Help required with control PID for RPM control application
Hi guys,.
I worked on this project for a while that I started from scratch. Here's the idea: the centrifuge of the computer in the control, use the analog output voltage, meter of entry to get the frequency of rotation. Optointerruptor is defined as the frequency measurement is exactly the same as the number of TURNS. I tried to create a loop to output test voltage and he took in the acquisition of data to test everything and determine the gains of PID. As everything worked well, I went to the entrance of counter to test the model in reality. I faced following problem: task does not run on virtual meter inlet channel. If I don't get in the loop of PID process variable and anything not working as it should.
I have attached an excerpt from the code of the entry of counter as well as one of the control loop that worked very well. Maybe you can point me in the right direction. Thank you!
Best wishes
Mariia
Have you ever had the counter entry work? Build a simple program that reads only from the entrance of the meter. It work? If this isn't the case, you get an error in the DAQmx screw? If so, what is the error? If not, what is the result of the DAQmx Read? You can connect your input of an oscilloscope to verify that your hardware is properly production of pulses?
Tags: NI Software
Similar Questions
-
HI all I would like to ask if you help me, I want to draw paths, but when I use options to mark with a pen or brush settings I lose quality when I Zoom, can someone help me with the settings for the pen?
The work path is a vector and infinitely scalable, but when caress you, Photoshop sets the pixels on a layer following the path. These pixels are rasterized and based and cannot be resized without loss of quality. You have options. If you want to enlarge the raster layer, transform the work path and stroking again. Or work at a resolution higher, in the first place.
Either incidentally, you can't trace a path with the pen, because it's a vector tool, and caressing is a matrix function based.
-
I have RECIVED YEAR EMAIL FROM ADOBE AS: as gesture of goodwill, we can help you with the upgrade for PSE 13. We ask you to place the order for Adobe Photoshop elements 13 upgrade and then provide you with the serial number of the full version of the product, even against the new order of upgrade"IS this UPGRADE FREE AND CE WHO SHOULD DO, HOW can I HAVE THIS UPGRADE?
HOW I CAN PLACE THE ORDER AND IS IT FREE?
-
Impossible to install updates 800700c error code 1 is up.help required with problem
computor model Fujitsu amilo pi3410
Hello
1. the updates of windows are getting failed?
2. don't you make changes to the computer before the show?Method 1
I suggest you to run the fixit from the following link:The problem with Microsoft Windows Update is not working
http://support.Microsoft.com/mats/windows_update/Method 2
I suggest to perform the clean boot and then try to install the updates.How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.Method 3
I suggest you try the steps from the following link:Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
http://support.Microsoft.com/kb/2509997
Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows Vista
Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost. -
Help required with Windows 7 Activation
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 0
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - GJY49 - VJBQ7-HYRR2
Windows product key hash: W5/6nm6F2UPXrCkY5xUhXb / + 21 = g
Windows product ID: 00426-OEM-8992662-00006
Windows product ID type: 2
Windows license Type: OEM SLP
The Windows OS version: 6.1.7601.2.00010100.1.0.001
ID: {0D45C85E-AA01-4C64-8FAF-0582E5839859} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Ultimate
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.130828 - 1532
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 103 blocked VLK
Microsoft Office Enterprise 2007 - 103 blocked VLK
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
[File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0x80070005]
[File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0x80070005]Other data-->
Office details:{0D45C85E-AA01-4C64-8FAF-0582E5839859} 1.9.0027.0 6.1.7601.2.00010100.1.0.001 x 64 *-*-*-*-HYRR2 00426-OEM-8992662-00006 2 S-1-5-21-1267476948-1634095527-3693179229 Acer Aspire 4349 INSYDE V1.06 20110929000000.000000 + 000926C3D07018400FE 0409 0409 peninsula malaise Standard Time(GMT+08:00) 0 3 ACRSYS ACRPRDCT 103 103 Microsoft Office Enterprise 2007 12 ACD7202654E586 fFic3JgCreGGRxyF8uMWB4R4Jcg = 89388-707-1528066-65164 14 Content Spsys.log: 0 x 80070002
License data-->
Input error: can not find script file "C:\Windows\system32\slmgr.vbs '.Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0x00000000
Beyond: 0 x 0000000000000000
Event timestamp: 4:8:2014 23:53
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: not registered - 0x80070005
Output beyond bitmask:--> HWID data
Current HWID of Hash: MgAAAAIAAgABAAEAAAABAAAAAwABAAEA6GG6Ts1QVOwordDWTOi6hmayntBaxdsFLnM =Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: no, table invalid SLIC
Windows marker version: N/A
OEMID and OEMTableID consistent: n/a
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC ACRSYS ACRPRDCT
FACP ACRSYS ACRPRDCT
HPET ACRSYS ACRPRDCT
START ACRSYS ACRPRDCT
MCFG ACRSYS ACRPRDCT
ASF! ACRSYS ACRPRDCT
SLIC ACRSYS ACRPRDCT
SSDT ACRSYS ACRPRDCT
ASPT ACRSYS ACRPRDCT
SSDT ACRSYS ACRPRDCT
SSDT ACRSYS ACRPRDCTProposed by the moderator of this thread:
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/win-7-ultimate-not-activate/d11e156c-2d51-4a12-8130-91e6ee815fa4#LastReplyInput error: can not find script file "C:\Windows\system32\slmgr.vbs '.
(1) open a by a right-click command prompt and select "run as Administrator".
and then at the command prompt, type: chkdsk /f r, then press the Enter key.If you are asked to plan the volume to check the next time that the system restarts,
Enter: yIf you know the manufacturing of your hard drive you can also download their diagnostic software.
Another use: SpeedFan has an online health analysis function
(SMART tab) for hard drives. It will show how your disks
compared with other discs of the same brand and model.
http://www.almico.com/SpeedFan.php=====================================================================
(2) run the command SFC /SCANNOW. This will check and repair if necessary all of the critical Windows system files.
Click on start / all programs/accessories then
Right-click on the command prompt option and select "Run as Administrator".
(or "Safe Mode" open a command prompt)
At the command prompt, enter: SFC/scannowWindows 7 - order SCANNOW SFC - System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
http://support.Microsoft.com/kb/928228===============================================================
If SFC Scannow was able to repair your files, try to activate Windows again.
1) click Start and in the search for box type: slui.exe 4
(2) press the ENTER"" key.
(3) to select your "country" you are in the drop-down list.
(4) choose the option "activate phone".
(5) stay on the phone * do not select/press any option * and wait for a person to help you.
(6) explain your problem clearly to the support person.
(7) the person must give you a confirmation ID, copy it down on paper,
(8) check that the ID is correct in reading the support person.
(9) to enter the ID number, then click 'Next' to complete the activation process.Activation and registration of a Microsoft product
http://support.Microsoft.com/?kbid=326851
Windows activation: (888) 571-2048
(888) 725-1047 or 800-936-5700===============================================================
If SFC Scannow could not repair any or all the corrupt system files
follow these steps:(a) open a command prompt (start / all programs / accessories)
Right click on the command line option, then select: run as administrator(b) at the command prompt, enter: DISM.exe/online/Cleanup-Image /ScanHealth
Press the ENTER"" key.
(c) then enter: DISM.exe/online/Cleanup-Image /RestoreHealth
Press the ENTER"" key.
(d) now rerun the command SFC/SCANNOW...
At the command prompt, enter: SFC/scannow
J W Stuart: http://www.pagestart.com
-
Help required with Build of Windows not genuine
Diagnostic report (1.9.0027.0):-----------------------------------------Validation of Windows data-->Validation code: 50Validation caching Code online: n/a, hr = 0xc004f012Windows product key: *-* - 74XYM - BH4JX-XM76FThe Windows Product Key hash: KeYfcvXg/a1Q01x73 + f8IL/JC4Y =Windows product ID: 00359-112-0000007-85471Windows product ID type: 5Windows license type: retailThe Windows OS version: 6.1.7601.2.00010300.1.0.003ID: {B5138A86-A74D-40E4-8375-86E6E734CFB1} (1)Admin: YesTestCab: 0x0LegitcheckControl ActiveX: N/a, hr = 0 x 80070002Signed by: n/a, hr = 0 x 80070002Product name: Windows 7 Home PremiumArchitecture: 0 x 00000009Build lab: 7601.win7sp1_gdr.130828 - 1532TTS error:Validation of diagnosis:Resolution state: n/aGiven Vista WgaER-->ThreatID (s): n/a, hr = 0 x 80070002Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->Cached result: n/a, hr = 0 x 80070002File: No.Version: N/a, hr = 0 x 80070002WgaTray.exe signed by: n/a, hr = 0 x 80070002WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->Cached result: n/a, hr = 0 x 80070002Version: N/a, hr = 0 x 80070002OGAExec.exe signed by: n/a, hr = 0 x 80070002OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->Office status: 109 n/aOGA Version: N/a, 0 x 80070002Signed by: n/a, hr = 0 x 80070002Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->Proxy settings: N/AUser Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)Default browser: C:\Program Files (x86)\Google\Chrome\Application\chrome.exeDownload signed ActiveX controls: fastDownload unsigned ActiveX controls: disabledRun ActiveX controls and plug-ins: allowedInitialize and script ActiveX controls not marked as safe: disabledAllow the Internet Explorer Webbrowser control scripts: disabledActive scripting: allowedRecognized ActiveX controls safe for scripting: allowedAnalysis of file data-->Other data-->Office details:{B5138A86-A74D-40E4-8375-86E6E734CFB1} 1.9.0027.0 6.1.7601.2.00010300.1.0.003 x 64 *-*-*-*-XM76F 00359-112-0000007-85471 5 S-1-5-21-4203167718-1964513498-3843401065 Hewlett-Packard p7-1007 c American Megatrends Inc.. 6.11 20111228000000.000000 + 000D8BB3E07018400F4 0409 0409 Time(GMT-08:00) Standard Pacific 0 3 HPQOEM SLIC-CPC 109 Content Spsys.log: 0 x 80070002License data-->The software licensing service version: 6.1.7601.17514Name: Windows 7 HomePremium editionDescription: operating system Windows - Windows (r) 7, retail channelActivation ID: 2e7d060d-4714-40f2-9896-1e4f15b612adID of the application: 55c92734-d682-4d71-983e-d6ec3f16059fExtended PID: 00359-00170-112-000000-00-1033-7601.0000-1872013Installation ID: 014995665130071472847356144860222392052571458596790191Processor certificate URL: http://go.microsoft.com/fwlink/? LinkID = 88338The machine certificate URL: http://go.microsoft.com/fwlink/? LinkID = 88339Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340Partial product key: XM76FLicense status: NotificationReason for the notification: 0xC004F031.Remaining Windows rearm count: 3Trust time: 06/12/2013 23:27:36Windows Activation Technologies-->HrOffline: 0x00000000HrOnline: 0xC004C533Beyond: 0 x 0000000000000000Event timestamp: 12:6:2013 23:16ActiveX: Registered, Version: 7.1.7600.16395The admin service: recorded, Version: 7.1.7600.16395Output beyond bitmask:--> HWID dataCurrent Hash HWID: MAAAAAEAAgABAAEAAAACAAAAAgABAAEAonY8VDRcVPkgkUqzVMjqRQKo5qYA + xh5Activation 1.0 data OEM-->N/AActivation 2.0 data OEM-->BIOS valid for OA 2.0: YesWindows marker version: 0 x 20001OEMID and OEMTableID consistent: YesBIOS information:ACPI Table name OEMID value OEMTableID valueHPQOEM APIC-SLIC-CPCFACP SLIC-CPC HPQOEMSRAT HPQOEM SLIC-CPCHPET SLIC-CPC HPQOEMMCFG SLIC-CPC HPQOEMSLIC SLIC-CPC HPQOEMLASRYVITRAGE HPQOEM SLIC-CPCSSDT HPQOEM SLIC-CPCSSDT HPQOEM SLIC-CPCYour message has been split from the original thread because it was a completely different issue from what has been discussed here. It can become quite confusing talk more than a complex issue in a single thread.
I think that this message of Christmas Paton is likely to be the way to solve your problem:
Windows complains because he thinks that the hardware has changed - you will need to use telephone activation.
There is no sign that the installation is a counterfeit - do you have the original packaging?
activation by telephone (call of the operator)
Click the Start button
in the search box, type
SLUI 4
and press the Enter key
Follow the instructions, but when asked what service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you
Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers
No - I do not work for Microsoft or one of its contractors. -
Hello
I have a table with two fields that have 1-> n relationship.
Ex: TableA Field1 and Field2.
For a value of field2 there may be several Field1 in TableA (essentially field2 is part of categorization for fiel1).
In the query I want to determine which records where, for particular values of field2 only field exists.
Ex:
Field1 Field2
1A
2A
3B
4 C
D 5
D 6
For the above case the query should return only the records
Field1 Field2
3B
4 C
Please help me accomplish this query...
Thank you
RajaHello
Raja Guibert wrote:
Frank Merci for the reply,
Can you please help me understand why the min function is required on Field1...Here are the ABCS of the GROUP BY.
When you use an aggregate (such as COUNT) function in a query, then everything in the SELECT clause must be:
a ggregate function,
expressions (b), the GROUP B, or
c a Cadding
or an expression composed entirely of the foregoing.Field1 is none of them. We cannot add Field1 to the GROUP BY list, because we need all the lines for each set Field2 in the same group.
I can simply use
Select field2 from tableA having count (*) = 1 group of Field2;
Of course, you can do it if you don't need field1 in the results.
-
Hi guys. I am new to this and in total confusion. I bought a aspire v15 nitro preloaded with win 8.1. I've updated to win 10 but decided to decline to 8.1. Process has failed and I got the blue screen error msg and a useless piece of plastic. I had to buy a set of recovery disks (reluctanlty at a cost of £51 - yes I know stupid me). I tried to reinstall from the disc, but I suck. I have acer cntacted and they have now tell me that I have to first download and install and disk formatting tool. I am confused now totally frustrated and quietly seething. I need help, I'm outta my depth here. Can anyone provide assistance as to what HD formatting of tool to download - what should I do with it to finally lift the laptop and run again? Your help is greatly appreciated!
If you recovery media standard windows options, you can try to select "repair my computer" - Troubleshooting - Advanced Search - command prompt
Once in the command prompt type
DiskPart
then, type diskpart
list disk
take note of the correct disc ID to clear
type
Select disk x
(where x is the ID of your disk to erase)
type
clean
Type exitIf you do not have this option:
http://www.partitionwizard.com/Partition-Wizard-bootable-CD.html
Download the .iso file
then use a software to burn CD/DVD or USB flash drive and burn the .iso file
Once completed, put the CD/DVD/USB on your PC, boot from CD/USB (maybe you need to start under the legacy if you have the UEFI BIOS)
Press F12 on startup and choose the CD or USB
at the level of the Office
Select your HARD drive
Right-click on the icon for your HARD drive and choose completely erase your HARD drive (it will erase any GPT or MBR at the disk), choose the first option after selecting the clear function.
Exit the wizard partition, boot from the BIOS, UEFI return of the Legacy (if you have the UEFI BIOS) and boot from media erecovery. -
Help required with MuseJSassert error: TypeError: $ is not a function.
Hello
I'm not good at code so hopeful that someone can help me solve the error above, which I get during the incorporation of a form of mailchimp in a publication:
Thank you very much
Chris
Here is the embed code Mailchimp:
<! - Begin MailChimp registration form - >
"< link href="//cdn-images.mailchimp.com/embedcode/classic-081711.css "rel ="stylesheet"type =" text/css">
< style type = "text/css" >
#mc_embed_signup {background: #fff; clear: left; font: 14px Helvetica, Arial, without serif ;}}
/ * Add your own form of MailChimp / style in your style of site or block style sheet.
We recommend that you move this block and the previous link to CSS in the HEAD of your HTML file. */
< / style >
< div id = "mc_embed_signup" >
< form action="//chrisbrookes.us12.list-manage.com/subscribe/post?u=5bf6272fd78e909d347eca348 & am p; ID = bfa2c40bb4"method ="post"id = 'mc-embedded-subscribe-form' name ="mc-embarque-abonner-form"class ="validate"target ="_blank"novalidate >
< div id = "mc_embed_signup_scroll" >
< h2 > subscribe to our mailing list < / h2 >
< div class = "indicates required" > < span class = "asterisk" > * </span > indicates required < / div >
< div class = "mc-field-group" >
< label for 'mce-FNAME' = > name < / label >
"< input type ="text"value =" "name ="PNOM"class =" "id ="mce-FNAME">
< / div >
< div class = "mc-field-group" >
< label for "mce-EMAIL" = > E-mail address < span class = "asterisk" > * </span >
< / label >
< input type = "email" value = "" name = "EMAIL" class = "required mail" id = "mce-EMAIL" > "
< / div >
< div id = "mce-answers" class = 'clear' >
< div class = 'response' id = "mce-error-response" style = "display: no" > < / div >
< div class = 'response' id = "mce-success-answer" style = "display: no" > < / div >
< / div > <!-real people shouldn't this learn and expect good things - do not delete this nor of danger form bot registration->
< div style = "position: absolute;" left:-5000px; "aria-hidden ="true"> < input type ="text"name ="b_5bf6272fd78e909d347eca348_bfa2c40bb4"tabindex = value"-1 "=" "> < / div >". "
< div class = "clear" > < input type = "submit" value = "subscribe" name = 'subscribe' id = "mc-embedded-subscribe" class = "button" > < / div >
< / div >
< / make >
< / div >
< script type = "text/javascript" src='//s3.amazonaws.com/downloads.mailchimp.com/js/mc-validate.js' > < / script > < script type = "text/javascript" > (function ($) {window.fnames = new Array(); window.ftypes = new Array (); the name [1] = 'FNAME'; ftypes [1] = 'text'; name [0] = 'E-MAIL address'; ftypes [0] = 'e-mail address' ;}}) (jQuery)) ; var $mcj = jQuery.noConflict (true); < /script >
<! - end mc_embed_signup - >
Thanks for your reply. I already inserted the html code in a composition Viewer. The error will appear when you check your page in a browser. I'm assuming that there must be a javascript conflict such that the code works correctly if it is just placed on a page.
-
I have three tables listed below
FORMAT - Columns are format_id, format_desc
VIDEO_FORMAT - areVIDEO_FORMAT_ID of columns, COST VIDEO_ID, FORMAT_ID,
RENTAL - Coulmns are RENTAL_ID, DATE_OUT, DATE_DUE, DATE_IN, DELIVERY_STATUS, LATE_FEE, CUSTOMER_ID, VIDEO_FORMAT_ID
I need to find the customer list id, format description and cost of the video format for customers who have rented a video.
I wrote the request
Select rental r format f, video_format, r.customer_id, f.format_desc, vf.cost vf where f.format_id in (select video_format format_id) and r.video_format_id = vf.video_format_id
This isn't to get accurate results. Help, please.Would know what kind of results you get, but I think that I can see.
Try:
Select r.customer_id, f.format_desc, vf.cost
rental r, f format, video_format vf
where vf.format_id = f.format_id
and r.video_format_id = vf.video_format_idCan't be sure without a little more information so that will set you. But I do not know why you went with trying to get a relationship using an IN with a subquery. It will be useful.
-
Hello
I have data like shown below:
ID DATE NUM_PCT
1 June 1, 2011 1.2
1-2 June 2011 NULL
1-3 June 2011 NULL
1 6 June 2011 NULL
1 July 1, 2011 1.25
1 NULL July 4, 2011
2 June 1, 2011 1.3
2 NULL June 2, 2011
2-3 June 2011 NULL
2 June 6, 2011 1.29
2 NULL June 7, 2011
2 NULL 8 June 2011
2 June 9, 2011 1.31
2 NULL 10 June 2011
and I want to convert the data as shown below:
ID DATE NUM_PCT
1 June 1, 2011 1.2
1 June 2, 2011 1.2
1 1.2 3 June 2011
1 June 6, 2011 1.2
1 July 1, 2011 1.25
1 July 4, 2011 1.25
2 June 1, 2011 1.3
2 June 2, 2011 1.3
2 June 3, 2011 1.3
2 June 6, 2011 1.29
2 June 7, 2011 1.29
2 June 8, 2011 1.29
2 June 9, 2011 1.31
2 June 10, 2011 1.31
I use Oracle 10.2.0.4.0
Please help me in writing a request for it.with t as ( select 1 id,to_date('01-Jun-2011','dd-mon-yyyy') dt,1.2 num_pct from dual union all select 1,to_date('02-Jun-2011','dd-mon-yyyy'),NULL from dual union all select 1,to_date('03-Jun-2011','dd-mon-yyyy'),NULL from dual union all select 1,to_date('06-Jun-2011','dd-mon-yyyy'),NULL from dual union all select 1,to_date('01-Jul-2011','dd-mon-yyyy'),1.25 from dual union all select 1,to_date('04-Jul-2011','dd-mon-yyyy'),NULL from dual union all select 2,to_date('01-Jun-2011','dd-mon-yyyy'),1.3 from dual union all select 2,to_date('02-Jun-2011','dd-mon-yyyy'),NULL from dual union all select 2,to_date('03-Jun-2011','dd-mon-yyyy'),NULL from dual union all select 2,to_date('06-Jun-2011','dd-mon-yyyy'),1.29 from dual union all select 2,to_date('07-Jun-2011','dd-mon-yyyy'),NULL from dual union all select 2,to_date('08-Jun-2011','dd-mon-yyyy'),NULL from dual union all select 2,to_date('09-Jun-2011','dd-mon-yyyy'),1.31 from dual union all select 2,to_date('10-Jun-2011','dd-mon-yyyy'),NULL from dual ) -- end of on-the-fly data sample select id, dt, last_value(num_pct ignore nulls) over(partition by id order by dt) num_pct from t order by id, dt / ID DT NUM_PCT ---------- --------- ---------- 1 01-JUN-11 1.2 1 02-JUN-11 1.2 1 03-JUN-11 1.2 1 06-JUN-11 1.2 1 01-JUL-11 1.25 1 04-JUL-11 1.25 2 01-JUN-11 1.3 2 02-JUN-11 1.3 2 03-JUN-11 1.3 2 06-JUN-11 1.29 2 07-JUN-11 1.29 ID DT NUM_PCT ---------- --------- ---------- 2 08-JUN-11 1.29 2 09-JUN-11 1.31 2 10-JUN-11 1.31 14 rows selected. SQL>
SY.
-
Help required with bundles of file while publishing an app
Hi all
This is the first time that I publish an app on the app store for blackberry. During the download of the new version I'm confused when the beams of the file created. My app supports Blackberry OS 5.0 and above but RIM is asking for accurate devices in the support apparatus.
Could someone help me please how to get the names of the devices supported by the OS 5.0.
Thank you
Arindam
Hello!
You can choose the version of the firmware and by which devices expected to be filtered so the devices in the list are supported by your selected operating system.
Hope this has helped.
-
New developer help required with error messages
Hello
I'm new here and just start with the development of Blackberry. I have some experience in programming, primarily in VB but also some HTML/CSS and am familiar with most of the concepts of programming.
I installed the BB JDE 4.7.0, and am running.
I started following this YouTube HelloWorld example to get myself started
http://www.YouTube.com/watch?v=e6NhObYV1js
Everything was going well until I have compiled the application, then I got an error message. (My problem is the 1) I don't know what means the error message and 2) I don't know how to find out what means the error message. I suspect, it can be linked to my installation of the software, but I'm not sure.
I would be grateful if someone could put me on the right track with these two problems (IE help me solve this problem and also to direct me to how to help myself next time).
Here is my Code
/* * HelloWorld_main.java */ package cs456_s09; import net.rim.device.api.ui.UiApplication; import net.rim.device.api.ui.component.LabelField; import net.rim.device.api.ui.container.MainScreen; /** * */ class HelloWorld_main extends UiApplication { HelloWorld_main() { MainScreen pScreen = new MainScreen(); /*create new main screen */ pScreen.setTitle("Hello World Title Bar Title"); pScreen.add(new LabelField("Hello World")); pushScreen(pScreen); /* push the screen onto the main stack */ } public static void main(string args()) { HelloWorld_main pApp = new HelloWorld_main(); /* creates new instance of app */ pApp.enterEventDispatcher(); } }
Here is the error I get trying to complete the construction.
Building HelloWorld
C:\Program Research In Motion\BlackBerry JDE 4.7.0\bin\rapc.exe-silencieux import ="...... \.. \.. \Program Files\Research in Motion\BlackBerry JDE 4.7.0\lib\net_rim_api.jar"codename = HelloWorld HelloWorld.rapc warnkey = 0 x 52424200; 0 x 52525400; 0 x 52435200 "C:\Documents and Documents\RIM\HelloWorld_main.java c.
I/o Error: CreateProcess: javac - 1.3 source-target 1.3 - g - O-d C:\DOCUME~1\LOCALS~1\Temp\rapc_588f7fec.dir - bootclasspath "...-..." \.. \.. \Program Files\Research in Motion\BlackBerry JDE 4.7.0\lib\net_rim_api.jar "-classpath"...... \.. \.. ' Error 'C:\Documents and Documents\RIM\HelloWorld_main.java c' \Program Files\Research in Motion\BlackBerry JDE 4.7.0\lib\net_rim_api.jar "= 2
Error while building project
Thank you. I thought it was related to the installation, but needed to be sure. I uninstalled everything, but have not had time to try once again
-
Can someone help me with C++ headers for after effects Plugins?
Can someone help me understand this piece of the plugin header
* BTW it is used in the SDK of AE 2015 *.
He began to make sense and then I just lost myself
==============================================
Enum {}
PORTABLE_INPUT = 0, / / default input layer
PORTABLE_SLIDER,
PORTABLE_NUM_PARAMS
};
Enum {}
PORTABLE_DISK_ID = 1
};
typedef struct {}
A_FpShort slider_value;
} PortableRenderInfo;
#define PORTABLE_MIN 0.0
#define PORTABLE_MAX 200.0
#define PORTABLE_BIG_MAX 200.0
#define PORTABLE_DFLT 10.0
#define SLIDER_PRECISION 1
#define DISPLAY_FLAGS PF_ValueDisplayFlag_PERCENT
extern "C" {}
This code snippet is just defining some constants that get used later, whether it's a macro (#define) or within an enum. It allows you to easily change the value (of, say, PORTABLE_MAX) in one place, rather that at each place, it is used. It is always advisable to define some constants naked symbolism rather than as numbers. Assuming that the name of the symbol is right, that this help really make the code more readable.
Typedef struct defines a structure that can be recorded and transmitted between the functions.
It's pretty basic C, not even using all the C++ features. Search on Google for '#define c' or 'c enum' or anything that will lead you to the tutorials explain these things in (probably too much) in detail.
Bob Currier
-
Help required with political relaxation user access allow IOM 11.1.1.5
Hi Experts,
My scenario is:
I have configured the SIEBEL OOTB connector with my 11.1.1.5.0 IOM
Note:
Siebel connector does not support the toggle feature to target siebel. He just create or delete the account. There not also "allow the user' and 'Disable user' of the tasks of the PD of the SIEBEL process.
My requirement:
(1) assumes that if I disable the user in the profile of the IOM, it should revoke account SIEBEL
(2) after that if I do user will allow IOM profile, it should again available SIEBEL RO.
What I did:
I created a user 'disable' in the definition of process of SIEBEL and the success of this I have called 'delete user '. So my revoke that happens after disabling the user profile of the IOM.
But once I do activate in IOM, the Siebel user profile only is not provsioned because Enable is triggering not available Siebel access strategy.
Can you please suggest what is the best way to implement "on Enable in the user profile IOM, how to set up a resource '?
Kind regards
JWell as long as you're not worried about the projected state wrong on the profile or as part of the audit; He would give you the hook to turn tasks.
-Marie
Maybe you are looking for
-
product ID / g2b26ea #abv: hard drive error
Hard drive test failed... system diagonsticsFailure ID / qbsbxs_000875_mfkr6j_60r203Product ID / g2b26ea #abv
-
I need help wiping my hard drive, so I can sell my computer
-
System event notification services error
A couple of weeks, I started getting a message at startup in VISTA. The message appears in the lower right. It is said:Unable to connect to a windows service. Windows could not connect to the System Event Notification Services service. This problem p
-
Heads of printing HP #88 #88 C9381A and C9382A
Where can I buy the HP #88 #88 C9381A and C9382A printheads in Manila? I need answers now. PLEASE, I BEG YOU.
-
Presario 5000 PC Windows XP Added a hard drive My CD/DVD drive is not detected.