NEED of HELP PLEASE :) - trying to install win7 on HP Pavilion G7 - cannot circumvent screen UEFI
I have a laptop HP Pavilion G7.
Hard disk - 500 GB Seagate SATA
HP product ID - D1C31UA #ABA
Here is what happened.
replaced the screen cracked with new screen
noticed laptop was suspended at startup and just kept turning it back on.
took out RAM, dvd rom and battery then put them all back in... Still the problem persists.
removed the hard drive and backed up all the important files.
No disk recovery Win8 available - No Win 8 Installation Disc available
Hard formatted using PC with the laptop connected via jumper USB hard drive.
Formatted all Partitions
re-installed a hard drive formatted in laptop
Win 7 Installation disc on DVD Rom
laptop kicked
Consultation: BIOS
Active LEGACY support
Back of CD/DVD-ROM first in the initialization of the list of commands
F10 to save and exit
Enter 4 digit Code go to confirm the BIOS change
Restarting the laptop
UEFI starts again automatically at STARTUP
the display shows prepare auto repair and diagnose your PC... stops and starts all over again...
the display shows prepare auto repair and diagnose your PC... stops and starts again
the display shows prepare auto repair and diagnose your PC... stops and starts all over again...
How can I disable UEFI so that I can boot from the CD/DVD-Rom to install windows 7?
Help, please.
Thank you
could not initially install Win7 - problem found and solved.
BAD CD/DVD-ROM
Tags: Notebooks
Similar Questions
-
Yester night I tried to improve my S5 iphone for a new virsion so at the end he asked me my icloud and the password I remember my password but not my icloud so I need your help please.
Seems that Apple has temporary problems with their activation servers. Many users report similar problem on older devices.
Latest news: If you can not activate your iPhone, iPad, or iPod touch after installing iOS 9.3 - Apple Support
Hoppefully Apple will highlight the top soon.
-
I have a laptop HP550 with a duo Core 1.8, I tried to install win7 64 bit
I have a laptop HP550 with a duo Core 1.8, I tried to install win7 64 bit. My question is this...
"My laptop HP550 with a 1.8 bicoeur processor will accept A Windows 7 64 bit operating system or should I stay with a 32-bit operating system." Any help will be greatly appreciated
Yes, you will be able to run Windows 7 64 bit on this system, but it may not be quick.
-Your processor supports 64-bit.
-2 GB or more of RAM is recommended for the 64-bit version of Windows.Check your.
You need to install Windows 7 64 bit only if you have a reason behind choosing him over 32 bits. Personally, I would recommend that you use the 32-bit Windows.
-
I need serious help please... We do translations of textbooks, I searched an excessive type function but have been unable to find, we are working in indesign CS 5. It takes allot of time to delete the text and type in the new language.
Argh it's frustrating! I never noticed that the key was not working in InDesign.
A bit of research and it turns out that the MS Office has this as an option in their software. But I can't find an option in the InDesign preferences to make it work.
However, somethings do not appear in the shortcuts and preferences and are hidden triggers in InDesign that are accessible via a script.
I'm not saying that it is possible to activate the button insert by using a script, but it is plausible that he can be activated.
Maybe ask on the forum script? Scripting InDesign
I know that this may be a possibility as with InDesign prior to export PDF documents interactive versions, there was previously no way to export PDFs interactive as unique pages if the gaps of.
But the option to toggle this setting was scriptable.
-
BSOD when trying to install Win7 64 bit with the new motherboard
Hi all
I have the following BSOD problem:
I installed a new motherboard in my system (a MSI P43 C51). Before that, I got a Gigabyte G41MT-S2P. The rest of the configuration is: Q9650, Thermaltake truespirit 90 cooler, 2 x 4 GB DDR3 1333, GTX 470, 750W PSU, case name, SATA HDD 500 GB, Windows 7 64 bit.Well, the problem started when I tried to boot into windows with the new motherboard: I got BSOD 1 second after windows starts loading. I thought... new motherboard, install new windows, so I tried to install windows 7 64 bit DVD and USB stick, I get the STOP: 0x0000000A error during installation. I changed the HARD drive, thinking that it could be a bad sector problem, but no, the other hard drive behaved exactly the same thing. I got BSOD at 40% extraction, extraction of 90% and for the moment "Complete the installation..." ». I also tried to install with the stick of memory only one, spent between ports, everything. The material I have works, as I played on my PC every day in the last month and received no. BSOD, also had a small overclock the CPU and the GPU (100 MHz on the processor, that the old motherboard supported more than 343 fsb and about 100 MHz on the GPU). It was stable, no errors, no nothing.
My thoughts are only, after asking some knowledge that work in computer support, it could be a problem of version of the BIOS (BIOS is 2005..) and the fact that my Win 7 installation kit is without Service Pack 1 (a colleague told me that he had this problem for the PC more than once and after trying to install SP1 It went smoothly and without errors)
I just got a new "blank" DVD of Win 7 64 bit with SP1. What I'll try today is to Flash the bios with the latest version and install the OS on a HARD drive new, sealed. He could not be my system components, because they are compatible and they worked 1 day before with no problems! I have literally NO IDEA what could be the problem. Today, I'll try the installation of the new DVD and with the new version of the BIOS. If this does not work, I have no idea what I can do... It is a sucky situation.
If you have any suggestions, please, don't keep it to yourself :-D
Thank you!
AlexHello
See this thread for more information on using BlueScreenView, MyEventViewer and other methods of
Troubleshoot the BlueScreens - top two responses.==============================================
References to Vista also apply to Windows 7.
just as likely to be the root cause that they can force a driver to corrupt or go out of bounds.
The video driver or something affecting it would be questionable.At the end of this message, I'll post a bluescreen generic and in the next convenience store
How do to update the drivers and BIOS but also to check memory message.-----------------------------------
BCCode: 0a 0x0000000A
Cause
This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.
The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.
If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.
Solve the problem
If a kernel debugger is available, get a stack trace.
To resolve an error caused by the faulty device driver or service system, BIOS
- Restart your computer.
- Press F8 to character-based menu that displays the choice of operating system.
- In the WindowsAdvanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.
To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool
- Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
- Try disabling the cache in memory of the BIOS.
- Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
- Make sure that the latest Service Pack is installed.
- If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
- For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.
If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.
Comments
Before upgrading to a new version of Windows, remove all third-party device drivers and system services and disable any antivirus. Contact software manufacturers for updates of these third-party tools.
BCCode: 0a 0x0000000A<-- read="">-->
* 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-==================================================================
General troubleshooting BlueScreen to use with the methods above.
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
http://www.winvistatips.com/disable-automatic-restart-T84.html-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlYou can try a system restore to a point before the problem started when one exists.
How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates cbs.log Windows Vista (and Windows 7)
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers to 7 (update drivers manually using the methods above is preferred
to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
Startup Options recovery or Windows 7 disk repair
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.htmlHow to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlHow to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlI hope this helps.
-
Help please will not install flash.
Hi tried all day to install flash on my first macbook. Tried everything. uninstalled, firewall is disabled, safari plug-ins enabled. Any help please?
Thanks to Mike M from your post in October 2013. Follow-up and it worked the first time. What a waste of a day.
-
Trying to install win7 on new asus x550c guard freezing
I just got a new x550c from asus and when I got there the first thing I tried was installing my new win7 on it to replace the win8 with that he came. He gets to the part where four colored balls make up the winning logo and he says: "starting windows" and then it just freezes. I can't go past that and I don't know what to do.
It turns out that the question was how the drive has been formatted. Got it up and current.
-
REPEATED YEAR ERROR A RED X and pointing to the prob-the source is when I played ' cv.d. + when I chose to open dectsron files wth either W "S MEDIAM PLAYER, INTERNET EXPLORER, or WITH A DIFFERENT PLAYER 'CLASSIC', I THINK! "SO, WHEN THE ASSISTANCE OF W / CLICKING ON. MEDIA PLAYER "-AN ERROR REPEATEA"
DLY? -J' USES THE LATEST VERSION OF MOZILLA FIREFOX as MY WEB BROWSER... LALSO WHEN IVE DOWNLOADED MUSIC FROM 'YOUTUBE' IN YO A PLAYLIST IN THE LIBRARY, TURN OFF LAPTOP + BACK TO FINISH BUT 'PROPERTIES' ALONG ALL THE TRACKS DISAPPEARED + ' WAS A 'WASTE OF TIME "!" YES A GOOD PER. S WIDE, DO YOU KNOW WHAT I HAVE WAY? ISN'T ENOUGH HOURS WITHOUT THIS "APPENING"! ". ANY ONE OUT THERE WHO THINKS THEY CAN AVE a CE would BE "APPRECIATED:, WITHOUT END, I look FORWARD WITH HOPE, Justin,Hello Justin,
Thanks for posting your question on the Microsoft community.
We need more information about the issue so that we can help you better.
What is the exact error message when you say: "YEAR ERROR REPEATEADLY?
Thank you for details on the issue.
This problem may occur because of the incorrect or damaged Windows media player settings.
I suggest you run Windows media player convenience store settings and check.
Reference:
Open the troubleshooting Windows Media Player settings Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-TroubleshooterThis utility checks the configuration and network for Windows Media Player settings to make sure you can read the content that you have downloaded and saved on your computer, or content streaming over a network or the
Internet.
Please also read this article and check.
Burn a CD or DVD in Windows Media Player
http://Windows.Microsoft.com/en-us/Windows/burn-CD-DVD-Media-Player#1TC=Windows-7I hope this information helps.
Please let us know if you need more help.
Thank you
-
Je am a customer Subscriber to Adobe Creative cloud for a while. I have problems. This month they do not have decision-making my driver's license. All the programs have been Update test version. I need to your emergency help please
Hello Mara,
If you are facing lawsuits error on CC2015, please see the help document:
https://helpx.Adobe.com/manage-account-membership/CC-reverts-to-trial.html
Kind regards
Sheena
-
For iOS MAC, firefox launches adobe in another browser instead of launching within mozilla. Help, please. I have to perform several tasks due. I have worked on these 2 days and can not find the merry...
Figured out. Here is the solution. Put Firefox in 32-bit mode. Select the adobe Plugin NPAPI drive. delete all cookies, history, restart firefox and voila. Woohooooooooooooo...
-
Re: Trying to install Win7 on Satellite L350D
Hi guys
I have a Toshiba Satellite L350D and I try to install the Windows7 again questioned the screen went black, I decided to format and reinstall everything, but when finishes the installation of the laptop restarts, but the screen continues black :(
Any clews?
Can I make an update of the BIOS without a PC and this should it fix my problem?
Best regards
Luis
Hello
Are you trying to install the Os using a recovery disk or windows disk copy?
-
WIFI does not work after installing WIN7 to HP Pavilion DV1000
I hope you can help! After the complete collapse of the old WinXp I installed Win7 - mostly away from the ti works. However, WIFI does not work. (P/N is PY869PA #ABG, he also says dv1303ap on the label)
Is there a driver for the available WLAN? Witout WLAn or internet access good old HP is pretty useless...
Hi, Andreas:
Here's what you need to do to get this old Intel Pro 2200 card to work with W7...
Download the zip version of the driver from the link below. The first file listed.
Unzip it into a folder.
Go to Device Manager and click on the network controller needing drivers.
Click the driver tab. Click on set to update driver.
Select her browse my computer for driver software method and navigate to the driver folder, that you unzipped.
Make sure that the include subfolders is selected and the driver should install.
-
Dear professionals
I am trying to connect to connect to the server via the Client view Horizon but when I enter the IP of the server connection I got the error message indicating that
connection to the server was not a valid license key (see attached photo)
everything has been installed and configured correctly, I added the vcenter Server view Portal administrator and I also added new swimming pool inside
See administrator portal, but I don't have the login server license key.
should I really buy the connection to the license key server? is there any version of the elevation of the connection to the server?
Please help me
Thank you
naoufl
Yes you need a license key to use the view of the Horizon, there is a 60-day evaluation license if you register here:
-
Hello
Please grant my tale as it is imperative it is resolved.
I was enjoying a Sunday idleness the couch this afternoon when my sister approached and informed me of our unexpected arrival of mothers. The witch at the door greeting she busts in and happily informs me that his "nothing bad" I Breathed relief. Me handing his new phone, she exclaims "its been all your * on that." I can't go down. " I have a glance and she shows me this message I forgot that I had done with some password I thought brilliant at the time where two years ago. I lived with her and I turned off my nut like a serious amount of time then and I had jumped on his computer and updated my * to icloud, creating a new email I forgot soon after because he had been a night and lost my Iphone. I couldn't even remember that I argued my * up there. Laughing out loud. I'm a ********.
So I just moved on, I already had another phone that I was using but I liked the iphone for the pictures taken so it kept running for this and games. then it is stolen, I move on to LG and Samsung.
So with MOM just now updated her phone, she comes to me and so I find my password and deleted all the contents of his phone is turned off.
Earlier, I think that "man I had some bad shots there and note" so I'm going to get down them Icloud and distributed his. ****!!
Please tell me that I can save all this some how. I am devistated to *.
It is developing something so lame and basic, but I can't write so simple things. I have to stop writing and this post. God I need friends haha
< published by host >
I asked the moderators to move this message to the iPhone chat room.
Looks like you have installed the phone your MOM using your iCloud account... or you set up your devices using its account iCloud.
-
UberSoldier (2006, for Windows XP sp2 or lower) game successfully installed on Windows7, but blocked driver incompatible. Burut creator and Publisher CDV using the StarForce Protection drivers, so I asked the producer for a compatible. They sent me sfdrvup.exe, but Windows7 found potentially dangerous access and blocked to that file. I can not start the game. Can someone help to solve this problem please? Thank you!
I can provide you with more information if necessary.
Hello
Check if the game is compatible with Windows 7:
http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx
Maybe you are looking for
-
("Not Responding") freezing when loading some Web pages
When loading certain pages Web firefox crashes for a while with "(ne répond pas) ' at the top next to the page, also bringing Windows 7 Aero affect the top of the window instead of being hidden." Perhaps this lasts ten seconds give or take most of th
-
More than six and still have not had a problem of fix from apple
I called apple more than six weeks bc my son's phone has been hacked and lost mode. It has never been fixed and they keep telling me that technical support deals with it. ! I pay over $ 100 for her phone and he has not used in six weeks. How is this
-
Qosmio X 770-n404 how to get enlightenment to stick IT in the Bios?
Just got a brand new Qosmio X 770 - n404 toshiba last week The words of the enlightened fine keyboard when turn onHowever when it is off, and lighting set in the BIOS on it, it will not stay on after windows startup I will go back to the Bios and it
-
G62X-400 (ld642av) does not load, power button ribbon cable could be damaged.
Laptop of the friend's daughter had a problem with the cable going to the LCD. When opening it I noticed a few missing screws of the machine near the back and the middle. I disassembled and made the display cable stressed I guess because the flex of
-
Well guys I have a table which gives me positive and negative values. I need to use this table and get 2 new tables, one is the array of positive values, the second is the table with negative values, after that I need to get 2 values of it, one is th