Help! Try to install Silverlight, I get error "ordinal 481 not found in the dynamic link library iertutil.dll".

Similar Questions

• Error using DRC: 'the 303 ordinal not found in the dynamic link library iertutil.dll ".

  Has anyone seen this error and get an idea of how to fix it?  I have recently installed updates from April, do not know if this is related to that.

  Oddly, clicking on OK to continue to work, but this cannot be good.

  Thank you

  Mike

  Hello-

  We also received this error message after the deployment of patches to the PC.  We have had several reports of the issue and reduced the fix for the problem.  The issue seems to be caused by 2956283 (http://support.microsoft.com/kb/2956283/en-us).  We uninstalled the patch and IE11 started working again without problem.

  So far, we see only this on Windows 7/IE11 machines and Windows 8.1 does not appear to be the problem.  The behavior that we see is that IE does not open even when we receive this error message, nor can you access Internet properties via Control Panel, or trying to start running inetcpl.cpl.

  MS will be able to fix this patch or to determine what is the cause?

  Thank you

  Scott

• Get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error at boot fruity loops.

  Original title: ntdll.dll error at boot fruity loops.

  get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error when I try to start fruity loops after installing Kies from samsung for the new phone. How can I fix this error? Help, please. Thanks in advance! :)

  Hello
  I suggest you contact support FL. I couldn't find all of the resources for this program.
  Eddie B.

• Error message "the 421 ordinal not found in the dynamic link library urlmon.dll" whenever I start my computer

  Original title: 421 ordinal could not be located in the dynamic link library urlmon.dll

  I get this error every time I start my computer: "the 421 ordinal not found in the dynamic link library urlmon.dll.

  In the control panel select Problem Reports and Solutions (problem of type in)
  The START searchbox), go to the history of the problem, your mistake right click and choose
  Check the Solution.
   
  In administrative tools, choose the reliability and performance monitor and
  Click on MonitoringTools then the reliability monitor (type of reliability in research
  at startup). This list is a chart of the software installs, uninstalls, Windows
  updates and crashes by date. See if your plant started to occur after
  you installed or uninstalled something.
   
  You can clean boot
  Troubleshooting http://support.microsoft.com/kb/331796
   
  Download http://www.nirsoft.net/utils/shexview.html
  Disable all non-microsoft shell extensions (to explore) and reactivate a
  by so this can help.
  --
  ..
  --
  "Mr_Xtatic" wrote in message news: 63562fcd-7837-420-b-84e0-854170dfae5c...
  > I get this message error everytime I start my computer: "the ordinal 421.
  "> could not be located in the dynamic link library urlmon.dll"
   
   

• Error 'the procedure entry point xmlTextReaderConstName' not found in the dynamic link library libxml2.dll when you connect to the computer

  Original title:

  I get this pop-up when I connect: 'the procedure entry point not found xmlTextReaderConstName in the dynamic link library libxml2.dll.'  What should I do to fix this?

  Hello

  1. are you able to connect next to this error?

  2. are you aware of any changes made to the computer, before the show?

  Method 1:

  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2: Clean boot

  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you have finished the clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

  Method 2:

  Run a SFC system analysis and control for the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  Follow these steps.

  a. open windows Explorer, navigate to the following location:

  For 64-bit.

  C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

  For 32 bit,

  C:\Program Files \Common Files\Apple\Apple Application Support

  b. copy the file "libxml2.dll.

  c. open new windows Explorer, navigate to the following location:

  For 64-bit.

  C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support

  For 32 bit,

  C:\Program Files \Common Files\Apple\Mobile Device Support

  d. Paste the file 'libxml2.dll' at the location.

  e. restart your computer.

  I hope this helps.

• Error starting NicPrefAdapterType@ACEnumNics@@QAEAAVCBytearray@@X2 be found in the dynamic link library athcfg2ou.dll. "

  Original title: meaning of the Error Message?

  I get the following message every time I open my Windows XP that mean? and how to fix it?  "The procedure entry point? "NicPrefAdapterType@ACEnumNics@@QAEAAVCBytearray@@X2 be found in the dynamic link library athcfg2ou.dll."

  Hi Peach14,

  ·         Have you made changes on the computer before this problem?

  Start the computer in safe mode and check if the problem persists.

  http://support.Microsoft.com/kb/315222

  If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

• How to fix the error, "the procedure entry point PK11_PubDerive could not be found in the dynamic link library nss3.dll

  I use windows 7 and Firefox 39.0. Recently, when I open Firefox it gives this error, 'the entrance of procedure point PK11_PubDerive could not be located in the dynamic link library nss3.dll'. I click on the OK button, and then Firefox load without any other side effects. But this becomes quite annoying and I would not get an error message to me. I tried to uninstall Firefox (all the same when I search for it, nothing comes up) and re-install. But the message is still there. I'm lost for what to do to get rid of him. Any help would be great!

  Thank you!

  BlindingFog said

  I use windows 7 and Firefox 39.0. Recently, when I open Firefox it gives this error, 'the entrance of procedure point PK11_PubDerive could not be located in the dynamic link library nss3.dll'. I click on the OK button, and then Firefox load without any other side effects. But this becomes quite annoying and I would not get an error message to me. I tried to uninstall Firefox (all the same when I search for it, nothing comes up) and re-install. But the message is still there. I'm lost for what to do to get rid of him. Any help would be great!

  Thank you!

  I thought about it. I had Cyrstal Reports XI on my machine and when I uninstalled it the error disappeared.

• I can't open most of exe files. An error pops up saying__ (file name) point of entry not found .__The (SHRegGetValueW) procedure entry point is not found in the dynamic link library. SHLWAPI.dll__I cannot open iexp/systemrestore/entry point not found

  I can open my computer in safe mode, open the window well, but at startup I get about 10 error mesg. Rundll/SHLWAPI.dll/ I can not open the help files. System Restore does not open I get the SHLWAPI.dll error. My iexplorer option doesn't corr. My add and remove programs are filled with fix XP and Xp service pack upgrades. Like 50 of them. I can't uninstall anything. If she does about 20 to say that programs that are _____. is not working properly. My iexpl. tell it to run in compatibility mode.
  My system that I use is Microsoft (system files R) windowsXP (R)(Build2600.xpsp2.050301-1526:Service Pack 1) NTFS flight lable isDisk O. I think that I tried to upgrade the victory iexp/6 and 7, but they do not appear in Add or remove programs. I have no more disk for win xp service pack 1. But I have the serial number and the key on the side of the model code. A comp.2002 of the entry door. My Mc Update.exe is missing or corr. load (Newdev.dll) RUNDLL error. I can not access my user accounts. or my device manager. What happens with my computer is - anyone KNOW?

  If you can boot into Safe Mode with command prompt, or if you have a XP CD and you can boot into the Recovery Console, and then run the following commands.

  Chkdsk /r

  sfc/scannow (you will need an XP CD for this command)

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Not able to install kies 3 get "the procedure entry point? _xmem@Tri@STD@@YAXXZ could not be located in the dynamic link library msvcp90.dll.

  Original title: ? _xmem@tri@std@@yaxxz error

  I'm running kies 3 so I can move video from my phone to my computer, I downloaded the program and I get this error message... [THE PROCEDURE ENTRY POINT? _XMEM@TRI@STD@@YAXXZ WAS NOT FOUND IN THE DYNAMIC LINK LIBRARY MSVCP90.] DLL.] I have installed and uninstalled this program a few times now and keep the same error, I also ran Guest [sfc/scannow] and there was no breach of integrity don't know what else to do, I'm running vista 64 premium.

  This fix by installing the following:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=5582

• After you install a Foxfire 5.0 update, I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

  I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

  Do a clean reinstall.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Uninstall your current version of Firefox.
  • Do not remove the data of a personal nature when you uninstall the current version.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

• get this message at the startup of Firefox 5.0: entry procedure CERT_FindSubjectKeyIDExtension point could not be located in the dynamic link library nss3.dll

  get this message at the startup of Firefox 5.0: entry procedure CERT_FindSubjectKeyIDExtension point could not be located in the dynamic link library nss3.dll

  Hello

  You can try to install the latest version on the current: https://www.mozilla.org/en-US/firefox/new/

• When you run Formula1 2011, error that says: the 5377 ordinal could not be located in the dynamic link library xlive.dll

  5377 ordinal could not be located in the dynamic link library xlive.dll?
  shows it is when I opened formula1 2011 'the game '.
  and I have already install game for windows, please help me I did every thing but the problem is still :(

  original title: the 5377 ordinal could not be located in the dynamic link library xlive.dll

  Try to update your MICROSOFT GAMES FOR WINDOWS LIVE, simply open e it update automatically and after the game running perfectly
  Good luck

• Error 'the procedure entry point not found RtlCopyContext in the dynamic link library ntdll.dll' while clicking on

  Original title: I got this error by clicking

  Hello, I got this error by clicking on any .exe file (Anti Virus, players, etc.). "The procedure entry point rtlcopycontext could not be located in the dynamic link library ntdll.dll" Please help me because I can't start any program...

  Here is the screenshot of this error!

  http://Windows.Microsoft.com/en-us/Windows7/change-default-programs-using-set-program-access-and-computer-defaults

  Thank you very much. Problem has been resolved

• Start Windows 7 error"the procedure entry point not found objc_exception_try_enter in the dynamic link library objc.dll"

  The procedure entry point objc_exception_try_enter could not be located in the dynamic link library objc.dll

  How can I avoid that this message that appears on my desktop when I connect to my desktop computer?

  I deleted iCloud and other programs, but it still appears.

  You can try the clean boot procedure to try to ascertain what autorun program is triggering this msg

  http://support.Microsoft.com/kb/929135

• How can I fix an error that is 64 ordinal could not located in the dynamic link for f1 library xlive.dll 2011 pc game

  I want to ask that how can I correct the ordinal 64 error could not be located in the xlive.dll links Library dynamic for the performance of a pc game f1 2011 - as I'm runing win 7 64 bit

  Hello
  1. When you receive this error message?
  2. is the specific issue of the F1 2011 game?
  3. have you made changes on the computer before this problem?
  4. How do you try to play the game? Using Xbox or Windows 7 computer?

  If the F1 2011 game-specific problem then contact manufacturer:
  http://www.Formula1-game.com/UK/
   
  If you try to play the game F1 2011 with Xbox. Contact the Xbox team for assistance.
  http://support.Xbox.com/en-us/
  
  Hope the above information is helpful.