Help!  Re: Analytics Fianacial failed with error Code = 36331

Similar Questions

• Fianacial Analytics failed with error Code = 36331

  Hi all
  I run the execution plan for financial analytics EBS R12 and few tasks in this EP failed. When I try to debug them using the session log files, I could not find them. I mean, there is no session generated for these tasks failed newspapers! But, newspapers workflow does not give me clear reason, they had good reason for the failure. Is there another way, where I can get to debug these tasks...
  
  In the workflow log, I found «Error Code = 36331:Unknown error code reason 36331»
  When I gave a fresh search on this error, it sent me to a position where we must apply the patches EBF189068 and EBF191169. But in my case, I already have the EP was properly executed for EBS 11.5.10 version.
  But do not know if the patches have been applied or not, if not yet what I apply these patches?
  
  Someone please advise.

  I had no access to the administration console to look at the value of $PMSessionLogDir. However, I will try to get it and update you

  Please do.
  Have you checked the settings file to the location that I mentioned in my last post?

  However after taking another look at your journal for Wflw, I think you may have a problem with the connection:
  TM_6193 that an error has occurred during the expansion of the connection of database connection parameter name ORA_R12 for the variable of $DBConnection_OLTP database connection is not well defined. .

  Are you sure that you have access to your defined source DB? You specified settings for your execution Plan in DAC correctly?

  Please double check it!
  It could be that useful...
  Michal

• Update fails with error code 48 9.

  Original title: code9C48

  I get this update failed with... 9 ethical c 48... any information would be greatly appreciated... Thank you

  Hi TeresaReynolds,

  ·         Update fails with error code 9 48?

  ·         Are you facing this problem with a particular update or all updates?

  ·         Remember to make changes to the computer, after which the issue started?

  Try the following steps:

  Step 1:

  Temporarily disable the antivirus on the computer running software and check if it helps:

  Disable the anti-virus software

  Caution:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 2:

  Reset Windows components updates default and check to see if it helps:

  How to reset the Windows Update components?

  I hope this helps.

• Five of the six updates have been installed correctly, KB2698365 failed with error code 80070570. What should I do to install this important update

  Five of the six updates have been installed correctly, KB2698365 failed with error code 80070570. What should I do to install this important update successfully. I'm not a pc expert and don't have no knowledge will take it the word of experts from the pc. KB2698365 is 'important', so I tried to install it several times, but always failing with error code 80070570. I've been on a boring treasure hunt for to install this 'important' update, it seems to find no will to give helpful advice anywhere. I would appreciate help installation of this major update, and talk about normal advice, how to install it successfully without failure of the error code 80070570. What is the error code 80070570.? I use windows vista Home premium, service pack 2, 32-bit operating system. I'm using the essentials of security. Thank you for the consideration of this issue. NIC

  Hi, Grizzly7659,

  Follow the instructions given by Taurian & guenoun

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/error-code-80070570/a2df7d06-BE9B-4554-b796-c52fac838842

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/error-code-80070570/51c5b0d3-BFDD-4f69-bff7-623954866b59

• When I try to download the windows update, download 2007Microsoft Office suitService Pack3 SP3 275,7 MB 1%, it will fail with error code 80072EFE

  When I try to download the update of windows, download 2007Microsoft Office suitService Pack3 SP3 275,7 MB 1%, it will fail with error code 80072EFE, Please HELP

  Hello

  1. are you able to install some other updates?

  I suggest you try the steps from the link below and check if it helps.

  Temporary connection related errors may occur when you use Windows Update or Microsoft Update: http://support.microsoft.com/kb/836941

  Hope this information is useful.

• Fresh install of Windows 8 the new SSD and Windows update found 127 updates and they failed with error code 80248007

  I've been struggling for weeks to try to get my computer Windows 7 update to Windows 8.1. It is not interesting to go in full history frustrating because I gave the update and now I just try to start over again. The recent measures and current situation is as follows:

  1 PC is powerful enough with i7 and 16 GB chip.

  2. new SSD this week.

  2. freshly downloaded Windows 8 Pro ISO burned to a DVD and checked.

  3 Ran install successfully and signed using my Microsoft Account.

  4 tried Windows Store for Windows 8.1, but said I need updates.

  4 Ran Windows Update in Control Panel.

  5. Windows update found 127 updates and they failed with error code 80248007.

  I don't understand how I can get these failures with a new facility.

  Any help will be greatly appreciated. Thank you all in advance!

  Hello

  Glad you got it going... If I had to guess, it was very likely updates .net 3.5, which has caused the problem... or maybe, Net 4.5...

  They require a process runs to complete their installation that seems to start running in the middle of updates remaining to try to install...

• OPatch failed with error code = 1

  You try to run error message like Opatch

  D:\OPatch > opatch - help

  The Oracle home D:\ isn't YES home based. Please give good Oracle Home.

  OPatch returns with error code = 1

  OPatch failed with error code = 1

  Any body had this problem?

  Thanks in advance

  John,

  I YES folder

  in D:\Oracle\Middleware\oracle_common\oui\jlib?

• OPatch failed with error code = 41

  I am trying to apply the patch to a database not CARS 11.2.0.4 on Windows Server 2008.

  I followed the README which is available in the hotfix package.

  (1) disabled WMI

  (2) stop MSDTC and WINMGMT

  (3) Oracle Stopped all services and changed to manual start of the following:

  (a) Service of the VSS oracle

  (b) oracle JobScheduler

  (c) oracle MTS Recovery Service

  (d) oracle Listener

  (e) OracleService

  However, the patch still failed with error code = 41. And the message is to say

  The recommended measures: OPatch must change the files that are used by some processes.
  
  

  as a result of

  The following files are present:

  F:\Oracle\product\112~1.0\dbhome_1\bin\oracell11.dll

  F:\Oracle\product\112~1.0\dbhome_1\bin\oraasmclnt11.dll

  F:\Oracle\product\112~1.0\dbhome_1\bin\orapls11.dll

  F:\Oracle\product\112~1.0\dbhome_1\bin\orageneric11.dll

  F:\Oracle\product\112~1.0\dbhome_1\bin\oraclient11.dll

  F:\Oracle\product\112~1.0\dbhome_1\bin\oracommon11.dll

  F:\Oracle\product\112~1.0\dbhome_1\bin\oraxml11.dll

  F:\Oracle\product\112~1.0\dbhome_1\bin\orannzsbb11.dll

  F:\Oracle\product\112~1.0\dbhome_1\bin\orazt11.dll

  F:\Oracle\product\112~1.0\dbhome_1\bin\oraztkg11.dll

  F:\Oracle\product\112~1.0\dbhome_1\bin\oran11.dll

  F:\Oracle\product\112~1.0\dbhome_1\bin\orantcp11.dll

  F:\Oracle\product\112~1.0\dbhome_1\bin\oranl11.dll

  F:\Oracle\product\112~1.0\dbhome_1\bin\orancrypt11.dll

  F:\Oracle\product\112~1.0\dbhome_1\bin\orahasgen11.dll

  F:\Oracle\product\112~1.0\dbhome_1\bin\oraocr11.dll

  F:\Oracle\product\112~1.0\dbhome_1\bin\oraocrb11.dll

  F:\Oracle\product\112~1.0\dbhome_1\bin\oraocrutl11.dll

  How to kill these processes? What is with these files?

  Thank you!

  If you have access to Oracle Support, please see the Doc ID 1348018.1

  If this is not the case, use process Explorer you can download from Microsoft, as suggested by Cyrille.

  Hope that helps.

• I have already installed creative cloud and illustrator (trial) but when I turn on the computer and restart windows, it fails with error code 16 and need me to remove the program, and reinstall.

  I have already installed creative cloud and illustrator (trial) but when I turn on the computer and restart windows, it fails with error code 16 and need me to remove the program, and reinstall.

  Need help.

  Hello

  Please see the link below.

  Configuration error. CC, CS

  Hope this will help you.

  Kind regards

  Hervé Khare

• OPatch failed with error code = 74

  Hi all
  
  I am trying to apply a Patch to fix a HFM error, but the patch has failed for the following reason:
  
  I applied the apply, but the patch failed due to the following error:
  
  ApplySession failed when prior checks: checking prerequisites 'CheckActiveFilesAndExecutables' failed.
  System intact, OPatch will not attempt to restore the system
  
  OPatch failed with error code = 74
  
  According to the documentation of patch, step 1 is to stop Services of HFM, HsxServer.exe, HsvDataSource.exe and CASSecurity.exe process on all application servers.
  
  I couldn't find these processes under Task Manager on our server HFM. So I stopped all Financial Services of the Hyperion of services.
  
  I can't find these processes. I don't know if just by stopping all these processes automatically interrupted HFM services?.
  
  Help, please!

  It might be useful to restart the server to clear all the locks on the files and make sure that no Hyperion not associated services are set to start before restarting the case, once you have restarted the files will be locked again.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Windows 2008 SP2 installation failed with error code 0 x 80041002

  Hello

  I have a Windows 2008 x 86 with Service Pack 1 installed. I tried to install Service Pack 2, but failed with error code 0 x 8004102.

  I tried the steps in http://support.microsoft.com/kb/947366:

  1 uninstalled antivirus.

  2. install KB947821 analysis tool

  3. downloaded and run the standalone version http://www.microsoft.com/downloads/en/details.aspx?FamilyID=a4dd31d5-f907-4406-9012-a5c3199ea2b3&displaylang=en

  Without success. What should he do next?

  Thank you

  Frank

  Hi Frank_673,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited to the audience on windows server. Please post your question in the forum.

  Link:http://social.technet.microsoft.com/Forums/en-US/category/windowsserver

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• KB898461 repeatedly fails with error code 0x80070005 - what can I do about it?

  KB898461 repeatedly fails with error code 0x80070005 - what can I do about it?

  KB898461 repeatedly fails with error code 0x80070005 - what can I do about it?

  Run the automatic fix here and try again once the update manually by downloading it from HERE

• I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

  I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

  The primary partition has the following folders (including hidden & system)

  The recovery partition has the following (including the language files more)

  Someone at - it ideas why my laptop does not work?

  Thank you

  Greg

  Hello

  You press F11 on startup with a HP Compaq to start the recovery process.

  For problems with the recovery process, you will need to contact HP.

  BIOS problems:

  There are messages for the HP Forums for posters with similar errors:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

  http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

  All the answers it point to a drive about to fail

  See you soon.

• whean I run any program related to windows, finally installation failed with error code: (0x80070005)?

  I tried to run the .NET framework. All files are downloaded, but finally the installation failed with error code: (0x80070005)

  NET FRAMEWORK 4 fails installation

  1) download setup of .net 4 by http://www.microsoft.com/download/en/details.aspx?id=17718

  2) double-click the downloaded file to start the installation

• CPU12.1.0.2.3 opatchauto failed with error code 255.

  I want to install the 12.1.0.2.3 critical update (April 15, 2015) for the independent network on Linux Infrastructure.  It fails with the error code of subject and the following additional messages:.

  The user is root. OPatch cannot continue if the user is root.

  opatchauto failed with error code 255.

  These instructions specifically tell me to log in as root before installing the patch, so what happens?

  The instructions show all first update OPatch later, that I've done and checked.

  Secondly, a CMO response file is required, so I followed the steps to create this file and saved as /home/grid/ocm.rsp with the 644 default permissions.

  Third, the instructions say to download the patch and unzip it in an empty slot that can not be/tmp.  I created a new/home/grid/foo directory and unpacked the software to this location.  Thus, the location of chilling is/home/grid/foo/and in this directory are only two things: a file named PatchSearch.xml and a directory named 20485724.

  Fourth, the readme indicates the patch must be installed by a user with root privileges, so I logged as root.  (Oracle ) Note 1591616.1 said to connect as root, not only be as root). 

  As root I set environment variable for ORACLE_HOME pointing to the home of GI, and I set PATH = $PATH: $ORACLE_HOME/bin: $ORACLE_HOME/OPatch.

  Finally, I call opatchauto with the required parameters and get an error saying I can't be root.  I fussed with the parameters and the result is always that I can not be root.

  Documentation,.

  Case 3: Patch only IG home

  You must use the following instructions if you prefer at patch Oracle GI (grid Infrastructure) only with this patch.

  Case 3.1: Welcome IG no shared

  If IM home is not shared, then use the following instructions to patch the House.

  3.1.1 case: ACFS file system is not configured

  Follow these instructions in this section if IM home is not shared and none of the Oracle database houses using the filesystem ACFS to its software files.

  Do the following on each node in the cluster.

  As user root, run:

  # opatchauto apply <UNZIPPED_PATCH_LOCATION>/%BUGNO% -oh <GI_HOME> -ocmrf <ocm response file>

  My order is,

  opatchauto applies/home/grid/foo/20485724-oh /u01/app/12.1.0.2/grid - ocmrf /home/grid/ocm.rsp

  So, not a problem of syntax.  It simply doesn't let me run as root despite this being a difficult requirement.

  The problem was due to a 32-bit version of OPatch installed on our Linux 64-bit server.  After we installed the correct OPatch the error disappeared.

  The shift occurred because the OPatch link download in the Readme for the edition of 6 bits points to a 32-bit version of the download OPatch PSU and CPU patches.  Not sure why a readme for 64-bit software made us in a 32-bit download file, but we know now to double check everything.