Heads of printing HP #88 #88 C9381A and C9382A

Similar Questions

• How can I remove the footer and header view print?

  The function "file > config page" does not display the options to remove the footer and page header.

  This has happened

  Each time Firefox opened

  == I try to print

  If you want to remove the header or footer at all times (there is no user interface as in the layout under Windows or easily change) in Firefox under Linux, you can erase the preferences different values to get rid of both of them.

  Type of topic: config in the URL bar and press ENTER.
  If you see the warning, you can confirm that you want to access this page.

  Filter = header
  Each of these prefs right click and select Edit, then backspace or use delete to erase the characters - and then click OK.

  Repeat the same for the footer.

• Photosmart 3310 printing issue - apparently ink leaks and failures of alignment

  Hi, sorry to bother but I am facing a problem with an All - In - One Photosmart 3310.

  -I am running windows XP.

  -L' printer is connected to several for my private with band wifi LAN.

  N ' got no code error on the question

  -All used within the printer cartridges are genuine HP and photo paper was also 10 x 15 HP (the one provided with the packs of cartridges).

  -L' printer is a little over 4 years now and he has his crazy suddenly two days ago. The printer has not been moved or damaged, it simply sound suddenly started printing blue black & white text characters and ended with the ink.

  As I have already experienced similar problems with some other printers, I well as cleaning cartridges and lining up, but it has not changed anything. I finally changed all 6 white ink by new ones, but all the same. I cleaned again, tried to align, but once again, no possible way to achieve alignment. "Alignment failed" came out at this stage.

  Here are some pictures to illustrate because I tried several impressions to make sure it wasn't a short-term problem be resolved with cleaning or alignments: photo printer problem

  It should be noted that no two prints come out the same way, some are mainly blu, other yellow or green...

  At this point, I didn't Kow where to start with this problem. There seems to be a leak in the print head (assuming that the magenta) and another leak with the blue wire (it can not see on the pictures, located at the bottom of the left hand side, but could not get any pic suited because of the plastic on the printer cover.

  So, I'm wondering the following things:

  -What a sound suddenly went to the printer?

  -It worth repair?

  -How to proceed?

  Any ideas? Thanks in advance for reliable advice.

  Alignment is probably a failure because of the incorrect colors being printed on the page. The printer scans each line or section of the alignment page using a special sensor inside the printer and check all colors from ink and their bosses and investment. If one of them is not what the printer is expected to be, the alignment will fail. I don't know what film you're referring. But I don't think it matters, as the cause of the failure of the alignment is quite obvious.

  I don't think it's possible for you to do something to solve this problem. Take it to a service center would be a better option, cos they have the tools and the expertise and training to do such things.

  The upgrade process differs from one country to another. I'm not sure of European countries, but in the United States, you can call the support technology and upgrade to a new printer with similar features as yours. HP has TS lines for printers, which is very different from Smart Friend. You must pay any fees to call them and talk to them. If you are in the United States, call 1-800-474-6836 and choose Photosmart all-in-One printer as your product to be transferred to the printer Dept

• Music score print sharpening between 1280 HP and HP 7610

  When you print a musical score, apartment of the note heads also the sharpness of the moat (these lines) are of vital importance.

  So far my old (now regret dumped) HP 1280 did a great job on this topic.

  But after countless attempts, I can not say that when using my HP 7610.

  When those comparing stave lines printed by the HP 1280 and HP 7610, the scope of HP7610 lines, clearly show that small but always noticeable, a roughness (don't know a better word).

  I made the following comparison tests:

  1. I used the same music notation for the HP 1280 and the HP 7610 software.

  2. I used the same file for printing on HP 1280 and HP7610.

  3. I used the same printing paper.

  4. I use the same computer with the same operating system Windows 7.

  And yet there is a slight, but for me a noticeable difference in the sharpness of the lines in a scope.

  Printing HP 7610 showed some "hairyness" under careful review.

  My question is: can I adjust things in HP 7610 settings to get rid of this?

  Hi AnalogueMan,

  After some more research I found two solutions possible:

  • Try a different setting, like "Special media" to knock a little less ink.
  • Try the method of the other print driver. Please see this message, How to set other printer in different Versions of Windows drivers, by @Shane_R.

  I hope this will help you and have a nice day!

• Printer cannot remove a document, and there is nothing to print

  I have a printer wireless 5520. A few days ago, I sent three documents to the printer. For some reason, they would not print, so I cancelled them. The first document illustrates the "removal" as the status, but it did not change after days of trying, he recognizes the new documents sent to the printer in the print queue, but that a single document is still "delete". I reinstalled the printer driver, thinking maybe that was the problem, but I am at a loss to know what to do. I am ready to return to the printer in the retail store and buy another brand. I had the same problem with my old HP Photosmart J6240 printer and I recall it was a real trial make it print. If someone has had this problem and how did you solve it. I'm at my wits end with the season of taxes here and I need to print!

  There are a few things you can try if you encounter a problem with documents stuck in the queue.

  (1) try to print HP and doctor Scan.  It is an automated tool provided by HP to help solve this type of problem.  The PSDR HP is able to erase, stuck in the queue and more.  The PSDR HP can be downloaded by clicking here.

  (2) in addition, we can try to turn off the printer and manually restart the print spooler service.

  Open the run the command on the PC

  * Type "Net Stop Spooler" and press ENTER to stop the spooler service

  * Open again the run command on the PC

  * Type "Net Start Spooler" and press ENTER to restart the spooler service

  * Once the spooler was restarted, and then try to restart the PC to see if the jobs disappeared.

  Let me know how it goes.

• DeskJet 2546 b: Wireless print job stays in queue and poster printer offline after the upgrade to Windows 10

  I write a fix I found for a pretty annoying problem involving 10 Windows and HP wireless printers.

  My Deskjet 2546-b printer was printing OK wireless to the point 8.1 of Windows until that I upgraded my computer to Windows 10. Immediately after I upgraded to Windows 10, I could not scan, so I reinstalled the printer software and has worked for a day or two and then the printer would print not unless I restarted the printer or the computer - sometimes 2 or 3 times. This went on for a few weeks, sometimes it would be nice, sometimes, usually after the computer restarts, he would simply go offline. Once, he went offline 3 times when I was printing about 20 postage labels, recently he went 1 week without any problems.

  Long story short, after a lot of troubleshooting and to help a friend to HP, I found the problem to be associated with the WSD/service Port in Windows 10. My printer still maintains a stable connection with my Netgear router (wireless to the printer light stays on blue) and I was able to scan from the HP software and I could ping the printer... but printing would be just stuck in the print queue (the spooler service) and the printer showed offline in the queue, hardware and windows devices , or when printing from a program like Windows.

  I learned that if I went in devices and printers, until I sent a print job, if the printer showed offline, I could save time by restarting the printer simply and he would come every time (less painful) online.

  

  But it's just a solution and not a solution.

  Nothing worked... not even print and scan doctor. The final fix that worked was to define an IP address manually for the printer, and then I put the print driver to use a standard TCP/IP port.

  Here is the step by step. Your printer must already be connected to your network (solid blue on printer).

  Step 1: Make sure your printer uses a manual IP address

  (1) to obtain the IP address of your printer:

  • If your printer has a control panel with a menu, it's easy... Just look in the settings menu without wire/report and write your printer IPv4 address.
  • If your printer is not a menu of fancy and repower the computer and printer HP Print and Scan Doctor network menu display use (wireless), or you can connect to your router from a web browser (usually 192.168.1.1) and look at attached IPs (like me). Some printers can also print a report of the network when you hold down some buttons everything back up and running, but you will need to search the web site of the Internet or HP to find the process for your printer model - the report displays the IP Address of the printer.

  (2) once you have the IP address of the printer number, type this information in a web browser... like 192.168.1.x (where x is the last number of your printer)

  Web page of the printer should find - otherwise, use another browser (you can use a tablet or iPad if you want). HP has several different forms of printing of web pages (embedded web servers) depending on your printer model, but they all have a large number of parameters.

  (3) since the network tab or section, look for a manual IP address configuration.

  

  (4) suggest an IP address or type in a new.  I've personally used suggest and then replaced by the last number 241. You want to use a high number, something in the order of 240 to 250 to reduce the risk of problems caused by your router assign this number to something else on your network. Note the 4 digits for the new IP address manual, you will use them later.

  5) click apply and close the web page of the printer.

  Step 2: Make the print driver using the manual IP address of the printer

  Open the devices and printers in Windows, right click on your printing device and select printer properties. Follow the prompts to get the WSD port and on a new local port...

  

  1) click on the ports tab.

  (2) add the Port.

  (3) click on after the first screen, and then click new port type.

  (4) enter the IP address of the printer.

  (5) next.

  (6) select the new port.

  7) click OK.

  You have now two pilots displayed in the printers and devices window, you can now print... but you might not be able to scan and the HP printing software may not work as he might want to lets you add a new printer when you open it... If Yes, proceed to step 3.

  Step 3: Remove print devices and install a new one.

  Need to do this to get the software back HP synchronized so you can scan.

  (1) right click 2 print devices listed in the window of your printer and remove them by clicking on remove device.

  (2) open the HP printer Assistant software (from the icon on the desktop or you can search Windows by using the name of your printer).

  (3) installation/add a new printer... go fast and a new device icon is added to the printers and devices window.

  4) return to the printers and devices window and open the properties of the printer again for your printer icon.

  5) go to the ports tab (yet) and you'll see a new selected WSD port, select Port Standard, you created earlier in step 2.

  (6) you have now two print devices in the window (again), but now everything should work.

  These two devices alone from here on out. Do not remove one and everything should work fine. At least it worked for me. I hope it works for you. I'm hoping a Windows update resolves this problem soon, I see many people who cannot print or scan wireless after they upgraded - not just the stuff of HP.

• 7520 hotosmart only prints in shades of blue and black

  I'm so frustrated right now.  My Photosmart 7520 only prints in shades of blue and black, all the printer cartridges have ink. Why?

  In the paper here troubleshooting steps can help solve magenta and yellow print is not on your Photosmart 7520.  Be sure to go through all the steps in order.

• HP DeskJet F4140 printer range: hp deskjet F4140 and windows 10

  Help...  I had Windows 7Pro and in the month of August, I've upgraded to Windows 10.  The download went well. I haven't used my printer up to the

  the other day and it does not work.  I have download the newest player for the F4100 series and my impression still does not work. All lights light up and flies of ink cartridges back and comes several times and made all kinds of noises. I tried everything I can to find out what is wrong with the printer. But before I go and replace and I guess I would like to know if it is compatiable with Windows 10.  If it is then the printer is broken and I need to replace it.  Y at - it another Deskjet printer that uses ink 21 and 22 in number because I have 4 new ink cartridges? Could you please give model numbers so that I can buy a new printer. Thank you in advance for your help. SweetPea71

  SweetPea71, welcome to the forum.

  Here are the latest complete software and printer to the printer to win 10.  Once you install the software and driver, you must reinstall the printer.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Printer HP photosmart stopped scanning and desktop icon does not connect either

  I have recently switched to optical fiber for broadband connection.  I reset my printer to the new IP address and the fact that it is connected.  However I'm unable to scan.  I followed the procedures to help so I tried unplugging my firewall (not quite sure how but I disabled my security temporarily) but he has not yet worked.  I also tried double-clicking the desktop icon that is unresponsive.  Help!

  Hi there Sue!

  My next suggestion would be to uninstall the printer, restart the computer and reinstall.

  1. uninstalling the software of the printer (I recommend the method of control panel to uninstall)

  2. restart the computer to complete the uninstall

  3 Click here to download the complete driver. Once the download is complete, installation will start and then follow the on-screen instructions until the printer is completely installed. I hope that eventually you will be able to open the printer from your desktop software and start a new search.

  HP Photosmart full feature software and drivers

  I hope that works, my fingers are crossed for you!

  Let me know the results

• HP photosmart 6510: my bodyguard printer print Microsoft Windows support page and nobody asked him

  My bodyguard printer print Microsoft Windows support page and nobody asked him. Help!

  Hi twinec,

  Thank you for your answer!

  Please try our HP print and Scan Doctorand let me know what happens!

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this helps!

• 2840 AIO: aio HP 2840 print white or yellow, fax and copy is in color

  The printer prints white or yellow. Fax and copy is without any problem and in color. What can be the François for this dysfunction between fax/copying and printing.

  I try to imagine the proper name for it, but this point that does not is the solenoid that engages the carousel in position.

  This solenoid holds the stationary carousel while you print to any given color and then frees him then the carousel can turn a quarter turn it is necessary to get to the next color.

  What happens is that when the carousel does not lock out of position toner cartridge derivatives and none of the toner transferred to the intermediate transfer belt. Sometimes you get yellow is the first color of the 4 it sets for an image.

  What actually happens is the piece of foam rubber that is located between the arms of the solenoid and the solenoid deteriorates and becomes sticky and arm sticks to him instead of the carousel of locking in position.

  To fix this you will need to disassemble the machine where you can remove the solenoid and remove the arm from the solenoid, it's pretty simple when you look at it. Then clean the tarry residue and replace it with a very thin pen, you can get them at a dollar store, if you buy the high quality pads they are way too thick and the solenoid valve will not work. You have to have something between the metal arm and the metal Center of the solenoid or the residual magnetism that has developed in the metal causes the two parts together.

  You can find the service manual for this machine to: feedroller.com

  If my post is solved your problem and click the accepted as button solution under him. In order to thank a technician for a post click the thumbs up button under the post. You can even click on the two buttons.

• DeskJet F380: F380 - solution centre message 'Cut' to print but scanner is connected and working.

  My Deskjet F380 worked well but now, I get an error message when you try to print. Scanner is connected and works fine. Solution Centre message appears "Deskjet F300 Series offline!". Convenience store simply said ' turn on the printer!

  Can someone help please! I can't understand that only printing is disabled!

  Hey @AncientPrinter,

  I see that you have some problems with printing from your PC to 10 Windows for Deskjet F380 all-in-one printer. I can help with that.

  Here's what we will do:

  1. If the printer is connected to your PC via a USB cable, remove it.
  2. In your search type in printers bar and open devices and printers.
  3. Right-click on your printer icon listed.
  4. Click on remove the instrument.
  5. Repeat for all other icons printer listed.
  6. If you have removed the USB cable and plug. If not, click Add a printer to add to the queue new print.

  At this point, you should be able to print. If you are unable to do so, the next thing to do would be to start printing and scanning doctor. You can find the Print and Scan Doctor by clicking on this link. It will be either allow you to print, it will provide you with a list of questions, he found. If it finds all he couldn't solve the problems then please let me know what those who are.

  Please let me know if this allows you to print or if you have any other questions. If not, have a great day!

  If this solves your problem, then please help others find this post by clicking on accept as Solution on my post.

  If you appreciate my help, so please let others know by clicking on the icon below my post thumbs up.

• Cannot print to installed printers (HP3050A and HP7160) of the Windows 7 laptop

  Since the installation of software for HP3050A printer on my laptop (Windows 7 32 bit OS) while "seeing", will not recognize printer when sending to print. Message always reads the printer must be added. Since the installation of HP3050' software were unable to print on any other network or direct printers (HP7160), who had worked. Suspect Windows 7 OS has been damaged. Have reinstalled the HP software several times to nothing does not. All well on 2 other computers with Windows XP

  Hi Julie,.

  Uninstall the printer from Add/Remove Programs, and then install the full software functionality via the USB port. If you are unable to print, we consider that there is a problem within the operating system on the computer that helps the prints failed to the spooler. Let me know what you find?

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=al-91736-1&CC=US&DLC=en&LC=en&os=4063&Product=5061082&sw_lang=

• MS refuses to load software for printer Plug & Play, [Kodak ESP7] and Viewsonic monitor. MS = not signed?

  Recently, MS windos XP sp3 fails to recognize the common plug & play devices.  Says error message "software not signed" then demand load anyway?... I say yes, but the charger just an infinite loop, preventing the drivers to load.

  MS refuses to load software for printer Plug & Play, [Kodak ESP7] and Viewsonic monitor. MS = unsigned.  Was the load ok previously.

  This is how I have to upgrade?  I have five computers and two are 98 and 95 for some software.  That line.  TonyR

  The signed data are perhaps crushed or damaged on the HARD drive.

  Hello

  See this Microsoft KB article and check if that helps.

  How to troubleshoot unknown devices listed in Device Manager in Windows XP

  http://support.Microsoft.com/kb/314464

  When you install a device driver and Windows detects that it is not digitally signed, you receive a warning message and the option to cancel or continue the installation this message only appears if your computer is configured to display a warning message whenever an installation program attempts to install a device without a digital signature driver.

  Note A device driver is signed digitally can still be listed as an unknown device in Device Manager.

  For more information about driver signing for Windows, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/whdc/devtools/ddk/default.mspx

• Is there a difference through the add printer from the Menu then simply open the print server in the Explorer, and then right-click on the printer you want, and then hit?

  Add a network printer (add printer vs right-click-> Connect)

  Hey just have a quick question that I can't find anywhere.

  To add network printers is there a difference through the add printer from the Menu then opening just the print server in the Explorer, and then right-click on the printer you want and pressing on connect?

  Hello Doughty08,

  No, there is no difference. Both methods will install the same printer available driver and the two will work the printer even.