Help to remove a listener with a statement "this."
Thanks in advance for the help. I have a small question:
MovieClip B 'instance' is nested inside the 'MovieClip_A '. In "MovieClip_B", I have the action to key 5 image:
this.removeEventListener (Event.ENTER_FRAME, loop);
to remove the event listener that was added in the image key, one of the same clip:
this.addEventListener (Event.ENTER_FRAME, loop);
Is it possible for me to remove this event in "MovieClip_B" listener by adding the code to remove its parent keyframe, "MovieClip_A"? I tried this example in MovieClip_A, but without success:
MovieClip_B.removeEventListener (Event.ENTER_FRAME, loop);
Thanks again for the help!
-DJ
MovieClip_B.removeEventListener (Event.ENTER_FRAME, MovieClip (parent) .loop);
Try
function activeB (): void {}
this.addEventListener (Event.ENTER_FRAME, loop);
}
function desactiveB (): void {}
this.removeEventListener (Event.ENTER_FRAME, loop);
}
of MovieClip_A
MovieClip_B.activeB)
or
MovieClip_B.desactiveB)
Tags: Adobe Animate
Similar Questions
-
I have a question why U removed the session of keyboard spelling checker is a very useful sit Apple give it in products. It helps a lot in communicting with others from different countries, even in our studies and communication with our teachers.plz it back... .hope you will do
Nothing has been deleted. Perhaps if you explain better what it is you are looking for, a person might be able to help. You mean maybe predictive text? All these settings are in settings > general > keyboard.
-
Infected with "WINDOWS DEFENDER SYSTEM." Need help to remove it.
Infected with "WINDOWS DEFENDER SYSTEM." Need help to remove it. I have Mcafee and windows Defender, but the two do not detect. It keeps poping up of fake messages and prompts you to buy some fake antispyware.
Hello
Windows Defender system is a fake antivirus, a scam to force you to pay for it, while it has no advantage at all.
Remove Windows System Defender (uninstall Guide)
http://www.bleepingcomputer.com/virus-removal/remove-Windows-system-DefenderDownload malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download it here.
Download - SAVE - go where go out you there - top - right click RUN AS ADMIN
(Then run MRT as shown above.)Malicious removal tool from Microsoft
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en-----------------------------
also install Prevx to be sure that it is all gone.
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
http://www.prevx.com/Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.asp
--------------------------------------------
Here are some free scanners online help if needed:http://www.eset.com/onlinescan/
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------
Also do to the General corruption of cleaning.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
JavaScript: Help with IF statement
I'm not familiar with Java and I fight with this IF statement and I can't make it work. I'm sure it's something pretty basic. Can anyone help? I tried everything, seeminly. In this example below I'm checking if the data that the user has entered in the field of the AAA FAVOR and if it is then put in place a message and if not then set up another message. My top node in my hierarchy is data, and then I have a MainSubform and a Contact02Subform. I have this code attached to a button and notthing happens when I click the button. If I delete the statement and have just the box of message by itself, then it will display the message box. So I know that's my statement and I'm sure it's simple. Help please?
If
(xfa.resolveNode("xfa.form.data.MainSubform.Contact02Subform.FAVOR").rawValue == 'AAA'){
xfa.host.messageBox ("my IF");else ;
xfa.host.messageBox ("my ELSE");
endif;
Try this.
If (rawValue. xfa.resolveNode("xfa.form.data.MainSubform.Contact02Subform.FAVOR") is 'AAA')
{
xfa.host.messageBox ("my IF");
}
on the other
{
xfa.host.messageBox ("my ELSE");
}
endif is used in FormCalc are generally not in JavaScript.
Thank you
Sidonie.
-
I have Outlook 2003 and you cannot remove an email with attached photos. How can I remove it?
Here are some ways to get rid of the stuck message:
1 delete a Message stuck in Outbox
1 delete messages large stuck in your Outbox
HAL
--
HAL Hostetler, TCE
Engineer senior/UPDATED--MS MVP-Print/Imaging - WA7BGX
www.kvoa.com - KVOA television, Tucson, AZ.
Live Hot Licks - www.badnewsbluesband.com -
Hello
I'm new in plsql, so I need your help. I am rewriting the existing plpgsql function plsql function, but I have an error on line 15: PLS-00103: encountered the symbol "LOOP" when expecting one of the following values:
What is the problem with the LOOP statement?
FUNCTION to CREATE or REPLACE dothework (service_name text string_value)
RETURNS the text AS
BEGIN
DECLARE
result text;
varying (31) of tempId character;
tempFieldId bigint;
text of tempStringValue;
tempCount bigint;
BEGIN
result = ";
FOR IN tempId
SELECT ce.id FROM mfc.card_element this
WHERE the ce.name AS service_name
LOOP
tempCount = 0;
SELECT INTO tempFieldId mfc.card_field CF field_id
WHERE cf.field_name = 'NPAname ';
SELECT INTO tempCount count (*) FROM mfc.card_element_field_value cefv
WHERE the cefv.card_element_id AS a tempId AND field_id = tempFieldId;
IF tempCount = 1 THEN
UPDATE mfc.card_element_field_value
SET field_string_value = string_value
WHERE the card_element_id AS a tempId AND field_id = tempFieldId;
result: = result | tempId | 'UPDATE - YES,';
ELSIF tempCount = 0 THEN
INSERT INTO mfc.card_element_field_value (id, field_date_value, field_integer_value, field_string_value, card_element_id, field_id)
VALUES (HIBERNATE_SEQUENCE.nextval,
NULL,
NULL,
string_value,
tempId,
tempFieldId);
result: = result | tempId | "INSERT - YES, ';
ON THE OTHER
result: = result | tempId | "tempCount,";
END IF;
-END IF;
END LOOP;
RETURN result;
END;
END;
I did the same refatoring I program you unit and put comments to help to understand.
Let me know if it help you
FUNCTION to CREATE or REPLACE dothework (service_name in VARCHAR2
string_value IN VARCHAR2) RETURN VARCHAR2 AS
-Not necessary to define the new block here BEGIN-
-SAYS - you only need the instruction stated in this case if you
-believe that he can raise one exceptional and you want to manage block outsider
--
-You must set the buffer of varchar2
-32767 is the largest amount
RESULT VARCHAR2 (32767).
--
-You can dock this type for the column type, you will receive the data
tempfieldid card_field.field_id%TYPE;
-tempstringvalue VARCHAR2; -you do not use this variable
tempcount NUMBER;
BEGIN
-You don't need to initialize with NULL, in this case. PLSQL has done already for you
-THE RESULT: = ";
--
-It seems to me that this request can be outside of the loop
-Once the table is not the change and the predicate doenst change is
SELECT field_id
IN tempfieldid
Card_field FC
WHERE cf.field_name = 'NPAname ';
--
FOR tempid IN (SELECT ce.id
OF card_element this
WHERE the ce.name AS service_name) LOOP
-It is not necessary to initialize this variable to zero
-tempcount: = 0;
--
--
SELECT COUNT (*)
IN tempcount
OF card_element_field_value cefv
WHERE the cefv.card_element_id AS a tempid
AND field_id = tempfieldid;
--
IF tempcount = 1 THEN
UPDATE card_element_field_value
SET field_string_value = string_value
WHERE the card_element_id AS a tempid
AND field_id = tempfieldid;
RESULT: = RESULT | tempid | 'UPDATE - YES,';
ELSIF tempcount = 0 THEN
INSERT INTO card_element_field_value
(id
field_date_value
field_integer_value
field_string_value
card_element_id
field_id)
VALUES
(hibernate_sequence.nextval
NULL
NULL
string_value
tempid
tempfieldid);
RESULT: = RESULT | tempid | "INSERT - YES, ';
ON THE OTHER
-I remove the tempCount on the "because I think you want to see the number of records
-you do business with
RESULT: = RESULT | tempid | ' ' || tempCount | ', ';
END IF;
END LOOP;
RETURN RESULT;
-END;
END;
Best regards
-
How to apply solidColor with different States in pure actionscript
Hi all
A quick question,
We can define < s:soildColor color = "0x000000" color.select = "0xcc0000" color.out ="0x0000cc" > in MXML to set soildColor with diffenrent States. " As learning actionscript, I want to know how to achieve the same goal in pure actionscript? I searched internet for hours and could not understand it. Please lend a hand.
Thanks in advance for any help.
You can probably listen to the events of 'ENTER_STATE' and "EXIT_STATE" in the container which changes the State and change the colors accordingly.
var s:SolidColor = new SolidColor (0x000000);
container.addEventListener (FlexEvent.ENTER_STATE, onStateChange);
private void onStateChange(event:FlexEvent):void
{
If ((event.target as UIComponent) .currentState == "select")
s.Color = 0xcc0000;
}
I have not tested the code, but I think it should work.
-
Rename the listener with crsctl
The listener on a server running 11.2.0.1 information is incorrect and I would change it.
crsctl stat - res shows:
NAME = ora. LISTENER.lsnr
TYPE = ora.listener.type
TARGET = OFFLINE
STATUS = OFFLINE
and it should be:
NAME = ora. LSN2U. LSNR
TYPE = ora.listener.type
How can I change this?
Thank you
Susansrvctl allows you to add a new listening port with the name that you want and remove the listener you want:
1. added new listener as user oracle. The-s option jumps port check as you would add the new listening port with the same port that your listener existing
srvctl $ add listener-l LSN2U Pei 'TCP:1521's2 remove the listener you want
$ srvctl remove listener LISTENER f-l3. start the new listener
starting at $ srvctl listener-l LSN2U4. check again listening port is running
listener srvctl status $ -
need help to remove kkash virsus
Why can't, I need help to remove the worm kkash/Rodolphe that divert my laptop used I would even turn on windows I would think MS essentials would protect me
Hello
Scan of Malware in Safe Mode with network.
http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
Once in Safe Mode with network, download and run RKill.
RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.
http://www.bleepingcomputer.com/download/rkill/
Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:
http://www.Malwarebytes.org/products/malwarebytes_free
See you soon.
-
I have a Gateway computer running Windows Vista. Everything was fine until today when the computer went crazy. It was shortly after the opening of an email in the Yahoo mail Preview window, so I can't that assume the virus came from, but I didn't click on any attachments.
Now for the hard part. I don't have any antivirus installed on my computer prior to this software. Stupid, I know. I can't go online from my computer because all that it has blocked internet access, so I can't fix it with any one of the online scanners. I also tried to install an antivirus (Kaspersky) software on the computer. In safe mode, it hangs at halfway through the installation. In normal startup mode, the program will not even attempt to install, and the computer tells me the CD I try installing from ot is a virus.
I'm out of ideas. What should I do if I can't get help in the computer? I know that I could always wipe the HD, but I don't want to lose my files.
Hi Maria239 and ajs795,
Do NOT BUY the bogus software because he won't always help in removing the fake software itself,
It takes your money.What is the name of the bogus software and the website it directs you to. We can tell you
How to remove it when we have the correct information.--------------------------------------------------------
If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be more difficult to detect as the
cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
New Vista and Windows 7 version
http://OneCare.live.com/site/en-us/Center/whatsnew.htmOriginal version
http://OneCare.live.com/site/en-us/default.htmhttp://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
help cannot burn the file with audio ac-3 to dvd
HELP A WHILE SO FAR
Hello
Thank you for the update from us.
We are sorry for the inconvenience. I'll probably help you with that.
Please provide us with more information to better understand the issue.
- Codec packs installed and when that you installed?
- Has the codec packs that is supported ac3 format?
- What other DVD burning software have you tried?
For the moment, please try the steps below and check them off, it helps to solve the problem
Step 1.
I suggest that you try to play AVI files in Windows Media Player, check if he plays well. If so, I recommend that you try to burn from in using Windows Media Player and check if it works.
For more information, please see the link on burn a CD or DVD in Windows Media Playerbelow.
burn-cd-dvd-media-player#1TC=windows-7 http://Windows.Microsoft.com/en-us/Windows/
If the steps above does not resolve the issue please try the steps below.
Step 2.
I would recommend you provide through the suggestion of rhylcolinjones of the sub thread link which looks like the similar question, you are faced with.
Hope this information can help, please post us with the State, we will be happy to help you.
Thank you.
-
OT: security.
Dear community,
Did anyone out there contacted by "windows" say you they receive notifications about a virus tries to hijack your computer and ask for help to remove the files? Initially, it was an area code 855, but now the number is unavailable. I get a lot of calls.
any help would be appreciated
Thank you
Hello
It's a scam.
Here are the tips that we regularly give the posters who receive these types of calls:
We have all the errors and warnings in our Event Viewer
Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.
You are the only person who knows if you gave them remote access.
If you gave them remote access and you do Internet banking, contact your bank, to explain, and change passwords.
If you use your online credit card, cancel and get a new one issued to you.
And the only way that willl you know that you are free to them is to backup your data and do a clean install of your operating system.
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
And Microsoft does not contact you unless YOU have made prior arrangements with them to do.
There is an article in the link I'm you provide at the end of this one
Read this Information from Microsoft:
"Avoid scams to phone for tech support.
http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx
Don't be fooled of unsolicited calls. Don't provide personal information.
Here are some of the organizations that cyber criminals claim to come:
Helpdesk Windows
Windows repair center
Microsoft technical support
Microsoft technical support
Windows Support Group Technical Department
Microsoft Research and Development Team (team of Microsoft R & D)
See you soon.
-
Help me remove the address bar at my screen
I sent my laptop in for repair and they reloaded windows 8. However, I now have this bar to address extended at the top of my screen and it does not allow anything else on the screen to go full screen. Browsers, e-mail, photos, documents, spreadsheets, everything appears under the address bar which I want to go far. I have browsers if I want an address bar. I put one on my taskbar. I don't have that on my previous windows 8 (or a person helped me remove years ago and I don't remember). How can I remove it?
I think that the problem had to do with a browser. Microsoft insisted that I upgrade to 8.1 (gave me no choice, not happy that although I was hesitant for me I need to charge a bunch of applications that does not seem to be the case). Once it is I reload Firefox that I use as my main browser and the problem has not occurred. I can't say with certainty it is Firefox, but this is what I suspect.
-
I got a license for Lightroom 5 when I bought my Leica delux 4 in 2012. It worked great, but after that I put an old hard drive on my PC (for 30 minutes - then I removed again) to get some information of this former, Lightroom now license application or try it for 30 days.
I have not installed Lightroom on a new hard drive. He is always on the same hard disk. How can I now have my Lightroom to run again using my serial number and TAN? Need help to reactivate my old serial number and the number TAN.
I use win 7.
Duplicate thread: need help to reactivate Lightroom 5 with my old serial number and the number TAN. I got a license for Lightroom 5 when I bought my Leica delux 4 in 2012.
-
Hello
Can someone help me remove my billing information (the link is broken on customer support)? Or stop the automatic renewal?
Adobe never expected to be so meri practices subscription; It's really, really bad taste.
Hi Thomas,
Please reach out to support by chat/call for payment and billing related queries.
* Be sure to stay connected with your Adobe ID before accessing the link above *.
Kind regards
Sheena
Maybe you are looking for
-
What weight work with Apple health scale
I think to buy a scale, but I want one that will record my weight in the application of health. It would be great if it has WiFi or bluetooth.What brands are compatible with the health of Apple?
-
I installed firefox, but it does not work
«Firefox can't establish a connection to...» » I uninstalled and installed Firefox back and always the same answer. Internet Explorer still works, however. All other computers in the House can still use Firefox without any problems.
-
Pavilion dv7 2120 ev: SSD HARD drive
Hello I have a 2120ev dv7 with 500 GB Serial ATA-150 - 5400 RPM laptop and I want to update to SSDS. Is this possible? If so, what SSD are compatible? Could I use SSD SATA2 or SATA3? Thank you
-
No problem in downloading books. I use the Kindle for PC app from Amazon, but not Windows 8 Kindle that application has been preloaded (also checked for update of the Windows store. "I have a Lenovo X 1 carbon Touch.
-
Dimension 4500 unable to format sister 160
I am trying to add a 160 GB Hitachi sister HARD drive as a second drive to a Dimension 4500, but when I try to format it using "Disk Management" the format reaches 100% and generates the message 'format was not completely successful. " The same messa