Help the evolution of my portal in detail

Similar Questions

• Help the evolution of the scaling of a virtual channel?

  Can anyone help me please with this block of code that I have?  I don't understand why on the first run it works fine without error exception daq, but on the second run, I get an error.

  More detailed, I create a virual channel in a Sub with a button click event.  This virtual channel is set to the default values (MIN = - 10, MAX = + 10, linear scale with scale and Offset 1 and 0 respectively).

  The click event, is where I'm having difficulties in the other slot.  In this Sub I am creating custom scales and assigning values to them, setting the MIN and MAX values of the virtual channel on the same minimum and maximum values of the custom scale being used and assigning custom for the channel finally this new scale virtual to use.  The code works for the first run.  When I change the scale and then run the code again to a second iteration, I get an Exception of daq error.

  Its seems that the MIN and MAX are ready on the second run, but the scaling is not reset to the new scale of values.  Can someone check and if so, what is wrong and must be changed in my code?

  First execution of the click event of the 'Download' button to assign the custom scale with its values to the virtual chanel... works very well.

  

  Change the scaling, in the case of 400 to 600 and then run the same code with the 'Download' button click event and I get the daqException error

  

  myTask.Control (TaskAction.Stop)
  
  PreScaledVals.TrimExcess (): PreScaledValsArray = PreScaledVals.ToArray
  
          ScaledVals.TrimExcess (): ScaledValsArray = ScaledVals.ToArray
  If chkBoxTblScale.Checked = True Then
  
              Try
  
                  min = ScaledValsArray.First
  
                  Max = ScaledValsArray.Last
  
              Catch ex As Exception
  
                  MessageBox.Show (ex.) Message & ""  scale of table must contain at least two values prééchelonnés and two nationally. ")"
  
                  Return
  
              End Try
  
          Else if chkBoxLinScale.Checked = True Then
  
              min = numEdtMIN.Value
  
              Max = numEdtMAX.Value
  
          Else if chkBoxMapScale.Checked = True Then
  
              min = numEdtSMin.Value
  
              Max = numEdtSMax.Value
  
          End If
  LinScale = New DAQmx.LinearScale("Linear Scale", scale, offset)
  
          RMPScale = New DAQmx.RangeMapScale("Ranged Map Scale", prescaledMin, prescaledMax, scaledMin, scaledMax)
  If chkBoxTblScale.Checked = True Then
  
              Try
  
                  TblScale = New DAQmx.TableScale ("Table scale", PreScaledValsArray, ScaledValsArray)
  
              Catch ex As DaqException
  
                  MessageBox.Show (ex.) Message)
  
              End Try
  
          End If
  
          Try
  
              If cboBoxChannels.Text = "6" then
  
                  ChannelSelected = 6
  
              Else if cboBoxChannels.Text = "7" Then
  
                  ChannelSelected = 7
  
              Else if cboBoxChannels.Text = '8' then
  
                  ChannelSelected = 8
  
              Else if cboBoxChannels.Text = '9' then
  
                  ChannelSelected = 9
  
              Else if cboBoxChannels.Text = "10" Then
  
                  ChannelSelected = 10
  
              Else if cboBoxChannels.Text = "11" Then
  
                  ChannelSelected = 11
  
              Else if cboBoxChannels.Text = "12" Then
  
                  ChannelSelected = 12
  
              Else if cboBoxChannels.Text = '13' and then
  
                  ChannelSelected = 13
  
              Else if cboBoxChannels.Text = "14" Then
  
                  ChannelSelected = 14
  
              Other: ChannelSelected = 15
  
              End If
  Select the ChannelSelected box
  
                  Box of 6
  
                      myTask.AIChannels (lblCh6Wfg.Text). Minimum = min
  
                      myTask.AIChannels (lblCh6Wfg.Text). Maximum = max
  
                      If chkBoxLinScale.Checked = True Then
  
                          myTask.AIChannels (lblCh6Wfg.Text). CustomScaleName = "linear scale".

  
  Else if chkBoxTblScale.Checked = True Then
  myTask.AIChannels (lblCh6Wfg.Text). CustomScaleName = "Table of scale".
  Else if chkBoxMapScale.Checked = True Then
  myTask.AIChannels (lblCh6Wfg.Text). CustomScaleName = "stood at the map scale.
  End If

  TblScale = Nothing
  RMPScale = Nothing
  LinScale = Nothing

  Thank you

  Look at what you are doing with the New .

  If the object does not exist then prompts you to create it, but when it is created, you must be change it.

• Help the evolution of security questions and answers that the quick instructions do not work because they say to click on / use the prompts are not there!

  Went to quick help with trouble with memory security question answers, b/c I don't remember my answers of course. And so... the instructions were to connect to the Apple ID account, then click on the security option, and then he said to click on security questions of rearmament (1st issue), which was NOT the case to be found. It has been mentioned that if it wasn't an option, then that may mean that you do not have a rescue located in your account email, BUT I DO. Another potential problem that was mentioned was that I could possibly try to answer the questions too often wrong and there will be some time before the option reset the q would be available again (or at all exist in the 1st place, I expect). But the actual amount of the supposed time out time is never mentioned anywhere, and the reset option is not appear after a period of time I wait and start again to try again. So, what's the problem? Idk what to do, if someone knows the answer or can help so I must not call technical support that would be amazing! Thank you very much!

  -Sincerely, daughter of Tech-illiterate.

  If you know your password Apple ID, what ever you do the call will last about 3 minutes.

  Is - not worth the time to solve the problem?

  If your email address of rescue has never been verified, it cannot be used. The time-out period is not mentioned as part of the character course of these processes. Why share with someone trying to hack your account how long they have to wait to try again?

• Help the evolution of the toolbar

  Hello
  I need help to find how to change the theme in my toolbar?  I have a Windows XP and used the default colors such as Blue, Silver and Olive Green to my toolbar.  But recently he put to a Windows Classic theme.  When I went to change it to blue as it had before, it does not give me the opportunity but made me choose one that was classic Windows.  So I know longer have the default colors provided with the computer.  Someone know how I can get these back?  Here's a screenshot of what it looks like when I try and change the theme of my toolbar.
  Screenshot

  Hi aubree737,

  I suggest that scan you SFC on the computer that will search the corrupted system files and check if it helps.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Cannot change the visual style for windows and buttons

  http://support.Microsoft.com/kb/555512

• Help the evolution of computers

  Hello

  I have changed computers (pc to pc) and would like to know what's the procedure to install and activate my existing adobe on the new products.

  I have the creative suite production Premium 5.5. And I don't have the installation CD and serial number.

  Thank you!

  Hi Pz2014,

  Welcome to the Adobe Forums.

  You can install it on the new machine with the same serial number.

  If you do not use the product on the old machine

  You can launch any product and click Help > deactivate.

  Thank you

• Help the evolution of the CSS based on the resolution of the monitor

  Hello!

  So I thought it would be cool to have some sort of javascript that would change the CSS based on what users monitor resolution was.  I undertook research on google and found this:

  http://www.Warriorforum.com/website-design/10031-script-load-different-CSS-depending-scree n - resolution.html

  Change what I needed to I came up with this code:

  < script type = "text/javascript" >

  function getcss (cssfile) {}
  loadcss = document.createElement ('link')
  loadcss.setAttribute ("rel", "stylesheet")
  loadcss.setAttribute ("type", "text/css")
  loadcss.setAttribute ("href", cssfile)
  document.getElementsByTagName ("head") [0] .appendChild (loadcss)
  }

  If (screen.width < = "800")
  Sets the range of resolution you target (less than 800 pixels wide in this case)

  {
  getCss('css/800m.css')
  Sets the .css file that you want to load for this range (css/800.css)
  }

  ElseIf (screen.width > '1024' & & screen.width < '1152')
  This time, we are targeting all resolutions between 1024 and 1152 pixels wide

  {
  getCss('css/1024m.css')
  And we want to load the .css file named ' css/1024.css.
  }

  ElseIf (screen.width > '1280' & & screen.width < '1360')
  This time, we are targeting all resolutions between 1360 and 1280 pixels wide

  {
  getCss('css/1280m.css')
  And we want to load the .css file named ' css/1280.css.
  }

  ElseIf (screen.width > '1440' & & screen.width < '1600')
  This time, we are targeting all resolutions between 1440 and 1600 pixels wide

  {
  getCss('css/1440m.css')
  And we want to load the .css file named ' css/1440.css.
  }

  on the other

  {
  getCss('css/1680m.css')
  This else a condition 'if' statement If any of the following criteria are met, load css/1680m.css
  }

  < /script >

  
  So far, the following resolutions work:

  800 x 600

  1360 x 768

  1440 x 900

  But the resolutions

  1024 x 768

  1152 x 648

  1152 x 864

  1280 x 720
  1280 x 768
  1280 x 800
  1280 x 900

  Do not.  They all have a site that is too big.  My CSS for these resolutions (1024 and 1280) are very good and have no problems.  So I think that something is wrong with my JS.  I'm not a JS expert so I hope that I do not something to spoil.

  Any help would be appreciated.

  Thank you

  If I go with the button select a how can I do it on multiple pages?

  Use of cookies.

  http://www.dynamicdrive.com/dynamicindex9/stylesheetswitcher.htm

  Nancy O.
  ALT-Web Design & Publishing
  Web | Graphics | Print | Media specialists
  http://ALT-Web.com/
  http://Twitter.com/ALTWEB
  http://ALT-Web.blogspot.com

• help the evolution of the size of a text box

  Hello. I have an a couple of text aligned vertically in a < Vgroup > boxes. each text box is filled with the xml data. but sometimes it didn't isn't a lot of data for a particular text box and I want to reduce the number of lines in the text box, so it is not so much empty space. just not sure the best way to go about it. any suggestion would be great. Cheers.

  Try the following code.

  Kind regards

  Anitha

• HI PLZ I WANT TO HELP THE UPGRADE TO SSD ODNT WILL I KNOW IF MY BOARD OF DIRECTORS AND THE CPU SUPPORTS

  HI PLZ I WANT TO HELP THE UPGRADE TO SSD ODNT WILL I KNOW IF MY BOARD OF DIRECTORS AND THE CPU SUPPORTS

  MODEL

  Compaq Presario CQ42-372TU computer laptop

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay/?javax.portlet.begCac=...

  PLZ ANY BODY HELP ME

  You can upgrade to an SSD.

  The simplest method is to use an SSD as the Corsair Force 3 and don't forget that you buy the kit of migration.

  The migration kit comes with cloning software and a usb to SATA power cable that connects again SSD.

  It is recommended that you purchase and SSD that is approximately 256 GB in quality if you can find one that is affordable.

  SSD with migration in a kit options search I did.

• I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  Hi Happyrockgeek,

  Welcome to Microsoft Windows 7 answers Forum!

  This problem occurs if the Windows security .dll files are incorrectly registered.

  To resolve this problem, you can perform the two methods of troubleshooting, check if the problem is resolved.
  Method 1:
  Run (Checksur.exe) system update readiness tool.
  To do this, follow these steps:
  1. download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/default.aspx/KB/947821
  2. try to install the updates again.
   
  Methods 2.
  Reset the Windows Update components.
  1. to reset the Windows Update components automatically, click the fix button in the link below.
  http://support.Microsoft.com/kb/971058 
  2. click run in the file download dialog box and follow the steps described in the fix it Wizard.

  I also suggest you to install the latest version of Windows Installer 4.5.
  Follow the link below to download:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
  and you can also try to install after you turn off the firewall.
   
   
  It will be useful.
   
  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum.

• How to create the column of the table for long-form Master detail relationship

  Apex 4.1

  Oracle 11g

  I created a form master detail and see the main table hotel_list and table hotel_mapping as detailed below.

  Hotel_list

  ID HOTEL_NAME

  1 Holiday Inn

  Hotel Hilton 2

  Hotel_mapping

  ID HOTEL_NAME MAPPING_NAME

  1 Inn Holiday Inn Select hotel

  2 holiday hotel Holiday Inn Select

  3 hotel Holiday Inn Holiday Inn Hotel

  4 Hilton Hotel Hilton Hotel chain

  Hotel Hilton 5 HiltonHotel

  Table Hotel_name Hotel_list is a linked table Hotel_mapping

  When I add a line to the Hotel_mapping table for the selected row in the hotel_list table, mapping_name of column is null, therefore impossible to create the relationship between the main table and the secondary table.

  I would like to know, how to create the relationship?

  Thank you very much

  Best regards

  Yong Huang,

  simple step see creating a form detailed master with APEX - Assistant Master retail

  and check how to maintain the relationship between two tables,

  simple return the packaged application «Sample of Masters details»

  and try to understand this concept...

  In your example, use Hotel_list.ID as a foreign key in the table Hotel_mapping

  and maintain the relationship with the column ID...

  and choose the display type of the column Hotel_list.ID in table Hotel_mapping as List(Query Based LOV) select.

  otherwise the best way is to create sample on oracle.apex.com

  I hope this helps...

  Leave.

• Difference between Horizon 6 Advanced and the company of 'unified portal' and Horizon 6 workspaces

  Can someone do a bit of explanation for the following:

  I am you are looking to understand the use of terminology in marketing and how it fits into the picture.

  Terminology:

  Workspace - VMware

  VMware workspace - Horizon

  Workspace Portal - VMware

  -Unified Workspace

  With the following references

  • "Portal Workspace 2.0"VMwarefiles Horizon feature is deleted ' VMware Workspace Portal 2.0 Release Notes
  • VMware Horizon workspace (notice the data sheet is still published but is a bit outdated)http://www.vmware.com/files/pdf/workspace/VMware-Horizon-Workspace-Datasheet.pdf
  • "Access to files and Applications from anywhere.

  AND the use of the terminology "unified workspace.

  What the "Unified Workspace" such as described in the "VMware workspace" link below different described also in the same document?

  http://www.VMware.com/files/PDF/products/horizon-view/VMware-horizon-view-pricing-Licensing-FAQ.PDF

  They seem to be different that the ability to share files is available under "VMware workspace.

  There is good documentation on the item "VMware workspace.

  http://www.VMware.com/files/PDF/Techpaper/VMware-horizon-workspace-reviewers-guide.PDF

  http://pubs.VMware.com/horizon-workspace-10/index.jsp#com.VMware.HS-install.doc_10/GUID-71C2045E-2934-4D87-A597-E82B2BE88B2C.html

  But I can't find documentation on "Unified workspace" limited the video below speaks of a 'unified workspace", but has pictures showing"VMware workspace.

  https://www.YouTube.com/watch?v=2SstavM0r9A

  More specifically,.

  -Are they a portal with the various components of license?  (I guess that's the case, but the documentation is very limited)

  -They are two different portals?

  If they are two different portals how both are integrated?

  Help appreciated.

  Hi Sean.

  I can understand that it can be confusing, a lot of changes has been done in recent years.

  The Horizon workspace file-sharing component were interrupted from Horizon Workspace 1.8.2 will finally be replaced by Airwatch Secure Content Locker.

  I'll try to answer your questions:

  1. - are they a portal with the various components of license?  (I guess that's the case, but the documentation is very limited)

  1. A: Yes, there is a single portal.

  2 - they are two different portals?

  2a: no, there are not two portals.

  3. If they are two different portals how both are integrated?

  3 A: there is only a single portal.

  4. how the "Unified Workspace" such as described in the "VMware workspace" link below different described also in the same document?

  4 A: its the same, it's just a way of describing the feature.

  Linjo

• How cancel my creative subscription of clouds because it is impossible for me to do so by the Creative Cloud manage Plan (Plan details - Plan to cancel)?

  Hello

  How cancel my creative subscription of clouds because it is impossible for me to do so by the Creative Cloud manage Plan (Plan details - Plan to cancel)?

  Thank you

  Contact the Support from Adobe directly through chat or by phone.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Stuck on the step "to provide your payment details.

  Hello

  I'm paying for creative cloud for individuals with annual monthly, but the step "To provide your payment details" is stuck and loading forever.

  I tried different browsers, restart the internet connection, trying different PC, without success. I need to start a project right now, but I can't buy the software?

  Help, please! Thank you!

  I had the same problem earlier today... but now it seems to work (he let me pay... now I'm waiting for my serial number...)

• Where can I get the complete list of features and details of the v28

  Where can I get the complete list of features and details of the v28, I searched a lot but could not find the official list of features.

  Try this:

  http://helpx.Adobe.com/Digital-Publishing-Suite/help/whats-new-release.html

• I think the evolution of my iMac OSX 10.8.5 El Captan. My old printer Stylus Epson colour 740 still work?

  I think the evolution of my iMac OSX 10.8.5 El Captan. My old printer Stylus Epson colour 740 still work?

  Check the Epson site to see if it is supported.