Hai, my ipod shuffle when it is connected with the computer, it flashes organge light.  If I don't take no light

Similar Questions

• drive external hard when it is connected to the computer says hd not formatted want format you?

  drive external hard when it is connected to the computer says hd not formatted want format you? but it works fine on my other pc, the problem start when I installed registry booster please help thanks

  Hi keo1,

  We recommend that you connect the drive to a different USB port. Also run the disk check for errors.
  See check your hard drive for errors

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Perform a hard reset when you are connected to the computer?

  Hello

  my iPod Touch G 6 seems to have momentarily buggy so I connected it to the computer, after he had died and needed a charge. He didn't start the loading of the iPod screen, so I did a hard reset while it was still connected to the computer. When he turned his back, I had to enter the password on the iPod to unlock the screen before you start synchronizing with the computer.

  Desire to do harm to the iPod? I accidentally unplugged before ejecting several times, so I'm just scared.

  Thank you

  Jesse

  You have no damage to the iPod. If you disconnect the iPod is communicating with the computer, then you can alter the iPod and a restoration will probably be necessary,

• Help! The files do not appear on the rocket when it is connected to the computer

  I brought all my library Windows Media WMA and mp3s on my rocket using auto when I got it. For some reason, the "rocket" do not place files in the music folder or elsewhere, that I can find them when it is connected to my computer. The music folder is empty. The files appear on my rocket only when it is disconnected! It's a pain to remove things quickly. I really want to sort through hundreds of songs and remove them manually one at a time to make room for the new. Can someone please?

  I'm about to use my magical powers of intuition here.

  Look in settings/USB Mode. Auto-Detect, right? (Please limit your applause.)

  That's your problem. It detects a different USB mode for each computer.

  There are two modes USB, MSC and MTP, modified through parameters. There are also automatic detection, which goes to the PSG first, then of MSC if there is no player Windows Media on the computer.

  A computer can see a way or the other: just just the MTP or MSC.  The "rocket" sees all.

  DPW works with Windows Media Player. This is prbably that you have configured on your PC.

  MSC works as a generic flash/thumb/disc player. This is how you connect to the Mac.

  Solution: Connect to the PC and move the files of the "rocket" to the PC.  Change MSC mode and put them on the "rocket" in MSC mode.  When you connect to the Mac that they will be there. And when you connect to the computer, they will be there as well - but now you will see them in MSC mode.

• Sansa E280 going to update the database when it is connected to the computer

  Hello

  Just at the moment where I was getting things straightened on my drive and everything was working fine, I plugged my E280 on my computer and it says "Refresh database" on the player and my computer does not see the E280.

  I've been looking around on the forum, and there are so many different options to try (of: delete the SYSTEM folder, which I was told not; to turn off the drive and engaging the hold button and the button to rewind when connecting to the computer, etc., which I tried ~ nothing; take off Firmware and put one on; do something in Recovery Mode) , which I have no idea how do; etc.).  Sorry, but I hope you get my point... What do I do?

  Thanks for any help once more.

  Thank you clu31355.  I tried the very first thing that you said ' put in operation and allow it to update the database (if desired) before you connect. "and voila - it worked.

  These Sansas seem to be quite ticklish - who knows what will happen?

• My iPhone 6 guard making his power on and off loading when it is connected with the MacBook Air early 2015

  Hi Please help me. My iPhone 6 retains what load noise when connected with my MacBook Air early 2015. It makes me crazy! I tried with several real Apple's USB cables, update to the latest iOS (phone and MacBook), updated the iTunes, clean the orifices, everything! I just got this MacBook on the Apple store. Please help me! Thanks in advance!

  Hi mikaelaridz,

  I understand that you just bought a MacBook Air in an Apple store, and when you plug your iPhone 6 in it, you are to hear a sound indicating that the connection does not work.  If your MacBook Air has a port USB - C, you must use the USB - C for Lightning cable to connect your iPhone.

  Using the USB - C port and adapters on your MacBook (retina, 12 inch, early 2015) and later

  Port USB - C

  USB - C is an industry standard generation that allows to load and transfer of video data - while a simple connector. Your MacBook comes with a USB - C port:

  

  Through this port, you can:

  • Charge your MacBook.
  • Power output.
  • Transfer data between your MacBook and other devices.
  • Connect the video output such as HDMI, VGA and DisplayPort.
  • Connect to other technologies, such as Ethernet.

  Port USB - C on your MacBook supports data transfer speeds to up to 5 Gbps (USB 3.1 Gen 1).

  USB - C for Lightning cable

  Apple USB-C for Lightning cable allows you to connect any device equipped with a connector of lightning with your MacBook. It provides data transfer and power of lighting fixtures. For example, you can use this cable to connect your MacBook to these devices:

  • iPhone, iPad and iPod touch
  • Magic Mouse 2
  • Magic keyboard
  • The Magic Trackpad 2

  You can also load these devices without using your MacBook by connecting to the C - USB to the lightning cable and plug the cable of the USB - C 29W power adapter.

  USB - C for Lightning cable supports data transfer at up to 5 Gbps (USB 3.1 Gen 1).

  This cable requires no power to operate. However, devices that you plug into it could draw power from your MacBook, you should unplug it when you're not using it.

  If this isn't the issue, then I suggest taking your new MacBook Air and iPhone at the Apple Storewhere you bought it.  A genius can inspect your computer for you, there is no hardware problems and staff can help you set up.  Here's how Contact Apple and make an appointment.

  Take care

• IPad no charging current when it is connected to the computer, said

  Original title: why ipad indicates no current when charging connectd to computer

  My iPad needs to be reloaded, but when connected to the PC with the cable apple, says iPad not charging. Someone knows why?

  This is quite normal.  Apple has designed the iPad to the only charges when it is connected to a charger taken approved or to a USB port of high amperage only found on Apple iMac and MacBook products.  If you connect it to a PC port or non - Apple USB it will not load.

• C7180 HP printer goes offline when it is connected with the wireless network

  Hello

  I have a problem which seems to be common, but I can't find a solution simple 'step by step'.  So my apologies in advance for you who are technically much more advanced that I am and know that this has already been answered.

  I have a sony vaio laptop running Windows 7.  At home, I have a printer all-in-one HP C7180 I connected wireless on my home network.  FYI, I have a netgear wireless router.

  Once I have installed the printer on the network, everything works fine until I closed my computer.  On restarting, the printer is detected as offline by my laptop.  Now, my solution is to uninstall the printer and reinstall it.

  If someone would be kind enough to give a detailed set of step by step instructions on how to solve this problem, it would be much appreciated.  I read on the definition of a static IP address rather than dynamic, but I would need one together instructions if this is indeed the way to go.

  Thank you.

  Rich - desperate to finally solve this nuisance.

  Hi rich,

  As you mentioned that the printer goes offline after a reboot, please refer to:

  "Printer is off-line" Message appears on the computer and the HP printer does not print

• Profile of blackBerry Smartphones Sound changes when loading or connected to the computer

  I immediately noticed on my BB Curve when it is plugged into the charger or hooked up to my computer, which changes the sound profile. It's frustrating because I don't know what is happening because this isn't my normal sound profile.

  Is this a bug? If anyone else has noticed this?

  Is there a setting somewhere that I missed that causes this happens on my phone? It's my third BB and the first time it happened to me.

  Thanks in advance for your answers.

  I was going to suggest to try first, maybe they have an option to fix it properly but which could stop him doing what's done

• Take pictures when you are connected to the computer

  I have a Sony dsc-hx5v. I cover basketball and want to be able to take pictures while I'm connected to my computer via USB. Otherwise, the process of unplugging and plug makes the system must update itself, blah blah blah.

  Is it possible to take pictures while only connected via USB and photos automatically fill in PMB?

  
  

• Apps in Creative Cloud App even when Testmode is connected with the complete account adobe licensed

  Why my apps CC apply for a license, even though I just bought a full panoply of CC? The creative cloud App is running and connected to the account of the licensee (as verified in the Team Manager). The license/account is used only on this computer.

  Problem solved, there was some firewall installed.

• H233H"cable not connected" with the computer is turned off

  My H233H monitor displays an annoying blue "cable not connected" when my computer is off or in stand-by mode.  Monitor works find out otherwise and all the buttons on the front panel work.  But impossible to find a setting that will turn the monitor off when the computer stops sending a signal.

  If I unplug the cable from the monitor to the computer's HDMI, should not the monitor eventually fade or go to sleeo?  Or will she continue to display this message "cable not connected" blue indefinitely?

  Thank you

  Well, I realized that it is a problem of Acer monitor with HDMI input.

  There is no problem if I connect my H233H monitor with VGA or DVI cable.

  Just thought I'd come back and answer my own question if someone ever comes back here with a similar problem.

  Good luck...

• interruption of the wireless connection with the computer laptop and printer

  We have a printer HP6500 we lost the connection Wireless to our Dell laptop.  Whenever we need to print to bring the laptop to the floor and connect it with a cable to print.  I tried to close the printer downstairs next to the laptop and the router but it would not print wireless.  Any other suggestions?  Thank you. CK

  Hello

  Check with HP, their drivers support and online documentation and ask in their forums on any
  known issues. As OEM HP is responsible for the good operation of the printer and provided them with
  drivers.

  More than one 6500 printer
  http://WWW8.HP.com/us/en/support-drivers.html

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  Try resetting the printer with the latest drivers.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Problem with Nexus 7 connection with the computer.

  I have a Nexus 7 (2013) and I am unable to connect wireless to my PC Windows 7 Home Premium.  I can connect via a USB cable, but I really need to have a wifi connection.

  The PC does not recognize the wireless device, "add a device"produced nothing."  I would appreciate help!

  Thanks for coming back.

  Inspiron years 620 doesn't have the built-in Bluetooth function. You need to buy a Bluetooth adapter compatible with Windows 8 in a local computer store and plug it into the computer manufacturer.

  It will be useful.

• Lexmark Pro 901 printer loses connectivity with the computer

  I have a Lexmark Pinnacle Pro 901 printer I bought at the office supply store there are several moonths. I hung it, and it worked for a short period, then I got a screen prompt saying that there is no connection between the printer and the computer. I was on the phone and even authorized Lexmark technicians to have remote access to the computer 2 times. I've been on the phone with them about 10 times and had even them I would send printer back and they sent me new printer. I even had a friend local tech come and he has reinstalled printer drivers, each time, that it's the same thing, printer will work for one or two jobs and then stops printing. I can still make copies and yesterday I scanned and sent by e-mail a document, the Green WIFI light is on. I'm so frustrated that I just want to get rid of this printer. Help!

  Hi BrianParkerWX,

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
  http://support.Lexmark.com/index?locale=en&page=product&UserLocale=en&ProductCode=LEXMARK_PINNACLE_PRO901&focusedTab=downloads#1

  Additional information:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows