Help! There is a blue line dark on the timeline in the composition Panel.

Similar Questions

• Hover layer scenario shows border line of corner of the layer in the Composition Panel

  Hello

  Hover layer scenario shows border line of corner of the layer in the Composition Panel. This works CS6, CC, but does not work in CC 2014.1.1

  Please help me. How can I activated this function.

  Thank you

  Max

  Please look at the picture below.

  

  As these highlights layer do not appear in after effects CC 20141 (13.1) is a bug. This problem is fixed in an update that we plan to release later this week.

• When you click on a link normally - opens a new tab, but in this version a new window opens and there is 2 blue bars - bar at the top of the browser and on the left side is a firefox button orange - next time I start firefox it crashes!

  This window looks weird: there are 2 blue bars (the blue top bar - normally, there are 1, with the name of the current page and - Mozilla Firefox written in white within the bar) as well as in the 2nd bar there is an orange firefox, on the left side button.

  I already asked this question and advised to start in safe mode - that did not help either.

  Please help me quickliy, it's really annoying.

  Thank you
  Richard

  Firefox crash

  Create a new profile as a test to see if your profile is the source of the problems.

  -> Basic troubleshooting: a new profile

  • https://support.Mozilla.com/en-us/KB/basic%20Troubleshooting#w_8-make-a-new-profile

  -> If this new profile works, then you can retrieve your bookmarks and passwords the old profile.

  -> Recovering important data from an old profile

  • https://support.Mozilla.com/en-us/KB/recovering%20important%20data%20from%20an%20old%20Profile

  Opening links in a new tab

  -> click on the Firefox button, and then click Menu Tools-> Options (or Options )-> tabs panel-> location-> tick on open new window in a new tab instead click OK

  Check and tell if its working.

• There is no address line to put the web site addresses

  I downloaded Fire Fox both times and whenever there is no address line to place any website address.

  I have a laptop with windows 7

  Make sure that you are not running Firefox mode full screen with all the hidden toolbars.

  • Press F11 to toggle mode full screen (file/Firefox > fullscreen)

  If the menu bar is hidden, then press the F10 key or hold down the Alt key, which should make the convening of menu bar.

  Make sure the toolbars like the toolbar 'Navigation' and the 'personal bar' are visible: "view > toolbars".

  • Is he missing elements then open the window customize via "view > toolbars > customize" or "Firefox > Options > toolbars»
  • If a missing element is located in the toolbar palette and then bring her back in the window customize the toolbar
  • If you don't see an item on a toolbar and in the toolbar palette, then click on the "Restore default" button to restore the default toolbar set up.

  See also:

  • http://KB.mozillazine.org/Toolbar_customization
  • https://support.Mozilla.com/kb/back+and+forward+or+other+toolbar+items+are+missing

• With the help of trigger to copy lines without specifying the column names

  Hello
  
  I have a large table:
  Time V0 V1 S1 S0... V800 S800
  
  I make a copy of this table.
  
  Then, I want to create a trigger that inserts all rows in the copy whenever they are inserted in the original:
  create or replace trigger gila_dem2_trig
  before inserting
  on gila_dem2_1_1m
  REFERRING AGAIN AS NINE OLD AND OLD
  FOR EACH LINE
  Start
  insert into gila_dem2_1_1m_copy (V0 of time... S800) values (: new.) New time: V0.., new: S800)
  end;
  
  I want to do this without having to explicitly name the columns. Something like: nouveaux.* would be nice
  but does not work.
  Is there a way to do this?
  
  Concerning
  Tomas

  While you can write dynamic SQL statements in triggers it won't help.

  You will not be able to dynamically reference the: NEW values.

  Your only choice is to specify all columns

• in audio clips, there is no volume line to adjust the crossfade in

  I have imovie 10.0.6 and I can´t find the line to set up the volume for the audio clip. So I melted can´t in or out. Thanks for the help!

  You may not have "show waveforms set?

  

  Geoff.

• How will I know that the software is up to date?  There used to be an icon in the top panel of my mac.

  I am a user affected by the account of my company and the software had suddenly become unusable. Adobe reinstalled successfully but the icon cloud that used to be in the top panel of my mac has disappeared and has been so for a few months before the accident. How do you know that all software are up to date now?

  It depends on how the CC has been installed directly by CC or through presentation.

  Please contact support for this https://helpx.adobe.com/creative-cloud/creative-cloud-teams.html

  Concerning

  Stéphane

• Re: Satellite A500 - 15 M - blue vertical line appears on the LCD screen

  Hi - I turned on my laptop the other day (I have an A 500 - 15M) and I noticed a very thin dotted vertical blue line running through the centre-right of the screen of my computer, all the way up and down.

  I tried things like change the desktop theme, screen settings, updated to the intel drivers but nothing is done, it won't go away. Does anyone have a solution or a similar problem? I bought an extended warranty of 3 years so could still call Toshiba and ask them about it, but wanted to see if there was a quick fix here of someone.

  I tried to restore to a previous restore point, but nothing helped.

  Help please, because it is very annoying!

  Thank you very much!

  Hi bilal1982,

  Hmm, it seems to be a hardware malfunction with your laptop

  I mean that if you tried to update the driver display and restored Windows to an earlier point, but without success, it seems that the graphics card or LCD screen is defective.
  You can connect an external monitor to check if it of the graphics card or internal LCD screen.

  But in both cases you should contact a provider authorized in your country. Guys can fix your laptop under warranty, so it of free for you.

  Here is a list of aspic, where you can search:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good luck! :)

• Multifunction Color LaserJet Pro 200: blue line when scanning from feeder not dish

  When I scan from the charger, I get a blue line that spans the length of the document. It does not happen when I scan from the tray. any suggestions on how to fix?

  Thank you

  Hi @Pichopop,

  Welcome to the Forums of HP Support! I read your post and see that you have found a blue line, during the analysis from the ADF. I will definitely do my best to help you. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  What is the name and the product number of your printer? How can I find my model number or product number?

  There are several models of Laserjet 200 series.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation. Poor power connections can cause problems of copy and scanning and rejection of the toner.

  Here is a document for the cleaning of the glass and Platinum. You will notice that there are two areas for the glass, one for the dish and the other is for the ADF.

  • Copies, faxes, or Scans have Vertical black and white lines to the exit.

  Do not take into account the model and the title. Proceed to step three: clean the glass and Platinum sweeping.

  Please let me know the results and if there is anything else I can help you. Thank you.

• kColor Laserjet CP1215 - blue lines at the bottom of page

  My LaserJet CP1215 began about 2 cm long printing blue lines every 2 cm on each side of a sheet of paper on the side of the printer.  I ran clean Page twice and also printed at least 100 sheets of paper to remove any toner that can be had on the machine.  However, nothing has worked, and the printer still prints blue lines.  Interestingly, no blue lines appeared on the own Page book when I put it to run.

  Any advice would be very welcome.  Thank you

  Hi Susieb,

  I don't know what you mean that "blue is bloodshed." Do you mean it is loose toner inside the printer cartridge?

  You did "eleven Solution: identify and replace the problem print cartridge'? '" These steps help to identify if the problem is with a cartridge, or if the printer should be cleaned more.

  If you have a cartridge that leak, sometimes there will be a loose toner inside the printer. It looks like the brilliantly colored or black dust. Some new cartridges come with a cleaning cloth (they ones I've seen are yellow/orange). If you don't, I'd get a type Microfiber cloth to wipe it off upwards.  If you get any on you or on your clothes, do not hot water to clean! The heat will set the color. Use only cold water.

  Another thought is that the imaging drum is damaged. In this case, you would need a new cartridge to solve the problem.

  If the cartridges are genuine HP cartridges, it is possible that they are under warranty. You can call the HP Technical Support to see if they are under warranty. If you call in North America, the number is 1-800-474-6836 for all other regions, click here.

• Strange blue lines in the preview window

  I opened bridge today and found the blue lines all in the preview window. They are there for each image and do not go far when I stopped. I have reset the workspace, preferences and hides nothing doesn't. I'm no expert with Bridge, but I can't find any solution for this! Any help would be much appreciated.

  Hi angstlyplatypus

  Try to restart your computer once.

  Kind regards

  Sahil

• Long blue line of the axis on the display of the Satellite A100-207

  Hi guys

  During the few days a thin blue line appeared in the center of the screen-it disappears and reappears on the change of the angle of the screen of the laptop open. Anyone have any ideas as to the cause and possible solutions?

  See you soon

  April

  There is a very simple method to find out what might be wrong.
  Connect the laptop to an external monitor and see if the same thin blue line appears on the second monitor.

  If the same line will be available on the external monitor, I assume that there is something wrong with the cell phones of the GPU (graphics chip).
  This could be a case value because the graphics card is attached to the motherboard and the entire motherboard must be replaced to solve this problem.

  But if the line does not appear on the second monitor or there is a problem with the LCD itself, or with a small part as FL-ups for example.

  In any case, it seems to be a hardware problem, and in this case he must contact the ASP!
  Try to contact the technician and ask for later handling.

  Good luck

• WHEN PRINTING MY PRINTER DELL A940 PRINTER, IT PRINTS BLUE LINES

  I OWN A DELL A940 PRINTER AND WHEN I PRINT, IT PRINTS BLUE LINES., WHAT IS THE CAUSE FOR THIS? THANKS TO ANYONE WHO HELPS ME., VERY APPRECIATED, STEVE

  Hi STEVE,.
   
  From my research, this issue seems to be common for this model of printer.
   
  Replace the cartridge of the printer to resolve the issue. Here's a post that responds to this problem of Dell support. Check if the post will help you also.
  Blue lines on the A940 prints

• Strange green line appears on the bottom of the frame of sequences (NOT the ONLINE PREVIEW RAM)

  Hello!

  I've recently upgraded to AE CS5, after long use of CS3.  I came across a problem that I hope there, someone can help me with.  For one of my elements of film a green line (one pixel high) appears at the bottom of the frame.  The green line appears in the layer panel, so I'm not there with plug-ins display - only it's purest form.  When I open the file in QT on my Mac, the green line at the bottom of the image is not there.  This has not met with the CS3 version, and I'm lost for a solution.  I did some googling and found some users AVID talks about a similar problem and was related to the fields.  So I went to 'Interpret the film' and then removed the fields with 'Lower' first and the green line goes.  The problem with this work is about the film looks so poor.  This is a digital image file, and I wouldn't remove fields because there were not at first.

  I have attached a few screenshots of the images in QT and AE CS5 for you all to see the question.

  Has anyone encountered this problem?  Is this a known problem CS5?  Is it related to OS x 10.6.5?

  Any help, advice or advice is greatly appreciated!

  Thank you!

  

  

  There is nothing to fix, and it's not a bug. For MPEG of any sort, all dimensions must be multiples of 2. It is inherent to the work of compression. You can not have a high 219 px film and not have it be cropped or enlarged pixel, with all the negative sides. I assume that the file is in fact already 220px high, the only difference being that CS3 can interpret correctly flag Quicktime display area, considering that this happens not in CS5. Which could be considered to be a "bug", but because Apple does not provide a 64-bit Quicktime and Adobe had to reverse engineer things, who do you blame? Yet once, it is not really something wrong here. In fact, the same file read on another computer or in a setting different software player can expose the same question, even when working in CS3. So the only real 'fix' is to properly encode the file 218px or 220px high. And the fields do not belong in desktop images. Apart from EI the irregular line will also be visible no matter how AE only displays a field both internally. You will need to handle this correctly, even though you may not want to.

  Mylenium

• Satellite P100 - thin yellow line appears on the screen

  Hello world.

  I have a Toshiba Satellite P100, 3 years ago.
  Recently appeared on my screen an intermittent thin vertical yellow line.

  Nothing serious, but very annoying, especially when I play or watch movies.
  I just found that it is not a software problem, but a material one (I've connected the laptop with my TV and there is no yellow line shown on the screens).

  So I guess there is something wrong with the LCD of my Satellite.

  You think it's interesting to try to fix this? What can I do?

  Thank you

  Hello

  > So I guess there is something wrong with the LCD of my Satellite.
  Maybe

  Always is that those issues could be related to a defective LCD screen or graphics chip
  But given that this line is not visible on the TV or external monitor this could be an internal screen problem and not a problem of graphics chip

  > You think it is worth trying to fix this? What can I do?
  Well, a laptop screen is not a party so inexpensively.
  It costs about 300-350 Euros and I wouldn't try to replace it if the warranty is no longer valid

  Welcome them