Not able to install kies 3 get "the procedure entry point? _xmem@Tri@STD@@YAXXZ could not be located in the dynamic link library msvcp90.dll.

Original title: ? _xmem@tri@std@@yaxxz error

I'm running kies 3 so I can move video from my phone to my computer, I downloaded the program and I get this error message... [THE PROCEDURE ENTRY POINT? _XMEM@TRI@STD@@YAXXZ WAS NOT FOUND IN THE DYNAMIC LINK LIBRARY MSVCP90.] DLL.] I have installed and uninstalled this program a few times now and keep the same error, I also ran Guest [sfc/scannow] and there was no breach of integrity don't know what else to do, I'm running vista 64 premium.

This fix by installing the following:

http://www.Microsoft.com/en-US/Download/details.aspx?ID=5582

Tags: Windows

Similar Questions

  • After you install a Foxfire 5.0 update, I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

    I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

    Do a clean reinstall.

    Download a new copy of Firefox and save the file to the desktop.

    • Uninstall your current version of Firefox.
    • Do not remove the data of a personal nature when you uninstall the current version.

    Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

    • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

    Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • Get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error at boot fruity loops.

    Original title: ntdll.dll error at boot fruity loops.

    get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error when I try to start fruity loops after installing Kies from samsung for the new phone. How can I fix this error? Help, please. Thanks in advance! :)

    Hello
    I suggest you contact support FL. I couldn't find all of the resources for this program.
    Eddie B.

  • get this message at the startup of Firefox 5.0: entry procedure CERT_FindSubjectKeyIDExtension point could not be located in the dynamic link library nss3.dll

    get this message at the startup of Firefox 5.0: entry procedure CERT_FindSubjectKeyIDExtension point could not be located in the dynamic link library nss3.dll

    Hello

    You can try to install the latest version on the current: https://www.mozilla.org/en-US/firefox/new/

  • 7426 ordinal could not be located in the dynamic link library mfc90u.dll

    While installing Samsung Kies, I get following error

    7426 ordinal could not be located in the dynamic link library mfc90u.dll?

    Try to download Visual C++ 2008 SP1 from the link below

    http://www.Microsoft.com/en-us/download/confirmation.aspx?ID=5582

    I also had the same problem after installing it the ordinal error went over the Kies also updated.

  • The 12404 ordinal not found in the dynamic link library mfc90u.dll.

    I get this error when trying to open Samsung Kies 3 after the new facility:

    The 12404 ordinal not found in the dynamic link library mfc90u.dll.

    This error is almost identical to the one posted here, but that the error was to 7426 ordinal and is since a couple of years.  However, I tried the recommended fix (install Visual C++ 2008 SP1) that obviously works for MANY people, but this does not change my problem.

    I have re-installed and rebooted several times, and I searched my system for the dll specified could not be found:

    -C:\Windows\winsxs\amd64_microsoft.VC90.mfc_1fc8b3b9a1e18e3b_9.0.30729.6161_none_044aad0bab1eb146 (date: 25/07/2014;) Size: 4.86 MB)

    -C:\Windows\winsxs\x86_microsoft.VC90.mfc_1fc8b3b9a1e18e3b_9.0.21022.8_none_b81d038aaf540e86 (date: 05/09/2014;) Size: 1.10 mb)

    -C:\Program Files (x 86) \Samsung\Kies3\FirmwareUpdate (Date: 07/05/2014;) Size: 3.60 MB)

    -C:\Program Files (x 86) \Samsung\Kies3 (Date: 07/05/2014;) Size: 3.60 MB)

    The first two files seem to be temporary files (dated 9/5 can come from the current installation of Visual C++).  The last two I know come with Kies 3 installation - I searched the dll both before and after the reinstallation of the product.

    If Kies 3 cannot locate the dll file in the dynamic link library, perhaps I can copy the dll in that location?  If so, where is this place?

    Other thoughts on how to fix this?

    Windows: Windows 7 Enterprise Edition, Service Pack 1

    Kies 3 Installer: Version 3.2.14083.9

    I get this error when trying to open Samsung Kies 3 after the new facility:

    The 12404 ordinal not found in the dynamic link library mfc90u.dll.

    This error is almost identical to the one posted here, but that the error was to 7426 ordinal and is since a couple of years.  However, I tried the recommended fix (install Visual C++ 2008 SP1) that obviously works for MANY people, but this does not change my problem.

    I have re-installed and rebooted several times, and I searched my system for the dll specified could not be found:

    -C:\Windows\winsxs\amd64_microsoft.VC90.mfc_1fc8b3b9a1e18e3b_9.0.30729.6161_none_044aad0bab1eb146 (date: 25/07/2014;) Size: 4.86 MB)

    -C:\Windows\winsxs\x86_microsoft.VC90.mfc_1fc8b3b9a1e18e3b_9.0.21022.8_none_b81d038aaf540e86 (date: 05/09/2014;) Size: 1.10 mb)

    -C:\Program Files (x 86) \Samsung\Kies3\FirmwareUpdate (Date: 07/05/2014;) Size: 3.60 MB)

    -C:\Program Files (x 86) \Samsung\Kies3 (Date: 07/05/2014;) Size: 3.60 MB)

    The first two files seem to be temporary files (dated 9/5 can come from the current installation of Visual C++).  The last two I know come with Kies 3 installation - I searched the dll both before and after the reinstallation of the product.

    If Kies 3 cannot locate the dll file in the dynamic link library, perhaps I can copy the dll in that location?  If so, where is this place?

    Other thoughts on how to fix this?

    Windows: Windows 7 Enterprise Edition, Service Pack 1

    Kies 3 Installer: Version 3.2.14083.9

    Installation under pakage will solve the problem

    http://www.Microsoft.com/downloads/details.aspx?FamilyId=d5692ce4-Adad-4000-abfe-64628a267ef0&displaylang=en

  • How to fix the error, "the procedure entry point PK11_PubDerive could not be found in the dynamic link library nss3.dll

    I use windows 7 and Firefox 39.0. Recently, when I open Firefox it gives this error, 'the entrance of procedure point PK11_PubDerive could not be located in the dynamic link library nss3.dll'. I click on the OK button, and then Firefox load without any other side effects. But this becomes quite annoying and I would not get an error message to me. I tried to uninstall Firefox (all the same when I search for it, nothing comes up) and re-install. But the message is still there. I'm lost for what to do to get rid of him. Any help would be great!

    Thank you!

    BlindingFog said

    I use windows 7 and Firefox 39.0. Recently, when I open Firefox it gives this error, 'the entrance of procedure point PK11_PubDerive could not be located in the dynamic link library nss3.dll'. I click on the OK button, and then Firefox load without any other side effects. But this becomes quite annoying and I would not get an error message to me. I tried to uninstall Firefox (all the same when I search for it, nothing comes up) and re-install. But the message is still there. I'm lost for what to do to get rid of him. Any help would be great!

    Thank you!

    I thought about it. I had Cyrstal Reports XI on my machine and when I uninstalled it the error disappeared.

  • McUICnt.exe - ordinal not found that 459 ordinal could not be located in the dynamic link library urlmon.dll.

    McUICnt.exe - ordinal not found that 459 ordinal could not be located in the dynamic link library urlmon.dll.
    Please tell us how to solve this error message. It does not seem to affect processes, just an annoying message that will not disappear. Help, please

    [Moved from comments]

    Hey Carol,.

    It would help if you could answer these questions.

    -What version of Windows is installed on the computer?
    -What antivirus software do you have on the computer?
    -When you get this error? It is when the computer starts for the first time?

    Here are a few troubleshooting steps that you can try to get the matter sorted.

    First of all, if you have Mcafee AntiVirus installed on the computer, turn it off for awhile and see if the error. McUICnt.exe is a file that is

    used by Mcafee and could be the reason for the error.
    Note: Antivirus should be reactivated when you have completed troubleshooting. Computer with antivirus off is: exposed to the virus.

    If Mcafee is not the cause, then try to do a scan complete antivirus on the computer in safe mode with networking using the Microsoft Safety Scanner

    Make sure that the computer is virus-free.

    Safe mode with networking: http://windows.microsoft.com/en-in/windows7/start-your-computer-in-safe-mode

    Note: the steps mentioned in the link applies to Windows vista and Windows 7.

    Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

    Let us know the results.

  • Ordinal 423 could not be located in the dynamic link library urlmon.dll

    After the download of Internet Explorer 8 and computer restart, I get the error message that the ordinal 423 could not be located in the dynamic link library urlmon.dll. I have nothing, no start menu, icons whatever it is. even when you start in safe mode. Please help me solve this problem

    Thank you

    After the download of Internet Explorer 8 and computer restart, I get the error message that the ordinal 423 could not be located in the dynamic link library urlmon.dll. I have nothing, no start menu, icons whatever it is. even when you start in safe mode. Please help me solve this problem

    Thank you

    You can either try the system restore before installing corrupt of IE8 has taken place or you can try to copy / to register theurlmon.dll in doing so:

    Click the Windows key + R key on your keyboard to open the command run and type:

    regsvr32 urlmon.dll click [Ok ] or press [Enter ] on your keyboard. Reboot and see if you can see the desktop.

    If you have still questions try clicking on the Windows of your keyboard key and open the start menu, click onall programs > Accessories > system tools > System Restore.

    How to reinstall or repair Internet Explorer in Windows Vista and Windows XP
    http://support.Microsoft.com/kb/318378/

    How to uninstall or remove Internet Explorer 8?
    http://support.Microsoft.com/kb/957700/en-us

    How to solve Internet Explorer 8 installation problems
    http://support.Microsoft.com/kb/949220/en-us
    How to solve Internet Explorer 8 installation problems
    http://support.Microsoft.com/kb/949220/en-us

    How to install Internet Explorer 8
    http://support.Microsoft.com/kb/970310/en-us

    Let us know your progress or if you need more help.

    NASS - http://www.nasstec.co.uk

  • procedure entry point _except_handler4_common could not be located in the dynamic link library msvcrt.dll

    I installed assassin creed III, but when I want to play it game this error:

    procedure entry point _except_handler4_common could not be found in the dynamic link library msvcrt.dll.
    I don't know how can I solve the problem.please help me

    Hi mosi0098,

    Welcome to Microsoft Community where you can find all the answers related to Windows. You get the error message when you try to install the game, try the steps in this article and check:

    Error message: Procedure Entry Point not found in Msvcrt.dll file

    http://support.Microsoft.com/kb/324762

    Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.

  • "the 495 ordinal not found in the dynamic link library urlmon.dll" produces 10 times every reboot

    I am running MS Vista on my laptop. Recently when I start up I get the message "the 495 ordinal not found in the dynamic link library urlmon.dll" in a popup box and must cancel 10 times before I can move forward.

    I thought somehow it may relate to a recent update that has been accepted for Skype on my system.  So I uninstalled Skype.  Attempts to reinstall Skype have failed.  the installed app, but I cannot arrive at a login screen.  Instead of the normal Skype window, I have just the bottom of loading in a web browser.

    I found a similar one but transposed ordinal error discussed 459 in the KB and I tried following many of its steps (+ my results):

    "Method 1:

    To resolve this problem in Internet Explorer, follow these steps:

    a. Quit all programs that are running.

    b. Click Start and then click Run.

    c. type regsvr32 urlmon.dll, and then click OK.

    d. When you receive the message "DllRegisterServer in urlmon.dll succeeded," click OK.

    ('DllRegisterServer in urlmon.dll' received successful)

    If this does not resolve the issue, repeat steps 2 through 4 for each of the following files (in step 3, replace Urlmon.dll with each of the names of files below):

    ·         Shdocvw.dll (failed)

    ·         Actxprxy.dll (failed)

    ·         Oleaut32.dll (failed)

    ·         Mshtml.dll (received no response)

    ·         Browseui.dll (failed)

    ·         Shell32.dll (managed)

    Method (step 2):

    I suggest you to start in safe mode and test the question.

    Safe boot mode: http://windows.microsoft.com/en-US/windows-vista/Start-your-computer-in-safe-mode

    Method (step 3):

    I suggest you perform a SFC Scan and check if it helps.

    The tool (SFC.exe) System File Checker scans missing or system corrupted files and repairs them.

    How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows: http://support.microsoft.com/kb/929833

    (SFC Scan completed successfully)

    Side note: when I started in Mode safe I immediately received an error "Microsoft Visual C++ Runtime library"Application request time to close in an unusual way"

    DavidMCandy suggested the user a list of the URLMON. Dll on the system.  I did as well.  See the file on my Onedrive to

    http://1drv.Ms/11PQ3dm

    I hope this will help you to find me a solution to my problem.

    First of all lets run a startup repair.

    This hardware test (and other things but we want to test the equipment). To do maintenance on the database and the files used by your two frequent falls (related to how windows manages system files including Windows Update). SFC is also linked to this, so we know that certain parts are working.

    After return from the logs generated.

    Startup Repair

    If your computer has a single operating system installed, repeatedly press the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again. [Correction to start - Help and Support].

    In the Display Options Options Advanced startup, use the arrow keys to highlight repair your computerand press ENTER.

    Select the Startup Repair tool.

    Startup Repair makes a log file. See C:\Windows\System32\LogFiles\Srt\SrtTrail.txt.

    To access if Windows does not start, in the Advanced Boot Options screen, use the arrow keys to select repair your computerand press ENTER.

    Select command prompt.

    Type

    type C:\Windows\System32\LogFiles\Srt\SrtTrail.txt | more

     

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     
    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     

    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     

    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

    More details about the error

    To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.
     
    To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.
     
    Start an command prompt (Start - All Programs - Accessories - command prompt) and type
     
    net helpmsg 2
     
    and it will say
     
    The system cannot find the specified file.
     
    Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

    Also check the cbs.log newspaper. You must follow these steps. You should check at the beginning and end of the troubleshooting. To make life easy, empty the file first, do the update, read the file. Otherwise, there will be tens of thousands of lines to read.

    Look for the lines saying error or failed.

    Run Microsoft Fixit

    Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

    http://support.Microsoft.com/mats/windows_update/en-us

    For the visit of the list the most comprehensive

    http://support.Microsoft.com/FixIt/en-us

    When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    del %SYSTEMROOT%\Logs\CBS\CBS.log

    Install the update

    Notepad %SYSTEMROOT%\Logs\CBS\CBS.log

    Which helps with Windows Update.

    The system update tool

    Also run the system update readiness tool

    For 32-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

    For 64-bit Windows

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

    To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

    Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

    Repair and defragment the database

    Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
     
    SC stop wuauserv
     
    stop bits SC
     
     
    SC stop cryptsvc

    Esentutl.exe/p/o c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb

    Esentutl.exe/p/o c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

    Esentutl.exe /d c:\Windows\System32\catroot2\{F750E6C3-38EE-11D1-85E5-00C04FC295EE}\catdb

     
    SC start cryptsvc
     

    SC start bits
     
    SC start wuauserv
     

    Difficulty of the Service
     
     
    Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the wuauserv_Vista_32.reg.
     
    Reset
     
    Click Start - All Programs - Accessories - right on command prompt and choose Run as administrator. Type (or copy the lines below and a blank line under and right click in the command prompt window and select Paste). This will start the dependent services in the correct order.
     
    If you get an error message you can copy by do right click in the window, choose the brand, by selecting the text and press Efriendship.
     
    SC start DCOMLaunch
    SC start RpcSs
    start wuauserv sc config = auto
    SC start wuauserv
    departure from trustedinstaller sc config = request
    SC start trustedinstaller
    SC config COMSysApp start = demand
    SC start COMSysApp
    SC config BITS start = demand
    SC start BITS
    start slsvc sc config = auto
    SC start slsvc
    SC config start = auto EventLog
    SC start EventLog


    --

  • Error 'the procedure entry point xmlTextReaderConstName' not found in the dynamic link library libxml2.dll when you connect to the computer

    Original title:

    I get this pop-up when I connect: 'the procedure entry point not found xmlTextReaderConstName in the dynamic link library libxml2.dll.'  What should I do to fix this?

    Hello

    1. are you able to connect next to this error?

    2. are you aware of any changes made to the computer, before the show?

    Method 1:

    Step 1: Safe Mode

    Start your computer in safe mode and check the number.

    Start your computer in safe mode

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Step 2: Clean boot

    If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: When you have finished the clean boot procedure, follow step 7 in the article to restore your computer to normal startup.

    Method 2:

    Run a SFC system analysis and control for the issue.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Method 3:

    Follow these steps.

    a. open windows Explorer, navigate to the following location:

    For 64-bit.

    C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

    For 32 bit,

    C:\Program Files \Common Files\Apple\Apple Application Support

    b. copy the file "libxml2.dll.

    c. open new windows Explorer, navigate to the following location:

    For 64-bit.

    C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support

    For 32 bit,

    C:\Program Files \Common Files\Apple\Mobile Device Support

    d. Paste the file 'libxml2.dll' at the location.

    e. restart your computer.

    I hope this helps.

  • The procedure entry point LdrSystemDllInitBlock could not be located in the dynamic link library ntdll.dll

    I was not able to use a particular computer since Wednesday morning, August 14, 2013.  The error dialog box. "The procedure entry point not found LdrSystemDllInitBlock in the dynamic link library ntdll.dll" on almost every application I try to open that includes IE, FireFox and Chrome browsers.  System/Windows Control Panel applications seem to work but nothing else.  I tried to do a restore of the system on several points before August 14, nothing helps.  That is that I keep getting this error on every application dialog box.  Is there one resolution other than backup can I reinstall Windows?

    Hi David,

    1. you remember changes to the computer before the show?

    2 the computer sits in a field?

    This problem may occur if the ntdll.dll file is damaged.

    Here are some ways you can follow to resolve the problem:

    Method 1:

    I suggest that you run SFC scan to check for missing or damaged system files. To do this, follow the steps mentioned in the link:
    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

    Method 2:

    I suggest you to re-register the dll (Dynamic Link Library) file from an elevated command prompt.

    a. click Start.

    b. type Cmd.exe.

    c. right-click on cmd.exe and select run as administrator.

    d. type regsvr32 ntdll.dll and press enter.

    Method 3:

    Step 1:

    You can try to start in safe mode and check if the problem persists. Only basic files and drivers needed to run Windows are started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic as possible cause device drivers. To start in safe mode follow the link.

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Step 2:

    If the problem does not occur in safe mode then boot to the desktop in normal mode and check that the third-party program is causing the problem. To configure your computer to clean boot follow the link below.

    How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
    http://support.Microsoft.com/kb/929135

    Note: See "How to reset the computer to start as usual after a clean boot troubleshooting"

    under more information to prepare the computer to start as usual after a repair.

    Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

  • the 6848 ordinal is not found in the dynamic link library mfc90u.dll

    Hello

    (I hope) a brief history of my problem:

    I am running Windows 7 Professional (64 bit) on a VM (VirtualBox software) on my computer of Linux Mint.  I tried to run a program called Filemaker Pro Runtime, (name of original file FMPROR. EXE.  First of all, I get the error "the side to side configuration is incorrect" and after a few hours of internet browsing, checking the logs etc, I found that I had to install Visual C++ Runtime (x 86, 2008 version) that I found and installed.  Only concern was the page I have d/led (which was a Microsoft page) does not mention Win 7 system requirements - I have tried to find a version for Win7, but a search increase no relevant results.  So I installed the version I found, by Windows XP, Win Server and Vista (I think it may have been an old page).  This seemed to fix the side-by-side configuration error, but now I get the error:

    the 6848 ordinal is not found in the dynamic link library mfc90u.dll

    I tried a search on the web using the above string, but the closest results, mentioning only a .dll ordinal and various different seemed not really relevant.

    I would be very grateful if someone could help me find the required information fix it, score at least me to a Web page that will help me to understand.  I'm not a geek, but I'm pretty OK with research and implementation of aid on the web, but this time, I'm confused as to how to proceed.

    Thank you very much in advance for any help received

    See you soon

    Ricky Walker

    Hello

    Version of Windows 7

    http://www.Microsoft.com/en-in/Download/details.aspx?ID=5555

    MFC Package security update Microsoft Visual C++ 2008 Service Pack 1

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=26368

    See if that helps.

  • The "procedure entry point sqlite3_prepare_v2 could not be found in the dynamic link library sqlite3.dll.

    I try to run Rosetta Stone software, however whenever I click on the application link (or shortcut) this annoying message keeps popping up that, according to the "procedure entry point sqlite3_prepare_v2 could not be found in the dynamic link library sqlite3.dll. I studied this before, and there seems to be a problem with Apple/iTunes. But when I deleted iTunes, this question always arises. If there is someone out there or in the it Department which can be useful with this question please help!

    Thank you in advance!

    Hello

    1. are you able to launch the program?

    2. What is the version of iTunes installed on your computer?

    Please follow the methods.

    Method 1:

    Run the Microsoft fixit to uninstall iTunes and check.

    See the link.

    http://support.Microsoft.com/mats/program_install_and_uninstall/

    Method 2:

    Copy the file in the Common Files\Apple\Apple Application Support folder in the Common Apple Mobile Device Support folder and check if it works very well.

Maybe you are looking for