Help redefine the colors work... Please!

Similar Questions

• Need help with the color picker please

  OK, I'm green to the illustrator cs4 program. But I know it's a setting somewhere that I am missing, just not sure of the correct to check or change place. When I create an image, select the following color hex #0039 6 to use as a background color, when I save the image, the colour of say's: 1F429B

  why it converts it and how do I change to not do this?

  cswd,

  To keep the color, your file > Document Color Mode should not be RGB, CMYK.

  In the CMYK color Mode, when a color is outside the range of CMYK, it will be changed to the color (I hope) best equivalent within the CMYK range.

  Of course, if you need to print CMYK color, you must work in CMYK mode.

  Exclusive Web / another screen use, stay in RGB.

  If you need both CMYK and RGB use screen printing, you will get (usually) different appearances unless you start in CMYK mode.

• I need help on the colors in first pro.

  I need help on the color in general information.

  http://www.YouTube.com/watch?v=vLEGtzyZ0Fs

  I made this video in AfterEffects and exported in color 16-bit png sequence.

  I then imported in first pro and added audio and some titles at the end.

  Now, I want to do is have a perfect version that I could watch on my pc.

  I used Mp4 h 264 to compress the video and it is on youtube.

  I think that this compressor support only 8-bit color because there are bands in the sky.

  Now, I have to make a version which is of very high quality that I can watch on my pc... I tried several codecs and it does not work.

  The problem is so long that there something on top of the png sequence in premirere pro as an image or something, it's like

  the displacement of the image in 8-bit color mode.

  It's using Avi Lagarith lossless codec

  Before there is a picture on top...

  

  Just after that, the image appears... As you can the there are a few bands on this image.

  I know it's subtle, but I want to know why this is happening.

  

  Is there something I'm missing... I took much too long to try to fix this.

  I ended up using the Quicktime animation codec for my video. The problem does not occur with this one, and I can't see any decline in the quality of the image.

  Now, I have a file compressed at low cost for online viewing and a huge file that I can watch on my computer.

  On a side note, can you guess how many hours it took for my computer make the png of this video sequence... 12 HOURS!

  Should I get a new computer...

  Thanks for the reply!

• Work to redefine the colors of PMS is far from the original

  I don't think I've used the Panel 'Redefine' since I upgraded to CC...

  Today, I went to convert a few logos CMYK to PMS and I got a rude surprise--the colors were either super pale versions of their origin or have been completely different shades in total.

  Here is an example:

  

  Here are my options panel:

  

  Is there something obvious that I'm missing?

  Cat Adobe support was not helpful at all.

  
  Help, please!

  Click the eyedropper icon in the dialog box Recolor work directly after opening.

• Capacity color Photosmart D7260 No. in the documents, but the color works in photos. iMac 10.6

  All of a sudden my printer D7260 renounced the print color. I printed a picture to see what happen & it prints in color is fine. What could possibly cause the color of the document printing give up? I have an iMac running 10.6.

  I've been printing both photos & docs with this printer for years. Installed 10.6 year last & always everything has worked well. After I posted this question yesterday I downloaded a driver 10.6 for an Apple llink that someone gave to another person who had posted a similar problem (but not the same). I thought I had nothing to lose! I am pleased to announce that it has solved my problem. It is now printing docs and photos!

• Help eliminate the color cast

  Hi, can someone give me an explanation on how best to remove the color cast from this photo please in Photoshop CS 5 or CS 6 Beta.

  

  Thanks for any help.

  Kevin

  I set out to try to describe how to fix, so I'm in the area and just done.

  Several curves and Hue/Saturation layers participated initially to get a bunch of small red and standardize the channels, then I did some restoration of painting on a layer of color set to color.  Then I stamped it all into a single image and tidy with some Dodge and Burn.  Finally I have it sharpened ever so slightly with one of my fractal of sharpening actions.

  

  -Christmas

• Hue Saturation in Photoshop - how to choose the color of the library or the color selector please?

  Hello

  I'm new to photoshop and I'm trying to change the background color.

  I clicked on the menu, "select", then "color range", "overview of the selection" gray scale selected, then clicked OK, this has highlighted the sections I wanted to change the color of black.

  I then went to the "Layer" menu then "new adjustment layer" then "hue/saturation" where I could use the slider to change the color, but I would like to change the color of a color in my library (my colors brand) or at least use a color picker to choose these colors or enter a hexadecimal value.

  Some help would be greatly appreciated, I can't find anything online to help.

  Thank you

  JO

  If you start a new file, the easiest way is to choose the background color immediately:

  I chose the background color, and you can type in the hexadecimal code. You can even save this preset.

  

  For a file existing, presupposed the background layer has a different solid color: change the background layer to a regular layer (must be unlocked, changing the shade of foreground (you can use the color picker), use select all to select the entire layer and use the paint bucket to fill with the foreground color.)

• How to keep the colors using the tool to redefine the colors in the range

  I try to paint some pictures of complex mesh. I'm running out of problems with the Recolor tool creating colors of the range and not having not control global group, I had before using the tool.

  I have all my assigned as global color swatches, and I assured that all colors are in the range. I then lock the layers, I don't want to change and choose the ones I do. I then select the Recolor tool, select the tab edit and click to link colors. Then I play with the STL to make color changes, I want to do for the selected layers. I have create a new color group, and then click OK.

  I now have a new design. Nice, but now some of the colors may be out of gamut, and because I have not now global colors I can't easily change their return to be in the range.

  So is there a way to keep the image recolorée to stay in the range? And to create global colors that I can then edit to change my mesh?

  Thanks for any help/clues.

  I have not hink it is possible to keep the colors in the range. The only thing yo could do is limit colors resulting libraries of nuances. You could choose a big library such as the PANTONE. But that would of course still limit yourself to a smaller range of colors that may be required.

• Help: Change the color of the font of the text in a Table with the key

  Hi all

  I'm designing a website for a college project in Dreamweaver CS3. Currently, I am implementing accessibility for users, creating a background/font color changer. By making the transparent table, I can now change the background color together. However, I'm fighting to change the color of the font.

  To see what I mean, here is so far the Web site: http://itsupport.comlu.com/index.html

  At the top left, you will notice buttons. It's the color changer.

  The problem of course, is that the text is unreadable when I change for say, a white background.

  Here is my code for the buttons:

  <! - color changer - >
  	< form >
  	"" < input type= "button"
  	value= "White" style= 'background: white;"
  	onClick= "document.body.style.backgroundColor ="#FFFFFF "; "Table1.FgColor = '#000000';" >
  	"" < input type= "button"
  	value= "Green" style= 'background: Green;"
  	onClick= "document.body.style.backgroundColor = ' #008000 '; document.fgColor =' #FFFF00";">"
  	"" < input type= "button"
  	value= "Blue" style= 'background: Blue;"
  	onClick= "document.body.style.backgroundColor = ' #0000CC '; document.fgColor ='#FFFFFF ';" > "
  	"" < input type= "button"
  	value= "Red" style= 'background: Red;"
  	onClick= "document.body.style.backgroundColor = ' #FF0000 '; document.fgColor =' #FFFF00";">"
  	< / make >

  The table is named "Table1". I guess I have to refer to this somehow, but I don't know how. You can see in the code of the white button I tried "Table1.fgColor" and similar variations.

  I know many of you will say just "do not use tables. Yes, I learned that the hard way. Unfortunately, I have no time completion of this project, so I do not wish to recreate the entire site using DIV tags

  Thanks in advance!

  You can download the .js files on the example site you mentioned. Or, you could use a CDN service hosted and your page a link to there .js files.

  You can link jquery.js from Google - http://ajax.googleapis.com/ajax/libs/jquery/1.7.2/jquery.min.js

  Code will be in yourTags as follows:

  You can also download these files .js locally and bind them on your own server.

  This is a jQuery CDN repository: http://code.jquery.com/

  You can also use another CDN - http://docs.jquery.com/Downloading_jQuery#CDN_Hosted_jQuery

• Help with the color picker appears off screen

  On my larger screen, the color selector window appears because real estate is much bigger.

  Unfortunately, I don't have access at this time.

  When I choose the color picker, the window must be off the screen.  I have to hit enter to close, but I can't use the functions.  How can I get the color selector window appears on the screen of my laptop now?

  Thank you!

  Hold down the Command + Option + shift dow as you launch Photoshop, then check the box to set or remove preferences in the dialog box that follows.

• HP 4320 s replace HDD--> DDD, help with the correct choice please

  Hi all

  I want to replace my 250 GB HARD drive on some of the SDS, what type of disc that I'm looking for? What will be the best sollution for 120 and 250 GB have? I really don't know anything about the types of connectors and other "serial sata" that means anyone can get listed something? I read that there are series of SDS 330 from Intel that match? Looking for connectors SATA 3 or 6 GB?

  Thanks for understanding noob

  Here is the Service Manual:

  Manual

  See Page 73. The hard drive in this one is a little harder to get to than your average laptop, so be careful.

  It's a standard thickness of 2.5 inches wide of 9.5 mm SATA. You can use any 2.5 inch wide 9.5 or 7 mm thick SSD. I recommend the Samsung 840 Evo:

  Here's the 120 gig for about $85 and there are links to all available sizes.

  http://www.Newegg.com/product/product.aspx?item=9SIA29P1EC5421&cm_re=samsung_840_evo_ssd-_-20-147-247-_-product

  Your interface is SATA 2 3gbps, but don't sweat it... 6Gbps SATA-3 discs downclock of will and work very well. There is very little difference in the real world real performance betweeen the two interfaces. Buy, install and enjoy. If you need assistance with the resettlement/migration software we can help there, too.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Help on the contingent work using dbms_sheduler restaurant.

  Oracle experts,
  
  I checked the docs of oracle to schedule a task of conditional based on my condition but I do not understand how to implement this. Please give me some ideas on how to do this.
  
  My requirement as follows:
  The work must be configured to run on the 1st Jan, Apr, Jul, Oct 09:00 central.
  
  Conditions are the following:
  (1) if the yr_close_day of the "table_x" yesterday, then wait a day and run (where quarter = 4).
  (2) if the day of the week is Sunday, then wait a day and executed (what quarter! = 4).
  
  Thanks in advance.
  
  --
  Anan.
  
  Published by: Anan Ben may 22, 2012 06:43

  IMO, you cannot schedule a job like that.

  But you can write a procedure with all of these conditions and if condition satisfied do and donot other wise.

  and schedule a task at regular intervals.

  as you can have your procedure

  Create procedure p as
  Start
  So so - what you specified in the question.
  -action
  end if;
  end;

  and the action as p for your work.

• help on the photo files please

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: i have connected my drive hard dvr to my computer to read the miv files but I can not open files

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  ·        What happens when you try to open the files? You get the error message on the system?

  ·        What program do you use to open the files on the system? Do you have any third-party program installed on the system?

  ·        Were you able to open these files before on the system?

  Give details, so that we can help you in a better way.

  File MIV is a seller of MapImagery profile. MapImagery is a free plugin for users of MapInfo providing tools that makes it easier to use imagery in MapInfo Professional.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need help with the Web page please

  Hi have the banner from the top of my Web page that illustrates in Firefox, but does not appear in internet explore. Clues? www.topaffiliatespro.com/wealthy_affiliate_review/

  First of all, your page doesn't have a valid document type declaration (DTD) on the first line.  This means that your page is running in Quirks Mode, which can cause unexpected results in browsers.

  To add a document type for pages in DW, click Modify > Page Properties > title/encoding and select a document type that corresponds to your coding skills.  Recommend HTML transitional.

  Secondly, you have throughout your web page, the links that point to files on your local hard drive.

  background="file:///D%7C/Documents%20and%20Settings/USER/Documenti/templates/template2/images/left_shadow.gif"
  

  These links must be resolved so that they point to files in your local site.  Correctly define a local site folder in DW before you start this project?

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB
  http://ALT-Web.blogspot.com

• recently I formatted my windows XP PC. after update to show that it does not allow the genuine.but when I brought it was authentic. I have the product key with me.Please,help help find the solution

  recently I formatted my windows XP PC. after update to show that it does not allow the genuine.but when I brought it was authentic. I have the product key with me.Please,help help find the solution

  Please visit http://www.microsoft.com/genuine/ and click the Validate Windows button, then restart your computer.

  If you were not able to validate, follow these steps:

  1. Download this diagnostic tool, save it to your desktop: http://go.microsoft.com/fwlink/?linkid=56062

  1B. double-click the executable file to run the tool.

  2. after running the tool, click the Windows tab, and then click copy in the Clipboard.

  NB: You can open a new file in Notepad, paste the contents of the Clipboard in it & keep for future reference.

  3 start a new thread in the following forum and paste the results of the WGA diagnostic data in a post detailing the problem: http://social.microsoft.com/Forums/en-US/genuinewindowsxp/threads

  4 Troubleshooting specialist will analyze the data and recommend an appropriate solution.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft