Pavilion dv7 2120 ev: SSD HARD drive

Similar Questions

• HP pavilion dv7 4077cl need new hard drive

  I need a new hard drive for my laptop HP pavilion dv7 4077cl entertainment.  The old man is a Toshiba MK6465gsx.  What would be compatible?  Maybe more now I have 640 GB of storage like most.  Can someone help me?

  Hello

  Yes, the HARD drive become more fat and more (capacity), becomes also more small - actually thinner - (dimension) AND cheaper too. You can use more (once again - ability) HDD from reliable suppliers/manufacturers. 750 GB or 1 TB of a WD HARD drive would be a good start - please stay with the one who has more cache and fast (7200 rpm or more).

  My suggestion: replace it with a SSD and put a larger HARD drive on the second span.

  Kind regards.

• Pavilion 550qe Desktop: is the extensible desktop Pavilion 550qe computer of SSD HARD drive and also increased the RAM?

  I buy the HP Pavilion 550qe desktop computer, and it will come with a 1 to HARD drive and 8 GB of ram.   I'll be able to open and pass at the disk for one SSD... and also, can I replace the 8 GB of RAM for 16 GB?   Is RAM welded in, or is it replaceable?  I heard that HP is very difficult to spend at home, this is true even with desktop computers?

  You are welcome!

  Yes, you can upgrade the memory.  There are two locations of memory on the motherboard.  This is the page for Specifications of the motherboard of the computer.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• Pavilion dv7 4053 cl: Pavilion dv7 4053cl adding second hard drive

  I replaced with success the stock HDD in my laptop with an SSD.

  I want to continue to use the old HDD in the laptop well, and it seems that I have a second drive Bay HARD in which HARD drive can adapt. I have not, however, see a SATA connector on the motherboard for a second HDD connection.

  There is a SATA connector to the disk HARD primary (symbols of disc 1, marked on the plastic) and there are two connectors near the RAM, which seem not to be SATA, and my optical disc drive is connected.

  Am I missing something, or is there is no place on the motherboard to connect a second HARD (well, or SSD) via SATA drive?

  GrubenM wrote:
  I replaced with success the stock HDD in my laptop with an SSD.

  I want to continue to use the old HDD in the laptop well, and it seems that I have a second drive Bay HARD in which HARD drive can adapt. I have not, however, see a SATA connector on the motherboard for a second HDD connection.

  There is a SATA connector to the disk HARD primary (symbols of disc 1, marked on the plastic) and there are two connectors near the RAM, which seem not to be SATA, and my optical disc drive is connected.

  Am I missing something, or is there is no place on the motherboard to connect a second HARD (well, or SSD) via SATA drive?

  Here's your Guide to maintenance & Service.

  It's the package, you need to add a 2nd hard drive: http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=345

• HP Pavilion DV7 - 4077cl. Second hard drive

  My DV7 has space for a second hard drive.  I buy cables to connect?

  Hello

  You definitely need disk hard mounting kit, which will have the screws, cable connector and caddy... it can be ordered here... http://PartSurfer.HP.com/search.aspx?SearchText=605415-001

  Good luck

• Win7 won't start no-Pavilion dv7-6059eo-a the hard drive failed? Contact HP?

  Hello

  I have already experienced some minor problems with my HP laptop, as crashes and freezes and error startup. Now, yesterday I came home vacation and discovered that my PC did "feel well" when I used it. Sound had been delayed and delayed, processes and programs froze frequently, including the Task Manager. I decided to just restart and went for a shower, half an hour later when I came back to my PC it was trying to close the session, without success. I used the power button to shut down physically, and when I tried to start it up, I was allowed to choose whether to start the PC normally or in "safe mode", as expected. I started normally and it has frozen on the 'Starting Windows' screen, the animation wouldn't even start.

  I waited several minutes for Windows to start and, eventually, windows cursor appeared on the screen, but it was obviously the wrong resolution (much bigger (and wider than what is proportional) and fuzzier than normal), then I got a blue background (However, this was not blue, it was like a wallpaper) and the come command prompt thingy indicating exactly what :

  Microsoft Windows Script Host Version 5.8

  Copyright Microsoft Corporation. All rights reserved.

  REM model:

  Legend of the REM: Hitachi HTS725050A9A364 ATA Device

  REM DeviceID: \\.\PHYSICALDRIVE0

  REM SCSIBus: 0

  REM SCSIPort: 0

  Scores of REM: 4

  REM PNPDeviceID: IDE\DISKHITACHI_HTS725050A9A364___PC40CH0A\5 & DDFF 3299 & 0 & 0. 0.0

  REM

  REM

  REM [RESULT]

  REM couldn't Scout because could not detect 2 hard drives on this system

  C:\System.sav\util\MBRINST. / Ini EXE C:\System .sav\util\MBR. INI/U/Q

  ECHO MBRInst returned %ERRORLEVEL% > C:\system.sav\logs\MBRINST. JOURNAL

  I leave the PC for half an hour, and when nothing happened, except at the prompt closing itself, I rebooted, it the same way as last time. This time when start I had to choose between 'start Windows normally' and 'Start Startup Repair (recommended) '. I chose the option recommended and expected (because I used to get these before the crash too). But ultimately the same black screen and the enormous-too-big-cursor appeared, then he went blue and then the command line came, stating the same message as I wrote above.

  It is, essentially, as far as I got with the PC after the evening of yesterday and today. I also noticed wave, repetative sounds coming from inside the PC, looks like a frog, very very small is trapped inside. I tried the F8 menu at startup and chose to start in "safe mode" but there is no difference.

  I would be totally grateful for help, because it was a ~ $1400 spent and I got it for a few months...

  Thank you for reading

  My

  Hello

  Error 303 would indicate a hard drive failure - this is also compatible with the freezing issues you describe leading up to this event.

  Your best option isto contact HP and arrange for the hard drive replaced under warranty.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

  

• HP pavilion dv7-4177 nr: crashed hard drive

  I have extra need to read comments on the boards.  I understand that I must make a new hard drive.  Also read you can buy casing external hard disk and plug in another computer to see if you can make files that cannot be lost. It doesn't matter if connect you to a desktop as opposed to another laptop?  Also, I know once you replace the hard drive your software has disappeared.  I don't no laptop back.  Is there a way to get a recovery disk? I'll lose everything that has been preloaded when I bought the laptop as beats audio light scribe, assistant wireless hp, amd graphics card, etc.  I hope that I am clear.  I know that I can replace the drive myself.  I was wondering if I'll be able to back up all files.

  Thank you

  Thank you for your help.  I ordered the kit from recovery disc.  See what's happening.  In the future will save my files.  You never know.  Never had any problems with my computer hp laptop so far.  The only thing I replaced to the battery and the power cord.  It's good to know I can come and ask a question and get help.

• Pavilion g6-2330ee: SSD hard drive

  Hi all

  I have HP laptop Pavilion g6-2330ee.

  My quastion is: my laptop supports the SSD hard drive?

  Thanks to you all.

  Hello

  Yes, he does. Nothing can stop it. Please use ONLY know brands.

  Kind regards.

• Pavilion G-6 2209au: Pavilion G - 6 2209au exchange for SSD HARD drive

  Hello I have this have upgraded with 6 GB ram and now want to replace the disc for one SSD HARD drive, I read in the forms some how you need to change the bios when you do so, what measures are necessary for the ssd to function? I don't like about backing up files, I'll use as an external HARD drive. Also I have the apu a4 4300 m and would like to get 10 4600 m cpu is this hard to replace or should I pay someone? Thanks for the support

  That's what you have:

  http://support.HP.com/us-en/document/c03551667

  It is the repair:

  Manual

  From the outset I see that you only have 2 GB of RAM. Very easy and inexpensive to spend at least 4 GB. See page 46.

  The motherboard is the motherboard. There is no upgrade available. However, you have the CPU AMD A4 and you might fall into a 10 - 4600M. See page 83. It would be a major update and only would no treatment faster, but would provide a slightly better video chip since it is a "APU" with processor and video on the same chip.

  Finally, you can exchange the mechanical drive to a SSD drive. The upgrade of the speed would be very noticeable.

  That @banhien meant, however, the cost of this can equal or exceed a new laptop. and almost certainly will if you need to pay a technician to do it. The first update I is the RAM, then the SSD and then the last would be the CPU. If you need any help post more come back.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• iMac mid-2010 for one SSD HARD drive replacement

  Hello

  After reflection, (mainly in the meantime my principalement en attendant mon iMac iMac starts!), I decided to replace the HDD with a SSD. After having done some research and I watch YouTube videos, I'm not sure if I have bought the right tools for the job. Could someone please help me and let me know if I'm not on the right track here.

  The iMac in question is a model 27 "2010.

  Here's what I have on order:

  • Samsung 850 EVO 500GB SSD
  • OWC online Thermal Sensor HDD upgrade 2009-2010 - https://www.amazon.co.uk/gp/product/B017OEQKV2/ref=oh_aui_detailpage_o00_s00?ie= UTF8 & PSC = 1
  • Kingston Technology 2.5 to 3.5 inches support and live for SSD - UTF8 & PSC = 1 https://www.amazon.co.uk/gp/product/B00DGL2X7I/ref=oh_aui_detailpage_o00_s00?ie=
  • 2 x cable high quality Original SATA 6 GB/s 3 - Gigabyte https://www.amazon.co.uk/gp/product/B00BBYOD3E/ref=oh_aui_detailpage_o00_s00?ie= UTF8 & PSC = 1

  I also ordered suction cups and relevant screwdrivers.

  I intend to completely remove the current HD and its replacement by the new SSD. Am I right assuming that I will just remove current thermal sensor cable and replace it with the one OWC? I'm not 100% on this one.

  Cheers in advance

  Ian

  Yes, you just remove the thermal sensor and place the OWC in line sensor (the sticker pad can be placed on the support of 2, 5-2, 5 (as the SSD will not have a lot of heat).  The longer a cable must be re-attached the logic board.

  The only suggestion I have would be - it probably need not SATA cables for this-> upgrade SSD HARD drive, thermal line sensor is long enough - in fact, too long that I had to press them to be shaped in the iMac.  Unless you plan to add other SSD in the system, since the iMac 2010 with SATA 2 (3 GB/s speed).

  Good luck

  Sam

• External SSD hard drive not detected by Airport Extreme/Time Capsule

  Hello everyone, I have the following problem:

  Framework

  -J' bought a 1 TB Samsung SSD 840 EVO internal media.

  -He is locked in a case of badges and used as an external hard drive

  -J' have an Airport Extreme (5th generation)

  -J' have a Time Capsule (4th Gen)

  -My MBP detects the SSD external hard drive when it is connected to the USB port and works fine

  Problem

  -I connect the external SSD hard drive to the USB port on both TCapsule and AExtreme, but the HD is not detected directly (USD and with powered hub of USD)

  -HD was formatted as OS x journaled Extended

  -J' tried smb and cifs via 'connect to server', but does not work.

  Any help will be greatly appreciated.

  Juan

  Unfortuantely, Apple did not update the firmware on the USB key (it is still 2.0) port on their routers for a number of years.  As a result, new USB 3.0 drives may or may not work with airports.

  Yes, we know that USB 3.0 is supposed to be backward compatible with USB 2.0 in theory, but theory does not always work in practice.

  If your drive is formatted as Mac OS extended (journaled)... also called HFS +... .and you have tried the drive with and without a USB hub powered and the reader will not be displayed with you check using the AirPort Utility disks tab... then you have one of a number of readers who do not work with routers from the airport.

  I just checked a new LaCie USB 3.0 drive I have here. It works perfectly with a Mac, but it appears not at all when I connect it to the USB port or a powered new AirPort Extreme or new Time Capsule directly, or by using a USB hub.

• Satellite L50 - A-1 DG - with the new SSD HARD drive replacement

  Satellite L50 - A - 1 DG

  I would put my SSD in the PC and install win7 on it. But it does not work.

  I try to put the SSD into the DVD rom adapter. It can not been recognized in the bios.

  I tried to replace the SSD hard drive. Then the pc cannot start up. And I can't get into the bios or adjustment.

  Someone knows what's the problem?

  > I try to put the SSD into the DVD rom adapter. It can not been recognized in the bios.

  This does not work with all models of laptops.
  As far as I know that the laptop must support Slim Select Bay and the BIOS should also support this hardware option. But in your case, it doesn t.

  One possible solution is the use of SOLID-STATE drive instead of the HARD disk.

  You said that you are not able to access the BIOS after these updates.
  Well, before you do this (a SSD drive connection) you should access the BIOS and must disable secure boot and must set the start mode MSC mode.

  The comments appreciated.

• Update a SSD HARD drive

  Hello

  I have a TouchSmart from HP Envy 15-j020eb laptop.

  But it doesn't have an SSD, so I want to replace the SSD HARD drive.

  You can do this without losing your warranty? Or not?

  Welcome them

  Hello:

  See the answer to Q17 on the link below.

  http://h40059.www4.HP.com/warranty/information/FAQ.php#17

• Replace T420s with a new SSD HARD drive

  Hello

  I wonderd if it is possible to replace with a new SSD HARD drive, while putting the HARD drive in the Bay of Ultra-slot.

  And if so, what SSD model should I buy, and how do I transfer the operating system and the data for the SSD?

  This SSD model will be compatible?

  Corsair neutron Series 120 GB SSD Sata III MLC 2.5 inches Retail

  Thank you very much

  Guy

  Yes, what you are proposing is quite feasible. You will need an adapter Ultabay to organize your HARD drive in the Ultrabay housing on your system. These are available from Lenovo, but are relatively expensive. You can get a much less expensive (~ $ 10) a compatible version on eBay. It is not as well finished as the real issue, but it works well.

  The best way to transfer everything on your SSD is "clone" of your HARD disk using a software as Acronis True Image. If your current HARD drive is made by Western Digital or Seagate you can get a free copy of Acronis on their Web site. Put the SSD in the SATA drive Bay and the HARD disk in the UtlraBay. Set the T520 to start from the Ultrabay, install/run Acronis here and make a clone for the SSD. Then boot from the SSD and you'll be all set.

  With respect to the SSD, many people here have had good success with Crucial M4, 520 Intel and Samsung 830. I guess that Corsair works perfectly as well, but I didn't know all messages from people here who have done so.

  Before ordering a SSD confirm if the HARD drive is 7 mm or 9.5 mm thick. Then order the same thickness SSD. This way, you will be able to use the metal rails caddy and rubber who now hold your HARD drive to contain the SSD.

• 17i wanted to replace SSD HARD drive

  I just bought a new screen Envy 17 t tactile image with a 1 TB HARD drive 5400 RPM. At the same time, I bought a new Samsung 840EVO 500 GB SSD with the intention to replace the slower HARD disk with the fastest SSD. I thought it would be a simple switch (I replaced the older drive in my laptop with no problems). I thought it would be a few screws and a small sign removed from underneath the laptop and everything would be made.

  But after I got the new machine, I got everything install and running and left information for the SSD HARD drive, I have everything off and returned the machine and unfortunately... There are no signs (as described in the documentation) that I expected. She only siingle piece!

  How to HARD drive to replace it? Am I supposed to remove all the screws and remove the bottom or top (where the keyboard is) does jump off and you have access from above?

  Help!

  This model requires the removal of the top cover to the hard disk:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c04339451&DocLang=en&docLocale=en_US&JumpID=reg_r1002_usen_c-001_title_r0007

  This is not a procedure authorized user and will jeopardize the warranty if something is wrong in the process.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.