Help set up a private network
Hello
VMWare Workstation 7 on host operating system
I have Win 7 host operating system.
I have Ubuntu ONE as a Guest OS 1
I have TWO Ubuntu as a Guest OS 2
Network requirement:
Win 7 should be able to ping/connect through any port to the TWO Ubuntu and Ubuntu ONE
Ubuntu ONE should be able to access the Win 7 AND Ubuntu TWO, through any port (ping, etc.)
BOTH Ubuntu should be able to access the Win 7 AND Ubuntu ONE, through any port (ping, etc.)
Ubuntu ONE and TWO Ubuntu may not be able to access the external network (internet) (available on Win 7)
Win 7 must be able to access the Internet outside
I managed to get the communication by using a NAT, but OS guests are able to access the external network (in addition to being able to access the host)... How doesn't prevent it from being able to access the host (internet) outside, but still be able to access the host?
Thank you!
I have no problem of connection between the host and the guest (s) and vice verse using host-only and it's the VMware virtual network type for the system requirements, you have presented.
Say "was also unable to connect to customers" without development let us do anything so all least, we need to see what follows.
The output of the ipconfig/all command command on the host and the guests.
Copy & paste the following commands, as is, and then press ENTER...
On the host computer in a in a command prompt. (Start > all programs > Accessories > prompt)
ipconfig /all > "%USERPROFILE%\Desktop\host_ipconfig.txt"
This will create a file on the desktop of the host named host_ipconfig.txt
On the guests in a command prompt. (Start > all programs > Accessories > prompt)
ipconfig /all > "%USERPROFILE%\Desktop\guest_ipconfig.txt"
This will create a file on the client named guest_ipconfig.txt Office
Archive (compress) the original files in a single zip file archive and attach to a response message.
Note: Do NOT copy and paste it to the output of the ipconfig command control directly in the body of the response rather archive (compress) the new files in a single zip archive and attach to a response message.
Note: When the network connectivity test if need be temporarily disable all firewall, AntiVirus and security type software while testing and then reactivate as needed.
With the firewall, temporarily disable the AntiVirus and software and using the appropriate VMnet1 IP address of the host and the guests what systems can ping each other?
Tags: VMware
Similar Questions
-
I need help setting up my home network - windows vista.
I need help to configure my network, I ave a laptop & hubby the computer w / dsl wireless rouuter. If I can get trhis to work, maybe we can work on the printer.
Original title: help w / home network
Hi Luvy,
Thanks for posting your query in the Microsoft Community Forums!
Looks like you need information to set up home networking on the windows vista computer.
We're here to help and guide you in the right direction.
-What is the number of brand and model of the computer?
I suggest you to return the items online help and check if it helps.
Setting up a network home
http://Windows.Microsoft.com/en-in/Windows-Vista/setting-up-a-home-network
Setting up a wireless network
http://Windows.Microsoft.com/en-in/Windows-Vista/setting-up-a-wireless-network
To install the printer on the network see Help below articles.
Install a printer on a home network
http://Windows.Microsoft.com/en-in/Windows-Vista/install-a-printer-on-a-home-network
Share a printer
http://Windows.Microsoft.com/en-in/Windows-Vista/share-a-printer
It will be useful.
Let us know if you encounter problems under windows in the future. We will be happy to help you.
-
I need help setting up a home network
I have a 7 m DSL connection. Using a modem without phone/ethernet gateway serving a computer office wired ethernet and a wireless laptop, I would like to know if I should put in place a network home ethernet and add a wireless device or I set up a wireless network and add a wired ethernet device. Two computers use Vista Home Premium 64 - bit OS. I have 1 printer and a XBox (wired) and a (wired) DirectTV receiver attached, too.
What is the brand and model of your wireless/ethernet modem access point? It should be able to provide any wireless networks and wired Ethernet network.
Wired Ethernet ports how do I need? If she has enough for all computers and devices that you want to network, you're ready. If not, connect a wired Ethernet switch for more ports.
-
Set up a private network (home) in Win7
I have a desktop running Win7 connected to a router LinkSys wrt54g wireless connected to a modem DSL Actionec.
I have a portable remote under Win Vista and connected wireless.
To see the laptop and can access the folder and print desktop resources.
The desktop running Win7 however has no link in NETWORK CENTER and SHARE (WHY?) when even the Office can access the WEB but not the laptop files. In ADDITION, selecting the WHOLE MAP in NETWORK CENTER and SHARING makes appear a House with office network map, computer laptop and wireless router connected to the Internet, BUT with a RED X between the router and the Internet icon.
The machine is configured as a Public network (I don't know why) and cannot be configured as a network without an available connection. Any HELP is greatly appreciated.I could solve the problem above. Unfortunately, I'm not sure what resolution I used. I lost my story when I upgraded to IE 9 beta. I run one of the following commands and restarted my computer and it started working correctly:
net localgroup "Administrators'"NT Authority\Local Service"/ Add
Net localgroup administrators localservice / addYou will need to run the command as an administrator.
I hope this helps.
Dean
-
Help setting up of a network of schools, libraries
Last year, the libraries in PS and AI ID panels were 'not available' - or users connect with an Adobe ID to access it. Adobe CC is networked through the building in the HS and students do not have individual adobe ID. I am the art teacher - not the tech - and does nothing the software installation / implementation of the image of district / or network. I'm reaching out for more information as well as enough time before September, which could be useful to transmit to the Director of technology - the issue never resolved last year. Does anyone know if there is a way to implement the libraries so that individuals who connect on different machines will have access to the libraries? Thank you very much
Contact support - for the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache. If it fails to connect, try to use another browser.
Creative cloud support (all creative cloud customer service problems)
http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )
-
Shairng private network file - files are not properly sharing
I am a small business owner. I set up a private network. Instead of sharing in the 'Public' folder, I identified individual files and does the work to ensure the sharing of files. The files are "marked" as being shared in the network and sharing Center files appear when I click on "Show me the folders and files that I share", but when entering the network, the files are not displayed.
Protection options password for account currently OFF sharing. Other sharing (print, media, CAD drawings) work.
How to solve this problem?
We have a laptop running Windows 7. two laptops and two desktops running Vista. All versions are Home Premimum and basically serve us well.
Hello
You must open a new folder under the main hard drive (or any disk storage) (you can also add void structure of folders for) and share the new folder as a whole. and leave only the public folders. Move the relevant files to the new folder structure.
Maybe this can help more.
-- ---------------------
This message looks like a long history because I don't know what is the level of knowledge of the user, and what has already been done.
The info goes through the motions of the configuration and verify most of the common aspects of the functionality of Windows OS' LAN.
----------------------
Win7 when configured on the peer-to-peer network has three types of configurations of sharing.
Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.
Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
Public share = network Public (as Internet Café) in order to reduce security risks.For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.
http://www.ezlan.NET/Win7/net_name.jpg
Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions
General example, http://www.ezlan.net/faq#trusted
Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .Since you have a network with Win 7 and the other version of Windows, you must configure Windows 7 as work network.
In the center of the network, by clicking on the type of network opens the window to the right.
Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.
http://www.ezlan.NET/Win7/net_type.jpg
Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm
Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx
When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.
-------------
If necessary check specifically Permission/security settings.
Point to a folder that wants to share do right click and choose Properties.
In the properties
Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.
This screen shot is to Win 7, Vista menus are similar.
http://www.ezlan.NET/Win7/permission-security.jpg
The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.
When everything is OK, restart the network (router and computer).
Please note that the users and groups listed on the screen shoot are just an example. Your list will focus on how your system is configured.
---------------------
* Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
need help setting up a network for a game
We tried to use a router and its not working! do I need anything else?
Hello CrimsonZombie,
Thank you for posting. It seems that you are having some type of evil, but you left a little certain information.
To help you, I would need to know a few things:1. what version of Vista (32-bit or 64-bit)
2. what game you're trying to read
3. are you a homepage of the network or need assistance to set up a home network
Please let me know these things, so that I can be a help to you more. Zack
Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think. -
Twice NAT on Site at the tunnel with the same private networks.
Hello
Currently, I am trying to configure a Site to Site tunnel between an IOS router and an ASA 5505 running 9.1
When deprived of the IOS router subnet was 10.0.0.0/24 and the subnet private SAA was 172.16.1.0/24, it connected properly.
I'm now putting in place where the two private networks is 10.0.0.0/24 and objects network created, edited the ACL for interesting traffic and created the rule of NAT translation and twice, but the tunnels are not coming. I was hoping someone could shed some light on where I'm wrong.
There are route it (R1) IOS and ASA (F2). Between them is an Internet addresses asking the router which is just set up to allow both sides to achieve their WAN.
R1 and F2 have private network (10.0.0.0/24) need to communicate. Twice NAT can be done on the ASA to allow this, but I have to do something wrong. The way I understand it, is that the R1 should see traffic coming from 10.51.0.0/24 and send to this traffic. The ASA will have this traffic and the inside network should see it coming entering as 10.50.0.0/24. If F2's private network communicates with 10.50.0.0/24, and the private network R1 sends traffic to 10.51.0.0/24.
I turned on "Debug crypto ipsec" and "debug crypto isakmp" but no output is appear or give any indication that she is trying to establish anything.
Any help would be greatly appreciated! Thank you!
R1 #show run
version 12.4
hostname R1
crypto ISAKMP policy 50
BA 3des
preshared authentication
Group 2
address of cisco crypto isakmp 10.2.0.254 keysCrypto ipsec transform-set esp-3des esp-sha-hmac L2L_SET
50 CRYPTO ipsec-isakmp crypto map
defined by peer 10.2.0.254
game of transformation-L2L_SET
match address CRYPTOinterface FastEthernet0/0
10.0.0.253 IP address 255.255.255.0
IP nat inside
IP virtual-reassembly
IP ospf message digest authentication
Cisco IP ospf authentication key
automatic duplex
automatic speedinterface FastEthernet0/1
IP 10.1.0.254 255.255.255.0
NAT outside IP
IP virtual-reassembly
IP ospf message digest authentication
Cisco IP ospf authentication key
automatic duplex
automatic speed
Crypto card CRYPTOIP classless
IP route 0.0.0.0 0.0.0.0 10.1.0.253
IP route 10.2.0.0 255.255.255.0 10.1.0.253
!
!
IP http server
no ip http secure server
overload of IP nat inside source list SHEEP interface FastEthernet0/1
!
IP extended CRYPTO access list
Licensing ip 10.0.0.0 0.0.0.255 10.51.0.0 0.0.0.255
SHEEP extended IP access list
deny ip 10.0.0.0 0.0.0.255 10.51.0.0 0.0.0.255
allow an ip=========================================================================
See the F2 # running
: Saved
:
ASA Version 9.1 (1)
!
hostname F2
activate 3a57ZsZ4Kgc.ZsL0 encrypted password
3a57ZsZ4Kgc.ZsL0 encrypted passwd
names ofinterface Vlan1
nameif inside
security-level 100
IP 10.0.0.254 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP 10.2.0.254 255.255.255.0network of the PRIVATE object
10.0.0.0 subnet 255.255.255.0network of the PARTNER_PRIVATE object
10.0.0.0 subnet 255.255.255.0
network of the PARTNER_VPN_INBOUND object
10.50.0.0 subnet 255.255.255.0
network of the PARTNER_VPN_OUTBOUND object
10.51.0.0 subnet 255.255.255.0Access extensive list permits all ip a OUTSIDE_IN
CRYPTO extended access list ip 10.0.0.0 allow 255.255.255.0 10.50.0.0 255.255.255.0NAT static (inside, outside) PARTNER_VPN_OUTBOUND PRIVATE destination static source PARTNER_PRIVATE PARTNER_VPN_INBOUND
!
network of the PRIVATE object
NAT dynamic interface (indoor, outdoor)
Access-group OUTSIDE_IN in interface outside
Route outside 0.0.0.0 0.0.0.0 10.2.0.253 1
outdoor 10.1.0.0 255.255.255.0 10.2.0.253 1
the ssh LOCAL console AAA authenticationCrypto ipsec transform-set esp-3des esp-sha-hmac L2L_SET ikev1
Crypto ipsec pmtu aging infinite - the security association
crypto L2L_MAP 50 card matches the address CRYPTO
card crypto L2L_MAP 50 set peer 10.1.0.254
card crypto L2L_MAP 50 set transform-set L2L_SET ikev1
L2L_MAP interface card crypto outside
trustpool crypto ca policy
Crypto ikev1 allow outside
IKEv1 crypto policy 50
preshared authentication
3des encryption
sha hash
Group 2
life 86400tunnel-group 10.1.0.254 type ipsec-l2l
IPSec-attributes tunnel-group 10.1.0.254
IKEv1 pre-shared-key *.object network PRIVATE
subnet 10.0.0.0 255.255.255.0object network PARTNER_PRIVATE
subnet 10.0.0.0 255.255.255.0
object network PARTNER_VPN_INBOUND
subnet 10.50.0.0 255.255.255.0
object network PARTNER_VPN_OUTBOUND
subnet 10.51.0.0 255.255.255.0access-list OUTSIDE_IN extended permit ip any any
access-list CRYPTO extended permit ip 10.0.0.0 255.255.255.0 10.50.0.0 255.255.255.0nat (inside,outside) source static PRIVATE PARTNER_VPN_OUTBOUND destination static PARTNER_PRIVATE PARTNER_VPN_INBOUND
Here in nat rule u use subnet PARTNER_PRIVATE, which is the same as a local, so the devices never send this traffic to the ASA, cause they know that this subnet (10.0.0.0/24) is in their local subnet. Therefore, you must write the nat rule in this way (i.e. the change of objects Web places):
nat (inside,outside) source static PRIVATE PARTNER_VPN_OUTBOUND destination
static PARTNER_VPN_INBOUND PARTNER_PRIVATESo the hosts on the subnet behind ASA will see the hosts on the subnet behind SRI as 10.50.0.0/24 and trying to reach the subnet behind SRI, you must use the 10.50.0.x one-to-one wich addresses correspond to 10.0.0.x it.
In addition, your proxy-acl on asa must use post-nat addresses, which should look like this:
IP 10.51.0.0 allow CRYPTO access list 255.255.255.0 10.0.0.0 255.255.255.0
-
WLC 4400 not authetnicating between the COMMENTS and private networks
Hello
I have a problem. I have a 4400 WLC and the meeting I m problem is that when an authetnicates of user to the private network, then tryies to autheticate the guest network, it just stays there, it does nothing. All around, if authenticate you with the network of comments and change the private network, it just sits there. I have showing that the problem is with the authentication, but do not know if I m correct.
Can someone help me? What ifnormation will take to recover from the WLC see there the rub?
I'll get the debug mac addr
and repeat the question to see if I get anything for the customer. Thanks for the help
Tony
I would check if his blocking on obtaining IP address or authentication. Probably try to manually set the IP address if you switch between networks and see if works.
-
Choose a profile Public or Private Network?
Am I right in thinking that the more secure option for a network is Public in windows 8?
Only, I have a PC desktop that is connected to a router and a printer.
Installing Windows missed me a private network setting. Should I change this in a framework of Public network or is it not really necessary?
Am I being too cautious?
Hello
Means of private connections you'll have some active options by default for example sharing file and printer sharing, private means that you do not. It is recommended to use private house connections to ensure when you buy another system they can reach eachother.It is recommended that use you Public in cafes, trains, McDonald's and so on, to ensure that nobody can open a connection to your system and look at your files.So in theory I would say that the private home use, there is no need to worry about the aslong that others do not have access to your network, which they shouldn't have...Hope this helps youYuriThis is my own opinion and does not reflect the opinions of others. -
How to configure the private network interface between two VMS os invited using red hat linux
Hello:
I'm trying to set up a Real Application Cluster on my home office so that I can install Oracle 11 g RAC which is a facility where you have two servers accessing the same shared of storage (chipboard).
In addition they will have a network interface private and a public network interface, so it will be for public interface eth0 and eth1 for interconnection of private networks.
I read that I can set up using VMWare server, create Virtual Machines and install the operating system invited to them.
I intend to install Red Hat Linux guest OS.
My question is basically, how can I do for the establishment of the private network eth1, will be the guest OS to automatically install the sense (do I need to have 2 NIC cards for this), or where and how can this be configured?
Also, how these two speeches of Virtual Machines to another on the private interconnect?
And is it possible to use DHCP or do I need to add the IP addresses manually?
Very grateful for your contribution to this topic, thank you.
Kind regards
Sam
You can have network private without assigning a NIC cards (adapt).
Hope this helps
-
I have a user not allowed on my private network.
I have a user not allowed on my private network. With the help of Apple Care, I reconfigured my network and changed all the passwords on Sunday. How it made access to my network and how can I get him off?
A second pressing the reset button of the router airport anyone will allow 5 minutes of free access to go into the settings of your router AirPort and change all the settings or passwords they want, so the user "unauthorized" is someone who has physical access to the AirPort base station.
You will have to lock the router AirPort allows no not physical access to the product except you.
In the meantime, make sure that the basic Station and wireless network password are not the same. Give the password for the Base Station to a person that you want to allow access to the AirPort router passwords and settings.
The bottom line, unfortunately, is that 'security' on a router from Apple is pretty much of an illusion.
-
Set up a wireless network on EA60-155
I have laptop EA60-155 A60.
I have trouble to set up a wireless network between my desktop and my laptop.
My office works well online via a network of 576 Thompson router. I use a BT Voyager 1060 portable card in my laptop, but the two will not connect. Can anyone help?Hello
as a first step, he must set up a connection between the laptop and the router. Now, the two computers are in the same network. They can see each other in Solution Explorer if they are in the same workgroup. You can change the Working Group in the Control Panel, System.
Good bye
-
I just got my laptop all cleaned and had everything updated. When I got it back I was mainly concerned how my network and discovery sharing would work, because we never had a home computer and a laptop computer at a time. Our PC at home has always defined for a private network. Today, they are both defined for the private sector, the laptop will probably always be at home too, but I was curious to see how the printer share everything would work on my laptop. It would not print and I checked just the settings that the guy I of any program for me usually had the top settings. On my laptop that I was first checking out and the network discovery has been to custom on both, one on my PC was on, laptop has never been verified we or off, file sharing has been enabled on both. public folder sharing off on both, printer sharing turned off the PC at home, but on laptop, so much time, I guess me to turn on the PC I don't know yet. Printer password sharing is on the PC and laptop. I try essentially whether it is what you would call a custom setting make for a firewall setting, or could someone please just kinda tell me if the sharing of network discovery should be turned on on the laptop and the PC, or was it not suppose to be turned on to the laptop, but on the PC only? Which should be lit and which should not be enabled in the configuration of the private network? I just want to be able to print my laptop if I want to. Thank you
[Moved from the community centre of Participation]
Hello
What version of Windows are you using?
This article was written for the two Windows Vista & Windows 7. Drop-down menu (right) allows you to activate Windows Vista Instructions.
http://Windows.Microsoft.com/en-us/Windows/install-printer-home-network#1TC=Windows-7
-
Hi there tried to hook my laptop up to wireless as ethernet cable keeps me tripping. I am complete technophobe and propably have the only laptop that gets used especially to open the door.
Have tried everything I can think even threaten her with glass of water after trying to connect to the wireless network, that it is said that there is something that doesn't work not with the driver if it means something to you. I have a toshiba, if it helps.Thank youoriginal title: I hope someone can help technophobeIt is said that there is something not working only not with the driver
You probably need to install some network drivers for your wireless card.
Download drivers
Visit the manufacturer's Web site and select your computer model (this is usually done in the Support section). You should be able to download drivers for your model. Download the driver (s) and follow the instructions to install - every computer is different, so I can't give you exact directions. You can also try to use Windows Update to get drivers - it is located in the start menu.
Update of the hardware driver that is not working properly:
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Establishment of a network domestic:
http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-home-network
For more information network:
Start here to set up a home network in Windows 7:
http://Windows.Microsoft.com/en-us/Windows7/start-here-to-set-up-a-home-network-in-Windows-7
What do I need to connect to Internet:
http://Windows.Microsoft.com/en-us/Windows7/what-do-I-need-to-connect-to-the-Internet
Adding a wireless computer
Set up a wireless network:
http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network
If your network is wireless, run the wizard to Set Up a network on the computer attached to the router.
1. open Set Up a network by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center click on set up a new connection or a network and then click on set up a new network.
2. the wizard will guide you in the process of adding other computers and devices to the network. For more information, see:
http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network
Manually add a wireless computer
1. sign the computer.
2 open the connect to a network by clicking the network icon in the notification area.
3. choose the network wireless from the list that appears and then click on connect.
4. type the network security key or password if you are prompted to do so, and then click OK.
-You will see a confirmation message when you are connected to the network.
5. to confirm that you have added to the computer, follow these steps:
-Open network by clicking the Start button, then Control Panel. In the search box, type network, and then, under center network and sharing, click on view network computers and devices.
Maybe you are looking for
-
matter of logic external midi instrument
Hello MacBook pro connected via the usb Korg Triton rack interface. Whenever I press a mouse click or key in the X one logic note random sounds of the triton. Triton works very well isolated outside the logic, so I guess that each press of button i
-
Firefox 41.0, win 10 Pro x 64.Recently (possibly before v.41) pages Firefox hang with very low cpu on some sites.Firefox itself is not hung, but for this tab, the indicator of the clock continues ticking.I open the problem while another tab has the p
-
Groups Yahoo emails do not show the name of the sender
When you receive emails from my Yahoo Group address "' displays only the name of the group without the sender's name. This just started happening in the last days.
-
Quick turn on the radio connection during transfer or receive a file from other devices
Original title: BlueTooth menu Original title: I just wanted to ask Mr President. Hello I have a problem with my bluetooth menu, I can not transafer or receive a file from some other device, when I try to transfer a file it says the radio connection
-
Message received from uncertain source.
I just got a message through Skype. Before I Act on it, how can I determine whether or not it is legitimate, or just some kind of hoax? Thank you._____________________________ ******************************************NOTIFICATION OF URGENT SYSTEM