Help save

Similar Questions

• HP Recovery Manager - help save my backup files?

  Hello

  Then I turned on my computer this morning to find that he was unable to start. This is a good 4 years, so I expect that eventually heppen, although I had not backed up my files again.

  Anyway, my computer launches the HP Recovery Manager in which he tried to find the problem, and then he asked what I wanted to do then and there have been a number of different options but I don't remember what they were. In any case, I pressed on "backupp my files" and it lead me to the HP files backup. My files have finally been saved after a good few hours waiting, and now he asks me where to save them. The full size of the backed up files ready to be saved on an external source is 102,03 Go. I do not have the storage devices that are even close to this size - the greatest thing I have is a USB 8 GB - is this a problem?

  I inserted my USB and he recognizes her and says: "to continue, click Next", but I can't click Next, because it is sort of blur on, its not let me click on it... How do I?

  Do I have to buy a bigger storage device? I was just going to use my usb and backup 8 GB at a time, save them on my other computer, until all of the 102 GB has been saved. Is this possible?

  Help, please!

  Hi @Chloeb27

  Thank you for your response, I'm happy to help you!

  I see that you have created your backup and it is 102,03 GB and she's ready to put on an external device but you have only 8 GB USB.  When you have connected the USB key, he acknowledged but you don't have to click next because it is grayed out.  This is due to the size of the storage device.

  It does not save on the USB as it is too small to store the files.  I suggest you buy an external hard drive and then save that.  You can get one at most stores or places like Best Buy, Future shop, Wal-Mart or computer any store that would normally sales of computers.  If you have cloud storage that could also save in there.

  I hope this has addressed your concern.

• Help save indicés dance in circles

  I have a new HP desktop computer. 10 64-bit Windows.

  I am a leader of the round dance. I taped indicés towers because I went to years cd. If I'm sick or something I play the saved index towers.

  The voice and the music must be completely separate tracks.

  I have 2 audio cables shielded of Y. 1/8 passes in 2 cables separated with an RCA connector.

  1/8 on a single audio cable shielded of go in the speaker output.

  On the other 1/8 audio shielded cable go in the mic input.

  One of the RCA connectors coming from the speaker output connects with one of the RCA connectors that goes into the mic input.

  The other RCA connector coming out of the speaker output connects with a helmet. I have to listen to music when I spot the tower.

  The 2nd RCA connector that goes into the microphone input is connected to my amp.

  In sound setup windows Panel, record shows that I have music. I stop the music and speak into the microphone that goes to my amp which then connects to the 2nd RCA connector going into the microphone. The sound control panel shows I have her get into the mic input.

  Play music, I have sound. Stop the music and speak into the microphone, I have windows sound control panel.

  Enter hearing CS6, I have music without voice and music is on both tracks.

  I spend the music and the voice on the RCA connectors going into the microphone. In hearing CS6, I have voice but no music. Voice goes on both channels and should be on a single track.

  In the windows sound control panel. I listen listen to the music, does not speak in the microphone. shows that I have sound.

  I stop playing music and speak into the microphone, windows sound control panel shows I have sound.

  The two RCA connectors going into the 1/8 stereo Jack make it sound.

  He is unable to get both sides of the connectors RCA in the 1/8 going into microphone to have his hearing.

  Started with Cool Edit. Bought Adobe Audition 1, then upgraded to Audition 3 and now hearing CS6 running and always worked fine. Saved a lot of laps index years until what I switched to this new computer. Computers HP for years and first time was struggling to save indicés towers.

  I really need to fix this problem. should save a piece of music and voice the 2nd track. The two tracks completely separated.

  Thank you

  Frank

  You are right. I contacted Microsoft support and told me to make.

  I typed in the restoration in Cortana. Take clicked computer back to an earlier era.

  After this review of the hearing and it worked very well.

  Totally distinct music on a track. The music was completely different on a track. Now I can record music and voice at the same time.

  I found that I have not created a restore point.

  You could spread the word that create a restore in case of updates of Microsoft point.

  Problem solved.

  Thank you for your help.

  Frank

• Help save a progress in the form of parameter from the point of view of creators

  I use the trial of Adobe Acrobat DC, I create a parameter form to help prepare forms, but my form is four pages long and very personalized.

  How to save this configuration of the form so that I can change the location of these fields and change the tab index and others at a later time? Any savings I have seems to be for the distribution to the end-user, than save my progress and come back to finish creating the form of parameter at a later date.

  Thank you.

  When you save the file, close Acrobat DC and then reopened, the fields are not visible, which is why I thought it didn't save it in a way that I could change in the future. However, I see now that if I open again, then click on prepare forms fields appear and can be changed later.

• PSC 6 helps save as window

  I use Photoshop CS6. My window "Save as" is full screen, and I would he return to the smaller window as if it was. Can you help me to reduce the size of this window please?

  Mac: click the Green Resize button in the upper left corner of the dialog box.

  Win: double-click the title bar of the dialog box.  (The space to the left of the X close the symbol of the window)

  If it meets it, mark your question as "answered".

• Help save Progressive layers such as video or files

  Hi, I am interested in creating a video of animation with Photoshop. I have 80 + layers, each building on the last. For example, layer 1 is a simple horizontal line (-). Layer 2 is a simple vertical line (|). With two layers on, they form a cross (+). Layer 1 should be visible for layer 2 to make sense in the context of the video. Thus, each previous layer must remain visible when the next layer is enabled. Then the other, then the other.

  Previously, I have saved manually layer 1 as a jpg, turned on the layer 2 and saved the new file, turned on layer 3, recorded the following new file and so on, until I go through all the layers. Then, I used video editing software to put files in order and make it as a video.

  I'm hoping that PS (CS5) can help me. I need to make a video with each layer light (perhaps a delay seconde.03, as in the band of the animation), but with all the previous layers standing on. Maximum layers of onion skin is 8, so this does not work for me.

  If I can't make the video directly from PS, how can I create an action that will

  1. save the file without displaying message in jpg with the name of the layer as the file name in the directory where resides the PSD file

  2. making visible the next layer upwards (or downwards, whatever)

  3. Repeat until all layers are complete, no matter how many layers

  Try this.  keep all the layers in a single file with the last layer you want to 'turn on' at the top.  Turn off all the layers except the bottom layer visibility.  Remove any current timeline or animation fram, but open the window of limeline or the palette.  Run this script in the attached link.  It will create a new image for each layer in your document.  It will not detect layers in groups, in order to keep all of your layers to a certain level.

  https://files.Acrobat.com/preview/c86cb04f-65bb-42d7-B8de-6771c9d22a58

  Edit: once you get all created frames, you can always convert to a sequence of editing and add transititions etc.

• I need help save?

  Every time I try and save a project, it won't let me it says cannot record here, please choose another. Well, when I choose another he says the same thing.  I really need help.

  You may need to reset your preferences to the default settings.

  Press and hold the keys Alt + Ctrl + Shift (Windows) or Option + command + shift (Mac OS) you launch Photoshop. You are prompted to delete the current settings.

  (Mac OS only) Open the Preferences folder in the library folder and drag the Adobe Photoshop CS settings folder to the trash.

  New preferences files are created the next time you start Photoshop.

• Helps save as javascript (tiff compression options)

  Hi can someone please help me change this script to "psd" in "TIFF". I would like the script to specify particular compression options and I don't know how.

  var saveFile = new file ('~ / desktop /'+ (new Date () .getTime () m:System.NET.SocketAddress.ToString ()) + '.psd');
  app.activeDocument.saveAs (saveFile);
  app.activeDocument.close (SaveOptions.DONOTSAVECHANGES);

  The compression options I want are as follows

  TIFF (8 bits)

  Image compression - quality JPEGG 10

  Layer of Compression - ZIP

  OK Thanks Paul. I'll read and have a think about. Just before closing the discussion, you would give me guidance on the best method of compression scriptable? I don't mind frozen, but need to keep the layers and the color profile. Small best for ftp.

• Where is the installation of the previous version, which helped save the content and saute upward during the restart, is no longer available?

  During the closure of Firefox version 4 it "just closes", no option to save the displayed pages or multiple windows in... alternative now use to 'crash' the computer as the installation of "restore" then click in but frankly it is a bad option... Please bring back the option 'Save' and will bring up when the next time you use Firefox...

  Firefox 4 saves the previous session automatically, so it is no longer necessary for the dialog box asking if you want to save the current session.
  
  You can use "Firefox > history > restore previous Session ' to get the previous session at any time.
  
  There is also a button 'Restore previous Session' on the default on: Home home page.

  Another possibility is to use:

  • Firefox (Tools) > Options > General > startup: "When Firefox starts": "show my windows and tabs from last time '.

• Need help save a Dj Mix on Satellite C670

  The C670 Satellite 14 p have an online option via the microphone/headphone jack.

  The problem is trying to record a mix of dj with a recording program, but whenever a recording is made, it seems that it is registered by the speakers of the laptop and not by the sound card. I have my mixer plugged into the laptop using a phono to jack 2.5 lead I have the microphone and headphones catches but is makes no difference to the sound.

  Can someone help me please.

  I put t know what do you mean with line-in on the mic socket. The fact is that you can connect the headset or similar microphone to this Jack and use it for conversations on Skype or any other messenger. You can also use it for voice recording using sound recorder in Windows and it works perfectly.

  I put t know exactly what you do and device you want to transfer this mixture is not easy to help.
  Can you please post more information than you do, exactly? You can connect to this unit using the USB port?

• Actions help: Save under which allows me to change the name of the file

  I have been trying to research how to do this, but don't have happen to a good part. I had both on an earlier version of Photoshop got it works but I don't remember exactly how I did it. I want to have my action to change an attribute of the file and then save as window come in the given folder so it allows me to change the file name before saving. Any wizard would be fantastic.

  Click on the dialog box in the palette of next action save as.

  

• Help save the number of computers!

  I hope that I can help.  I have Photoshop Elements 9 and Prime Elements 9.  I'm on my second installation (only two permit drive) and my last laptop exploded.  I seriously need to upgrade to a new PC which I bought today but don't know if there is a way to transfer my installation in my current PC or remove and install on my new machine.  I really appreciate your help.

  See you soon,.

  Rich

  You have 2 options: -.

  (1) contact Adobe technical support and get the activation reset for software to use on 2nd computer

  (2) disable and uninstall the PC software that is very slow and then install it on the new computer. By disabling work PC will maintain avtivation County and so you will not face the question about the installation on the new computer.

• Help save images - drives me crazy!

  Hello

  I've created a banner for a website in photoshop CS3 in windows and it looks perfect on the screen - I made sure the image is 300 DPI and then recorded for the web and devices at the top and made sure the pixel sizing is right and then when it comes out on the screen on the website it is fuzzy and blurry. I also tried this non-use save for web, but just save it as a JPEG at the top - that anyone has any suggestions? is there something important, I am doing wrong?

  Thank you

  Z

  I think it's very pretty. I think it's the outer glow, giving it a look blurry, but I really don't think it's fuzzy. What you could try is instead of an external light, you can try a shadow under the text. You're still all of your layers?

• Download windows XP to the existing help save the key.

  I have recorded the version of windows xp home edition, but did not have the cd with me right now. However, I need to reinstall my operating system. Download Setup using my product key? Please give me the download link.

  Sorry, but there is no download available for Windows XP.  You will need to find your original Windows XP CD.

• Satellite M100 - is a disabled firewire port saves battery power?

  Hey everybody

  I'm not so IEEE...
  If I disable firewire in Device Manager it will stop it and it will help save the battery?

  Hi Dmitrij

  I doubt that disabled firewire port will help to save the battery.
  If you want to save battery power, you should check the options and settings of Toshiba Power Saver.

  Check the HowTO document
  + How to configure my computer for optimal use of battery? +
  You can find it in the Forum s box HowTo.

  If you are using Vista, then I recommend that you check the Vista power settings.
  More details you will find in "HowTo" doc:
  + How to manage Windows Vista power management features? +

  See you soon