Help Setup WPA2-Enterprise on WRT-160Nv2

Similar Questions

• WPA2 Enterprise signed vs self-signed certificate

  Hello

  What are the risks by using a self-signed certificate on an OS X Server RADIUS client using WPA2-Enterprise?

  The biggest risk is teaching your users to ignore certificate warnings.  But tell all to ignore your warnings cert will be likely to train people to ignore all the warnings, possibly opening security threats.  For non-technical users, it's a bad habit to enforce.

  The cost of a valid certificate is not terrible.  If you have decided to build a wireless infrastructure secure by using certificates and RADIUS, buy a real certificate.  I hope this helps.

  Reid

  Apple Consultants Network

  Author - "El Capitan Server - Foundation Services.

  Author - "El Capitan Server - Collaboration & control»

  Author - "El Capitan Server - Advanced Services '.

  : IBooks exclusively available in Apple store

• "Unexpected error" occurs when you try to create a network with a security profile wpa/wpa2 enterprise

  I recently started using Windows 7 x 64 and I'm unable to create a network with WPA2 - Enterprise Security profile.  I have a wireless card for Intel PRO/Wireless 3945ABG with 13.0.0.107 driver version.  I have had no trouble to create this network in Vista Ultimate x 86 profile, and I do not know what is causing the error.

  I went through the steps to create a network profile:
  1 'Add' a network profile
  2 ' manually create a network profile '.
  3 name the profile, and then select WPA2 - Enterprise with AES encryption

  When I click on 'Next' to complete the configuration of the profile I just get a message that says:
  "An unexpected error has occurred."

  Has anyone experience the same problem?

  Thanks to another post and help Orgwizard, followed it to Symantec Endpoint Protection. I had emigrated from laptops using the Easy Transfer Wizard and did not reinstall MS and sought instead to Microsoft Security Essentials. MSE deleted and reinstalled MS and everything is fine now!

• WiFi WPA2 Enterprise with RADIUS - connection problem

  Hello

  I have here a new ISA 570w with the latest firmware (1.2.17).

  Anyway, I can't get wifi to work in mode WPA2 Enterprise with RADIUS authentication.

  Mode WPA2 PSK are not a problem.

  I have configured the BEAM properly and I can connect directly to him via NTRadPing without any problem. Also the test in the web interface works without any problem (see Figure 2, 3).

  The RADIUS server is a server Synology RADIUS on a Synology NAS, which is a FreeRADIUS server under the hood.

  In the settings of the ISA wireless, I put this RADIUS server for authentication (see screenshot 1, 4).

  However, I can not connect to connect to the network:

  On the iPhone (iOS 6.1.3) I get a prompt for a user name and password, but when I click on connect, it says 'connect to 'cisco3'... ". "and stays there.

  In ISA 570w newspaper, he said:

  Information

  Wireless

  MSG = add MAC station in the list of the ATU. VID = 5; MAC = 5 C: 59:48:02:78:3E;

  Information

  Wireless

  MSG = Wireless mode is a 802.11 mixed b_g_n

  When I cancel the connection attempt, he said:

  Information

  Wireless

  MSG = the Client has dissociated;

  On my Thinkpad with Windows 7 Professional I have everything configured as usual (see screenshots 5,6,7,8) but when I try to connect I do not get a command prompt where I wonder username and password, and finally the connection cannot be established (see Figure 9). Also tried with the same configuration on an another Windows 7 Pro installed costs for laptop with the same problem.

  I can't see any attempt of 570w ISA to authenticate anything in the logs of the RADIUS.

  Also the capture of network traffic on the LAN to the Synology NAS port does not show the RADIUS datagrams.

  I already disabled COP because I read that it can cause problems, but it did not help.

  Can you please suggest something else I can try?

  Thanks in advance!

  Kind regards

  Dominik

  I saw these screenshots, but that screen settings just select the button set up next to the authentication method in the section user authentication, under users.  In each of your screenshots, the RADIUS server identification number is 1, so I would also ensure that I configured the server ID RADIUS 1 that can be configured by going to users-> RADIUS servers.

  All that said, I have seen that your tests have passed and I also do not understand the point of having the RADIUS settings on other screens and then to have info ID RADIUS.  My thought is that you'd be able to pre-set RADIUS users of-> screen RADIUS servers and then select the RADIUS server ID in all other screens without having to enter the RADIUS news over and over again.  He also thinks that you could ignore the users-> screen RADIUS server and enter RADIUS information over and over again and it should work... as you set up initially.  However, based on the past experience of programming errors, I recommend configuring the ID from RADIUS server 1 under user-> RADIUS servers if you have not already... just in case where.

  Shawn Eftink
  CCNA/CCDA

  Please note all useful messages and mark the correct answers to help others looking for solutions in the community.

• HOWTO to Setup wpa2 + aes + psk with mac-filter WLC 4402 (RADIUS)

  Hello

  I'm trying to Setup wpa2 + aes + psk with mac-filter (RADIUS) on WLC 4402 (6.0.182), with Lap - 1142

  on security, the value L2 security wpa + wpa2 and make sure MAC filtering

  Uncheck the WPA

  check the WPA2, AES, TKIP to unckeck

  Mgmt PSK auth key

  PSK ASCII marker

  L3 no

  Uncheck the political web

  AAA servers

  Select enable accounting radius server server

  It's work fine, when I use WEP with mac-filter (radius)

  but when I select WPA2 is it fail and no newspaper both WLC server and RADIUS

  Is this limitation or bug...

  Thanks in advance for your help

  This sounds like it should work.  Maybe your client likes not wpa2/aes or does not match the PSK.  I would try to associate with this same configuration, but without enabled mac filtering to try to identify the problem.

  -John

• Windows 7 starter, no internet access, WPA2 Enterprise Network

  I use an Asus EeePC for the first time to work.  I replace my ibook apple that I had no problem with in the past. I entered the correct name for the network.  has selected WPA2-Enterprise, AES encriptación.  Using the PEAP authentication.  After entering my user domain\username and password, I connect to the network, but when I look at the network he says no internet access.  I can see my internal network and the computers.

  Any advice would be greatly appreciated.

  Thank you

  Hi Kbpipes,

  First check the edition of Windows 7 installed on your computer, since you mentioned that you use the Windows 7 starter edition. Windows 7 starter edition will not be able to join the domain network. To join the domain network, you will need to install either Windows 7 Professional, ultimate edition.

  Access the link below to learn more about the field of Assembly.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/domain-join

  To verify which edition of Windows 7 is installed on your computer, follow the steps below.

  1. Click Start.
  2. Right-click on computer and click Properties.
  3. Check the information on your computer.

  However, you try to run the troubleshooter from network built into windows 7 and check if it can help solve you the problem of connection to the Internet.

  Access the link below and follow the steps.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  You can also try to temporarily disable the security software of the computer and try to connect to the Internet. If you are able to connect to the Internet, you can contact the manufacturer of security software and check if you need to change the settings. Later, re-enable the security software.

  Also, you can try to start the computer in safe mode with network and check if you can connect to the Internet. To boot to the desktop in safe mode with network keep tapping key F8 during restart. Once you see the option to start it in safe mode with select network and press ENTER.

  Access the link to learn more about how to start the computer in safe mode: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  You can also contact your network administrator and check if there are settings that must be changed or configured to access the Internet.

  Post back with the above information and let us know the result.

  Thank you and best regards,

  Srinivas R Microsoft support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• WPA2 Enterprise 'disconnect' after about 1 h

  Hello

  I am the COMPUTER administrator for a company that has WPA2 Enterprise Wi - Fi set up in different locations across the country and who authenticate to a central RADIUS server. All windows/domain joined computers can connect and work fine however all our Macs in multiple locations meet the same problem. The Mac can connect and authenticate to the WiFi network using authentication EAP-PEAP (MSCHAPv2) however user anywhere between 30 minutes and an hour or so the mac receives an error "authentication failed on the network - authentication server is not responding. Contact your network administrator to verify the network infrastructure. ', and the only option is 'Disconnect '. The strange thing is the connection is always connected and ping google.com continues to operate until the moment I press 'disconnect '. I can then usually to reconnect back to the same network, authenticate, and continue to work for another 30-60 minutes until it happens again. This is obviously not ideal and very frustrating for my colleagues using Mac.

  I've been trying to solve cela a couple during the week and even set up a new NPS/RADIUS server on the latest version of windows server but the problem persists. I am very knowledgeable on the Microsoft products, but not so much with mac and apple. Am I missing something?

  My current test machine is a Macbook Pro 15 inch Mid 2010 running OS X EL Capitan 10.11.5 but I'm quite sure of what is going on between several versions of Mac OS.

  Thanks in advance for any guidance.

  There is an answer here of leroy Douglas that contains the caveat:

  the requirements are specific to the customer RADIUS server and can vary widely

  MacBook Pro - switching user disconnect Wi - Fi connection when you use authentication company WiFi

  have you contacted the developer of the RADIUS you have?

• To connect to the Wifi of WPA2 Enterprise

  Is there a way sony dashboard to connect to a WPA2 Enterprise wifi?
  I can't find how to set the field user name required by the authentication with the current interface system. Any suggestion?

  Thank you for your message.
  The links below contain the information you requested.

  https://us.en.KB.Sony.com/app/answers/detail/A_ID/32463

• WPA2 and WPA2 enterprise for Pavilion dv6t-3000 does not connect

  We have a WPA2 Enterprise network running on a Cisco Wireless Lan Controller.  The controller is 4400 series and the Aironets are 1130 G Series.  The problem is that this brand new computer not connect to this network from time to time and when it connects it times out.  This works for all Mac and PC computers.  What should I do for this HP pavilion dv6t 3000 to make it work on our network?

  Other information: the networks that aren't encrypted work very well.

  Intel(r) Wifi Link 1000 - Wifi card

  Thanks to another message board. The answer was.

  The second connection to the wifi card has not been set.  Open Bay for the wifi card and just reconnected the wireless card connectors.

• HP Mini 110 - question wireless WPA2-Enterprise

  Recently bought a HP Mini 110- 3098NR with the Atheros wireless card. It is currently running Windows 7 Starter edition, and whenever I try to connect to our wireless WPA2-Enterprise it does not connect. My HP 6930p connects fine to the same SSID with no problems.

  Anyone else have this problem or have a resolution?

  Found the issue... all parameters were an exact copy of my domain 6930p btu pc is where it was.

  Given that my netbook is not joined to the domain, I need to uncheck "automatically use the logon credentials.

• Unable to connect to network WPA2-Enterprise with Broadcom BCM4352HMB 802.11ac WiFi 2 x 2

  HP Envy 15 t-J100 using BCM4352HMB 802.11ac 2 x 2 WiFi driver version 6.30.223.221 on Windows 8.1 Pro 64-bit.

  I get an error trying to connect to my network wireless to work with "Unable to connect to this network." using WPA2-Enterprise authentication.

  The network appears in the list of available networks and the guests for my credentials (username & password), then it attempts to connect to it.

  A co-worker next to me has no problem with Win8.1, but has a 802.11n chipset (non - ac).

  I connect very well to my home network (802.11n) using the WEP protocols.

  I saw a post that might be one that this driver tries initially to connect with the COMPUTER instead of the USER name?  He suggested demotion to a Win7 64 bit, but I'm not find driver that I am willing to try.

  In the network configuration (802.1 x settings), I set myself to SPECIFY the MODE of AUTHENTICATION = "User authentication" without success.

  Solved the problem by installing the version of the driver 6.30.223.9 Win7-specific (sp64737).

  I can now connect to WPA2-Enterprise through Cisco Access Points.

  Driver is here:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D3%257CswItem%253Dob_126926_1%257CswEnvOID%253D%257CitemLocale%253D%257CswLang%253D%257Cmode%253D4%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Solution found in this post:

  http://h30434.www3.HP.com/T5/desktop-operating-systems-software-recovery/Windows-7-x64-envy-700-109cb-only-missing-2-drivers/TD-p/3352711

• Implementation of WPA2 Enterprise

  Hi all

  Sorry if this sounds stupid for someone of you.  Try to not me the flame.  I have been using wpa2 with key pré-partagées in my "little", network environment but I'm tired of manually retype the key to everyone when someone leaves the company, you start to grow at a pace quite rapid.

  I want to implement WPA2 business but don't know where to start.   I was looking for some how - s on the Cisco site, but this could be a good starting point for thinking.

  Our environment is a mixture of Linux and Windows, LDAP AD &, using Linksys WAP200 and Cisco switches.

  Y at - he of the docs for wpa2 Enterprise configuration which of you use?  Any suggestions are appreciated.

  Thank you

  Where do you want to configure this?  Client?  APs?

  It is best if you hang the WPA2 connecting GANYMEDE or RADIUS account.

• How to delete a profile type wifi WPA2-Enterprise when delete is not available.

  I have a WPA2-Enterprise wifi Windows 7 type profile that does not allow me to remove it. The delete icon is missing and it is listed in a section of managing networks wireless named "Networks you can see." The property screen reads, "these settings are managed by your system administrator." I am the administrator of the system.

  It is a profile of wifi which at one point was configured as a WPA2-Enterprise type test, but has been restored to a type of WPA2-PSK. Not the wifi profile is unusable because it says, "the settings saved on this computer for the network do not match the requirements of the network."

  How can I delete the wifi profile and start over?

  You could try the netsh wlan command delete profiles...

  Here's the syntax...

  http://TechNet.Microsoft.com/en-us/library/dd744890 (v = ws.10) #bkmk_wlanShowProfiles

  http://TechNet.Microsoft.com/en-us/library/dd744890 (v = ws.10) #bkmk_wlanDeleteProfile

  http://sdrv.Ms/QPTtQY

  Go to Start and type cmd in the search line. Right click on cmd.exe and select run as administrator , and then run the netsh commands...

• Help Setup WVC54GCA

  Hi, I followed all the instructions of setting in the camera and all seemed well.  The problem is that the usefulness of the camera does not show anything.  The camera appears in the Setup, but the IP address is different from the one I wrote down during installation.  Help, please.

  Thanks for the help guys.  The problem is sorted now.  I have download the new installer as suggests, but in the course of development in place, I manually entered the IP address, even if the program has provided details of the right.  Using 'Find IP address automatically' initially showed the same result, but the utility later returned to the other IP address!

  Everything works great now, even by e-mail notification.  Although not Gmail, as I discovered later in this forum.

  Thanks again for the help guys.

• Help Setup home network (Motorola and Linksys)

  Hello

  I need help to set up my home network, I created a diagram using gliffy.com to see my current setup.

  

  Currently all Wi-wired computers and connect to the internet successfully, i.e. with the default settings. The only thing I've changed is the password SSID and wireless.

  I need help to know the settings that I need the contribution for the Motorola and Linksys routers so that all the computers can find in the network.

  I really don't know what could be the exact technical terms, but if you would like more information I can gather. Thank you!

  Linksys by Cisco - Support WRT54G

  Motorola SBG6580 SURFboard extreme Wireless Cable Modem Gateway

  Configure the Linksys with a subnet of the modem IP... 192.168.0.10 or anything that is free... Connect the modem on the LAN of Linksys port, rather than the internet port and disable DHCP server on the linksys. You will need to renew the ip address of the clients that are connected to the linksys, but then they will get dhcp from the modem and everything will be on the same network.