Help to open my NAT...

Similar Questions

• I need help, open my NAT for an xbox 360 on a WRT160N v3

  Hey guys. I just got a new wrt160N v3 and I need help on opening the NAT. I use to have the wrt160N v2 but I replaced it. so can you guys please help me. Thank you

  Okay I found the solution myself. Here's what you do:

  Open a Web browser and type your default gateway which is usually: 192.168.1.1

  After you do this type in as the admin and the password admin its also admin once you open a session go in application and games and go to the subcategory "port range forwarding."

  For the first set appliction Xbox1 and the beginning and the end, the port numbers are 88. The Protocol is both and the IP address must end at 120.

  For the second application updated Xbox2 and the beginning and the end, the port numbers are 3074. The Protocol is both and the IP address must end at 120.

  For the third set appliction Xbox3 and the beginning and the end, the port numbers are 53. The Protocol is borh and IP address must end at 120.

  For the fourth request put Xbox4 and beginning and end, the port numbers are 80. The Protocol is both and the IP address must end at 120.

  Save the settings and once you go back to the installation page, make your size MTU 1364. Save the settings and then go to security and uncheck the anonymous internet requests to filter. Save the settings.

  Go to the administration tab, and then make sure that UPnP is enabled. If it is not, turn it on and save the settings.

  Tour of your router and the modem. Wait a minute and plug the modem first. Once it starts up plug in the router and your NAT must be open for xbox live.

• How to open the NAT for a Linksys 160N with a WRT54G2 wireless ethernet bridge?

  Hello, I have a Linksys 160N2 router, and I hooked a version w / updated router Linksys WRT54G2 {v24 sp1} DD - WRT.  It worked great, but now my sons xBox 360 States that the NAT is moderate and should be opened.  I don't know how to open the NAT.  Any help will be greatly appreciated.

  This do-

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  Click on the tab "Games and Applications" and then click the sub-tab "Port Range Forwarding"...

  (1) on the first line in the box, type Application in ABC, in the start box, type in 53 and type in 3074 service box, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable, click on save settings once it's been...

  (2) once you return to the game to the top page, click the Security tab and uncheck block anonymous Internet requests and click on save settings...

  3) click on Setup and change the size of the MTU to 1452 and click on save settings... Click the status tab, and take note of DNS1 and DNS2 address...

  (4) address IP, Goto settings XBox network settings and assign the following on your Xbox and select manual IP settings
  IP address:-192.168.1.20, subnet mask:-255.255.255.0 default gateway:-192.168.1.1...

  (5) also assign addresses DNS on Xbox
  Use DNS1 and DNS2 addresses you took note of the primary router as secondary DNS & DNS status tab for the xbox...

  (6) turn off your modem, router and Xbox... Wait a minute...

  (7) plug the power to the modem first, wait a minute and plug the router power cable, wait another minute and turn on the Xbox and... test it connects...

• in my iphone all nine 6s photos are coming in img instead of jpg.  help to open and convert.

  Please help me open and convert img photos received in jpg format.  In addition, video came in a text to MOV and was perfectly fine on the phone to shippers. "Would not send" on mine.

  How files are received, it is up to what type of file the sender offers you, not to your receiving device. This would apply to both photos and videos. An img file, perhaps only the name of the file itself, which is part of the phone to file naming convention. Image and video converters can be found online. There are many of them.

• HELP TO OPEN MY PROGRAMS

  Hello.. (I NEED HELP TO OPEN PROGRAMS) WHENEVER I TRIED, THIS MESSAGE OPENS... C:\Documents and settings\All Users\Menu Menu\MSN.lnk is not a valid Win 32 application. and what happened to all the programs not only with MSN... I appreciate your answers.

  Then you should have said 'yes' you want to run the software. Or right click on download and choose "merge". MS - MVP - Elephant Boy computers - don't panic!

• Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the

  Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the move tool. They have become a composite of two layers which could be developed further with the mask tool.

  Hello

  Please go to the preferences > workspace and uncheck the option 'open the document in the tabs '.

  

  Now you can click on file and choose file > open and open the two images in two different windows which can be arranged side by side.

  Thank you

• How to make tab contents of CHM help be open by default?

  I use RoboHelp HTML 7.0.3.001 and generate Microsoft HTML Help in my project output file. Everytime I open generated the CHM file, only the default topic is displayed. Then I should click on view button in the toolbar to display the contents tab containing folders and topics...

  It seems to me, in previous versions of the RoboHelp (can be in x 5 version), there is a checkbox in project settings that allowed me to open the TOC Panel when help was opened.

  Could get this configuration somewhere in RoboHelp 7.0.3.001? I can't find an appropriate option and hope for your help

  Thanks in advance,

  Olga

  Hello

  Indeed, you can control this. Do you this through the Properties window. To do this, click view > pods > project implementation. Expand the Windows folder , and then double-click the CHM window to display the properties for Windows.

  You should be interested in the Options area of three components. Make sure that the that hide Nav pane at startup option is not enabled.

  

  If you find that this is not enabled, try allowing him and dismissing the dialog box for re - write values. Reopen the dialog box, and then clear the option.

  If this fails, you will simply need to create a new window and assign it to the recipe for the presentation of a single Source.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7 or 8 times now! Adobe Certified RoboHelp HTML Training SorcererStone blog RoboHelp EBooks

• Need HELP to change the NAT type to open on Linksys E2000.

  I was wondering if anyone could tell me how to change my nat from moderate to open so I can play xbox without any problems. But the strange thing is my nat was open, but it changed to moderate and I recently bought the linksys e2000 and it was open at first, but no more. If anyone can help me?

  Follow the below mentioned settings, then check.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER...
  Let the empty user name & password use admin lowercase...
  On the Configuration tab change the size of the MTU to 1365, then click on save settings...
  Click the 'Administration' tab and disable the UPnP option and click on save settings...
  Click on the tab "Games and Applications" and then click the sub-tab "Port Range Forwarding"...
  (1) on the first line in the box, type Application in ABC, in the start box, type in 53 and type in 3074 service box, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable, click on save settings once it's been...
  (2) once you return to the game to the top page, click the Security tab and uncheck block anonymous Internet requests and click on save settings...
  (3) click on the status tab, and then note the DNS1 and DNS2 addresses...
  (4) address IP, Goto settings XBox network settings and assign the following on your Xbox and select manual IP settings
  IP address:-192.168.1.20, subnet mask:-255.255.255.0 default gateway:-192.168.1.1...
  (5) also assign addresses DNS on Xbox
  Use DNS1 and DNS2 addresses you took note of the primary router as secondary DNS & DNS status tab for the xbox...
  (6) turn off your modem, router and Xbox... Wait a minute...
  (7) plug the power to the modem first, wait a minute and plug the router power cable, wait another minute and turn on the Xbox and... test it connects...
  IP address: part 192.168.X. [last intellectual property in your device] for example if static ip given to the unit's 192.168.X.10 get the last part and put it in the empty box.

• Print Help does not help me open downloads on my android

  Cannot retrieve or open downloads. Printed text does not help because I can't find the button

  You are able to use the menu in Firefox for Android? On some devices, a stack of 3 points appears at the right end of the address bar to display the menu, while on other devices, there is a button to (touch capacitive) of 'material' to the camera button at the home to show the menus.

  In the menu, you should find under Tools downloads.

  In addition, by default, Firefox uses the download system folder, so if you open the download application that comes with your device you should find them there (in general).

  A little luck?

• Need help to open Apple Id and password

  Hello, I got an iphone 5 s of my friend but I couldn't open the problem ID & password. It bought his brother in law of the United States. Then, he made are not used. now, he also forgot to real owner ID & password. can you help us get the real owner ID & password to re - open the phone. ID is S***@gmail.com.

  pls

  thnx-Monir

  Unless you can get the original owner to remove the phone from his account, the phone does nothing for you. I'm sorry.

• Help with opening a photo program help links

  Install a program called INTELLI_STUDIO for my photos

  Almost all of my photos have become small 90 s "s X 60".

  I went to the program help index and sought to help with that.

  My pointer cannot open files that I need to

  What should I do to fix this?  TY

  Hi Daniel,.

  1. Are you referring to Samsung Intelli-studio?
  2. Why you have this program installed? What exactly do you want to perform?

  If you are referring to Samsung Intelli-studio please contact Samsung because it their software and there will be a better person to help you with this problem.

  Please report if you need assistance on issues related to Windows.

• Need help to open a pdf file

  I can't download a pdf file (document not a picture) and when I navigate what to open with nothing is there which will open it.  There is also the possibility to download a zip, but don't know anything about.  Anyone know how I can open it?

  Hello

  You may need to install/reinstall the latest Acrobat Reader

  Acrobat Reader - free - uncheck the Google toolbar unless you REALLY want it
  http://get.Adobe.com/reader/

  I hope this helps.

• Outlook Express won't help pls open suddenly.

  I just turned on my PC and my OE does not open, the first message that appears is tells me memory or drive may be full, which is not the case, with a code of Ox800Co13B, the other tells me that OE is unable to start because the file MSOE. DLL cannot be initialized. The version I have is OE 6.0 and Windows 8. Nothing has been changed or installed. It was working when I turned off last night and it works tonight, and that's what's happening. I'm no tech at all, so I have no idea how to get my e-mail program open now. I have so many things in there, I have and I am freaked. Pls. any help would be greatly appreciated. Since I can not in it, if there is a response back, due to the lack of work e-mail program, I'll keep checking back. Thank you all in advance.

  BAK files are backup OE files. They have something to do with OE.

  You don't have Inbox.bak or Webfire Inbox.bak files anywhere? You posted this earlier:

  Deleted items dbx.     The DBX file 187 KB (all are now showing modified as today is the date)
  Dbx air currents.                  File DBX 59KO
  The dbx files.                 File DBX 74KO
  Inbox dbx.           DBX 122 365 KB file
  Dbx in offline mode.                  File DBX 10 KB
  Outbox of dbx.                File DBX 187KO
  Dbx Pop3uidl.                File DBX 10 KB
  Dbx to sent items.        DBX 1 188 KB file
  WebFIRE 37 845 KB Inbox.dbx DBX file

  Do you have still the Inbox.dbx file and the Webfire Inbox.dbx file in the message store, or on the desktop if you did who?

  If they are still in the message store, rename them, and then drag them to the desktop.

  I'm sorry, but with all the bak files, or your own backup, it is the only tool that has a chance to recover the messages of these files
  DBXpress:
  http://www.oehelp.com/DBXpress/default.aspx

  There's no other way.

  You may need to run in the extract from disk Mode if its normal recovery mode fails to find lost messages.

  Bruce Hagen MS - MVP [Mail]

• Need help to open a Word document (~ tmp WRL0003) my ASR backup zip 1. son

  I have an operating system of Windows Vista with a Western Digital external hard drive, that I use to store my backup files. I am trying to open a Word document (~ tmp WRL0003) my external HDD automatic backup zip 1. son, but he told me that Microsoft Office Word cannot open this file because it is an unsupported file type? Can someone help me to open this file?

  Hi dcunn12,

  The question you have posted is related to Microsoft Word and would be better suited to the community of Microsoft Word.

  Please visit the link below to find a community that will support what ask you:

  http://answers.Microsoft.com/en-us/Office/Forum/Word

• I need help to open a file. __

  I have an ASPX file that I can't open. Windows said I had ak help the sender what program I use, however I can't do until Monday and I really need open this file...  What can I do?  Somebody help please...

  You should be able to open the file in Internet Explorer or another browser that you use http://www.fileinfo.com/extension/aspx.  If it does not open, you may need to set the file association.

  You may need to add aspx for file associations.  Do so right click on the file and select open with and then select Choose default program.  Select among the options provided, or if your browser is not listed select Browse and search the executable program for your browser (you should be able to get a hint by a right-click on the browser shortcut and selecting Properties and then look at a target).  Make sure that the default program.  Then the file should open in the browser.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.