!!! Help! The cells have extra background space

Similar Questions

• None of the cells have a vCenter running proxy service

  Came across this question last night.  I have read several sources to see if I can pin point the cause, but no luck so far as communication between the cell and the PB has been affected.  I followed the instructions in KB 1035506 but no change.  I stop the cell through the order of service and then also tried with the cell management tool, no difference.  QRTZ tables get rid of all their entries, but once I start the cell once again, they seem to fill with the same recordset.

  I'm about vCloud 5.1.2.1068441 and the use of MS - SQL 2012.  If anyone has any suggestions where to get then it would be greatly appreciated, thanks in advance.

  OK, just in case others run into this it seems that the KB (I mentioned in my first post) is incomplete dated 24/10/2013.  The correct sequence is, assuming you can afford the downtime:

  1 turn off the cell VM or run the service vmware-vcd stop command on the cell.

  2. THIS STEP IS NOT CURRENTLY INCLUDED IN THE KB.  Shut down your virtual machine, that's what I had to vcenter.  I guess that you can test just closing the service, I was not so inclined.

  3. run the script to clean your QRTZ tables.

  4. NOT INCLUDED (SUCH AS STEP 2).  Feed your vCenter VM backup, if you had closed the service you can try to run at this point.

  5. turn on your cell phone or run the service vmware-vcd start command.

  My translation of the explanation I got from people in support was that both vcenter and the cell needed to stay out of the db while cleaning and the KB was missing the piece vcenter vcloud.  I was told the KB would soon change, but at the same time, this might help.

• Adobe Edge OAM files have black background

  Hello. I have

  have a folio with 11 items. All items have an OAM file in them. Since I started this project 2 months ago, all the animations have transparent backgrounds and have worked a dream. They have worked fine up until today. I went to republish the folio - and all transparent have black background - they never had these before, are designed with transparent backgrounds and have always worked very well... They also all have transparent backgrounds (in the Panel inlays of the folio) but as soon as you take the files in InDesign - files all go black. Even when you preview files on the edge - they appear as they should. That is when he begins to interact with InDesign. This issue has been around for centuries. There must be a way to solve this problem - otherwise, what's the point of the edge?

  I even historic folios - these are not displayed correctly. Can anyone help please?

  Does that help? http://boblevine.us/digital-publishing-suite-101-using-transparent-edge-animate-files-with - pdf-folios /

• My hard drive and the Extras have plenty of space. Yet several times each and every day, I'm getting flashed "virtual memory minimum insufficient..." Virtual memory pagefile... "Any joy? Please help if you can. Thank you. Cecilia.

  Question

  I have another type of problem with Firefox

  Description

  My hard drive and the Extras have plenty of space. Yet several times each and every day, I'm getting flashed "virtual memory minimum insufficient..." Virtual memory pagefile... "Any joy? Please help if you can. Thank you. Cecilia.

  This has happened

  Each time Firefox opened

  Only a few weeks ago, (tried everything)

  Troubleshooting information

  ?

  Version of Firefox

  3.6.3

  Operating system

  Windows XP

  User Agent

  Mozilla/5.0 (Windows; U; Windows NT 5.1; en - us; RV:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)

  Plugins installed

  • -Adobe PDF plugin for Firefox and Netscape
  • Default plugin
  • Shockwave Flash 10.0 r45
  • Windows Presentation Foundation (WPF) plugin for Mozilla browsers
  • Java plug-in 1.6.0_07 for Netscape Navigator (DLL Helper)
  • Npdsplay dll
  • DRM Netscape Plugin store
  • DRM Netscape Object network

  Read about virtual memory here: http://www.ehow.com/windows-xp-virtual-memory/

• HOW TO PUT MUSIC FROM MY PHONEON THE CELL TO MY MEDIA PLAYER PLEASE HELP REALLY HAVE NO IDEA WHAT DO IM

  HELLO IM trying to take all the music I have on my LG L3optimus cellphone (the small square black small cell) and put them in my Media Player tried everything everyway and always nada can someone please plzhelp me, im not that great tech sorry :(
  Thanks for any help or answer (s)
  friskypeaches :)

  HELLO IM trying to take all the music I have on my LG L3optimus cellphone (the small square black small cell) and put them in my Media Player tried everything everyway and always nada can someone please plzhelp me, im not that great tech sorry :(
  Thanks for any help or answer (s)
  friskypeaches :)

  ==============================================
  Connect your phone to your computer via a usb cable
  and turn it on. Or... Remove the memory card from the
  phone, insert it into an adapter and insert the adapter
  in the slot appropriate in external or internal media
  drive.

  If AutoPlay does not start and give download options it...

  Reach... Start / computer / removable devices
  Storage...

  Look at the drive letters and see if one of them
  represents the cell phone. He can say removable disk.
  (a media player can be represented with several
  drive letters, you will have to choose one
  represents the memory card)

  If the mobile phone is recognized... right click on the drive letter
  and from the menu choose... Open or explore.

  The memory card in the phone directory should
  poster and if you browse through the various
  files, you need to find the media files.

  Once found, you can copy media files to a folder
  on your hard drive.

  And it may be interesting to try to adjust your AutoPlay settings.

  Windows 7 - change settings for importing pictures and videos
  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-importing-pictures-and-videos

  Windows 7: AutoPlay: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/AutoPlay-frequently-asked-questions

  Windows 7: Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-AutoPlay-problems

  How to set up the automatic run settings in Windows 7
  http://www.techtalkz.com/Windows-7/516004-how-configure-AutoPlay-settings-Windows-7-a.html

• Paragraph of body too much space, do the cells in a table

  I can't find a way to make the body paragraph does not place!

  The first cell of my table at the scale of the column is moved down by 2pt (smallest font size I can put to the body).

  I tried defining progressive space above and below the FMP to negative values and the column fill/outline.

  Is there some way I can get rid of this paragraph of the body or an another workaround to make cells align properly?

  

  The dots, just above the left cell is the body. Note how the cells left and right align...

  Create a paratag special features (for example, ' anchor') in order to maintain the table insertion point. The value that to have a negative space below equal to the spacing of the body line.

  In table designer, set the table format to have the same negative space above, as in the paratag "anchor".

  This should get rid of any extra space in front of the table.

• position of the cell - help needed, please

  I have problems with this site, that is created with a table.
  
  It displays perfectly in Safari (on Mac), but it is messed up in Firefox (PC and Mac) and Internet Explorer (PC). The problem is that the cell containing the navigation (to the top left, under the logo) moves from page to page and goes on some pages.
  
  This cell is supposed to appear right under the logo with just a small margin of the background showing through. Here's what's happening really (on a sample of pages):
  
  in the news - good, as well as contact and what you can do
  buy pine - too low and too long (too much space under the last link)
  Merchant Navy - far too low and too long
  what is everything - waaaay too low and waaaay too long (the worst of pages)
  
  Tests, I found that the question seems to be content in the right cell (the cell of great content on the right area), rather than the navigation or logo cell left. But I can't understand exactly what causes problems of size/position or how to fix it.
  
  I would appreciate any suggestions. Thank you!

  Alignments of cells can be tricky, when you merged cells like this. I think that the best way to solve this problem is to place all the elements (logo and navigation) left in a nested table, within a single merged cell on the left, which only moves based on the content on the right.

  Andy

• Error: "you have insufficient disk space to install this product" during the installation of flight simulator

  Original title: installation of Flight simulator problems

  Hi all, when trying to install deluxe Flight Simulator (FSX) on an older desktop with windows XP, I get the message "you have insufficient disk space to install this product on the drive selected, if there is more than 11 GB of free space. Any surgestions or help would be much appreciated because it is get annoyed and my son guard harassing me, thank you.

  Hi MartinHenry,
   
  -In what drive you are trying to install the game?
   
  Note Flight Simulator is usually installed on the drive C, unless another location is specified by you. So be sure that you have enough space in drive C to install the game.
   
  Here are some articles that you might find useful. Try the methods listed in the items donated for this problem.
  Error message when you install a Microsoft game or a mapping program
   
  You receive the error "your computer is running out of memory" message when you start Flight Simulator

• This computer does not have an enough space to the temperory files: error Code 0 x 80004005: upgrade of Vista

  Hello

  I am trying to upgrade to Vista home premium, Vista ultimate, but get the error continues on the execution of the installation program. Here is the error msg:

  This computer does not have a sufficient space for temporary files. Windows installation needs at least 445 MB of space on any partition for temporary files

  Error code: 0 x 800004005

  I want to just point out that I have 4 partition and each partition have at least 5 GB of free space on the disk with one of them having 35 GB of free space.

  Would be grateful if someone can help me solve this problem

  Concerning

  Vik

  Hello Vik.in,

  If you upgrade your Windows Vista,

  1. Open Control Panel by clicking the Start button, and then click Control Panel.
  2. Click on system and security.
  3. Click on Administrative Tools.
  4. Double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  5. In the navigation pane, click on disk management under storage.
  6. Select the volume that contains the existing installation of Windows Vista. In general, it is the C drive.
  7. Right-click on the volume and select Mark Partition as Active.
  8. Click Yes to confirm the action

     Note At this point, the existing Windows installation will not be able to start until the remaining steps are complete.

  9. Close computer management.
  10. Insert the Windows Vista DVD.
  11. Restart the computer.
  12. Use the Windows Vista DVD to start the computer.
  13. Choose the desired language and keyboard settings and then click Next.
  14. Click repair your computer at the bottom left of the screen.
  15. When you are prompted to repar startup data, click repair and restart.
  16. After the computer restarts, repeat steps 12 through 14.
  17. If your computer has only one installation of Windows, click Next. Otherwise, choose the correct installation of WIndows, and then click Next.
  18. Click on the link of the Startup Repair tool .
  19. Click Finish once the repair is complete. The computer should reboot to Windows Vista.
  20. Start the upgrade using the Windows Vista DVD

  Here is a link to the article that talks about it:

  http://support.Microsoft.com/kb/928232

  Hope it would work, answer back if it does not work.

  See you soon
  Syed Irfan

• Have no disk space in Vista and cannot locate the files to the origin of this

  At first when I noticed that my hard drive was full that I followed the tips shown on the wire "A NO DISK SPACE" by Rajesh S.  After doing all that I gained about 1 GB of space back.  I'm on Internet Explorer, ventured to a few sites, remove the brower and closed browser history.  Check how much space was left and the 1 GB has been reduced to 125MB.  Angry, I compressed my C:.  That's when I noticed several files (.swf, .htm, .mp4, .flv, and .png) that should have been deleted, but were not.  After the decompression the C: understood under what his screenname located.

  Now my problem is that I had a general situation where they should be, but when I explored the region I couldn't find no trace files.  I even ran a search later on one of the files I copied down and could not take his foot. (I am the admin of this cpu).

  Hello

  see if this program helps you determine which is where there

  http://www.Jam-software.com/treesize_personal/

• Help with a script that detects the content in a cell and apply the cell style to line

  Hello

  
  

  I am trying to add an article to my table formatting script that is a cell with the word 'Budget' (but this can be written as ' Budget:' or ' Budget: (E) "- but without the speech marks) and apply the cell Style - SponsorCells - to all the cells of the whole line. I currently have on what it will, but it does not work:

  
  

  function checkWhichTable()
  {
  // ensure the user made a selection
  if (app.selection.length != 1)
  return null;
  var currentTable = app.selection[0];
  if (currentTable.hasOwnProperty("baseline"))
  {
  currentTable = app.selection[0].parent;
  }
  while (currentTable instanceof Cell || currentTable instanceof Row || currentTable instanceof Column)
  currentTable = currentTable.parent;
  if (!(currentTable instanceof Table))
  {
  // No table selected
  return null;
  }
  return currentTable;
  }
  app.doScript(checkUserSelection, ScriptLanguage.JAVASCRIPT, undefined, UndoModes.ENTIRE_SCRIPT, "Process Table");
  
  
  function checkUserSelection ()
  {
  var a_table = checkWhichTable();
  if (a_table == null)
  {
  if (confirm("No table selected. Do you want to process *all* tables?") == false)
  return;
  allTables = app.activeDocument.stories.everyItem().tables.everyItem().getElements();
  for (aTable=0; aTable<allTables.length; aTable++)
  {
  processTable (allTables[aTable]);
  }
  } else
  {
  processTable (a_table);
  }
  }
  function processTable(table)
  {
  // do something here!
  
  
  //Set 1st Row Height
  table.rows[0].height = "30mm";
  
  
  //Find Text in Cell and apply Cell Style to Row 
  var  
    myCellText=['Budget', 'Budget:', 'Budget: (E)'];  
   var myRegEx = new RegExp("^("+myCellText.join("|")+")$");
    for (i=0; i<table.cells.length; i++)
    {
      if (table.cells[i].texts[0].contents.match(myRegEx))
        table.cell[i].appliedCellStyle = "SponsorCells";
    }
  
  
  //end - do something here!
  }  
  

  
  

  I can get the script to apply the cell style to "SponsorCells" for each cell that contain the word 'Budget' etc, but I need cell ever on this line to have the cell style applied. I tried to re-write line 56 which applies the style to a cell, but I can't seem to make it work. Any help would be great.

  
  

  Separate on this issue, I would like to have a line of code similar to the 46 line, which sets the 1st height of lines, but I would like to say "If a cell has 'A cell Style' and then applies the value height 10 mm". If someone could result as a help of bonuses, things would be great double.

  
  

  Thanks in advance!
  

  But that could be painfully slow. To speed things up, follow these steps:

  var cells = table.cells.everyItem().getElements();
  for (var i=0; i
  It is faster, because it creates an array of cells with a call to table.cells, which is several times faster than calling table.cells. And before assigning to line 12mm height is useful to check if it is already 12 mm. checking things in InDesign and do things only when it is necessary is much more effective than simply doing things even if they are not necessary.
  		   

• I worked on a banner for my website.  I have my background layer, my image photo layer and I try to make my text layer.  I'm haven been able to do this all morning.  Now when I select horizontal T, place the cursor and type... I get only one

  I am designing a banner for my website.  I have a background layer, a layer of photo image and I try to create my text layer.  I select horizontal T, place the cursor in the desired position and type.  I get a horizontal line... no letters.  Can someone tell me what is the problem and how to solve this problem, so I can't see letters?  Thank you!

  Right now, your question is marked as "not responded". If my or anyone's answer solved your issue. Mark your question as answered and mark the answer displayed as 'correct', only you can do. It helps when the moderators of the forums of audit.

• Background of the browser fill not fill not page. And the Web site of scrolling to the right to reveal a space.

  A direct copy of the site can be seen at http://www.tjrcomputersolutions.com/it-services.html .

  The background used with fill browser can't the footer when it is big enough. (height of 1400 px). I tried fiddling with the options "set to" does not.

  In addition, the site is scroilling to the right, showing a white space that obviously isn't OK.

  I am very experienced with HTML, CSS, JS, etc, but decided to try Muse this time. Unofortunately, due the Muse attributing completely arbitrary of the CSS tags, I can't decipher where the problem may be in the code. If anyone can help me with this it would be greatly appreciated!

  The spaces on the right (and the horizontal scroll bar) is most often caused by a block of empty text or other without filling out any stroke object evacuated to the right of the page in Design view. Try to use the object: unlock everything on Page (if you normally use the characteristic bolt) and then do a Select All and look for handles that appear for one or more objects positioned off the coast of the right side of the page in Design view (repeat the process of design finds for the master page that is applied).

  For filling of browser, is the "scale Fill' fill browser option?

  

• You do not have enough disk space to create the database...

  Hi all
  
  During the creation of the database, I received this message:
  
  + "You don't have enough disk space to create the database. +
  + You must at least 939008 on/U01 KB, you only 1981480960 available KB. +
  
  + Please allow more free disk space. » +
  
  I checked:
  Root@server# df h
  Size of filesystem used avail capacity mounted on
  / dev/dsk/c4t600A0B800033696A000017534E2F6F67d0s0
  2.2 T 2.2 G 2.2 T 1% / U01
  
  My Info:
  DB-INSUP2-C2VAS of SunOS 5.10 Generic_142909-17 sun4u sparc SUNW, Sun-Fire-V890
  Oracle database: 10.2.0.1
  
  
  Help, please!
  Thank you!
  Dan.

  Thank you all,

  I got the same warning messages and I created the point of editing/U01 with 50 GB for installation of Oracle and creation of database with no caveat. In my opinion, the warning appeared as the point of Assembly/U01 is too large (2.2 T).

  Sorting.

  Published by: hqtri on August 4, 2011 23:33

• Background color of the cell of report issues.

  I did the search, but so far no solution I can understand my situation :)...
  
  I got a report where the values in a cell are stained based on code values. It works fine, except that Span Style only of course "will cover" the values that appear in the cell, not the entire cell...
  
  Under column layout, I used the following expression of HTML and it works. BUT, I want the WHOLE CELL coloring...
  
  What I'm missing here? Obviously 'span style' is not the appropriate label... I searched through various HTML sites too for more help but no luck with that I can understand...
  
  
  Spaan style = color: #COLOUR #; make-weight: bold; "Use #Buffer # /spaan (LOL it was difficult to get the tag to actually appear on the display, so forgive the odd spelling of things!)
  
  Ideas? Thank you!
  
  Published by: metropoj on April 13, 2011 14:50
  
  Published by: metropoj on April 13, 2011 14:51
  
  Published by: metropoj on April 13, 2011 14:51
  
  Published by: metropoj on April 13, 2011 14:52

  Hello

  You must load jQuery in the HTML page header or header of page template.
  See for example
  http://www.oracleapplicationexpress.com/tutorials/66

  I report based query in Tyler Muth's blog
  http://tylermuth.WordPress.com/2007/12/01/conditional-column-formatting-in-apex/

  SELECT e.*,
    CASE
      WHEN sal < 1000
      THEN 'red'
      WHEN sal BETWEEN 1000 AND 2000
      THEN 'yellow'
      WHEN sal > 2000
      THEN 'green'
    END the_color
  FROM emp e
  

  Then I go edit column attributes 'the_color' and value view as a "Hidden".
  Report column must have the headers attribute model.
  My model of column 1 looks like this

  #COLUMN_VALUE#
  

  So if you do not allow partial refresh on the report, simply place at the foot of State region

  Kind regards
  Jari