of the SIM card, save too much.

  Then... you must change this setting according to the instructions below.

  Article ID: KB13465 "SIM card is full please delete SMS messages" appears on the BlackBerry smartphone

• Do some required fields in a repeating subform - verified/validated on preSubmit

  I have a form that contains a repeating subform - sense, there is only one subform (Western flowed) with binding set to repeat a 1 Min and Max of 15 (subform extensible so dynamic).

  In the subform are 5 fields (example below):

  First name

  Family name

  Email address

  Age

  Sex (radio button for men and women)

  If the user enters a value for the first name, then the name, the age and the gender option button should become "necessary". Similarly, if the first name value is empty/null, then the fields first name, age and sex radio button should be optional.

  I understand that this can be achieved quite easily if the subform was not repeat:

  If (!) ((this.isNull))) {//if FirstName field is not null

  LastName.mandatory = 'error ';

  Age.Mandatory = 'error ';

  etc.

  }

  else {//if field is null

  LastName.mandatory = "disabled";

  Age.Mandatory = "disabled";

  etc.

  }

  However, how this is achieved in a repeating subform?  If the above script is placed in the repeating subform, it affects ALL repetitive lines in the subform group once rendering. Instead, I need the mandatory conditional status treated on a basis of single instance (online).

  Thanks in advance
  

  Hello

  I do not see a problem to make this work even with repeated subforms.

  Here's a sample for you.

  https://files.Acrobat.com/preview/7dc1e4aa-5160-4058-a59e-77b77dbf658f

  I hope this helps.

• I want to reset my security question I forgot the answers? BUT I don't see any options, when I try to reset, saying "reset the security questions? Help, please

  I tried to change my security questions that I forgot my answers, but I don't see any option to reset security issues?

  Need help please, I'm stuck with this?

  Will be appreciated if helped.

  Thank you

  SKLB

  Look at this article. In my view, that information can help you. If you forgot your Apple ID - Apple Support security questions answered

• My lightroom says that my trial has expired, but I have never had a trial. I bought Lightroom 6 (CD version only, office) and installed on my computer. Now I can't import pictures and it'e telling me my trial happened to expire. Help, please.

  My lightroom says that my trial has expired, but I have never had a trial. I bought Lightroom 6 (CD version only, office) and installed on my computer. Now I can't import pictures and it'e telling me my trial happened to expire. Help, please.

  License with the serial number of the disk, which is usually inside the box.

  https://helpx.Adobe.com/Lightroom/KB/serialize-Lightroom-CC-trial-to-activate-as-Lightroom - 6.html